diff options
| author | Giedrius Statkevičius <giedrius.statkevicius@gmail.com> | 2016-09-01 20:47:02 +0300 |
|---|---|---|
| committer | Kalle Valo <kvalo@qca.qualcomm.com> | 2016-09-07 16:21:04 +0300 |
| commit | e34f2ff40e0339f6a379e1ecf49e8f2759056453 (patch) | |
| tree | 11fe0754276fb4b5c9c7e9b4708488137f98ff8e /drivers/net | |
| parent | db7b542e4a789156a4fb61278f2074795fe2eb9c (diff) | |
| download | linux-e34f2ff40e0339f6a379e1ecf49e8f2759056453.tar.bz2 | |
ath9k: bring back direction setting in ath9k_{start_stop}
A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup
led_pin initial") that broken the WLAN status led on my laptop with
AR9287 after suspending and resuming.
Steps to reproduce:
* Suspend (laptop)
* Resume (laptop)
* Observe that the WLAN led no longer turns ON/OFF depending on the
status and is always red
Even though for my case it only needs to be set to OUT in ath9k_start
but for consistency bring back the IN direction setting as well.
Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial")
Cc: Miaoqing Pan <miaoqing@codeaurora.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
[kvalo@qca.qualcomm.com: improve commit log]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/main.c | 9 |
1 files changed, 7 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6ca4337a98c4..7cb65c303f8d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw) if (!ath_complete_reset(sc, false)) ah->reset_power_on = false; - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 1 : 0); + ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + } /* * Reset key cache to sane defaults (all entries cleared) instead of @@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw) spin_lock_bh(&sc->sc_pcu_lock); - if (ah->led_pin >= 0) + if (ah->led_pin >= 0) { ath9k_hw_set_gpio(ah, ah->led_pin, (ah->config.led_active_high) ? 0 : 1); + ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL); + } ath_prepare_reset(sc); |