diff options
author | David S. Miller <davem@davemloft.net> | 2016-12-08 14:33:17 -0500 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2016-12-08 14:33:17 -0500 |
commit | 107bc0aa95ca572df42da43c30a2079266e992e4 (patch) | |
tree | c3f74ba0a5f6390ddca93f5b8ed51c1400c3a145 /drivers/net | |
parent | ea1e76f78a30c7055afd9e94f785743eeda71c52 (diff) | |
parent | a62da6f14db79bd7ea435ab095e998b31b3dbb22 (diff) | |
download | linux-107bc0aa95ca572df42da43c30a2079266e992e4.tar.bz2 |
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2016-12-08
I didn't miss your "net-next is closed" email, but it did come as a bit
of a surprise, and due to time-zone differences I didn't have a chance
to react to it until now. We would have had a couple of patches in
bluetooth-next that we'd still have wanted to get to 4.10.
Out of these the most critical one is the H7/CT2 patch for Bluetooth
Security Manager Protocol, something that couldn't be published before
the Bluetooth 5.0 specification went public (yesterday). If these really
can't go to net-next we'll likely be sending at least this patch through
bluetooth.git to net.git for rc1 inclusion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/ieee802154/atusb.c | 79 | ||||
-rw-r--r-- | drivers/net/ieee802154/atusb.h | 11 |
2 files changed, 80 insertions, 10 deletions
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c index 322864a1a94b..1253f864737a 100644 --- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -58,6 +58,11 @@ struct atusb { struct urb *tx_urb; struct sk_buff *tx_skb; uint8_t tx_ack_seq; /* current TX ACK sequence number */ + + /* Firmware variable */ + unsigned char fw_ver_maj; /* Firmware major version number */ + unsigned char fw_ver_min; /* Firmware minor version number */ + unsigned char fw_hw_type; /* Firmware hardware type */ }; /* ----- USB commands without data ----------------------------------------- */ @@ -541,6 +546,21 @@ atusb_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be, u8 retries } static int +atusb_set_frame_retries(struct ieee802154_hw *hw, s8 retries) +{ + struct atusb *atusb = hw->priv; + struct device *dev = &atusb->usb_dev->dev; + + if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) { + dev_info(dev, "Automatic frame retransmission is only available from " + "firmware version 0.3. Please update if you want this feature."); + return -EINVAL; + } + + return atusb_write_subreg(atusb, SR_MAX_FRAME_RETRIES, retries); +} + +static int atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on) { struct atusb *atusb = hw->priv; @@ -579,6 +599,7 @@ static const struct ieee802154_ops atusb_ops = { .set_cca_mode = atusb_set_cca_mode, .set_cca_ed_level = atusb_set_cca_ed_level, .set_csma_params = atusb_set_csma_params, + .set_frame_retries = atusb_set_frame_retries, .set_promiscuous_mode = atusb_set_promiscuous_mode, }; @@ -594,14 +615,19 @@ static int atusb_get_and_show_revision(struct atusb *atusb) ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0, buffer, 3, 1000); - if (ret >= 0) + if (ret >= 0) { + atusb->fw_ver_maj = buffer[0]; + atusb->fw_ver_min = buffer[1]; + atusb->fw_hw_type = buffer[2]; + dev_info(&usb_dev->dev, "Firmware: major: %u, minor: %u, hardware type: %u\n", - buffer[0], buffer[1], buffer[2]); - if (buffer[0] == 0 && buffer[1] < 2) { + atusb->fw_ver_maj, atusb->fw_ver_min, atusb->fw_hw_type); + } + if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 2) { dev_info(&usb_dev->dev, - "Firmware version (%u.%u) is predates our first public release.", - buffer[0], buffer[1]); + "Firmware version (%u.%u) predates our first public release.", + atusb->fw_ver_maj, atusb->fw_ver_min); dev_info(&usb_dev->dev, "Please update to version 0.2 or newer"); } @@ -669,6 +695,43 @@ fail: return -ENODEV; } +static int atusb_set_extended_addr(struct atusb *atusb) +{ + struct usb_device *usb_dev = atusb->usb_dev; + unsigned char buffer[IEEE802154_EXTENDED_ADDR_LEN]; + __le64 extended_addr; + u64 addr; + int ret; + + /* Firmware versions before 0.3 do not support the EUI64_READ command. + * Just use a random address and be done */ + if (atusb->fw_ver_maj == 0 && atusb->fw_ver_min < 3) { + ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); + return 0; + } + + /* Firmware is new enough so we fetch the address from EEPROM */ + ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), + ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0, + buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000); + if (ret < 0) + dev_err(&usb_dev->dev, "failed to fetch extended address\n"); + + memcpy(&extended_addr, buffer, IEEE802154_EXTENDED_ADDR_LEN); + /* Check if read address is not empty and the unicast bit is set correctly */ + if (!ieee802154_is_valid_extended_unicast_addr(extended_addr)) { + dev_info(&usb_dev->dev, "no permanent extended address found, random address set\n"); + ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr); + } else { + atusb->hw->phy->perm_extended_addr = extended_addr; + addr = swab64((__force u64)atusb->hw->phy->perm_extended_addr); + dev_info(&usb_dev->dev, "Read permanent extended address %8phC from device\n", + &addr); + } + + return ret; +} + /* ----- Setup ------------------------------------------------------------- */ static int atusb_probe(struct usb_interface *interface, @@ -707,7 +770,8 @@ static int atusb_probe(struct usb_interface *interface, hw->parent = &usb_dev->dev; hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT | - IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS; + IEEE802154_HW_PROMISCUOUS | IEEE802154_HW_CSMA_PARAMS | + IEEE802154_HW_FRAME_RETRIES; hw->phy->flags = WPAN_PHY_FLAG_TXPOWER | WPAN_PHY_FLAG_CCA_ED_LEVEL | WPAN_PHY_FLAG_CCA_MODE; @@ -728,13 +792,14 @@ static int atusb_probe(struct usb_interface *interface, hw->phy->supported.tx_powers = atusb_powers; hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers); hw->phy->transmit_power = hw->phy->supported.tx_powers[0]; - ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); hw->phy->cca_ed_level = hw->phy->supported.cca_ed_levels[7]; atusb_command(atusb, ATUSB_RF_RESET, 0); atusb_get_and_show_chip(atusb); atusb_get_and_show_revision(atusb); atusb_get_and_show_build(atusb); + atusb_set_extended_addr(atusb); + ret = atusb_get_and_clear_error(atusb); if (ret) { dev_err(&atusb->usb_dev->dev, diff --git a/drivers/net/ieee802154/atusb.h b/drivers/net/ieee802154/atusb.h index 0690edcad57b..b22bbaa77590 100644 --- a/drivers/net/ieee802154/atusb.h +++ b/drivers/net/ieee802154/atusb.h @@ -13,8 +13,8 @@ * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h */ -#ifndef _ATUSB_H -#define _ATUSB_H +#ifndef _ATUSB_H +#define _ATUSB_H #define ATUSB_VENDOR_ID 0x20b7 /* Qi Hardware*/ #define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */ @@ -46,9 +46,12 @@ enum atusb_requests { ATUSB_SPI_WRITE2_SYNC, ATUSB_RX_MODE = 0x40, /* HardMAC group */ ATUSB_TX, + ATUSB_EUI64_WRITE = 0x50, /* Parameter in EEPROM grp */ + ATUSB_EUI64_READ, }; -/* Direction bRequest wValue wIndex wLength +/* + * Direction bRequest wValue wIndex wLength * * ->host ATUSB_ID - - 3 * ->host ATUSB_BUILD - - #bytes @@ -76,6 +79,8 @@ enum atusb_requests { * * host-> ATUSB_RX_MODE on - 0 * host-> ATUSB_TX flags ack_seq #bytes + * host-> ATUSB_EUI64_WRITE - - #bytes (8) + * ->host ATUSB_EUI64_READ - - #bytes (8) */ #define ATUSB_REQ_FROM_DEV (USB_TYPE_VENDOR | USB_DIR_IN) |