summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorJesse Brandeburg <jesse.brandeburg@intel.com>2008-07-08 15:53:04 -0700
committerJeff Garzik <jgarzik@redhat.com>2008-07-11 01:20:30 -0400
commit6d37ab282e246f3cb5b4b975ecc5e8303ba5da82 (patch)
treed3ba52c9c065a0f69e54130b4dea1ba6469b842a /drivers/net
parent2c21fc6e3a1150a1fa8c09b0f8ae0b796fb5039f (diff)
downloadlinux-6d37ab282e246f3cb5b4b975ecc5e8303ba5da82.tar.bz2
ixgb: make NAPI the only option and the default
network maintainers suggest NAPI only drivers are the only way to go. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/Kconfig14
-rw-r--r--drivers/net/ixgb/ixgb_main.c47
2 files changed, 1 insertions, 60 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9b98714889bf..21414177ee1e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2430,20 +2430,6 @@ config IXGB
To compile this driver as a module, choose M here. The module
will be called ixgb.
-config IXGB_NAPI
- bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
- depends on IXGB && EXPERIMENTAL
- help
- NAPI is a new driver API designed to reduce CPU and interrupt load
- when the driver is receiving lots of packets from the card. It is
- still somewhat experimental and thus not yet enabled by default.
-
- If your estimated Rx load is 10kpps or more, or if the card will be
- deployed on potentially unfriendly networks (e.g. in a firewall),
- then say Y here.
-
- If in doubt, say N.
-
config S2IO
tristate "S2IO 10Gbe XFrame NIC"
depends on PCI
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 3e857c022b66..526413482be2 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -31,12 +31,8 @@
char ixgb_driver_name[] = "ixgb";
static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
-#ifndef CONFIG_IXGB_NAPI
-#define DRIVERNAPI
-#else
#define DRIVERNAPI "-NAPI"
-#endif
-#define DRV_VERSION "1.0.126-k4"DRIVERNAPI
+#define DRV_VERSION "1.0.126" DRIVERNAPI
const char ixgb_driver_version[] = DRV_VERSION;
static const char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
@@ -92,12 +88,8 @@ static int ixgb_set_mac(struct net_device *netdev, void *p);
static irqreturn_t ixgb_intr(int irq, void *data);
static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
-#ifdef CONFIG_IXGB_NAPI
static int ixgb_clean(struct napi_struct *, int);
static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int);
-#else
-static bool ixgb_clean_rx_irq(struct ixgb_adapter *);
-#endif
static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int);
static void ixgb_tx_timeout(struct net_device *dev);
@@ -271,9 +263,7 @@ ixgb_up(struct ixgb_adapter *adapter)
clear_bit(__IXGB_DOWN, &adapter->flags);
-#ifdef CONFIG_IXGB_NAPI
napi_enable(&adapter->napi);
-#endif
ixgb_irq_enable(adapter);
mod_timer(&adapter->watchdog_timer, jiffies);
@@ -289,9 +279,7 @@ ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
/* prevent the interrupt handler from restarting watchdog */
set_bit(__IXGB_DOWN, &adapter->flags);
-#ifdef CONFIG_IXGB_NAPI
napi_disable(&adapter->napi);
-#endif
/* waiting for NAPI to complete can re-enable interrupts */
ixgb_irq_disable(adapter);
free_irq(adapter->pdev->irq, netdev);
@@ -419,9 +407,7 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
ixgb_set_ethtool_ops(netdev);
netdev->tx_timeout = &ixgb_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
-#ifdef CONFIG_IXGB_NAPI
netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64);
-#endif
netdev->vlan_rx_register = ixgb_vlan_rx_register;
netdev->vlan_rx_add_vid = ixgb_vlan_rx_add_vid;
netdev->vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid;
@@ -1709,9 +1695,6 @@ ixgb_intr(int irq, void *data)
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
u32 icr = IXGB_READ_REG(hw, ICR);
-#ifndef CONFIG_IXGB_NAPI
- unsigned int i;
-#endif
if (unlikely(!icr))
return IRQ_NONE; /* Not our interrupt */
@@ -1720,7 +1703,6 @@ ixgb_intr(int irq, void *data)
if (!test_bit(__IXGB_DOWN, &adapter->flags))
mod_timer(&adapter->watchdog_timer, jiffies);
-#ifdef CONFIG_IXGB_NAPI
if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
/* Disable interrupts and register for poll. The flush
@@ -1730,20 +1712,9 @@ ixgb_intr(int irq, void *data)
IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
__netif_rx_schedule(netdev, &adapter->napi);
}
-#else
- /* yes, that is actually a & and it is meant to make sure that
- * every pass through this for loop checks both receive and
- * transmit queues for completed descriptors, intended to
- * avoid starvation issues and assist tx/rx fairness. */
- for (i = 0; i < IXGB_MAX_INTR; i++)
- if (!ixgb_clean_rx_irq(adapter) &
- !ixgb_clean_tx_irq(adapter))
- break;
-#endif
return IRQ_HANDLED;
}
-#ifdef CONFIG_IXGB_NAPI
/**
* ixgb_clean - NAPI Rx polling callback
* @adapter: board private structure
@@ -1768,7 +1739,6 @@ ixgb_clean(struct napi_struct *napi, int budget)
return work_done;
}
-#endif
/**
* ixgb_clean_tx_irq - Reclaim resources after transmit completes
@@ -1901,11 +1871,7 @@ ixgb_rx_checksum(struct ixgb_adapter *adapter,
**/
static bool
-#ifdef CONFIG_IXGB_NAPI
ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
-#else
-ixgb_clean_rx_irq(struct ixgb_adapter *adapter)
-#endif
{
struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
struct net_device *netdev = adapter->netdev;
@@ -1925,12 +1891,10 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter)
struct sk_buff *skb;
u8 status;
-#ifdef CONFIG_IXGB_NAPI
if (*work_done >= work_to_do)
break;
(*work_done)++;
-#endif
status = rx_desc->status;
skb = buffer_info->skb;
buffer_info->skb = NULL;
@@ -2005,21 +1969,12 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter)
ixgb_rx_checksum(adapter, rx_desc, skb);
skb->protocol = eth_type_trans(skb, netdev);
-#ifdef CONFIG_IXGB_NAPI
if (adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) {
vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
le16_to_cpu(rx_desc->special));
} else {
netif_receive_skb(skb);
}
-#else /* CONFIG_IXGB_NAPI */
- if (adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) {
- vlan_hwaccel_rx(skb, adapter->vlgrp,
- le16_to_cpu(rx_desc->special));
- } else {
- netif_rx(skb);
- }
-#endif /* CONFIG_IXGB_NAPI */
netdev->last_rx = jiffies;
rxdesc_done: