Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 13 insertions, 269 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index de0920c74cdd..8e26bc825f23 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -24,28 +24,12 @@
  *
  *****************************************************************************/
 
-#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
 #include <linux/stringify.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-agn.h"
-#include "iwl-agn-hw.h"
-#include "iwl-trans.h"
-#include "iwl-shared.h"
+#include "iwl-config.h"
 #include "iwl-cfg.h"
-#include "iwl-prph.h"
+#include "iwl-agn-hw.h"
+#include "iwl-csr.h"
 
 /* Highest firmware API version supported */
 #define IWL5000_UCODE_API_MAX 5
@@ -59,268 +43,28 @@
 #define IWL5000_UCODE_API_MIN 1
 #define IWL5150_UCODE_API_MIN 1
 
+/* EEPROM versions */
+#define EEPROM_5000_TX_POWER_VERSION	(4)
+#define EEPROM_5000_EEPROM_VERSION	(0x11A)
+#define EEPROM_5050_TX_POWER_VERSION	(4)
+#define EEPROM_5050_EEPROM_VERSION	(0x21E)
+
 #define IWL5000_FW_PRE "iwlwifi-5000-"
 #define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode"
 
 #define IWL5150_FW_PRE "iwlwifi-5150-"
 #define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode"
 
-/* NIC configuration for 5000 series */
-static void iwl5000_nic_config(struct iwl_priv *priv)
-{
-	iwl_rf_config(priv);
-
-	/* W/A : NIC is stuck in a reset state after Early PCIe power off
-	 * (PCIe power is lost before PERST# is asserted),
-	 * causing ME FW to lose ownership and not being able to obtain it back.
-	 */
-	iwl_set_bits_mask_prph(trans(priv), APMG_PS_CTRL_REG,
-				APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
-				~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
-}
-
-static const struct iwl_sensitivity_ranges iwl5000_sensitivity = {
-	.min_nrg_cck = 100,
-	.auto_corr_min_ofdm = 90,
-	.auto_corr_min_ofdm_mrc = 170,
-	.auto_corr_min_ofdm_x1 = 105,
-	.auto_corr_min_ofdm_mrc_x1 = 220,
-
-	.auto_corr_max_ofdm = 120,
-	.auto_corr_max_ofdm_mrc = 210,
-	.auto_corr_max_ofdm_x1 = 120,
-	.auto_corr_max_ofdm_mrc_x1 = 240,
-
-	.auto_corr_min_cck = 125,
-	.auto_corr_max_cck = 200,
-	.auto_corr_min_cck_mrc = 200,
-	.auto_corr_max_cck_mrc = 400,
-	.nrg_th_cck = 100,
-	.nrg_th_ofdm = 100,
-
-	.barker_corr_th_min = 190,
-	.barker_corr_th_min_mrc = 390,
-	.nrg_th_cca = 62,
-};
-
-static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
-	.min_nrg_cck = 95,
-	.auto_corr_min_ofdm = 90,
-	.auto_corr_min_ofdm_mrc = 170,
-	.auto_corr_min_ofdm_x1 = 105,
-	.auto_corr_min_ofdm_mrc_x1 = 220,
-
-	.auto_corr_max_ofdm = 120,
-	.auto_corr_max_ofdm_mrc = 210,
-	/* max = min for performance bug in 5150 DSP */
-	.auto_corr_max_ofdm_x1 = 105,
-	.auto_corr_max_ofdm_mrc_x1 = 220,
-
-	.auto_corr_min_cck = 125,
-	.auto_corr_max_cck = 200,
-	.auto_corr_min_cck_mrc = 170,
-	.auto_corr_max_cck_mrc = 400,
-	.nrg_th_cck = 95,
-	.nrg_th_ofdm = 95,
-
-	.barker_corr_th_min = 190,
-	.barker_corr_th_min_mrc = 390,
-	.nrg_th_cca = 62,
-};
-
-#define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF	(-5)
-
-static s32 iwl_temp_calib_to_offset(struct iwl_shared *shrd)
-{
-	u16 temperature, voltage;
-	__le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(shrd,
-				EEPROM_KELVIN_TEMPERATURE);
-
-	temperature = le16_to_cpu(temp_calib[0]);
-	voltage = le16_to_cpu(temp_calib[1]);
-
-	/* offset = temp - volt / coeff */
-	return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
-}
-
-static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
-{
-	const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
-	s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
-			iwl_temp_calib_to_offset(priv->shrd);
-
-	hw_params(priv).ct_kill_threshold = threshold * volt2temp_coef;
-}
-
-static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
-{
-	/* want Celsius */
-	hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
-}
-
-static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
-{
-	hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
-					BIT(IEEE80211_BAND_5GHZ);
-
-	hw_params(priv).tx_chains_num =
-		num_of_ant(hw_params(priv).valid_tx_ant);
-	hw_params(priv).rx_chains_num =
-		num_of_ant(hw_params(priv).valid_rx_ant);
-
-	iwl5000_set_ct_threshold(priv);
-
-	/* Set initial sensitivity parameters */
-	hw_params(priv).sens = &iwl5000_sensitivity;
-}
-
-static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
-{
-	hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
-					BIT(IEEE80211_BAND_5GHZ);
-
-	hw_params(priv).tx_chains_num =
-		num_of_ant(hw_params(priv).valid_tx_ant);
-	hw_params(priv).rx_chains_num =
-		num_of_ant(hw_params(priv).valid_rx_ant);
-
-	iwl5150_set_ct_threshold(priv);
-
-	/* Set initial sensitivity parameters */
-	hw_params(priv).sens = &iwl5150_sensitivity;
-}
-
-static void iwl5150_temperature(struct iwl_priv *priv)
-{
-	u32 vt = 0;
-	s32 offset =  iwl_temp_calib_to_offset(priv->shrd);
-
-	vt = le32_to_cpu(priv->statistics.common.temperature);
-	vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
-	/* now vt hold the temperature in Kelvin */
-	priv->temperature = KELVIN_TO_CELSIUS(vt);
-	iwl_tt_handler(priv);
-}
-
-static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
-				     struct ieee80211_channel_switch *ch_switch)
-{
-	/*
-	 * MULTI-FIXME
-	 * See iwlagn_mac_channel_switch.
-	 */
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	struct iwl5000_channel_switch_cmd cmd;
-	const struct iwl_channel_info *ch_info;
-	u32 switch_time_in_usec, ucode_switch_time;
-	u16 ch;
-	u32 tsf_low;
-	u8 switch_count;
-	u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
-	struct ieee80211_vif *vif = ctx->vif;
-	struct iwl_host_cmd hcmd = {
-		.id = REPLY_CHANNEL_SWITCH,
-		.len = { sizeof(cmd), },
-		.flags = CMD_SYNC,
-		.data = { &cmd, },
-	};
-
-	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
-	ch = ch_switch->channel->hw_value;
-	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
-		      ctx->active.channel, ch);
-	cmd.channel = cpu_to_le16(ch);
-	cmd.rxon_flags = ctx->staging.flags;
-	cmd.rxon_filter_flags = ctx->staging.filter_flags;
-	switch_count = ch_switch->count;
-	tsf_low = ch_switch->timestamp & 0x0ffffffff;
-	/*
-	 * calculate the ucode channel switch time
-	 * adding TSF as one of the factor for when to switch
-	 */
-	if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
-		if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
-		    beacon_interval)) {
-			switch_count -= (priv->ucode_beacon_time -
-				tsf_low) / beacon_interval;
-		} else
-			switch_count = 0;
-	}
-	if (switch_count <= 1)
-		cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
-	else {
-		switch_time_in_usec =
-			vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
-		ucode_switch_time = iwl_usecs_to_beacons(priv,
-							 switch_time_in_usec,
-							 beacon_interval);
-		cmd.switch_time = iwl_add_beacon_time(priv,
-						      priv->ucode_beacon_time,
-						      ucode_switch_time,
-						      beacon_interval);
-	}
-	IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
-		      cmd.switch_time);
-	ch_info = iwl_get_channel_info(priv, priv->band, ch);
-	if (ch_info)
-		cmd.expect_beacon = is_channel_radar(ch_info);
-	else {
-		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
-			ctx->active.channel, ch);
-		return -EFAULT;
-	}
-
-	return iwl_dvm_send_cmd(priv, &hcmd);
-}
-
-static struct iwl_lib_ops iwl5000_lib = {
-	.set_hw_params = iwl5000_hw_set_hw_params,
-	.set_channel_switch = iwl5000_hw_channel_switch,
-	.nic_config = iwl5000_nic_config,
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REG_BAND_1_CHANNELS,
-			EEPROM_REG_BAND_2_CHANNELS,
-			EEPROM_REG_BAND_3_CHANNELS,
-			EEPROM_REG_BAND_4_CHANNELS,
-			EEPROM_REG_BAND_5_CHANNELS,
-			EEPROM_REG_BAND_24_HT40_CHANNELS,
-			EEPROM_REG_BAND_52_HT40_CHANNELS
-		},
-	},
-	.temperature = iwlagn_temperature,
-};
-
-static struct iwl_lib_ops iwl5150_lib = {
-	.set_hw_params = iwl5150_hw_set_hw_params,
-	.set_channel_switch = iwl5000_hw_channel_switch,
-	.nic_config = iwl5000_nic_config,
-	.eeprom_ops = {
-		.regulatory_bands = {
-			EEPROM_REG_BAND_1_CHANNELS,
-			EEPROM_REG_BAND_2_CHANNELS,
-			EEPROM_REG_BAND_3_CHANNELS,
-			EEPROM_REG_BAND_4_CHANNELS,
-			EEPROM_REG_BAND_5_CHANNELS,
-			EEPROM_REG_BAND_24_HT40_CHANNELS,
-			EEPROM_REG_BAND_52_HT40_CHANNELS
-		},
-	},
-	.temperature = iwl5150_temperature,
-};
-
 static const struct iwl_base_params iwl5000_base_params = {
 	.eeprom_size = IWLAGN_EEPROM_IMG_SIZE,
 	.num_of_queues = IWLAGN_NUM_QUEUES,
-	.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
 	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
 	.led_compensation = 51,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
-	.wd_timeout = IWL_LONG_WD_TIMEOUT,
+	.wd_timeout = IWL_WATCHHDOG_DISABLED,
 	.max_event_log_size = 512,
 	.no_idle_support = true,
-	.wd_disable = true,
 };
 
 static const struct iwl_ht_params iwl5000_ht_params = {
@@ -332,11 +76,11 @@ static const struct iwl_ht_params iwl5000_ht_params = {
 	.ucode_api_max = IWL5000_UCODE_API_MAX,			\
 	.ucode_api_ok = IWL5000_UCODE_API_OK,			\
 	.ucode_api_min = IWL5000_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_5000,		\
 	.max_inst_size = IWLAGN_RTC_INST_SIZE,			\
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,	\
-	.lib = &iwl5000_lib,					\
 	.base_params = &iwl5000_base_params,			\
 	.led_mode = IWL_LED_BLINK
 
@@ -378,11 +122,11 @@ const struct iwl_cfg iwl5350_agn_cfg = {
 	.ucode_api_max = IWL5000_UCODE_API_MAX,
 	.ucode_api_ok = IWL5000_UCODE_API_OK,
 	.ucode_api_min = IWL5000_UCODE_API_MIN,
+	.device_family = IWL_DEVICE_FAMILY_5000,
 	.max_inst_size = IWLAGN_RTC_INST_SIZE,
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
-	.lib = &iwl5000_lib,
 	.base_params = &iwl5000_base_params,
 	.ht_params = &iwl5000_ht_params,
 	.led_mode = IWL_LED_BLINK,
@@ -394,11 +138,11 @@ const struct iwl_cfg iwl5350_agn_cfg = {
 	.ucode_api_max = IWL5150_UCODE_API_MAX,			\
 	.ucode_api_ok = IWL5150_UCODE_API_OK,			\
 	.ucode_api_min = IWL5150_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_5150,		\
 	.max_inst_size = IWLAGN_RTC_INST_SIZE,			\
 	.max_data_size = IWLAGN_RTC_DATA_SIZE,			\
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,		\
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,	\
-	.lib = &iwl5150_lib,					\
 	.base_params = &iwl5000_base_params,			\
 	.no_xtal_calib = true,					\
 	.led_mode = IWL_LED_BLINK,				\