summaryrefslogtreecommitdiffstats
path: root/drivers/ntb
diff options
context:
space:
mode:
authorLogan Gunthorpe <logang@deltatee.com>2017-12-18 11:25:06 -0700
committerJon Mason <jdmason@kudzu.us>2018-01-28 22:17:23 -0500
commit1e2fd202f8593985cdadca32e0c322f98e7fe7cb (patch)
tree7311dd34491422541cc82c44d20ac2c98ac9058e /drivers/ntb
parentcbd27448faff4843ac4b66cc71445a10623ff48d (diff)
downloadlinux-1e2fd202f8593985cdadca32e0c322f98e7fe7cb.tar.bz2
ntb_hw_switchtec: Check for alignment of the buffer in mw_set_trans()
With Switchtec hardware, the buffer used for a memory window must be aligned to its size (the hardware only replaces the lower bits). In certain circumstances dma_alloc_coherent() will not provide a buffer that adheres to this requirement like when using the CMA and CONFIG_CMA_ALIGNMENT is set lower than the buffer size. When we get an unaligned buffer mw_set_trans() should return an error. We also log an error so we know the cause of the problem. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
Diffstat (limited to 'drivers/ntb')
-rw-r--r--drivers/ntb/hw/mscc/ntb_hw_switchtec.c13
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index bcd5b6fb3800..6c6f991999b5 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -320,6 +320,19 @@ static int switchtec_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx,
if (xlate_pos < 12)
return -EINVAL;
+ if (!IS_ALIGNED(addr, BIT_ULL(xlate_pos))) {
+ /*
+ * In certain circumstances we can get a buffer that is
+ * not aligned to its size. (Most of the time
+ * dma_alloc_coherent ensures this). This can happen when
+ * using large buffers allocated by the CMA
+ * (see CMA_CONFIG_ALIGNMENT)
+ */
+ dev_err(&sndev->stdev->dev,
+ "ERROR: Memory window address is not aligned to it's size!\n");
+ return -EINVAL;
+ }
+
rc = switchtec_ntb_part_op(sndev, ctl, NTB_CTRL_PART_OP_LOCK,
NTB_CTRL_PART_STATUS_LOCKED);
if (rc)