summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorMarcin Wojtas <mw@semihalf.com>2021-06-25 12:38:53 +0200
committerDavid S. Miller <davem@davemloft.net>2021-06-25 11:46:29 -0700
commitac53c26433b51f1835ce5a935970e427d83e3ec5 (patch)
treecdbef2f33dc8a68365c9bbc569d49d330c743002 /drivers/net
parentf92e1869d74e1acc6551256eb084a1c14a054e19 (diff)
downloadlinux-ac53c26433b51f1835ce5a935970e427d83e3ec5.tar.bz2
net: mdiobus: withdraw fwnode_mdbiobus_register
The newly implemented fwnode_mdbiobus_register turned out to be problematic - in case the fwnode_/of_/acpi_mdio are built as modules, a dependency cycle can be observed during the depmod phase of modules_install, eg.: depmod: ERROR: Cycle detected: fwnode_mdio -> of_mdio -> fwnode_mdio depmod: ERROR: Found 2 modules in dependency cycles! OR: depmod: ERROR: Cycle detected: acpi_mdio -> fwnode_mdio -> acpi_mdio depmod: ERROR: Found 2 modules in dependency cycles! A possible solution could be to rework fwnode_mdiobus_register, so that to merge the contents of acpi_mdiobus_register and of_mdiobus_register. However feasible, such change would be very intrusive and affect huge amount of the of_mdiobus_register users. Since there are currently 2 users of ACPI and MDIO (xgmac_mdio and mvmdio), withdraw the fwnode_mdbiobus_register and roll back to a simple 'if' condition in affected drivers. Fixes: 62a6ef6a996f ("net: mdiobus: Introduce fwnode_mdbiobus_register()") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/ethernet/freescale/Kconfig4
-rw-r--r--drivers/net/ethernet/freescale/xgmac_mdio.c11
-rw-r--r--drivers/net/ethernet/marvell/mvmdio.c10
-rw-r--r--drivers/net/mdio/fwnode_mdio.c22
4 files changed, 20 insertions, 27 deletions
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 92a390576b88..2d1abdd58fab 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -67,7 +67,9 @@ config FSL_PQ_MDIO
config FSL_XGMAC_MDIO
tristate "Freescale XGMAC MDIO"
- depends on FWNODE_MDIO
+ select PHYLIB
+ depends on OF
+ select OF_MDIO
help
This driver supports the MDIO bus on the Fman 10G Ethernet MACs, and
on the FMan mEMAC (which supports both Clauses 22 and 45)
diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index 2d99edc8a647..0b68852379da 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -13,7 +13,7 @@
*/
#include <linux/acpi.h>
-#include <linux/fwnode_mdio.h>
+#include <linux/acpi_mdio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mdio.h>
@@ -246,6 +246,7 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
static int xgmac_mdio_probe(struct platform_device *pdev)
{
+ struct fwnode_handle *fwnode;
struct mdio_fsl_priv *priv;
struct resource *res;
struct mii_bus *bus;
@@ -290,7 +291,13 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
priv->has_a011043 = device_property_read_bool(&pdev->dev,
"fsl,erratum-a011043");
- ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
+ fwnode = pdev->dev.fwnode;
+ if (is_of_node(fwnode))
+ ret = of_mdiobus_register(bus, to_of_node(fwnode));
+ else if (is_acpi_node(fwnode))
+ ret = acpi_mdiobus_register(bus, fwnode);
+ else
+ ret = -EINVAL;
if (ret) {
dev_err(&pdev->dev, "cannot register MDIO bus\n");
goto err_registration;
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 7537ee3f6622..62a97c46fba0 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -18,9 +18,9 @@
*/
#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
#include <linux/clk.h>
#include <linux/delay.h>
-#include <linux/fwnode_mdio.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -371,7 +371,13 @@ static int orion_mdio_probe(struct platform_device *pdev)
goto out_mdio;
}
- ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
+ /* For the platforms not supporting DT/ACPI fall-back
+ * to mdiobus_register via of_mdiobus_register.
+ */
+ if (is_acpi_node(pdev->dev.fwnode))
+ ret = acpi_mdiobus_register(bus, pdev->dev.fwnode);
+ else
+ ret = of_mdiobus_register(bus, pdev->dev.of_node);
if (ret < 0) {
dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
goto out_mdio;
diff --git a/drivers/net/mdio/fwnode_mdio.c b/drivers/net/mdio/fwnode_mdio.c
index ae0bf71a9932..1becb1a731f6 100644
--- a/drivers/net/mdio/fwnode_mdio.c
+++ b/drivers/net/mdio/fwnode_mdio.c
@@ -7,10 +7,8 @@
*/
#include <linux/acpi.h>
-#include <linux/acpi_mdio.h>
#include <linux/fwnode_mdio.h>
#include <linux/of.h>
-#include <linux/of_mdio.h>
#include <linux/phy.h>
MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>");
@@ -144,23 +142,3 @@ int fwnode_mdiobus_register_phy(struct mii_bus *bus,
return 0;
}
EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
-
-/**
- * fwnode_mdiobus_register - bring up all the PHYs on a given MDIO bus and
- * attach them to it.
- * @bus: Target MDIO bus.
- * @fwnode: Pointer to fwnode of the MDIO controller.
- *
- * Return values are determined accordingly to acpi_/of_ mdiobus_register()
- * operation.
- */
-int fwnode_mdiobus_register(struct mii_bus *bus, struct fwnode_handle *fwnode)
-{
- if (is_acpi_node(fwnode))
- return acpi_mdiobus_register(bus, fwnode);
- else if (is_of_node(fwnode))
- return of_mdiobus_register(bus, to_of_node(fwnode));
- else
- return -EINVAL;
-}
-EXPORT_SYMBOL(fwnode_mdiobus_register);