diff options
author | Christoph Hellwig <hch@lst.de> | 2018-05-25 15:41:54 +0200 |
---|---|---|
committer | Christoph Hellwig <hch@lst.de> | 2018-05-31 18:46:46 +0200 |
commit | cc456b65b739e17e8b1e6b61cc2f014f225ba466 (patch) | |
tree | 39e9442baf11c344ae8ca804863c7b4b0b3523f2 /drivers/nvme/host/fabrics.c | |
parent | fe4a97918de02d5c656f29664770e335df12e090 (diff) | |
download | linux-cc456b65b739e17e8b1e6b61cc2f014f225ba466.tar.bz2 |
nvme-fabrics: allow internal passthrough command on deleting controllers
Without this we can't cleanly shut down.
Based on analysis an an earlier patch from Hannes Reinecke.
Fixes: bb06ec31452f ("nvme: expand nvmf_check_if_ready checks")
Reported-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Diffstat (limited to 'drivers/nvme/host/fabrics.c')
-rw-r--r-- | drivers/nvme/host/fabrics.c | 79 |
1 files changed, 31 insertions, 48 deletions
diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index aa318136460e..5f5f7067c41d 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -545,71 +545,54 @@ blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl, struct request *rq, return BLK_STS_OK; switch (ctrl->state) { - case NVME_CTRL_DELETING: - goto reject_io; - case NVME_CTRL_NEW: case NVME_CTRL_CONNECTING: + case NVME_CTRL_DELETING: + /* + * This is the case of starting a new or deleting an association + * but connectivity was lost before it was fully created or torn + * down. We need to error the commands used to initialize the + * controller so the reconnect can go into a retry attempt. The + * commands should all be marked REQ_FAILFAST_DRIVER, which will + * hit the reject path below. Anything else will be queued while + * the state settles. + */ if (!is_connected) - /* - * This is the case of starting a new - * association but connectivity was lost - * before it was fully created. We need to - * error the commands used to initialize the - * controller so the reconnect can go into a - * retry attempt. The commands should all be - * marked REQ_FAILFAST_DRIVER, which will hit - * the reject path below. Anything else will - * be queued while the state settles. - */ - goto reject_or_queue_io; - - if ((queue_live && - !(nvme_req(rq)->flags & NVME_REQ_USERCMD)) || - (!queue_live && blk_rq_is_passthrough(rq) && - cmd->common.opcode == nvme_fabrics_command && - cmd->fabrics.fctype == nvme_fabrics_type_connect)) - /* - * If queue is live, allow only commands that - * are internally generated pass through. These - * are commands on the admin queue to initialize - * the controller. This will reject any ioctl - * admin cmds received while initializing. - * - * If the queue is not live, allow only a - * connect command. This will reject any ioctl - * admin cmd as well as initialization commands - * if the controller reverted the queue to non-live. - */ + break; + + /* + * If queue is live, allow only commands that are internally + * generated pass through. These are commands on the admin + * queue to initialize the controller. This will reject any + * ioctl admin cmds received while initializing. + */ + if (queue_live && !(nvme_req(rq)->flags & NVME_REQ_USERCMD)) return BLK_STS_OK; /* - * fall-thru to the reject_or_queue_io clause + * If the queue is not live, allow only a connect command. This + * will reject any ioctl admin cmd as well as initialization + * commands if the controller reverted the queue to non-live. */ + if (!queue_live && blk_rq_is_passthrough(rq) && + cmd->common.opcode == nvme_fabrics_command && + cmd->fabrics.fctype == nvme_fabrics_type_connect) + return BLK_STS_OK; break; - - /* these cases fall-thru - * case NVME_CTRL_LIVE: - * case NVME_CTRL_RESETTING: - */ default: break; } -reject_or_queue_io: /* - * Any other new io is something we're not in a state to send - * to the device. Default action is to busy it and retry it - * after the controller state is recovered. However, anything - * marked for failfast or nvme multipath is immediately failed. - * Note: commands used to initialize the controller will be - * marked for failfast. + * Any other new io is something we're not in a state to send to the + * device. Default action is to busy it and retry it after the + * controller state is recovered. However, anything marked for failfast + * or nvme multipath is immediately failed. Note: commands used to + * initialize the controller will be marked for failfast. * Note: nvme cli/ioctl commands are marked for failfast. */ if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) return BLK_STS_RESOURCE; - -reject_io: nvme_req(rq)->status = NVME_SC_ABORT_REQ; return BLK_STS_IOERR; } |