of: overlay: add overlay unittest data for node names and symbols

Add nodes and properties to overlay_base and overlay dts files to
test for
   - incorrect existing node name detection when overlay node name
     has a unit-address
   - adding overlay __symbols__ properties to live tree when an
     overlay is added to the live tree

The following console messages will appear near the end of unittest
until the code errors are corrected:

   OF: Duplicate name in fairway-1, renamed to "ride@100#1"

   ### dt-test ### FAIL of_unittest_overlay_high_level():2296 Adding overlay 'overlay_bad_symbol' failed

   ### dt-test ### end of unittest - 190 passed, 1 failed

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

4 files changed, 71 insertions, 6 deletions

diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 6e00a9c69e58..2d135fba94c1 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -1,18 +1,27 @@
 obj-y += testcases.dtb.o
+
+targets += testcases.dtb testcases.dtb.S
+
+ifdef CONFIG_OF_OVERLAY
+
 obj-y += overlay.dtb.o
 obj-y += overlay_bad_phandle.dtb.o
+obj-y += overlay_bad_symbol.dtb.o
 obj-y += overlay_base.dtb.o
 
-targets += testcases.dtb testcases.dtb.S
 targets += overlay.dtb overlay.dtb.S
 targets += overlay_bad_phandle.dtb overlay_bad_phandle.dtb.S
+targets += overlay_bad_symbol.dtb overlay_bad_symbol.dtb.S
 targets += overlay_base.dtb overlay_base.dtb.S
 
-.PRECIOUS: \
-	$(obj)/%.dtb.S \
-	$(obj)/%.dtb
-
 # enable creation of __symbols__ node
 DTC_FLAGS_overlay := -@
 DTC_FLAGS_overlay_bad_phandle := -@
+DTC_FLAGS_overlay_bad_symbol := -@
 DTC_FLAGS_overlay_base := -@
+
+endif
+
+.PRECIOUS: \
+	$(obj)/%.dtb.S \
+	$(obj)/%.dtb
diff --git a/drivers/of/unittest-data/overlay.dts b/drivers/of/unittest-data/overlay.dts
index 6cd7e6a0c13e..60abf5b55cae 100644
--- a/drivers/of/unittest-data/overlay.dts
+++ b/drivers/of/unittest-data/overlay.dts
@@ -25,7 +25,22 @@
 			#size-cells = <1>;
 			status = "ok";
 
-			ride@200 {
+			ride@100 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				track@30 {
+					incline-up = < 48 32 16 >;
+				};
+
+				track@40 {
+					incline-up = < 47 31 15 >;
+				};
+			};
+
+			ride_200: ride@200 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				compatible = "ot,ferris-wheel";
 				reg = < 0x00000200 0x100 >;
 				hvac-provider = < &hvac_2 >;
@@ -36,6 +51,14 @@
 				spin-rph = < 30 >;
 				gondolas = < 16 >;
 				gondola-capacity = < 6 >;
+
+				ride_200_left: track@10 {
+					reg = < 0x00000010 0x10 >;
+				};
+
+				ride_200_right: track@20 {
+					reg = < 0x00000020 0x10 >;
+				};
 			};
 		};
 	};
diff --git a/drivers/of/unittest-data/overlay_bad_symbol.dts b/drivers/of/unittest-data/overlay_bad_symbol.dts
new file mode 100644
index 000000000000..09261cb9a67e
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_symbol.dts
@@ -0,0 +1,22 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+
+	fragment@0 {
+		target = <&electric_1>;
+
+		__overlay__ {
+
+			// This label should cause an error when the overlay
+			// is applied.  There is already a symbol hvac_1
+			// in the base tree
+			hvac_1: hvac-medium-2 {
+				compatible = "ot,hvac-medium";
+				heat-range = < 50 75 >;
+				cool-range = < 60 80 >;
+			};
+
+		};
+	};
+};
diff --git a/drivers/of/unittest-data/overlay_base.dts b/drivers/of/unittest-data/overlay_base.dts
index 5566b27fb61a..453d0bd83320 100644
--- a/drivers/of/unittest-data/overlay_base.dts
+++ b/drivers/of/unittest-data/overlay_base.dts
@@ -44,6 +44,8 @@
 			orientation = < 127 >;
 
 			ride@100 {
+				#address-cells = <1>;
+				#size-cells = <1>;
 				compatible = "ot,roller-coaster";
 				reg = < 0x00000100 0x100 >;
 				hvac-provider = < &hvac_1 >;
@@ -53,6 +55,15 @@
 				spin-controller = < &spin_ctrl_2 5 &spin_ctrl_2 7 >;
 				spin-controller-names = "track_1", "track_2";
 				queues = < 2 >;
+
+				track@30 {
+					reg = < 0x00000030 0x10 >;
+				};
+
+				track@40 {
+					reg = < 0x00000040 0x10 >;
+				};
+
 			};
 		};