diff options
author | Mike McCormack <mikem@ring3k.org> | 2010-02-12 06:58:03 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-02-12 16:21:02 -0800 |
commit | 200ac492b3c366346fcabd11897fadbd1a7a6599 (patch) | |
tree | 1dbf91be83168ca6ec6d3612544d58ca3f96fac6 /drivers/net | |
parent | 39ef110ba859f44efeb9a88d0e85316cd1bbecda (diff) | |
download | linux-200ac492b3c366346fcabd11897fadbd1a7a6599.tar.bz2 |
sky2: Allocate initial skbs in sky2_alloc_buffers
Allocate everything in one place so there's a single point
of failure in sky2_up, and sky2_rx_start can no longer fail.
Don't leave the hardware in a partially initialized state in the
case rx ring allocation fails.
As with the old code, the rx ring still needs to be fully
allocated for sky2_up to succeed.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/sky2.c | 66 |
1 files changed, 36 insertions, 30 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c5de65c6f6e1..493a82018cbd 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1363,8 +1363,32 @@ static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq) sky2_put_idx(sky2->hw, rxq, sky2->rx_put); } +static int sky2_alloc_rx_skbs(struct sky2_port *sky2) +{ + struct sky2_hw *hw = sky2->hw; + unsigned i; + + sky2->rx_data_size = sky2_get_rx_data_size(sky2); + + /* Fill Rx ring */ + for (i = 0; i < sky2->rx_pending; i++) { + struct rx_ring_info *re = sky2->rx_ring + i; + + re->skb = sky2_rx_alloc(sky2); + if (!re->skb) + return -ENOMEM; + + if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) { + dev_kfree_skb(re->skb); + re->skb = NULL; + return -ENOMEM; + } + } + return 0; +} + /* - * Allocate and setup receiver buffer pool. + * Setup receiver buffer pool. * Normal case this ends up creating one list element for skb * in the receive ring. Worst case if using large MTU and each * allocation falls on a different 64 bit region, that results @@ -1372,7 +1396,7 @@ static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq) * One element is used for checksum enable/disable, and one * extra to avoid wrap. */ -static int sky2_rx_start(struct sky2_port *sky2) +static void sky2_rx_start(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; struct rx_ring_info *re; @@ -1398,22 +1422,9 @@ static int sky2_rx_start(struct sky2_port *sky2) if (!(hw->flags & SKY2_HW_NEW_LE)) rx_set_checksum(sky2); - sky2->rx_data_size = sky2_get_rx_data_size(sky2); - - /* Fill Rx ring */ + /* submit Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { re = sky2->rx_ring + i; - - re->skb = sky2_rx_alloc(sky2); - if (!re->skb) - goto nomem; - - if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) { - dev_kfree_skb(re->skb); - re->skb = NULL; - goto nomem; - } - sky2_rx_submit(sky2, re); } @@ -1455,13 +1466,6 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST), TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN); } - - - - return 0; -nomem: - sky2_rx_clean(sky2); - return -ENOMEM; } static int sky2_alloc_buffers(struct sky2_port *sky2) @@ -1492,7 +1496,7 @@ static int sky2_alloc_buffers(struct sky2_port *sky2) if (!sky2->rx_ring) goto nomem; - return 0; + return sky2_alloc_rx_skbs(sky2); nomem: return -ENOMEM; } @@ -1501,6 +1505,8 @@ static void sky2_free_buffers(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; + sky2_rx_clean(sky2); + if (sky2->rx_le) { pci_free_consistent(hw->pdev, RX_LE_BYTES, sky2->rx_le, sky2->rx_le_map); @@ -1590,9 +1596,7 @@ static int sky2_up(struct net_device *dev) sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL); #endif - err = sky2_rx_start(sky2); - if (err) - goto err_out; + sky2_rx_start(sky2); /* Enable interrupts from phy/mac for port */ imask = sky2_read32(hw, B0_IMSK); @@ -1960,8 +1964,6 @@ static int sky2_down(struct net_device *dev) /* Free any pending frames stuck in HW queue */ sky2_tx_complete(sky2, sky2->tx_prod); - sky2_rx_clean(sky2); - sky2_free_buffers(sky2); return 0; @@ -2257,7 +2259,11 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD); - err = sky2_rx_start(sky2); + err = sky2_alloc_rx_skbs(sky2); + if (!err) + sky2_rx_start(sky2); + else + sky2_rx_clean(sky2); sky2_write32(hw, B0_IMSK, imask); sky2_read32(hw, B0_Y2_SP_LISR); |