wl12xx: move partition table definition to io.c

Up till now we only needed to access the partition table in boot.c.
But to add support for reading the MAC address from the FUSE in
testmode, we will have to change the partition in testmode.c.

Thus, we move the partition table to io.c and export it via io.h.  It
makes more sense to have it in the io part anyway.

Signed-off-by: Luciano Coelho <coelho@ti.com>

1 files changed, 7 insertions, 66 deletions

diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 8f9cf5a816ea..84d295126edf 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -33,65 +33,6 @@
 #include "event.h"
 #include "rx.h"
 
-static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
-	[PART_DOWN] = {
-		.mem = {
-			.start = 0x00000000,
-			.size  = 0x000177c0
-		},
-		.reg = {
-			.start = REGISTERS_BASE,
-			.size  = 0x00008800
-		},
-		.mem2 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		},
-		.mem3 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		},
-	},
-
-	[PART_WORK] = {
-		.mem = {
-			.start = 0x00040000,
-			.size  = 0x00014fc0
-		},
-		.reg = {
-			.start = REGISTERS_BASE,
-			.size  = 0x0000a000
-		},
-		.mem2 = {
-			.start = 0x003004f8,
-			.size  = 0x00000004
-		},
-		.mem3 = {
-			.start = 0x00040404,
-			.size  = 0x00000000
-		},
-	},
-
-	[PART_DRPW] = {
-		.mem = {
-			.start = 0x00040000,
-			.size  = 0x00014fc0
-		},
-		.reg = {
-			.start = DRPW_BASE,
-			.size  = 0x00006000
-		},
-		.mem2 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		},
-		.mem3 = {
-			.start = 0x00000000,
-			.size  = 0x00000000
-		}
-	}
-};
-
 static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
 {
 	u32 cpu_ctrl;
@@ -181,13 +122,13 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 		return -ENOMEM;
 	}
 
-	memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
+	memcpy(&partition, &wl12xx_part_table[PART_DOWN], sizeof(partition));
 	partition.mem.start = dest;
 	wl1271_set_partition(wl, &partition);
 
 	/* 10.1 set partition limit and chunk num */
 	chunk_num = 0;
-	partition_limit = part_table[PART_DOWN].mem.size;
+	partition_limit = wl12xx_part_table[PART_DOWN].mem.size;
 
 	while (chunk_num < fw_data_len / CHUNK_SIZE) {
 		/* 10.2 update partition, if needed */
@@ -195,7 +136,7 @@ static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 		if (addr > partition_limit) {
 			addr = dest + chunk_num * CHUNK_SIZE;
 			partition_limit = chunk_num * CHUNK_SIZE +
-				part_table[PART_DOWN].mem.size;
+				wl12xx_part_table[PART_DOWN].mem.size;
 			partition.mem.start = addr;
 			wl1271_set_partition(wl, &partition);
 		}
@@ -383,7 +324,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
 
 	/* Now we must set the partition correctly */
-	wl1271_set_partition(wl, &part_table[PART_WORK]);
+	wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
 
 	/* Copy the NVS tables to a new block to ensure alignment */
 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
@@ -492,7 +433,7 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
 
 	/* set the working partition to its "running" mode offset */
-	wl1271_set_partition(wl, &part_table[PART_WORK]);
+	wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
 
 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
 		     wl->cmd_box_addr, wl->event_box_addr);
@@ -769,7 +710,7 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);
 
-	wl1271_set_partition(wl, &part_table[PART_DRPW]);
+	wl1271_set_partition(wl, &wl12xx_part_table[PART_DRPW]);
 
 	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
 	   to be used by DRPw FW. The RTRIM value will be added by the FW
@@ -788,7 +729,7 @@ int wl1271_load_firmware(struct wl1271 *wl)
 
 	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
 
-	wl1271_set_partition(wl, &part_table[PART_WORK]);
+	wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
 
 	/* Disable interrupts */
 	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);