iwlwifi: make device configuration bus agnostic

Newer devices can work on different buses. This means that
their configuration can be shared between different buses.
Hence the configuration structures should exported to all
the buses and not only to PCIE. Change this.

Note that this requires all the fields to be the same
amongst the buses. If differences will appear, we can always
define a part that is bus dependent. Today, this is not
needed.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 402 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
new file mode 100644
index 000000000000..b5ab8d1bcac0
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -0,0 +1,402 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2008 - 2013 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include "iwl-config.h"
+#include "iwl-agn-hw.h"
+#include "dvm/commands.h" /* needed for BT for now */
+
+/* Highest firmware API version supported */
+#define IWL6000_UCODE_API_MAX 6
+#define IWL6050_UCODE_API_MAX 5
+#define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
+
+/* Oldest version we won't warn about */
+#define IWL6000_UCODE_API_OK 4
+#define IWL6000G2_UCODE_API_OK 5
+#define IWL6050_UCODE_API_OK 5
+#define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
+
+/* Lowest firmware API version supported */
+#define IWL6000_UCODE_API_MIN 4
+#define IWL6050_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
+
+/* EEPROM versions */
+#define EEPROM_6000_TX_POWER_VERSION	(4)
+#define EEPROM_6000_EEPROM_VERSION	(0x423)
+#define EEPROM_6050_TX_POWER_VERSION	(4)
+#define EEPROM_6050_EEPROM_VERSION	(0x532)
+#define EEPROM_6150_TX_POWER_VERSION	(6)
+#define EEPROM_6150_EEPROM_VERSION	(0x553)
+#define EEPROM_6005_TX_POWER_VERSION	(6)
+#define EEPROM_6005_EEPROM_VERSION	(0x709)
+#define EEPROM_6030_TX_POWER_VERSION	(6)
+#define EEPROM_6030_EEPROM_VERSION	(0x709)
+#define EEPROM_6035_TX_POWER_VERSION	(6)
+#define EEPROM_6035_EEPROM_VERSION	(0x753)
+
+#define IWL6000_FW_PRE "iwlwifi-6000-"
+#define IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6050_FW_PRE "iwlwifi-6050-"
+#define IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6005_FW_PRE "iwlwifi-6000g2a-"
+#define IWL6005_MODULE_FIRMWARE(api) IWL6005_FW_PRE __stringify(api) ".ucode"
+
+#define IWL6030_FW_PRE "iwlwifi-6000g2b-"
+#define IWL6030_MODULE_FIRMWARE(api) IWL6030_FW_PRE __stringify(api) ".ucode"
+
+static const struct iwl_base_params iwl6000_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.led_compensation = 51,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+};
+
+static const struct iwl_base_params iwl6050_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+	.shadow_ram_support = true,
+	.led_compensation = 51,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1500,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
+	.max_event_log_size = 1024,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+};
+
+static const struct iwl_base_params iwl6000_g2_base_params = {
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.num_of_queues = IWLAGN_NUM_QUEUES,
+	.pll_cfg_val = 0,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.led_compensation = 57,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
+	.chain_noise_scale = 1000,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
+	.max_event_log_size = 512,
+	.shadow_reg_enable = false, /* TODO: fix bugs using this feature */
+};
+
+static const struct iwl_ht_params iwl6000_ht_params = {
+	.ht_greenfield_support = true,
+	.use_rts_for_aggregation = true, /* use rts/cts protection */
+	.ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ),
+};
+
+static const struct iwl_bt_params iwl6000_bt_params = {
+	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
+	.advanced_bt_coexist = true,
+	.agg_time_limit = BT_AGG_THRESHOLD_DEF,
+	.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
+	.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+	.bt_sco_disable = true,
+};
+
+static const struct iwl_eeprom_params iwl6000_eeprom_params = {
+	.regulatory_bands = {
+		EEPROM_REG_BAND_1_CHANNELS,
+		EEPROM_REG_BAND_2_CHANNELS,
+		EEPROM_REG_BAND_3_CHANNELS,
+		EEPROM_REG_BAND_4_CHANNELS,
+		EEPROM_REG_BAND_5_CHANNELS,
+		EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
+		EEPROM_REG_BAND_52_HT40_CHANNELS
+	},
+	.enhanced_txpower = true,
+};
+
+#define IWL_DEVICE_6005						\
+	.fw_name_pre = IWL6005_FW_PRE,				\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_ok = IWL6000G2_UCODE_API_OK,			\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.device_family = IWL_DEVICE_FAMILY_6005,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6005_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6005_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE
+
+const struct iwl_cfg iwl6005_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
+	IWL_DEVICE_6005,
+};
+
+const struct iwl_cfg iwl6005_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
+	IWL_DEVICE_6005,
+};
+
+const struct iwl_cfg iwl6005_2agn_sff_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205S AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_d_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205D AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_mow1_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6206 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6005_2agn_mow2_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6207 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
+};
+
+#define IWL_DEVICE_6030						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_ok = IWL6000G2B_UCODE_API_OK,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true						\
+
+const struct iwl_cfg iwl6030_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6030_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
+	IWL_DEVICE_6030,
+};
+
+const struct iwl_cfg iwl6030_2bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6030_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
+	IWL_DEVICE_6030,
+};
+
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
+const struct iwl_cfg iwl6035_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
+	IWL_DEVICE_6035,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl1030_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl1030_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
+	IWL_DEVICE_6030,
+};
+
+const struct iwl_cfg iwl130_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+	.rx_with_siso_diversity = true,
+};
+
+const struct iwl_cfg iwl130_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+	IWL_DEVICE_6030,
+	.rx_with_siso_diversity = true,
+};
+
+/*
+ * "i": Internal configuration, use internal Power Amplifier
+ */
+#define IWL_DEVICE_6000i					\
+	.fw_name_pre = IWL6000_FW_PRE,				\
+	.ucode_api_max = IWL6000_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6000_UCODE_API_OK,			\
+	.ucode_api_min = IWL6000_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6000i,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.nvm_ver = EEPROM_6000_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK
+
+const struct iwl_cfg iwl6000i_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
+	IWL_DEVICE_6000i,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6000i_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
+	IWL_DEVICE_6000i,
+};
+
+const struct iwl_cfg iwl6000i_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
+	IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6050,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.valid_tx_ant = ANT_AB,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */	\
+	.nvm_ver = EEPROM_6050_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl6050_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
+	IWL_DEVICE_6050,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+	IWL_DEVICE_6050,
+};
+
+#define IWL_DEVICE_6150						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6150,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.nvm_ver = EEPROM_6150_EEPROM_VERSION,		\
+	.nvm_calib_ver = EEPROM_6150_TX_POWER_VERSION,	\
+	.base_params = &iwl6050_base_params,			\
+	.eeprom_params = &iwl6000_eeprom_params,		\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
+const struct iwl_cfg iwl6150_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
+	IWL_DEVICE_6150,
+	.ht_params = &iwl6000_ht_params,
+};
+
+const struct iwl_cfg iwl6150_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
+	IWL_DEVICE_6150,
+};
+
+const struct iwl_cfg iwl6000_3agn_cfg = {
+	.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_ok = IWL6000_UCODE_API_OK,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.device_family = IWL_DEVICE_FAMILY_6000,
+	.max_inst_size = IWL60_RTC_INST_SIZE,
+	.max_data_size = IWL60_RTC_DATA_SIZE,
+	.nvm_ver = EEPROM_6000_EEPROM_VERSION,
+	.nvm_calib_ver = EEPROM_6000_TX_POWER_VERSION,
+	.base_params = &iwl6000_base_params,
+	.eeprom_params = &iwl6000_eeprom_params,
+	.ht_params = &iwl6000_ht_params,
+	.led_mode = IWL_LED_BLINK,
+};
+
+MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK));
+MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK));
+MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK));
+MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK));