Merge tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 4.4-rc1.  Lots of
  different driver and subsystem updates, hwtracing being the largest
  with the addition of some new platforms that are now supported.  Full
  details in the shortlog.

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits)
  fpga: socfpga: Fix check of return value of devm_request_irq
  lkdtm: fix ACCESS_USERSPACE test
  mcb: Destroy IDA on module unload
  mcb: Do not return zero on error path in mcb_pci_probe()
  mei: bus: set the device name before running fixup
  mei: bus: use correct lock ordering
  mei: Fix debugfs filename in error output
  char: ipmi: ipmi_ssif: Replace timeval with timespec64
  fpga: zynq-fpga: Fix issue with drvdata being overwritten.
  fpga manager: remove unnecessary null pointer checks
  fpga manager: ensure lifetime with of_fpga_mgr_get
  fpga: zynq-fpga: Change fw format to handle bin instead of bit.
  fpga: zynq-fpga: Fix unbalanced clock handling
  misc: sram: partition base address belongs to __iomem space
  coresight: etm3x: adding documentation for sysFS's cpu interface
  vme: 8-bit status/id takes 256 values, not 255
  fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000
  ARM: zynq: dt: Updated devicetree for Zynq 7000 platform.
  ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager.
  ver_linux: proc/modules, limit text processing to 'sed'
  ...

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c
new file mode 100644
index 000000000000..8641319efeda
--- /dev/null
+++ b/drivers/nvmem/vf610-ocotp.c
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2015 Toradex AG.
+ *
+ * Author: Sanchayan Maity <sanchayan.maity@toradex.com>
+ *
+ * Based on the barebox ocotp driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>
+ *	Orex Computed Radiography
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* OCOTP Register Offsets */
+#define OCOTP_CTRL_REG				0x00
+#define OCOTP_CTRL_SET				0x04
+#define OCOTP_CTRL_CLR				0x08
+#define OCOTP_TIMING				0x10
+#define OCOTP_DATA				0x20
+#define OCOTP_READ_CTRL_REG			0x30
+#define OCOTP_READ_FUSE_DATA			0x40
+
+/* OCOTP Register bits and masks */
+#define OCOTP_CTRL_WR_UNLOCK			16
+#define OCOTP_CTRL_WR_UNLOCK_KEY		0x3E77
+#define OCOTP_CTRL_WR_UNLOCK_MASK		GENMASK(31, 16)
+#define OCOTP_CTRL_ADDR				0
+#define OCOTP_CTRL_ADDR_MASK			GENMASK(6, 0)
+#define OCOTP_CTRL_RELOAD_SHADOWS		BIT(10)
+#define OCOTP_CTRL_ERR				BIT(9)
+#define OCOTP_CTRL_BUSY				BIT(8)
+
+#define OCOTP_TIMING_STROBE_READ		16
+#define OCOTP_TIMING_STROBE_READ_MASK		GENMASK(21, 16)
+#define OCOTP_TIMING_RELAX			12
+#define OCOTP_TIMING_RELAX_MASK			GENMASK(15, 12)
+#define OCOTP_TIMING_STROBE_PROG		0
+#define OCOTP_TIMING_STROBE_PROG_MASK		GENMASK(11, 0)
+
+#define OCOTP_READ_CTRL_READ_FUSE		0x1
+
+#define VF610_OCOTP_TIMEOUT			100000
+
+#define BF(value, field)		(((value) << field) & field##_MASK)
+
+#define DEF_RELAX				20
+
+static const int base_to_fuse_addr_mappings[][2] = {
+	{0x400, 0x00},
+	{0x410, 0x01},
+	{0x420, 0x02},
+	{0x450, 0x05},
+	{0x4F0, 0x0F},
+	{0x600, 0x20},
+	{0x610, 0x21},
+	{0x620, 0x22},
+	{0x630, 0x23},
+	{0x640, 0x24},
+	{0x650, 0x25},
+	{0x660, 0x26},
+	{0x670, 0x27},
+	{0x6F0, 0x2F},
+	{0x880, 0x38},
+	{0x890, 0x39},
+	{0x8A0, 0x3A},
+	{0x8B0, 0x3B},
+	{0x8C0, 0x3C},
+	{0x8D0, 0x3D},
+	{0x8E0, 0x3E},
+	{0x8F0, 0x3F},
+	{0xC80, 0x78},
+	{0xC90, 0x79},
+	{0xCA0, 0x7A},
+	{0xCB0, 0x7B},
+	{0xCC0, 0x7C},
+	{0xCD0, 0x7D},
+	{0xCE0, 0x7E},
+	{0xCF0, 0x7F},
+};
+
+struct vf610_ocotp {
+	void __iomem *base;
+	struct clk *clk;
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int timing;
+};
+
+static int vf610_ocotp_wait_busy(void __iomem *base)
+{
+	int timeout = VF610_OCOTP_TIMEOUT;
+
+	while ((readl(base) & OCOTP_CTRL_BUSY) && --timeout)
+		udelay(10);
+
+	if (!timeout) {
+		writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR);
+		return -ETIMEDOUT;
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int vf610_ocotp_calculate_timing(struct vf610_ocotp *ocotp_dev)
+{
+	u32 clk_rate;
+	u32 relax, strobe_read, strobe_prog;
+	u32 timing;
+
+	clk_rate = clk_get_rate(ocotp_dev->clk);
+
+	/* Refer section OTP read/write timing parameters in TRM */
+	relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+	strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+	strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+	timing = BF(relax, OCOTP_TIMING_RELAX);
+	timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ);
+	timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG);
+
+	return timing;
+}
+
+static int vf610_get_fuse_address(int base_addr_offset)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(base_to_fuse_addr_mappings); i++) {
+		if (base_to_fuse_addr_mappings[i][0] == base_addr_offset)
+			return base_to_fuse_addr_mappings[i][1];
+	}
+
+	return -EINVAL;
+}
+
+static int vf610_ocotp_write(void *context, const void *data, size_t count)
+{
+	return 0;
+}
+
+static int vf610_ocotp_read(void *context,
+			const void *off, size_t reg_size,
+			void *val, size_t val_size)
+{
+	struct vf610_ocotp *ocotp = context;
+	void __iomem *base = ocotp->base;
+	unsigned int offset = *(u32 *)off;
+	u32 reg, *buf = val;
+	int fuse_addr;
+	int ret;
+
+	while (val_size > 0) {
+		fuse_addr = vf610_get_fuse_address(offset);
+		if (fuse_addr > 0) {
+			writel(ocotp->timing, base + OCOTP_TIMING);
+			ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG);
+			if (ret)
+				return ret;
+
+			reg = readl(base + OCOTP_CTRL_REG);
+			reg &= ~OCOTP_CTRL_ADDR_MASK;
+			reg &= ~OCOTP_CTRL_WR_UNLOCK_MASK;
+			reg |= BF(fuse_addr, OCOTP_CTRL_ADDR);
+			writel(reg, base + OCOTP_CTRL_REG);
+
+			writel(OCOTP_READ_CTRL_READ_FUSE,
+				base + OCOTP_READ_CTRL_REG);
+			ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG);
+			if (ret)
+				return ret;
+
+			if (readl(base) & OCOTP_CTRL_ERR) {
+				dev_dbg(ocotp->dev, "Error reading from fuse address %x\n",
+					fuse_addr);
+				writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR);
+			}
+
+			/*
+			 * In case of error, we do not abort and expect to read
+			 * 0xBADABADA as mentioned by the TRM. We just read this
+			 * value and return.
+			 */
+			*buf = readl(base + OCOTP_READ_FUSE_DATA);
+		} else {
+			*buf = 0;
+		}
+
+		buf++;
+		val_size--;
+		offset += reg_size;
+	}
+
+	return 0;
+}
+
+static struct regmap_bus vf610_ocotp_bus = {
+	.read = vf610_ocotp_read,
+	.write = vf610_ocotp_write,
+	.reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+	.val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static struct regmap_config ocotp_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static struct nvmem_config ocotp_config = {
+	.name = "ocotp",
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id ocotp_of_match[] = {
+	{ .compatible = "fsl,vf610-ocotp", },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, ocotp_of_match);
+
+static int vf610_ocotp_remove(struct platform_device *pdev)
+{
+	struct vf610_ocotp *ocotp_dev = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(ocotp_dev->nvmem);
+}
+
+static int vf610_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct regmap *regmap;
+	struct vf610_ocotp *ocotp_dev;
+
+	ocotp_dev = devm_kzalloc(&pdev->dev,
+			sizeof(struct vf610_ocotp), GFP_KERNEL);
+	if (!ocotp_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ocotp_dev->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ocotp_dev->base))
+		return PTR_ERR(ocotp_dev->base);
+
+	ocotp_dev->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ocotp_dev->clk)) {
+		dev_err(dev, "failed getting clock, err = %ld\n",
+			PTR_ERR(ocotp_dev->clk));
+		return PTR_ERR(ocotp_dev->clk);
+	}
+
+	ocotp_regmap_config.max_register = resource_size(res);
+	regmap = devm_regmap_init(dev,
+		&vf610_ocotp_bus, ocotp_dev, &ocotp_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "regmap init failed\n");
+		return PTR_ERR(regmap);
+	}
+	ocotp_config.dev = dev;
+
+	ocotp_dev->nvmem = nvmem_register(&ocotp_config);
+	if (IS_ERR(ocotp_dev->nvmem))
+		return PTR_ERR(ocotp_dev->nvmem);
+
+	ocotp_dev->dev = dev;
+	platform_set_drvdata(pdev, ocotp_dev);
+
+	ocotp_dev->timing = vf610_ocotp_calculate_timing(ocotp_dev);
+
+	return 0;
+}
+
+static struct platform_driver vf610_ocotp_driver = {
+	.probe = vf610_ocotp_probe,
+	.remove = vf610_ocotp_remove,
+	.driver = {
+		.name = "vf610-ocotp",
+		.of_match_table = ocotp_of_match,
+	},
+};
+module_platform_driver(vf610_ocotp_driver);
+MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
+MODULE_DESCRIPTION("Vybrid OCOTP driver");
+MODULE_LICENSE("GPL v2");