diff options
author | Christophe Ricard <christophe.ricard@gmail.com> | 2015-10-25 22:54:36 +0100 |
---|---|---|
committer | Samuel Ortiz <sameo@linux.intel.com> | 2015-10-27 03:55:01 +0100 |
commit | b1fa4dc4ffef843bda17f26bbf54fb5d8bc23d2b (patch) | |
tree | 23444be92a93ba3c6d0f84bff6b522ac92d7023b /drivers/nfc/st-nci/st-nci.h | |
parent | ba723199d18eeb5021cd6ace4aaf90670d6b3133 (diff) | |
download | linux-b1fa4dc4ffef843bda17f26bbf54fb5d8bc23d2b.tar.bz2 |
NFC: st-nci: Add support for proprietary commands
Add support for proprietary commands useful mainly for
factory testings. Here is a list:
- FACTORY_MODE: Allow to set the driver into a mode where
no secure element are activated. It does not consider any
NFC_ATTR_VENDOR_DATA.
- HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes
command. It does not consider any NFC_ATTR_VENDOR_DATA.
- HCI_DM_PUT_DATA: Allow to configure specific CLF registry
like for example RF trimmings or low level drivers
configurations (I2C, SPI, SWP).
- HCI_DM_UPDATE_AID: Allow to configure an AID routing into the
CLF routing table following RF technology, CLF mode or protocol.
- HCI_DM_GET_INFO: Allow to retrieve CLF information.
- HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as
low level drivers configurations or RF trimmings.
- HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF.
A complete packet can be more than 8KB.
- HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
configuration changes without CLF power off.
- HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example
the white list).
- HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
technology. When using this command to anti-collision is done.
- HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF
connectivity.
- HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied
on the CLF antenna. A value between 0 and 0x0f is returned. 0 is
maximum.
- HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode.
It is a specific CLF command as there is no GPIO for this.
- HCI_DM_FWUPD_END: Allow to complete firmware update.
- HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied
on the CLF antenna to a reference value.
- MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
received during a NCI_CORE_INIT_CMD.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/nfc/st-nci/st-nci.h')
-rw-r--r-- | drivers/nfc/st-nci/st-nci.h | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/drivers/nfc/st-nci/st-nci.h b/drivers/nfc/st-nci/st-nci.h index 90c21eab3058..9c9bb19cc9ff 100644 --- a/drivers/nfc/st-nci/st-nci.h +++ b/drivers/nfc/st-nci/st-nci.h @@ -34,6 +34,11 @@ #define ST_NCI_ESE_MAX_LENGTH 33 #define ST_NCI_HCI_HOST_ID_ESE 0xc0 +#define ST_NCI_DEVICE_MGNT_GATE 0x01 + +#define ST_NCI_VENDOR_OUI 0x0080E1 /* STMicroelectronics */ +#define ST_NCI_FACTORY_MODE 2 + struct nci_mode_set_cmd { u8 cmd_type; u8 mode; @@ -60,10 +65,69 @@ struct st_nci_se_info { void *cb_context; }; +/** + * enum nfc_vendor_cmds - supported nfc vendor commands + * + * @FACTORY_MODE: Allow to set the driver into a mode where no secure element + * are activated. It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. + * It does not consider any NFC_ATTR_VENDOR_DATA. + * @HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example + * RF trimmings or low level drivers configurations (I2C, SPI, SWP). + * @HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing + * table following RF technology, CLF mode or protocol. + * @HCI_DM_GET_INFO: Allow to retrieve CLF information. + * @HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low + * level drivers configurations or RF trimmings. + * @HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete + * packet can be more than 8KB. + * @HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF + * configuration changes without CLF power off. + * @HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the + * white list). + * @HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF + * technology. When using this command to anti-collision is done. + * @HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF + * connectivity. + * @HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the + * CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum. + * @HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a + * specific CLF command as there is no GPIO for this. + * @HCI_DM_FWUPD_END: Allow to complete firmware update. + * @HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the + * CLF antenna to a reference value. + * @MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data + * received during a NCI_CORE_INIT_CMD. + */ +enum nfc_vendor_cmds { + FACTORY_MODE, + HCI_CLEAR_ALL_PIPES, + HCI_DM_PUT_DATA, + HCI_DM_UPDATE_AID, + HCI_DM_GET_INFO, + HCI_DM_GET_DATA, + HCI_DM_DIRECT_LOAD, + HCI_DM_RESET, + HCI_GET_PARAM, + HCI_DM_FIELD_GENERATOR, + HCI_LOOPBACK, + HCI_DM_FWUPD_START, + HCI_DM_FWUPD_END, + HCI_DM_VDC_MEASUREMENT_VALUE, + HCI_DM_VDC_VALUE_COMPARISON, + MANUFACTURER_SPECIFIC, +}; + +struct st_nci_vendor_info { + struct completion req_completion; + struct sk_buff *rx_skb; +}; + struct st_nci_info { struct llt_ndlc *ndlc; unsigned long flags; struct st_nci_se_info se_info; + struct st_nci_vendor_info vendor_info; }; void st_nci_remove(struct nci_dev *ndev); @@ -85,4 +149,8 @@ void st_nci_hci_event_received(struct nci_dev *ndev, u8 pipe, void st_nci_hci_cmd_received(struct nci_dev *ndev, u8 pipe, u8 cmd, struct sk_buff *skb); +void st_nci_hci_loopback_event_received(struct nci_dev *ndev, u8 event, + struct sk_buff *skb); +int st_nci_vendor_cmds_init(struct nci_dev *ndev); + #endif /* __LOCAL_ST_NCI_H_ */ |