Merge tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 - A few SPI NOR ID definitions
 - Kill the NAND "max pagesize" restriction
 - Fix some x16 bus-width NAND support
 - Add NAND JEDEC parameter page support
 - DT bindings for NAND ECC
 - GPMI NAND updates (subpage reads)
 - More OMAP NAND refactoring
 - New STMicro SPI NOR driver (now in 40 patches!)
 - A few other random bugfixes

* tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits)
  Fix index regression in nand_read_subpage
  mtd: diskonchip: mem resource name is not optional
  mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
  mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
  mtd: omap2: Use devm_ioremap_resource()
  mtd: denali_dt: Use devm_ioremap_resource()
  mtd: devices: elm: update DRIVER_NAME as "omap-elm"
  mtd: devices: elm: configure parallel channels based on ecc_steps
  mtd: devices: elm: clean elm_load_syndrome
  mtd: devices: elm: check for hardware engine's design constraints
  mtd: st_spi_fsm: Succinctly reorganise .remove()
  mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
  mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
  mtd: st_spi_fsm: Avoid duplicating MTD core code
  mtd: st_spi_fsm: Remove useless consts from function arguments
  mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
  mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
  mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
  ...

1 files changed, 34 insertions, 0 deletions

diff --git a/drivers/of/of_mtd.c b/drivers/of/of_mtd.c
index a27ec94877e4..b7361ed70537 100644
--- a/drivers/of/of_mtd.c
+++ b/drivers/of/of_mtd.c
@@ -50,6 +50,40 @@ int of_get_nand_ecc_mode(struct device_node *np)
 EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
 
 /**
+ * of_get_nand_ecc_step_size - Get ECC step size associated to
+ * the required ECC strength (see below).
+ * @np:	Pointer to the given device_node
+ *
+ * return the ECC step size, or errno in error case.
+ */
+int of_get_nand_ecc_step_size(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+	return ret ? ret : val;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_step_size);
+
+/**
+ * of_get_nand_ecc_strength - Get required ECC strength over the
+ * correspnding step size as defined by 'nand-ecc-size'
+ * @np:	Pointer to the given device_node
+ *
+ * return the ECC strength, or errno in error case.
+ */
+int of_get_nand_ecc_strength(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+	return ret ? ret : val;
+}
+EXPORT_SYMBOL_GPL(of_get_nand_ecc_strength);
+
+/**
  * of_get_nand_bus_width - Get nand bus witdh for given device_node
  * @np:	Pointer to the given device_node
  *