diff options
| author | Lennert Buytenhek <buytenh@marvell.com> | 2009-03-13 15:48:02 -0700 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2009-03-13 15:48:02 -0700 |
| commit | 5a89392225c6147d10328a64b06b756561e97edf (patch) | |
| tree | 65799891c8419c7777e83f9ba4938e8476e9fc26 /drivers/net | |
| parent | 08ec9af1c0622b0858099a8644a33af02dd3019f (diff) | |
| download | linux-5a89392225c6147d10328a64b06b756561e97edf.tar.bz2 | |
mv643xx_eth: fix unicast address filter corruption on mtu change
When mv643xx_eth_open() is called to up an interface, port_start()
will first re-program the unicast address filter, and then
re-initialise the PORT_CONFIG register, but that will disable unicast
promiscuous mode if it was enabled by the unicast address filter setup.
This isn't a problem on ifconfig up, as ->set_rx_mode() will be called
shortly afterwards which will program the filters again, but it does
trigger when changing the MTU, which calls mv643xx_eth_stop() and then
mv643xx_eth_open() by hand to repopulate the receive rings with skbuffs
of the new size.
Swap the initialisation of the PORT_START register and the call to
the unicast filter setup function to fix this.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/mv643xx_eth.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 13f11f402a99..b0bc3bc18e9c 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2030,11 +2030,6 @@ static void port_start(struct mv643xx_eth_private *mp) } /* - * Add configured unicast address to address filter table. - */ - mv643xx_eth_program_unicast_filter(mp->dev); - - /* * Receive all unmatched unicast, TCP, UDP, BPDU and broadcast * frames to RX queue #0, and include the pseudo-header when * calculating receive checksums. @@ -2047,6 +2042,11 @@ static void port_start(struct mv643xx_eth_private *mp) wrlp(mp, PORT_CONFIG_EXT, 0x00000000); /* + * Add configured unicast addresses to address filter table. + */ + mv643xx_eth_program_unicast_filter(mp->dev); + + /* * Enable the receive queues. */ for (i = 0; i < mp->rxq_count; i++) { |