iwlagn: move scan code to scan file

Since the driver split there's no longer a need
to have the scan code scattered across multiple
files, so move it all back to iwl-scan.c

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 433 insertions, 6 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index fc5af3475392..8ac6b05c6c78 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -299,9 +299,8 @@ void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
 					iwl_rx_scan_complete_notif;
 }
 
-inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
-				     enum ieee80211_band band,
-				     u8 n_probes)
+static u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
+				     enum ieee80211_band band, u8 n_probes)
 {
 	if (band == IEEE80211_BAND_5GHZ)
 		return IWL_ACTIVE_DWELL_TIME_52 +
@@ -311,9 +310,8 @@ inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
 			IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
 }
 
-u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
-			       enum ieee80211_band band,
-			       struct ieee80211_vif *vif)
+static u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
+				      enum ieee80211_band band)
 {
 	struct iwl_rxon_context *ctx;
 	u16 passive = (band == IEEE80211_BAND_2GHZ) ?
@@ -342,6 +340,435 @@ u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
 	return passive;
 }
 
+static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
+					   struct ieee80211_vif *vif,
+					   enum ieee80211_band band,
+					   struct iwl_scan_channel *scan_ch)
+{
+	const struct ieee80211_supported_band *sband;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added = 0;
+	u16 channel = 0;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband) {
+		IWL_ERR(priv, "invalid band\n");
+		return added;
+	}
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	channel = iwl_get_single_channel_number(priv, band);
+	if (channel) {
+		scan_ch->channel = cpu_to_le16(channel);
+		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+		added++;
+	} else
+		IWL_ERR(priv, "no valid channel found\n");
+	return added;
+}
+
+static int iwl_get_channels_for_scan(struct iwl_priv *priv,
+				     struct ieee80211_vif *vif,
+				     enum ieee80211_band band,
+				     u8 is_active, u8 n_probes,
+				     struct iwl_scan_channel *scan_ch)
+{
+	struct ieee80211_channel *chan;
+	const struct ieee80211_supported_band *sband;
+	const struct iwl_channel_info *ch_info;
+	u16 passive_dwell = 0;
+	u16 active_dwell = 0;
+	int added, i;
+	u16 channel;
+
+	sband = iwl_get_hw_mode(priv, band);
+	if (!sband)
+		return 0;
+
+	active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
+	passive_dwell = iwl_get_passive_dwell_time(priv, band);
+
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
+	for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
+		chan = priv->scan_request->channels[i];
+
+		if (chan->band != band)
+			continue;
+
+		channel = chan->hw_value;
+		scan_ch->channel = cpu_to_le16(channel);
+
+		ch_info = iwl_get_channel_info(priv, band, channel);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_SCAN(priv,
+				       "Channel %d is INVALID for this band.\n",
+				       channel);
+			continue;
+		}
+
+		if (!is_active || is_channel_passive(ch_info) ||
+		    (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
+			scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		else
+			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+		if (n_probes)
+			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+
+		scan_ch->active_dwell = cpu_to_le16(active_dwell);
+		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+
+		/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+		 * power level:
+		 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+		 */
+		if (band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+		IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
+			       channel, le32_to_cpu(scan_ch->type),
+			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+				"ACTIVE" : "PASSIVE",
+			       (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
+			       active_dwell : passive_dwell);
+
+		scan_ch++;
+		added++;
+	}
+
+	IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
+	return added;
+}
+
+static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_SCAN_CMD,
+		.len = { sizeof(struct iwl_scan_cmd), },
+		.flags = CMD_SYNC,
+	};
+	struct iwl_scan_cmd *scan;
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	u32 rate_flags = 0;
+	u16 cmd_len;
+	u16 rx_chain = 0;
+	enum ieee80211_band band;
+	u8 n_probes = 0;
+	u8 rx_ant = hw_params(priv).valid_rx_ant;
+	u8 rate;
+	bool is_active = false;
+	int  chan_mod;
+	u8 active_chains;
+	u8 scan_tx_antennas = hw_params(priv).valid_tx_ant;
+	int ret;
+
+	lockdep_assert_held(&priv->shrd->mutex);
+
+	if (vif)
+		ctx = iwl_rxon_ctx_from_vif(vif);
+
+	if (!priv->scan_cmd) {
+		priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
+					 IWL_MAX_SCAN_SIZE, GFP_KERNEL);
+		if (!priv->scan_cmd) {
+			IWL_DEBUG_SCAN(priv,
+				       "fail to allocate memory for scan\n");
+			return -ENOMEM;
+		}
+	}
+	scan = priv->scan_cmd;
+	memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
+
+	scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
+	scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
+
+	if (priv->scan_type != IWL_SCAN_ROC &&
+	    iwl_is_any_associated(priv)) {
+		u16 interval = 0;
+		u32 extra;
+		u32 suspend_time = 100;
+		u32 scan_suspend_time = 100;
+
+		IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
+		switch (priv->scan_type) {
+		case IWL_SCAN_ROC:
+			WARN_ON(1);
+			break;
+		case IWL_SCAN_RADIO_RESET:
+			interval = 0;
+			break;
+		case IWL_SCAN_NORMAL:
+			interval = vif->bss_conf.beacon_int;
+			break;
+		}
+
+		scan->suspend_time = 0;
+		scan->max_out_time = cpu_to_le32(200 * 1024);
+		if (!interval)
+			interval = suspend_time;
+
+		extra = (suspend_time / interval) << 22;
+		scan_suspend_time = (extra |
+		    ((suspend_time % interval) * 1024));
+		scan->suspend_time = cpu_to_le32(scan_suspend_time);
+		IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
+			       scan_suspend_time, interval);
+	} else if (priv->scan_type == IWL_SCAN_ROC) {
+		scan->suspend_time = 0;
+		scan->max_out_time = 0;
+		scan->quiet_time = 0;
+		scan->quiet_plcp_th = 0;
+	}
+
+	switch (priv->scan_type) {
+	case IWL_SCAN_RADIO_RESET:
+		IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
+		break;
+	case IWL_SCAN_NORMAL:
+		if (priv->scan_request->n_ssids) {
+			int i, p = 0;
+			IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+			for (i = 0; i < priv->scan_request->n_ssids; i++) {
+				/* always does wildcard anyway */
+				if (!priv->scan_request->ssids[i].ssid_len)
+					continue;
+				scan->direct_scan[p].id = WLAN_EID_SSID;
+				scan->direct_scan[p].len =
+					priv->scan_request->ssids[i].ssid_len;
+				memcpy(scan->direct_scan[p].ssid,
+				       priv->scan_request->ssids[i].ssid,
+				       priv->scan_request->ssids[i].ssid_len);
+				n_probes++;
+				p++;
+			}
+			is_active = true;
+		} else
+			IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
+		break;
+	case IWL_SCAN_ROC:
+		IWL_DEBUG_SCAN(priv, "Start ROC scan.\n");
+		break;
+	}
+
+	scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+	scan->tx_cmd.sta_id = ctx->bcast_sta_id;
+	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+	switch (priv->scan_band) {
+	case IEEE80211_BAND_2GHZ:
+		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+		chan_mod = le32_to_cpu(
+			priv->contexts[IWL_RXON_CTX_BSS].active.flags &
+						RXON_FLG_CHANNEL_MODE_MSK)
+				       >> RXON_FLG_CHANNEL_MODE_POS;
+		if (chan_mod == CHANNEL_MODE_PURE_40) {
+			rate = IWL_RATE_6M_PLCP;
+		} else {
+			rate = IWL_RATE_1M_PLCP;
+			rate_flags = RATE_MCS_CCK_MSK;
+		}
+		/*
+		 * Internal scans are passive, so we can indiscriminately set
+		 * the BT ignore flag on 2.4 GHz since it applies to TX only.
+		 */
+		if (priv->cfg->bt_params &&
+		    priv->cfg->bt_params->advanced_bt_coexist)
+			scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
+		break;
+	case IEEE80211_BAND_5GHZ:
+		rate = IWL_RATE_6M_PLCP;
+		break;
+	default:
+		IWL_WARN(priv, "Invalid scan band\n");
+		return -EIO;
+	}
+
+	/*
+	 * If active scanning is requested but a certain channel is
+	 * marked passive, we can do active scanning if we detect
+	 * transmissions.
+	 *
+	 * There is an issue with some firmware versions that triggers
+	 * a sysassert on a "good CRC threshold" of zero (== disabled),
+	 * on a radar channel even though this means that we should NOT
+	 * send probes.
+	 *
+	 * The "good CRC threshold" is the number of frames that we
+	 * need to receive during our dwell time on a channel before
+	 * sending out probes -- setting this to a huge value will
+	 * mean we never reach it, but at the same time work around
+	 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+	 * here instead of IWL_GOOD_CRC_TH_DISABLED.
+	 *
+	 * This was fixed in later versions along with some other
+	 * scan changes, and the threshold behaves as a flag in those
+	 * versions.
+	 */
+	if (priv->new_scan_threshold_behaviour)
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_DISABLED;
+	else
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_NEVER;
+
+	band = priv->scan_band;
+
+	if (priv->cfg->scan_rx_antennas[band])
+		rx_ant = priv->cfg->scan_rx_antennas[band];
+
+	if (band == IEEE80211_BAND_2GHZ &&
+	    priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* transmit 2.4 GHz probes only on first antenna */
+		scan_tx_antennas = first_antenna(scan_tx_antennas);
+	}
+
+	priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv,
+						    priv->scan_tx_ant[band],
+						    scan_tx_antennas);
+	rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
+	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
+
+	/* In power save mode use one chain, otherwise use all chains */
+	if (test_bit(STATUS_POWER_PMI, &priv->shrd->status)) {
+		/* rx_ant has been set to all valid chains previously */
+		active_chains = rx_ant &
+				((u8)(priv->chain_noise_data.active_chains));
+		if (!active_chains)
+			active_chains = rx_ant;
+
+		IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+				priv->chain_noise_data.active_chains);
+
+		rx_ant = first_antenna(active_chains);
+	}
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist &&
+	    priv->bt_full_concurrent) {
+		/* operated as 1x1 in full concurrency mode */
+		rx_ant = first_antenna(rx_ant);
+	}
+
+	/* MIMO is not used here, but value is required */
+	rx_chain |=
+		hw_params(priv).valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+	scan->rx_chain = cpu_to_le16(rx_chain);
+	switch (priv->scan_type) {
+	case IWL_SCAN_NORMAL:
+		cmd_len = iwl_fill_probe_req(priv,
+					(struct ieee80211_mgmt *)scan->data,
+					vif->addr,
+					priv->scan_request->ie,
+					priv->scan_request->ie_len,
+					IWL_MAX_SCAN_SIZE - sizeof(*scan));
+		break;
+	case IWL_SCAN_RADIO_RESET:
+	case IWL_SCAN_ROC:
+		/* use bcast addr, will not be transmitted but must be valid */
+		cmd_len = iwl_fill_probe_req(priv,
+					(struct ieee80211_mgmt *)scan->data,
+					iwl_bcast_addr, NULL, 0,
+					IWL_MAX_SCAN_SIZE - sizeof(*scan));
+		break;
+	default:
+		BUG();
+	}
+	scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+	scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
+			       RXON_FILTER_BCON_AWARE_MSK);
+
+	switch (priv->scan_type) {
+	case IWL_SCAN_RADIO_RESET:
+		scan->channel_count =
+			iwl_get_single_channel_for_scan(priv, vif, band,
+				(void *)&scan->data[cmd_len]);
+		break;
+	case IWL_SCAN_NORMAL:
+		scan->channel_count =
+			iwl_get_channels_for_scan(priv, vif, band,
+				is_active, n_probes,
+				(void *)&scan->data[cmd_len]);
+		break;
+	case IWL_SCAN_ROC: {
+		struct iwl_scan_channel *scan_ch;
+
+		scan->channel_count = 1;
+
+		scan_ch = (void *)&scan->data[cmd_len];
+		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+		scan_ch->channel =
+			cpu_to_le16(priv->hw_roc_channel->hw_value);
+		scan_ch->active_dwell =
+		scan_ch->passive_dwell =
+			cpu_to_le16(priv->hw_roc_duration);
+
+		/* Set txpower levels to defaults */
+		scan_ch->dsp_atten = 110;
+
+		/* NOTE: if we were doing 6Mb OFDM for scans we'd use
+		 * power level:
+		 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+		 */
+		if (priv->hw_roc_channel->band == IEEE80211_BAND_5GHZ)
+			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+		else
+			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+		}
+		break;
+	}
+
+	if (scan->channel_count == 0) {
+		IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
+		return -EIO;
+	}
+
+	cmd.len[0] += le16_to_cpu(scan->tx_cmd.len) +
+	    scan->channel_count * sizeof(struct iwl_scan_channel);
+	cmd.data[0] = scan;
+	cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
+	scan->len = cpu_to_le16(cmd.len[0]);
+
+	/* set scan bit here for PAN params */
+	set_bit(STATUS_SCAN_HW, &priv->shrd->status);
+
+	ret = iwlagn_set_pan_params(priv);
+	if (ret)
+		return ret;
+
+	ret = iwl_trans_send_cmd(trans(priv), &cmd);
+	if (ret) {
+		clear_bit(STATUS_SCAN_HW, &priv->shrd->status);
+		iwlagn_set_pan_params(priv);
+	}
+
+	return ret;
+}
+
 void iwl_init_scan_params(struct iwl_priv *priv)
 {
 	u8 ant_idx = fls(hw_params(priv).valid_tx_ant) - 1;