Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Two easy cases of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

19 files changed, 72 insertions, 31 deletions

diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index 9e07b469066a..156fbc5601ca 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -1721,7 +1721,7 @@ static void atl1_inc_smb(struct atl1_adapter *adapter)
 	adapter->soft_stats.scc += smb->tx_1_col;
 	adapter->soft_stats.mcc += smb->tx_2_col;
 	adapter->soft_stats.latecol += smb->tx_late_col;
-	adapter->soft_stats.tx_underun += smb->tx_underrun;
+	adapter->soft_stats.tx_underrun += smb->tx_underrun;
 	adapter->soft_stats.tx_trunc += smb->tx_trunc;
 	adapter->soft_stats.tx_pause += smb->tx_pause;
 
@@ -3179,7 +3179,7 @@ static struct atl1_stats atl1_gstrings_stats[] = {
 	{"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
 	{"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
 	{"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
-	{"tx_underun", ATL1_STAT(soft_stats.tx_underun)},
+	{"tx_underrun", ATL1_STAT(soft_stats.tx_underrun)},
 	{"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
 	{"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
 	{"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h
index 34a58cd846a0..eacff19ea05b 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.h
+++ b/drivers/net/ethernet/atheros/atlx/atl1.h
@@ -681,7 +681,7 @@ struct atl1_sft_stats {
 	u64 scc;		/* packets TX after a single collision */
 	u64 mcc;		/* packets TX after multiple collisions */
 	u64 latecol;		/* TX packets w/ late collisions */
-	u64 tx_underun;		/* TX packets aborted due to TX FIFO underrun
+	u64 tx_underrun;	/* TX packets aborted due to TX FIFO underrun
 				 * or TRD FIFO underrun */
 	u64 tx_trunc;		/* TX packets truncated due to size > MTU */
 	u64 rx_pause;		/* num Pause packets received. */
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index d99317b3d891..98da0fa27192 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -553,7 +553,7 @@ static void atl2_intr_tx(struct atl2_adapter *adapter)
 			netdev->stats.tx_aborted_errors++;
 		if (txs->late_col)
 			netdev->stats.tx_window_errors++;
-		if (txs->underun)
+		if (txs->underrun)
 			netdev->stats.tx_fifo_errors++;
 	} while (1);
 
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.h b/drivers/net/ethernet/atheros/atlx/atl2.h
index c64a6bdfa7ae..25ec84cb4853 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.h
+++ b/drivers/net/ethernet/atheros/atlx/atl2.h
@@ -260,7 +260,7 @@ struct tx_pkt_status {
 	unsigned multi_col:1;
 	unsigned late_col:1;
 	unsigned abort_col:1;
-	unsigned underun:1;	/* current packet is aborted
+	unsigned underrun:1;	/* current packet is aborted
 				 * due to txram underrun */
 	unsigned:3;		/* reserved */
 	unsigned update:1;	/* always 1'b1 in tx_status_buf */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
index c3d4efbf60ba..399957104f9d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c
@@ -33,6 +33,26 @@
 #include <linux/bpf_trace.h>
 #include "en/xdp.h"
 
+int mlx5e_xdp_max_mtu(struct mlx5e_params *params)
+{
+	int hr = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
+
+	/* Let S := SKB_DATA_ALIGN(sizeof(struct skb_shared_info)).
+	 * The condition checked in mlx5e_rx_is_linear_skb is:
+	 *   SKB_DATA_ALIGN(sw_mtu + hard_mtu + hr) + S <= PAGE_SIZE         (1)
+	 *   (Note that hw_mtu == sw_mtu + hard_mtu.)
+	 * What is returned from this function is:
+	 *   max_mtu = PAGE_SIZE - S - hr - hard_mtu                         (2)
+	 * After assigning sw_mtu := max_mtu, the left side of (1) turns to
+	 * SKB_DATA_ALIGN(PAGE_SIZE - S) + S, which is equal to PAGE_SIZE,
+	 * because both PAGE_SIZE and S are already aligned. Any number greater
+	 * than max_mtu would make the left side of (1) greater than PAGE_SIZE,
+	 * so max_mtu is the maximum MTU allowed.
+	 */
+
+	return MLX5E_HW2SW_MTU(params, SKB_MAX_HEAD(hr));
+}
+
 static inline bool
 mlx5e_xmit_xdp_buff(struct mlx5e_xdpsq *sq, struct mlx5e_dma_info *di,
 		    struct xdp_buff *xdp)
@@ -310,9 +330,9 @@ bool mlx5e_poll_xdpsq_cq(struct mlx5e_cq *cq, struct mlx5e_rq *rq)
 					mlx5e_xdpi_fifo_pop(xdpi_fifo);
 
 				if (is_redirect) {
-					xdp_return_frame(xdpi.xdpf);
 					dma_unmap_single(sq->pdev, xdpi.dma_addr,
 							 xdpi.xdpf->len, DMA_TO_DEVICE);
+					xdp_return_frame(xdpi.xdpf);
 				} else {
 					/* Recycle RX page */
 					mlx5e_page_release(rq, &xdpi.di, true);
@@ -351,9 +371,9 @@ void mlx5e_free_xdpsq_descs(struct mlx5e_xdpsq *sq, struct mlx5e_rq *rq)
 				mlx5e_xdpi_fifo_pop(xdpi_fifo);
 
 			if (is_redirect) {
-				xdp_return_frame(xdpi.xdpf);
 				dma_unmap_single(sq->pdev, xdpi.dma_addr,
 						 xdpi.xdpf->len, DMA_TO_DEVICE);
+				xdp_return_frame(xdpi.xdpf);
 			} else {
 				/* Recycle RX page */
 				mlx5e_page_release(rq, &xdpi.di, false);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h
index 858e7a2a13ca..8b537a4b0840 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h
@@ -34,13 +34,12 @@
 
 #include "en.h"
 
-#define MLX5E_XDP_MAX_MTU ((int)(PAGE_SIZE - \
-				 MLX5_SKB_FRAG_SZ(XDP_PACKET_HEADROOM)))
 #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
 #define MLX5E_XDP_TX_EMPTY_DS_COUNT \
 	(sizeof(struct mlx5e_tx_wqe) / MLX5_SEND_WQE_DS)
 #define MLX5E_XDP_TX_DS_COUNT (MLX5E_XDP_TX_EMPTY_DS_COUNT + 1 /* SG DS */)
 
+int mlx5e_xdp_max_mtu(struct mlx5e_params *params);
 bool mlx5e_xdp_handle(struct mlx5e_rq *rq, struct mlx5e_dma_info *di,
 		      void *va, u16 *rx_headroom, u32 *len);
 bool mlx5e_poll_xdpsq_cq(struct mlx5e_cq *cq, struct mlx5e_rq *rq);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 76a3d01a489e..78dc8fe2a83c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1586,7 +1586,7 @@ static int mlx5e_get_module_info(struct net_device *netdev,
 		break;
 	case MLX5_MODULE_ID_SFP:
 		modinfo->type       = ETH_MODULE_SFF_8472;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		modinfo->eeprom_len = MLX5_EEPROM_PAGE_LENGTH;
 		break;
 	default:
 		netdev_err(priv->netdev, "%s: cable type not recognized:0x%x\n",
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 69a9d67396ec..2a5820f8c6eb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3720,7 +3720,7 @@ int mlx5e_change_mtu(struct net_device *netdev, int new_mtu,
 	if (params->xdp_prog &&
 	    !mlx5e_rx_is_linear_skb(&new_channels.params)) {
 		netdev_err(netdev, "MTU(%d) > %d is not allowed while XDP enabled\n",
-			   new_mtu, MLX5E_XDP_MAX_MTU);
+			   new_mtu, mlx5e_xdp_max_mtu(params));
 		err = -EINVAL;
 		goto out;
 	}
@@ -4161,7 +4161,8 @@ static int mlx5e_xdp_allowed(struct mlx5e_priv *priv, struct bpf_prog *prog)
 
 	if (!mlx5e_rx_is_linear_skb(&new_channels.params)) {
 		netdev_warn(netdev, "XDP is not allowed with MTU(%d) > %d\n",
-			    new_channels.params.sw_mtu, MLX5E_XDP_MAX_MTU);
+			    new_channels.params.sw_mtu,
+			    mlx5e_xdp_max_mtu(&new_channels.params));
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c
index 21b7f05b16a5..361468e0435d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c
@@ -317,10 +317,6 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
 		size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
 
 	i2c_addr = MLX5_I2C_ADDR_LOW;
-	if (offset >= MLX5_EEPROM_PAGE_LENGTH) {
-		i2c_addr = MLX5_I2C_ADDR_HIGH;
-		offset -= MLX5_EEPROM_PAGE_LENGTH;
-	}
 
 	MLX5_SET(mcia_reg, in, l, 0);
 	MLX5_SET(mcia_reg, in, module, module_num);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
index ffee38e36ce8..8648ca171254 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci_hw.h
@@ -27,7 +27,7 @@
 
 #define MLXSW_PCI_SW_RESET			0xF0010
 #define MLXSW_PCI_SW_RESET_RST_BIT		BIT(0)
-#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS	13000
+#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS	20000
 #define MLXSW_PCI_SW_RESET_WAIT_MSECS		100
 #define MLXSW_PCI_FW_READY			0xA1844
 #define MLXSW_PCI_FW_READY_MASK			0xFFFF
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index a1c2b117a2b3..12b176d1d6ef 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -3113,11 +3113,11 @@ mlxsw_sp_port_set_link_ksettings(struct net_device *dev,
 	if (err)
 		return err;
 
+	mlxsw_sp_port->link.autoneg = autoneg;
+
 	if (!netif_running(dev))
 		return 0;
 
-	mlxsw_sp_port->link.autoneg = autoneg;
-
 	mlxsw_sp_port_admin_status_set(mlxsw_sp_port, false);
 	mlxsw_sp_port_admin_status_set(mlxsw_sp_port, true);
 
@@ -3303,7 +3303,7 @@ static int mlxsw_sp_port_ets_init(struct mlxsw_sp_port *mlxsw_sp_port)
 		err = mlxsw_sp_port_ets_set(mlxsw_sp_port,
 					    MLXSW_REG_QEEC_HIERARCY_TC,
 					    i + 8, i,
-					    false, 0);
+					    true, 100);
 		if (err)
 			return err;
 	}
diff --git a/drivers/net/ethernet/netronome/nfp/abm/cls.c b/drivers/net/ethernet/netronome/nfp/abm/cls.c
index 9852080cf454..ff3913085665 100644
--- a/drivers/net/ethernet/netronome/nfp/abm/cls.c
+++ b/drivers/net/ethernet/netronome/nfp/abm/cls.c
@@ -39,7 +39,7 @@ nfp_abm_u32_check_knode(struct nfp_abm *abm, struct tc_cls_u32_knode *knode,
 	}
 	if (knode->sel->off || knode->sel->offshift || knode->sel->offmask ||
 	    knode->sel->offoff || knode->fshift) {
-		NL_SET_ERR_MSG_MOD(extack, "variable offseting not supported");
+		NL_SET_ERR_MSG_MOD(extack, "variable offsetting not supported");
 		return false;
 	}
 	if (knode->sel->hoff || knode->sel->hmask) {
@@ -78,7 +78,7 @@ nfp_abm_u32_check_knode(struct nfp_abm *abm, struct tc_cls_u32_knode *knode,
 
 	k = &knode->sel->keys[0];
 	if (k->offmask) {
-		NL_SET_ERR_MSG_MOD(extack, "offset mask - variable offseting not supported");
+		NL_SET_ERR_MSG_MOD(extack, "offset mask - variable offsetting not supported");
 		return false;
 	}
 	if (k->off) {
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index a18149720aa2..cba5881b2746 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -673,7 +673,8 @@ static void netsec_process_tx(struct netsec_priv *priv)
 }
 
 static void *netsec_alloc_rx_data(struct netsec_priv *priv,
-				  dma_addr_t *dma_handle, u16 *desc_len)
+				  dma_addr_t *dma_handle, u16 *desc_len,
+				  bool napi)
 {
 	size_t total_len = SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
 	size_t payload_len = NETSEC_RX_BUF_SZ;
@@ -682,7 +683,7 @@ static void *netsec_alloc_rx_data(struct netsec_priv *priv,
 
 	total_len += SKB_DATA_ALIGN(payload_len + NETSEC_SKB_PAD);
 
-	buf = napi_alloc_frag(total_len);
+	buf = napi ? napi_alloc_frag(total_len) : netdev_alloc_frag(total_len);
 	if (!buf)
 		return NULL;
 
@@ -765,7 +766,8 @@ static int netsec_process_rx(struct netsec_priv *priv, int budget)
 		/* allocate a fresh buffer and map it to the hardware.
 		 * This will eventually replace the old buffer in the hardware
 		 */
-		buf_addr = netsec_alloc_rx_data(priv, &dma_handle, &desc_len);
+		buf_addr = netsec_alloc_rx_data(priv, &dma_handle, &desc_len,
+						true);
 		if (unlikely(!buf_addr))
 			break;
 
@@ -1069,7 +1071,8 @@ static int netsec_setup_rx_dring(struct netsec_priv *priv)
 		void *buf;
 		u16 len;
 
-		buf = netsec_alloc_rx_data(priv, &dma_handle, &len);
+		buf = netsec_alloc_rx_data(priv, &dma_handle, &len,
+					   false);
 		if (!buf) {
 			netsec_uninit_pkt_dring(priv, NETSEC_RING_RX);
 			goto err_out;
diff --git a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
index b7dd4e3c760d..6d690678c20e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/norm_desc.c
@@ -140,7 +140,7 @@ static void ndesc_init_rx_desc(struct dma_desc *p, int disable_rx_ic, int mode,
 	p->des0 |= cpu_to_le32(RDES0_OWN);
 
 	bfsize1 = min(bfsize, BUF_SIZE_2KiB - 1);
-	p->des1 |= cpu_to_le32(bfsize & RDES1_BUFFER1_SIZE_MASK);
+	p->des1 |= cpu_to_le32(bfsize1 & RDES1_BUFFER1_SIZE_MASK);
 
 	if (mode == STMMAC_CHAIN_MODE)
 		ndesc_rx_set_on_chain(p, end);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 7a895a2889e3..5ab2733e15e2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2616,8 +2616,6 @@ static int stmmac_open(struct net_device *dev)
 	u32 chan;
 	int ret;
 
-	stmmac_check_ether_addr(priv);
-
 	if (priv->hw->pcs != STMMAC_PCS_RGMII &&
 	    priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI) {
@@ -4303,6 +4301,8 @@ int stmmac_dvr_probe(struct device *device,
 	if (ret)
 		goto error_hw_init;
 
+	stmmac_check_ether_addr(priv);
+
 	/* Configure real RX and TX queues */
 	netif_set_real_num_rx_queues(ndev, priv->plat->rx_queues_to_use);
 	netif_set_real_num_tx_queues(ndev, priv->plat->tx_queues_to_use);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
index d819e8eaba12..cc1e887e47b5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -159,6 +159,12 @@ static const struct dmi_system_id quark_pci_dmi[] = {
 		},
 		.driver_data = (void *)&galileo_stmmac_dmi_data,
 	},
+	/*
+	 * There are 2 types of SIMATIC IOT2000: IOT20202 and IOT2040.
+	 * The asset tag "6ES7647-0AA00-0YA2" is only for IOT2020 which
+	 * has only one pci network device while other asset tags are
+	 * for IOT2040 which has two.
+	 */
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
@@ -170,8 +176,6 @@ static const struct dmi_system_id quark_pci_dmi[] = {
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
-			DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
-					"6ES7647-0AA00-1YA2"),
 		},
 		.driver_data = (void *)&iot2040_stmmac_dmi_data,
 	},
diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index 92b64e254b44..7475cef17cf7 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -159,6 +159,14 @@ static const struct spi_device_id ks8995_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, ks8995_id);
 
+static const struct of_device_id ks8895_spi_of_match[] = {
+        { .compatible = "micrel,ks8995" },
+        { .compatible = "micrel,ksz8864" },
+        { .compatible = "micrel,ksz8795" },
+        { },
+ };
+MODULE_DEVICE_TABLE(of, ks8895_spi_of_match);
+
 static inline u8 get_chip_id(u8 val)
 {
 	return (val >> ID1_CHIPID_S) & ID1_CHIPID_M;
@@ -526,6 +534,7 @@ static int ks8995_remove(struct spi_device *spi)
 static struct spi_driver ks8995_driver = {
 	.driver = {
 		.name	    = "spi-ks8995",
+		.of_match_table = of_match_ptr(ks8895_spi_of_match),
 	},
 	.probe	  = ks8995_probe,
 	.remove	  = ks8995_remove,
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 699a8870e928..eb4711bfc52a 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1154,6 +1154,13 @@ static int team_port_add(struct team *team, struct net_device *port_dev,
 		return -EINVAL;
 	}
 
+	if (netdev_has_upper_dev(dev, port_dev)) {
+		NL_SET_ERR_MSG(extack, "Device is already an upper device of the team interface");
+		netdev_err(dev, "Device %s is already an upper device of the team interface\n",
+			   portname);
+		return -EBUSY;
+	}
+
 	if (port_dev->features & NETIF_F_VLAN_CHALLENGED &&
 	    vlan_uses_dev(dev)) {
 		NL_SET_ERR_MSG(extack, "Device is VLAN challenged and team device has VLAN set up");
diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index ce711e5f8c5d..cf7e6a92e73c 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -873,6 +873,7 @@ static const struct net_device_ops vrf_netdev_ops = {
 	.ndo_init		= vrf_dev_init,
 	.ndo_uninit		= vrf_dev_uninit,
 	.ndo_start_xmit		= vrf_xmit,
+	.ndo_set_mac_address	= eth_mac_addr,
 	.ndo_get_stats64	= vrf_get_stats64,
 	.ndo_add_slave		= vrf_add_slave,
 	.ndo_del_slave		= vrf_del_slave,
@@ -1272,6 +1273,7 @@ static void vrf_setup(struct net_device *dev)
 	/* default to no qdisc; user can add if desired */
 	dev->priv_flags |= IFF_NO_QUEUE;
 	dev->priv_flags |= IFF_NO_RX_HANDLER;
+	dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
 
 	/* VRF devices do not care about MTU, but if the MTU is set
 	 * too low then the ipv4 and ipv6 protocols are disabled