summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorNeil Horman <nhorman@tuxdriver.com>2017-05-12 12:00:01 -0400
committerDavid S. Miller <davem@davemloft.net>2017-05-12 12:23:52 -0400
commit1c4d5f51a812a82de97beee24f48ed05c65ebda5 (patch)
tree168b055b2c850758eaaf6ab8862f87577bc86d98 /drivers/net
parent42e6cae1b35b186650f5abc7b24c20ab6986c5a0 (diff)
downloadlinux-1c4d5f51a812a82de97beee24f48ed05c65ebda5.tar.bz2
vmxnet3: ensure that adapter is in proper state during force_close
There are several paths in vmxnet3, where settings changes cause the adapter to be brought down and back up (vmxnet3_set_ringparam among them). Should part of the reset operation fail, these paths call vmxnet3_force_close, which enables all napi instances prior to calling dev_close (with the expectation that vmxnet3_close will then properly disable them again). However, vmxnet3_force_close neglects to clear VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and leaves all the napi instances in a enabled state while the device itself is closed. If a device in this state is activated again, napi_enable will be called on already enabled napi_instances, leading to a BUG halt. The fix is to simply enausre that the QUIESCED bit is cleared in vmxnet3_force_close to allow quesence to be completed properly on close. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/vmxnet3/vmxnet3_drv.c5
1 files changed, 5 insertions, 0 deletions
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 25bc764ae7dc..d1c7029ded7c 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2962,6 +2962,11 @@ vmxnet3_force_close(struct vmxnet3_adapter *adapter)
/* we need to enable NAPI, otherwise dev_close will deadlock */
for (i = 0; i < adapter->num_rx_queues; i++)
napi_enable(&adapter->rx_queue[i].napi);
+ /*
+ * Need to clear the quiesce bit to ensure that vmxnet3_close
+ * can quiesce the device properly
+ */
+ clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
dev_close(adapter->netdev);
}