summaryrefslogtreecommitdiffstats
path: root/drivers/nvmem
diff options
context:
space:
mode:
authorRavi Kumar Bokka <rbokka@codeaurora.org>2020-07-22 11:07:02 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-07-29 17:12:09 +0200
commit93b4e49f8c861cb701bfb57bac703c846b83db3b (patch)
treebef119111a8bfde828fb48101aa1e5ad2194d202 /drivers/nvmem
parenta37a15f748b41a66e1e8895f8841ab1c87e83233 (diff)
downloadlinux-93b4e49f8c861cb701bfb57bac703c846b83db3b.tar.bz2
nvmem: qfprom: Add fuse blowing support
This patch adds support for blowing fuses to the qfprom driver if the required properties are defined in the device tree. [Srini: Fixed merge conflict with AUTO ID] Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200722100705.7772-12-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/nvmem')
-rw-r--r--drivers/nvmem/qfprom.c316
1 files changed, 304 insertions, 12 deletions
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 8b425f8d847d..5e9e60e2e591 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -3,58 +3,350 @@
* Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
*/
+#include <linux/clk.h>
#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
-#include <linux/io.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+/* Blow timer clock frequency in Mhz */
+#define QFPROM_BLOW_TIMER_OFFSET 0x03c
+
+/* Amount of time required to hold charge to blow fuse in micro-seconds */
+#define QFPROM_FUSE_BLOW_POLL_US 100
+#define QFPROM_FUSE_BLOW_TIMEOUT_US 1000
+
+#define QFPROM_BLOW_STATUS_OFFSET 0x048
+#define QFPROM_BLOW_STATUS_BUSY 0x1
+#define QFPROM_BLOW_STATUS_READY 0x0
+
+#define QFPROM_ACCEL_OFFSET 0x044
+
+#define QFPROM_VERSION_OFFSET 0x0
+#define QFPROM_MAJOR_VERSION_SHIFT 28
+#define QFPROM_MAJOR_VERSION_MASK GENMASK(31, QFPROM_MAJOR_VERSION_SHIFT)
+#define QFPROM_MINOR_VERSION_SHIFT 16
+#define QFPROM_MINOR_VERSION_MASK GENMASK(27, QFPROM_MINOR_VERSION_SHIFT)
+
+static bool read_raw_data;
+module_param(read_raw_data, bool, 0644);
+MODULE_PARM_DESC(read_raw_data, "Read raw instead of corrected data");
+/**
+ * struct qfprom_soc_data - config that varies from SoC to SoC.
+ *
+ * @accel_value: Should contain qfprom accel value.
+ * @qfprom_blow_timer_value: The timer value of qfprom when doing efuse blow.
+ * @qfprom_blow_set_freq: The frequency required to set when we start the
+ * fuse blowing.
+ */
+struct qfprom_soc_data {
+ u32 accel_value;
+ u32 qfprom_blow_timer_value;
+ u32 qfprom_blow_set_freq;
+};
+
+/**
+ * struct qfprom_priv - structure holding qfprom attributes
+ *
+ * @qfpraw: iomapped memory space for qfprom-efuse raw address space.
+ * @qfpconf: iomapped memory space for qfprom-efuse configuration address
+ * space.
+ * @qfpcorrected: iomapped memory space for qfprom corrected address space.
+ * @qfpsecurity: iomapped memory space for qfprom security control space.
+ * @dev: qfprom device structure.
+ * @secclk: Clock supply.
+ * @vcc: Regulator supply.
+ * @soc_data: Data that for things that varies from SoC to SoC.
+ */
struct qfprom_priv {
- void __iomem *base;
+ void __iomem *qfpraw;
+ void __iomem *qfpconf;
+ void __iomem *qfpcorrected;
+ void __iomem *qfpsecurity;
+ struct device *dev;
+ struct clk *secclk;
+ struct regulator *vcc;
+ const struct qfprom_soc_data *soc_data;
+};
+
+/**
+ * struct qfprom_touched_values - saved values to restore after blowing
+ *
+ * @clk_rate: The rate the clock was at before blowing.
+ * @accel_val: The value of the accel reg before blowing.
+ * @timer_val: The value of the timer before blowing.
+ */
+struct qfprom_touched_values {
+ unsigned long clk_rate;
+ u32 accel_val;
+ u32 timer_val;
};
+/**
+ * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
+ * @priv: Our driver data.
+ * @old: The data that was stashed from before fuse blowing.
+ *
+ * Resets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors but doesn't return an error code
+ * since there's not much we can do upon failure.
+ */
+static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
+ const struct qfprom_touched_values *old)
+{
+ int ret;
+
+ ret = regulator_disable(priv->vcc);
+ if (ret)
+ dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
+
+ ret = clk_set_rate(priv->secclk, old->clk_rate);
+ if (ret)
+ dev_warn(priv->dev,
+ "Failed to set clock rate for disable (ignoring)\n");
+
+ clk_disable_unprepare(priv->secclk);
+
+ writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+}
+
+/**
+ * qfprom_enable_fuse_blowing() - Enable fuse blowing.
+ * @priv: Our driver data.
+ * @old: We'll stash stuff here to use when disabling.
+ *
+ * Sets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors so caller doesn't need to.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
+ struct qfprom_touched_values *old)
+{
+ int ret;
+
+ ret = clk_prepare_enable(priv->secclk);
+ if (ret) {
+ dev_err(priv->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ old->clk_rate = clk_get_rate(priv->secclk);
+ ret = clk_set_rate(priv->secclk, priv->soc_data->qfprom_blow_set_freq);
+ if (ret) {
+ dev_err(priv->dev, "Failed to set clock rate for enable\n");
+ goto err_clk_prepared;
+ }
+
+ ret = regulator_enable(priv->vcc);
+ if (ret) {
+ dev_err(priv->dev, "Failed to enable regulator\n");
+ goto err_clk_rate_set;
+ }
+
+ old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
+ writel(priv->soc_data->qfprom_blow_timer_value,
+ priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ writel(priv->soc_data->accel_value,
+ priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+ return 0;
+
+err_clk_rate_set:
+ clk_set_rate(priv->secclk, old->clk_rate);
+err_clk_prepared:
+ clk_disable_unprepare(priv->secclk);
+ return ret;
+}
+
+/**
+ * qfprom_efuse_reg_write() - Write to fuses.
+ * @context: Our driver data.
+ * @reg: The offset to write at.
+ * @_val: Pointer to data to write.
+ * @bytes: The number of bytes to write.
+ *
+ * Writes to fuses. WARNING: THIS IS PERMANENT.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_reg_write(void *context, unsigned int reg, void *_val,
+ size_t bytes)
+{
+ struct qfprom_priv *priv = context;
+ struct qfprom_touched_values old;
+ int words = bytes / 4;
+ u32 *value = _val;
+ u32 blow_status;
+ int ret;
+ int i;
+
+ dev_dbg(priv->dev,
+ "Writing to raw qfprom region : %#010x of size: %zu\n",
+ reg, bytes);
+
+ /*
+ * The hardware only allows us to write word at a time, but we can
+ * read byte at a time. Until the nvmem framework allows a separate
+ * word_size and stride for reading vs. writing, we'll enforce here.
+ */
+ if (bytes % 4) {
+ dev_err(priv->dev,
+ "%zu is not an integral number of words\n", bytes);
+ return -EINVAL;
+ }
+ if (reg % 4) {
+ dev_err(priv->dev,
+ "Invalid offset: %#x. Must be word aligned\n", reg);
+ return -EINVAL;
+ }
+
+ ret = qfprom_enable_fuse_blowing(priv, &old);
+ if (ret)
+ return ret;
+
+ ret = readl_relaxed_poll_timeout(
+ priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+ blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+ QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+ if (ret) {
+ dev_err(priv->dev,
+ "Timeout waiting for initial ready; aborting.\n");
+ goto exit_enabled_fuse_blowing;
+ }
+
+ for (i = 0; i < words; i++)
+ writel(value[i], priv->qfpraw + reg + (i * 4));
+
+ ret = readl_relaxed_poll_timeout(
+ priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+ blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+ QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+ /* Give an error, but not much we can do in this case */
+ if (ret)
+ dev_err(priv->dev, "Timeout waiting for finish.\n");
+
+exit_enabled_fuse_blowing:
+ qfprom_disable_fuse_blowing(priv, &old);
+
+ return ret;
+}
+
static int qfprom_reg_read(void *context,
unsigned int reg, void *_val, size_t bytes)
{
struct qfprom_priv *priv = context;
u8 *val = _val;
int i = 0, words = bytes;
+ void __iomem *base = priv->qfpcorrected;
+
+ if (read_raw_data && priv->qfpraw)
+ base = priv->qfpraw;
while (words--)
- *val++ = readb(priv->base + reg + i++);
+ *val++ = readb(base + reg + i++);
return 0;
}
-static struct nvmem_config econfig = {
- .name = "qfprom",
- .stride = 1,
- .word_size = 1,
- .id = NVMEM_DEVID_AUTO,
- .reg_read = qfprom_reg_read,
+static const struct qfprom_soc_data qfprom_7_8_data = {
+ .accel_value = 0xD10,
+ .qfprom_blow_timer_value = 25,
+ .qfprom_blow_set_freq = 4800000,
};
static int qfprom_probe(struct platform_device *pdev)
{
+ struct nvmem_config econfig = {
+ .name = "qfprom",
+ .stride = 1,
+ .word_size = 1,
+ .id = NVMEM_DEVID_AUTO,
+ .reg_read = qfprom_reg_read,
+ };
struct device *dev = &pdev->dev;
struct resource *res;
struct nvmem_device *nvmem;
struct qfprom_priv *priv;
+ int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ /* The corrected section is always provided */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
+ priv->qfpcorrected = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpcorrected))
+ return PTR_ERR(priv->qfpcorrected);
econfig.size = resource_size(res);
econfig.dev = dev;
econfig.priv = priv;
+ priv->dev = dev;
+
+ /*
+ * If more than one region is provided then the OS has the ability
+ * to write.
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ u32 version;
+ int major_version, minor_version;
+
+ priv->qfpraw = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpraw))
+ return PTR_ERR(priv->qfpraw);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ priv->qfpconf = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpconf))
+ return PTR_ERR(priv->qfpconf);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ priv->qfpsecurity = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpsecurity))
+ return PTR_ERR(priv->qfpsecurity);
+
+ version = readl(priv->qfpsecurity + QFPROM_VERSION_OFFSET);
+ major_version = (version & QFPROM_MAJOR_VERSION_MASK) >>
+ QFPROM_MAJOR_VERSION_SHIFT;
+ minor_version = (version & QFPROM_MINOR_VERSION_MASK) >>
+ QFPROM_MINOR_VERSION_SHIFT;
+
+ if (major_version == 7 && minor_version == 8)
+ priv->soc_data = &qfprom_7_8_data;
+
+ priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+ if (IS_ERR(priv->vcc))
+ return PTR_ERR(priv->vcc);
+
+ priv->secclk = devm_clk_get(dev, "core");
+ if (IS_ERR(priv->secclk)) {
+ ret = PTR_ERR(priv->secclk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Error getting clock: %d\n", ret);
+ return ret;
+ }
+
+ /* Only enable writing if we have SoC data. */
+ if (priv->soc_data)
+ econfig.reg_write = qfprom_reg_write;
+ }
+
nvmem = devm_nvmem_register(dev, &econfig);
return PTR_ERR_OR_ZERO(nvmem);