treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

4 files changed, 19 insertions, 19 deletions

diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index 4e968912e27c..6a6ce9d4aeee 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -2,7 +2,7 @@
 config WLAN_VENDOR_INTERSIL
 	bool "Intersil devices"
 	default y
-	---help---
+	help
 	  If you have a wireless card belonging to this class, say Y.
 
 	  Note that the answer to this question doesn't directly affect the
@@ -23,7 +23,7 @@ config PRISM54
 	select WEXT_SPY
 	select WEXT_PRIV
 	select FW_LOADER
-	---help---
+	help
 	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
 	  driver is now deprecated in favor for the SoftMAC driver, p54pci.
 	  p54pci supports FullMAC PCI/Cardbus devices as well.
diff --git a/drivers/net/wireless/intersil/hostap/Kconfig b/drivers/net/wireless/intersil/hostap/Kconfig
index c70dc168dc63..6ad88299432f 100644
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ b/drivers/net/wireless/intersil/hostap/Kconfig
@@ -15,7 +15,7 @@ config HOSTAP
 	select LIB80211_CRYPT_WEP
 	select LIB80211_CRYPT_TKIP
 	select LIB80211_CRYPT_CCMP
-	---help---
+	help
 	Shared driver code for IEEE 802.11b wireless cards based on
 	Intersil Prism2/2.5/3 chipset. This driver supports so called
 	Host AP mode that allows the card to act as an IEEE 802.11
@@ -36,7 +36,7 @@ config HOSTAP
 config HOSTAP_FIRMWARE
 	bool "Support downloading firmware images with Host AP driver"
 	depends on HOSTAP
-	---help---
+	help
 	Configure Host AP driver to include support for firmware image
 	download. This option by itself only enables downloading to the
 	volatile memory, i.e. the card RAM. This option is required to
@@ -49,7 +49,7 @@ config HOSTAP_FIRMWARE
 config HOSTAP_FIRMWARE_NVRAM
 	bool "Support for non-volatile firmware download"
 	depends on HOSTAP_FIRMWARE
-	---help---
+	help
 	Allow Host AP driver to write firmware images to the non-volatile
 	card memory, i.e. flash memory that survives power cycling.
 	Enable this option if you want to be able to change card firmware
@@ -61,7 +61,7 @@ config HOSTAP_FIRMWARE_NVRAM
 config HOSTAP_PLX
 	tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors"
 	depends on PCI && HOSTAP
-	---help---
+	help
 	Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based
 	PCI adaptors.
 
@@ -75,7 +75,7 @@ config HOSTAP_PLX
 config HOSTAP_PCI
 	tristate "Host AP driver for Prism2.5 PCI adaptors"
 	depends on PCI && HOSTAP
-	---help---
+	help
 	Host AP driver's version for Prism2.5 PCI adaptors.
 
 	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
@@ -88,7 +88,7 @@ config HOSTAP_PCI
 config HOSTAP_CS
 	tristate "Host AP driver for Prism2/2.5/3 PC Cards"
 	depends on PCMCIA && HOSTAP
-	---help---
+	help
 	Host AP driver's version for Prism2/2.5/3 PC Cards.
 
 	"Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this
diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig
index c430d7a46730..c470ee23673f 100644
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ b/drivers/net/wireless/intersil/orinoco/Kconfig
@@ -10,7 +10,7 @@ config HERMES
 	select FW_LOADER
 	select CRYPTO
 	select CRYPTO_MICHAEL_MIC
-	---help---
+	help
 	  A driver for 802.11b wireless cards based on the "Hermes" or
 	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast
 	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
@@ -32,7 +32,7 @@ config HERMES
 config HERMES_PRISM
 	bool "Support Prism 2/2.5 chipset"
 	depends on HERMES
-	---help---
+	help
 
 	  Say Y to enable support for Prism 2 and 2.5 chipsets.  These
 	  chipsets are better handled by the hostap driver.  This driver
@@ -44,7 +44,7 @@ config HERMES_CACHE_FW_ON_INIT
 	bool "Cache Hermes firmware on driver initialisation"
 	depends on HERMES
 	default y
-	---help---
+	help
 	  Say Y to cache any firmware required by the Hermes drivers
 	  on startup.  The firmware will remain cached until the
 	  driver is unloaded.  The cache uses 64K of RAM.
@@ -110,7 +110,7 @@ config PCI_HERMES
 config PCMCIA_HERMES
 	tristate "Hermes PCMCIA card support"
 	depends on PCMCIA && HERMES && HAS_IOPORT_MAP
-	---help---
+	help
 	  A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
 	  as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
 	  EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
@@ -125,7 +125,7 @@ config PCMCIA_HERMES
 config PCMCIA_SPECTRUM
 	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
 	depends on PCMCIA && HERMES && HAS_IOPORT_MAP
-	---help---
+	help
 
 	  This is a driver for 802.11b cards using RAM-loadable Symbol
 	  firmware, such as Symbol Wireless Networker LA4100, CompactFlash
@@ -139,5 +139,5 @@ config ORINOCO_USB
 	tristate "Agere Orinoco USB support"
 	depends on USB && HERMES
 	select FW_LOADER
-	---help---
+	help
 	  This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/intersil/p54/Kconfig b/drivers/net/wireless/intersil/p54/Kconfig
index 26cd80732afa..024be5507daf 100644
--- a/drivers/net/wireless/intersil/p54/Kconfig
+++ b/drivers/net/wireless/intersil/p54/Kconfig
@@ -4,7 +4,7 @@ config P54_COMMON
 	depends on MAC80211
 	select FW_LOADER
 	select CRC_CCITT
-	---help---
+	help
 	  This is common code for isl38xx/stlc45xx based modules.
 	  This module does nothing by itself - the USB/PCI/SPI front-ends
 	  also need to be enabled in order to support any devices.
@@ -18,7 +18,7 @@ config P54_USB
 	tristate "Prism54 USB support"
 	depends on P54_COMMON && USB
 	select CRC32
-	---help---
+	help
 	  This driver is for USB isl38xx based wireless cards.
 
 	  These devices require softmac firmware which can be found at
@@ -29,7 +29,7 @@ config P54_USB
 config P54_PCI
 	tristate "Prism54 PCI support"
 	depends on P54_COMMON && PCI
-	---help---
+	help
 	  This driver is for PCI isl38xx based wireless cards.
 	  This driver supports most devices that are supported by the
 	  fullmac prism54 driver plus many devices which are not
@@ -43,7 +43,7 @@ config P54_PCI
 config P54_SPI
 	tristate "Prism54 SPI (stlc45xx) support"
 	depends on P54_COMMON && SPI_MASTER
-	---help---
+	help
 	  This driver is for stlc4550 or stlc4560 based wireless chips
 	  such as Nokia's N800/N810 Portable Internet Tablet.
 
@@ -53,7 +53,7 @@ config P54_SPI_DEFAULT_EEPROM
 	bool "Include fallback EEPROM blob"
 	depends on P54_SPI
 	default n
-	---help---
+	help
 	 Unlike the PCI or USB devices, the SPI variants don't have
 	 a dedicated EEPROM chip to store all device specific values
 	 for calibration, country and interface settings.