Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.

 2) Use bio_vec in the networking instead of custom skb_frag_t, from
    Matthew Wilcox.

 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.

 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.

 5) Support all variants of 5750X bnxt_en chips, from Michael Chan.

 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
    Buslov.

 7) Add TCP syn cookies bpf helper, from Petar Penkov.

 8) Add 'nettest' to selftests and use it, from David Ahern.

 9) Add extack support to drop_monitor, add packet alert mode and
    support for HW drops, from Ido Schimmel.

10) Add VLAN offload to stmmac, from Jose Abreu.

11) Lots of devm_platform_ioremap_resource() conversions, from
    YueHaibing.

12) Add IONIC driver, from Shannon Nelson.

13) Several kTLS cleanups, from Jakub Kicinski.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
  mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
  mlxsw: spectrum: Register CPU port with devlink
  mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
  net: ena: fix incorrect update of intr_delay_resolution
  net: ena: fix retrieval of nonadaptive interrupt moderation intervals
  net: ena: fix update of interrupt moderation register
  net: ena: remove all old adaptive rx interrupt moderation code from ena_com
  net: ena: remove ena_restore_ethtool_params() and relevant fields
  net: ena: remove old adaptive interrupt moderation code from ena_netdev
  net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
  net: ena: enable the interrupt_moderation in driver_supported_features
  net: ena: reimplement set/get_coalesce()
  net: ena: switch to dim algorithm for rx adaptive interrupt moderation
  net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
  net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
  ethtool: implement Energy Detect Powerdown support via phy-tunable
  xen-netfront: do not assume sk_buff_head list is empty in error handling
  s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
  net: ena: don't wake up tx queue when down
  drop_monitor: Better sanitize notified packets
  ...

1 files changed, 34 insertions, 17 deletions

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
index 6c04f8223aff..214495a7165f 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h
@@ -161,7 +161,8 @@ static inline u8 num_of_ant(u8 mask)
 		!!((mask) & ANT_C);
 }
 
-/*
+/**
+ * struct iwl_base_params - params not likely to change within a device family
  * @max_ll_items: max number of OTP blocks
  * @shadow_ram_support: shadow support for OTP memory
  * @led_compensation: compensate on the led on/off time per HW according
@@ -331,7 +332,36 @@ struct iwl_csr_params {
 };
 
 /**
+ * struct iwl_cfg_trans - information needed to start the trans
+ *
+ * These values cannot be changed when multiple configs are used for a
+ * single PCI ID, because they are needed before the HW REV or RFID
+ * can be read.
+ *
+ * @base_params: pointer to basic parameters
+ * @csr: csr flags and addresses that are different across devices
+ * @device_family: the device family
+ * @umac_prph_offset: offset to add to UMAC periphery address
+ * @rf_id: need to read rf_id to determine the firmware image
+ * @use_tfh: use TFH
+ * @gen2: 22000 and on transport operation
+ * @mq_rx_supported: multi-queue rx support
+ */
+struct iwl_cfg_trans_params {
+	const struct iwl_base_params *base_params;
+	const struct iwl_csr_params *csr;
+	enum iwl_device_family device_family;
+	u32 umac_prph_offset;
+	u32 rf_id:1,
+	    use_tfh:1,
+	    gen2:1,
+	    mq_rx_supported:1,
+	    bisr_workaround:1;
+};
+
+/**
  * struct iwl_cfg
+ * @trans: the trans-specific configuration part
  * @name: Official name of the device
  * @fw_name_pre: Firmware filename prefix. The api version and extension
  *	(.ucode) will be added to filename before loading from disk. The
@@ -346,10 +376,10 @@ struct iwl_csr_params {
  * @nvm_ver: NVM version
  * @nvm_calib_ver: NVM calibration version
  * @lib: pointer to the lib ops
- * @base_params: pointer to basic parameters
  * @ht_params: point to ht parameters
  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @tx_with_siso_diversity: 1x1 device with tx antenna diversity
  * @internal_wimax_coex: internal wifi/wimax combo device
  * @high_temp: Is this NIC is designated to be in high temperature.
  * @host_interrupt_operation_mode: device needs host interrupt operation
@@ -358,7 +388,6 @@ struct iwl_csr_params {
  * @mac_addr_from_csr: read HW address from CSR registers
  * @features: hw features, any combination of feature_whitelist
  * @pwr_tx_backoffs: translation table between power limits and backoffs
- * @csr: csr flags and addresses that are different across devices
  * @max_rx_agg_size: max RX aggregation size of the ADDBA request/response
  * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
  * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
@@ -371,18 +400,14 @@ struct iwl_csr_params {
  * @dccm2_len: length of the second DCCM
  * @smem_offset: offset from which the SMEM begins
  * @smem_len: the length of SMEM
- * @mq_rx_supported: multi-queue rx support
  * @vht_mu_mimo_supported: VHT MU-MIMO support
- * @rf_id: need to read rf_id to determine the firmware image
  * @integrated: discrete or integrated
- * @gen2: 22000 and on transport operation
  * @cdb: CDB support
  * @nvm_type: see &enum iwl_nvm_type
  * @d3_debug_data_base_addr: base address where D3 debug data is stored
  * @d3_debug_data_length: length of the D3 debug data
  * @bisr_workaround: BISR hardware workaround (for 22260 series devices)
  * @min_txq_size: minimum number of slots required in a TX queue
- * @umac_prph_offset: offset to add to UMAC periphery address
  * @uhb_supported: ultra high band channels supported
  * @min_256_ba_txq_size: minimum number of slots required in a TX queue which
  *	supports 256 BA aggregation
@@ -392,19 +417,16 @@ struct iwl_csr_params {
  * and/or the uCode API version instead.
  */
 struct iwl_cfg {
+	struct iwl_cfg_trans_params trans;
 	/* params specific to an individual device within a device family */
 	const char *name;
 	const char *fw_name_pre;
-	/* params not likely to change within a device family */
-	const struct iwl_base_params *base_params;
 	/* params likely to change within a device family */
 	const struct iwl_ht_params *ht_params;
 	const struct iwl_eeprom_params *eeprom_params;
 	const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
 	const char *default_nvm_file_C_step;
 	const struct iwl_tt_params *thermal_params;
-	const struct iwl_csr_params *csr;
-	enum iwl_device_family device_family;
 	enum iwl_led_mode led_mode;
 	enum iwl_nvm_type nvm_type;
 	u32 max_data_size;
@@ -420,6 +442,7 @@ struct iwl_cfg {
 	u16 nvm_ver;
 	u16 nvm_calib_ver;
 	u32 rx_with_siso_diversity:1,
+	    tx_with_siso_diversity:1,
 	    bt_shared_single_ant:1,
 	    internal_wimax_coex:1,
 	    host_interrupt_operation_mode:1,
@@ -428,15 +451,10 @@ struct iwl_cfg {
 	    lp_xtal_workaround:1,
 	    disable_dummy_notification:1,
 	    apmg_not_supported:1,
-	    mq_rx_supported:1,
 	    vht_mu_mimo_supported:1,
-	    rf_id:1,
 	    integrated:1,
-	    use_tfh:1,
-	    gen2:1,
 	    cdb:1,
 	    dbgc_supported:1,
-	    bisr_workaround:1,
 	    uhb_supported:1;
 	u8 valid_tx_ant;
 	u8 valid_rx_ant;
@@ -453,7 +471,6 @@ struct iwl_cfg {
 	u32 d3_debug_data_base_addr;
 	u32 d3_debug_data_length;
 	u32 min_txq_size;
-	u32 umac_prph_offset;
 	u32 fw_mon_smem_write_ptr_addr;
 	u32 fw_mon_smem_write_ptr_msk;
 	u32 fw_mon_smem_cycle_cnt_ptr_addr;