diff options
| author | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2008-10-15 11:31:54 +1100 |
|---|---|---|
| committer | Benjamin Herrenschmidt <benh@kernel.crashing.org> | 2008-10-15 11:31:54 +1100 |
| commit | 6dc6472581f693b5fc95aebedf67b4960fb85cf0 (patch) | |
| tree | 06a5a9a08519950575505273eabced331ed51405 /drivers/net/wireless/b43 | |
| parent | ee673eaa72d8d185012b1027a05e25aba18c267f (diff) | |
| parent | 8acd3a60bcca17c6d89c73cee3ad6057eb83ba1e (diff) | |
| download | linux-6dc6472581f693b5fc95aebedf67b4960fb85cf0.tar.bz2 | |
Merge commit 'origin'
Manual fixup of conflicts on:
arch/powerpc/include/asm/dcr-regs.h
drivers/net/ibm_newemac/core.h
Diffstat (limited to 'drivers/net/wireless/b43')
25 files changed, 4869 insertions, 3472 deletions
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 1fa043d1802c..1f81d36f87c5 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -80,6 +80,18 @@ config B43_NPHY SAY N. +config B43_PHY_LP + bool "IEEE 802.11g LP-PHY support (BROKEN)" + depends on B43 && EXPERIMENTAL && BROKEN + ---help--- + Support for the LP-PHY. + The LP-PHY is an IEEE 802.11g based PHY built into some notebooks + and embedded devices. + + THIS IS BROKEN AND DOES NOT WORK YET. + + SAY N. + # This config option automatically enables b43 LEDS support, # if it's possible. config B43_LEDS diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile index 8c52b0b9862a..14a02b3aea53 100644 --- a/drivers/net/wireless/b43/Makefile +++ b/drivers/net/wireless/b43/Makefile @@ -1,8 +1,11 @@ b43-y += main.o b43-y += tables.o b43-$(CONFIG_B43_NPHY) += tables_nphy.o -b43-y += phy.o -b43-$(CONFIG_B43_NPHY) += nphy.o +b43-y += phy_common.o +b43-y += phy_g.o +b43-y += phy_a.o +b43-$(CONFIG_B43_NPHY) += phy_n.o +b43-$(CONFIG_B43_PHY_LP) += phy_lp.o b43-y += sysfs.o b43-y += xmit.o b43-y += lo.o diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index edcdfa366452..427b8203e3f9 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -12,7 +12,7 @@ #include "leds.h" #include "rfkill.h" #include "lo.h" -#include "phy.h" +#include "phy_common.h" /* The unique identifier of the firmware that's officially supported by @@ -173,6 +173,11 @@ enum { #define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */ #define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */ #define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */ +/* TSSI information */ +#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_A 0x0068 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_SHM_SH_TSSI_OFDM_G 0x0070 /* TSSI for last 4 OFDM frames (32bit) */ +#define B43_TSSI_MAX 0x7F /* Max value for one TSSI value */ /* SHM_SHARED TX FIFO variables */ #define B43_SHM_SH_SIZE01 0x0098 /* TX FIFO size for FIFO 0 (low) and 1 (high) */ #define B43_SHM_SH_SIZE23 0x009A /* TX FIFO size for FIFO 2 and 3 */ @@ -508,122 +513,6 @@ struct b43_iv { } __attribute__((__packed__)); -struct b43_phy { - /* Band support flags. */ - bool supports_2ghz; - bool supports_5ghz; - - /* GMODE bit enabled? */ - bool gmode; - - /* Analog Type */ - u8 analog; - /* B43_PHYTYPE_ */ - u8 type; - /* PHY revision number. */ - u8 rev; - - /* Radio versioning */ - u16 radio_manuf; /* Radio manufacturer */ - u16 radio_ver; /* Radio version */ - u8 radio_rev; /* Radio revision */ - - bool dyn_tssi_tbl; /* tssi2dbm is kmalloc()ed. */ - - /* ACI (adjacent channel interference) flags. */ - bool aci_enable; - bool aci_wlan_automatic; - bool aci_hw_rssi; - - /* Radio switched on/off */ - bool radio_on; - struct { - /* Values saved when turning the radio off. - * They are needed when turning it on again. */ - bool valid; - u16 rfover; - u16 rfoverval; - } radio_off_context; - - u16 minlowsig[2]; - u16 minlowsigpos[2]; - - /* TSSI to dBm table in use */ - const s8 *tssi2dbm; - /* Target idle TSSI */ - int tgt_idle_tssi; - /* Current idle TSSI */ - int cur_idle_tssi; - - /* LocalOscillator control values. */ - struct b43_txpower_lo_control *lo_control; - /* Values from b43_calc_loopback_gain() */ - s16 max_lb_gain; /* Maximum Loopback gain in hdB */ - s16 trsw_rx_gain; /* TRSW RX gain in hdB */ - s16 lna_lod_gain; /* LNA lod */ - s16 lna_gain; /* LNA */ - s16 pga_gain; /* PGA */ - - /* Desired TX power level (in dBm). - * This is set by the user and adjusted in b43_phy_xmitpower(). */ - u8 power_level; - /* A-PHY TX Power control value. */ - u16 txpwr_offset; - - /* Current TX power level attenuation control values */ - struct b43_bbatt bbatt; - struct b43_rfatt rfatt; - u8 tx_control; /* B43_TXCTL_XXX */ - - /* Hardware Power Control enabled? */ - bool hardware_power_control; - - /* Current Interference Mitigation mode */ - int interfmode; - /* Stack of saved values from the Interference Mitigation code. - * Each value in the stack is layed out as follows: - * bit 0-11: offset - * bit 12-15: register ID - * bit 16-32: value - * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT - */ -#define B43_INTERFSTACK_SIZE 26 - u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure - - /* Saved values from the NRSSI Slope calculation */ - s16 nrssi[2]; - s32 nrssislope; - /* In memory nrssi lookup table. */ - s8 nrssi_lt[64]; - - /* current channel */ - u8 channel; - - u16 lofcal; - - u16 initval; //FIXME rename? - - /* PHY TX errors counter. */ - atomic_t txerr_cnt; - - /* The device does address auto increment for the OFDM tables. - * We cache the previously used address here and omit the address - * write on the next table access, if possible. */ - u16 ofdmtab_addr; /* The address currently set in hardware. */ - enum { /* The last data flow direction. */ - B43_OFDMTAB_DIRECTION_UNKNOWN = 0, - B43_OFDMTAB_DIRECTION_READ, - B43_OFDMTAB_DIRECTION_WRITE, - } ofdmtab_addr_direction; - -#if B43_DEBUG - /* Manual TX-power control enabled? */ - bool manual_txpower_control; - /* PHY registers locked by b43_phy_lock()? */ - bool phy_locked; -#endif /* B43_DEBUG */ -}; - /* Data structures for DMA transmission, per 80211 core. */ struct b43_dma { struct b43_dmaring *tx_ring_AC_BK; /* Background */ @@ -680,7 +569,7 @@ struct b43_key { #define B43_QOS_VOICE B43_QOS_PARAMS(3) /* QOS parameter hardware data structure offsets. */ -#define B43_NR_QOSPARAMS 22 +#define B43_NR_QOSPARAMS 16 enum { B43_QOSPARAM_TXOP = 0, B43_QOSPARAM_CWMIN, @@ -696,8 +585,6 @@ enum { struct b43_qos_params { /* The QOS parameters */ struct ieee80211_tx_queue_params p; - /* Does this need to get uploaded to hardware? */ - bool need_hw_update; }; struct b43_wldev; @@ -759,11 +646,13 @@ struct b43_wl { bool beacon_templates_virgin; /* Never wrote the templates? */ struct work_struct beacon_update_trigger; - /* The current QOS parameters for the 4 queues. - * This is protected by the irq_lock. */ + /* The current QOS parameters for the 4 queues. */ struct b43_qos_params qos_params[4]; - /* Workqueue for updating QOS parameters in hardware. */ - struct work_struct qos_update_work; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; }; /* In-memory representation of a cached microcode file. */ @@ -908,6 +797,15 @@ static inline int b43_is_mode(struct b43_wl *wl, int type) return (wl->operating && wl->if_type == type); } +/** + * b43_current_band - Returns the currently used band. + * Returns one of IEEE80211_BAND_2GHZ and IEEE80211_BAND_5GHZ. + */ +static inline enum ieee80211_band b43_current_band(struct b43_wl *wl) +{ + return wl->hw->conf.channel->band; +} + static inline u16 b43_read16(struct b43_wldev *dev, u16 offset) { return ssb_read16(dev->dev, offset); diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c index 29851bc1101f..06a01da80160 100644 --- a/drivers/net/wireless/b43/debugfs.c +++ b/drivers/net/wireless/b43/debugfs.c @@ -443,76 +443,6 @@ out_unlock: return count; } -static ssize_t txpower_g_read_file(struct b43_wldev *dev, - char *buf, size_t bufsize) -{ - ssize_t count = 0; - - if (dev->phy.type != B43_PHYTYPE_G) { - fappend("Device is not a G-PHY\n"); - goto out; - } - fappend("Control: %s\n", dev->phy.manual_txpower_control ? - "MANUAL" : "AUTOMATIC"); - fappend("Baseband attenuation: %u\n", dev->phy.bbatt.att); - fappend("Radio attenuation: %u\n", dev->phy.rfatt.att); - fappend("TX Mixer Gain: %s\n", - (dev->phy.tx_control & B43_TXCTL_TXMIX) ? "ON" : "OFF"); - fappend("PA Gain 2dB: %s\n", - (dev->phy.tx_control & B43_TXCTL_PA2DB) ? "ON" : "OFF"); - fappend("PA Gain 3dB: %s\n", - (dev->phy.tx_control & B43_TXCTL_PA3DB) ? "ON" : "OFF"); - fappend("\n\n"); - fappend("You can write to this file:\n"); - fappend("Writing \"auto\" enables automatic txpower control.\n"); - fappend - ("Writing the attenuation values as \"bbatt rfatt txmix pa2db pa3db\" " - "enables manual txpower control.\n"); - fappend("Example: 5 4 0 0 1\n"); - fappend("Enables manual control with Baseband attenuation 5, " - "Radio attenuation 4, No TX Mixer Gain, " - "No PA Gain 2dB, With PA Gain 3dB.\n"); -out: - return count; -} - -static int txpower_g_write_file(struct b43_wldev *dev, - const char *buf, size_t count) -{ - if (dev->phy.type != B43_PHYTYPE_G) - return -ENODEV; - if ((count >= 4) && (memcmp(buf, "auto", 4) == 0)) { - /* Automatic control */ - dev->phy.manual_txpower_control = 0; - b43_phy_xmitpower(dev); - } else { - int bbatt = 0, rfatt = 0, txmix = 0, pa2db = 0, pa3db = 0; - /* Manual control */ - if (sscanf(buf, "%d %d %d %d %d", &bbatt, &rfatt, - &txmix, &pa2db, &pa3db) != 5) - return -EINVAL; - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - dev->phy.manual_txpower_control = 1; - dev->phy.bbatt.att = bbatt; - dev->phy.rfatt.att = rfatt; - dev->phy.tx_control = 0; - if (txmix) - dev->phy.tx_control |= B43_TXCTL_TXMIX; - if (pa2db) - dev->phy.tx_control |= B43_TXCTL_PA2DB; - if (pa3db) - dev->phy.tx_control |= B43_TXCTL_PA3DB; - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_set_txpower_g(dev, &dev->phy.bbatt, - &dev->phy.rfatt, dev->phy.tx_control); - b43_radio_unlock(dev); - b43_phy_unlock(dev); - } - - return 0; -} - /* wl->irq_lock is locked */ static int restart_write_file(struct b43_wldev *dev, const char *buf, size_t count) @@ -560,7 +490,7 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, err = -ENODEV; goto out; } - lo = phy->lo_control; + lo = phy->g->lo_control; fappend("-- Local Oscillator calibration data --\n\n"); fappend("HW-power-control enabled: %d\n", dev->phy.hardware_power_control); @@ -578,8 +508,8 @@ static ssize_t loctls_read_file(struct b43_wldev *dev, list_for_each_entry(cal, &lo->calib_list, list) { bool active; - active = (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && - b43_compare_rfatt(&cal->rfatt, &phy->rfatt)); + active = (b43_compare_bbatt(&cal->bbatt, &phy->g->bbatt) && + b43_compare_rfatt(&cal->rfatt, &phy->g->rfatt)); fappend("BB(%d), RF(%d,%d) -> I=%d, Q=%d " "(expires in %lu sec)%s\n", cal->bbatt.att, @@ -763,7 +693,6 @@ B43_DEBUGFS_FOPS(mmio32read, mmio32read__read_file, mmio32read__write_file, 1); B43_DEBUGFS_FOPS(mmio32write, NULL, mmio32write__write_file, 1); B43_DEBUGFS_FOPS(tsf, tsf_read_file, tsf_write_file, 1); B43_DEBUGFS_FOPS(txstat, txstat_read_file, NULL, 0); -B43_DEBUGFS_FOPS(txpower_g, txpower_g_read_file, txpower_g_write_file, 0); B43_DEBUGFS_FOPS(restart, NULL, restart_write_file, 1); B43_DEBUGFS_FOPS(loctls, loctls_read_file, NULL, 0); @@ -877,7 +806,6 @@ void b43_debugfs_add_device(struct b43_wldev *dev) ADD_FILE(mmio32write, 0200); ADD_FILE(tsf, 0600); ADD_FILE(txstat, 0400); - ADD_FILE(txpower_g, 0600); ADD_FILE(restart, 0200); ADD_FILE(loctls, 0400); @@ -907,7 +835,6 @@ void b43_debugfs_remove_device(struct b43_wldev *dev) debugfs_remove(e->file_mmio32write.dentry); debugfs_remove(e->file_tsf.dentry); debugfs_remove(e->file_txstat.dentry); - debugfs_remove(e->file_txpower_g.dentry); debugfs_remove(e->file_restart.dentry); debugfs_remove(e->file_loctls.dentry); diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c index 9c854d6aae36..6a18a1470465 100644 --- a/drivers/net/wireless/b43/lo.c +++ b/drivers/net/wireless/b43/lo.c @@ -29,7 +29,7 @@ #include "b43.h" #include "lo.h" -#include "phy.h" +#include "phy_g.h" #include "main.h" #include <linux/delay.h> @@ -174,7 +174,8 @@ static u16 lo_txctl_register_table(struct b43_wldev *dev, static void lo_measure_txctl_values(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 reg, mask; u16 trsw_rx, pga; u16 radio_pctl_reg; @@ -195,7 +196,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) int lb_gain; /* Loopback gain (in dB) */ trsw_rx = 0; - lb_gain = phy->max_lb_gain / 2; + lb_gain = gphy->max_lb_gain / 2; if (lb_gain > 10) { radio_pctl_reg = 0; pga = abs(10 - lb_gain) / 6; @@ -226,7 +227,7 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) } b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) & 0xFFF0) | radio_pctl_reg); - b43_phy_set_baseband_attenuation(dev, 2); + b43_gphy_set_baseband_attenuation(dev, 2); reg = lo_txctl_register_table(dev, &mask, NULL); mask = ~mask; @@ -277,7 +278,8 @@ static void lo_measure_txctl_values(struct b43_wldev *dev) static void lo_read_power_vector(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; int i; u64 tmp; u64 power_vector = 0; @@ -298,6 +300,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev, s16 max_rx_gain, int use_trsw_rx) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp; if (max_rx_gain < 0) @@ -308,7 +311,7 @@ static void lo_measure_gain_values(struct b43_wldev *dev, int trsw_rx_gain; if (use_trsw_rx) { - trsw_rx_gain = phy->trsw_rx_gain / 2; + trsw_rx_gain = gphy->trsw_rx_gain / 2; if (max_rx_gain >= trsw_rx_gain) { trsw_rx_gain = max_rx_gain - trsw_rx_gain; trsw_rx = 0x20; @@ -316,38 +319,38 @@ static void lo_measure_gain_values(struct b43_wldev *dev, } else trsw_rx_gain = max_rx_gain; if (trsw_rx_gain < 9) { - phy->lna_lod_gain = 0; + gphy->lna_lod_gain = 0; } else { - phy->lna_lod_gain = 1; + gphy->lna_lod_gain = 1; trsw_rx_gain -= 8; } trsw_rx_gain = clamp_val(trsw_rx_gain, 0, 0x2D); - phy->pga_gain = trsw_rx_gain / 3; - if (phy->pga_gain >= 5) { - phy->pga_gain -= 5; - phy->lna_gain = 2; + gphy->pga_gain = trsw_rx_gain / 3; + if (gphy->pga_gain >= 5) { + gphy->pga_gain -= 5; + gphy->lna_gain = 2; } else - phy->lna_gain = 0; + gphy->lna_gain = 0; } else { - phy->lna_gain = 0; - phy->trsw_rx_gain = 0x20; + gphy->lna_gain = 0; + gphy->trsw_rx_gain = 0x20; if (max_rx_gain >= 0x14) { - phy->lna_lod_gain = 1; - phy->pga_gain = 2; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 2; } else if (max_rx_gain >= 0x12) { - phy->lna_lod_gain = 1; - phy->pga_gain = 1; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 1; } else if (max_rx_gain >= 0xF) { - phy->lna_lod_gain = 1; - phy->pga_gain = 0; + gphy->lna_lod_gain = 1; + gphy->pga_gain = 0; } else { - phy->lna_lod_gain = 0; - phy->pga_gain = 0; + gphy->lna_lod_gain = 0; + gphy->pga_gain = 0; } } tmp = b43_radio_read16(dev, 0x7A); - if (phy->lna_lod_gain == 0) + if (gphy->lna_lod_gain == 0) tmp &= ~0x0008; else tmp |= 0x0008; @@ -392,10 +395,11 @@ static void lo_measure_setup(struct b43_wldev *dev, { struct ssb_sprom *sprom = &dev->dev->bus->sprom; struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 tmp; - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { sav->phy_lo_mask = b43_phy_read(dev, B43_PHY_LO_MASK); sav->phy_extg_01 = b43_phy_read(dev, B43_PHY_EXTG(0x01)); sav->phy_dacctl_hwpctl = b43_phy_read(dev, B43_PHY_DACCTL); @@ -496,7 +500,7 @@ static void lo_measure_setup(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x2B), 0x0802); if (phy->rev >= 2) b43_dummy_transmission(dev); - b43_radio_selectchannel(dev, 6, 0); + b43_gphy_channel_switch(dev, 6, 0); b43_radio_read16(dev, 0x51); /* dummy read */ if (phy->type == B43_PHYTYPE_G) b43_phy_write(dev, B43_PHY_CCK(0x2F), 0); @@ -520,18 +524,19 @@ static void lo_measure_restore(struct b43_wldev *dev, struct lo_g_saved_values *sav) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp; if (phy->rev >= 2) { b43_phy_write(dev, B43_PHY_PGACTL, 0xE300); - tmp = (phy->pga_gain << 8); + tmp = (gphy->pga_gain << 8); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA0); udelay(5); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA2); udelay(2); b43_phy_write(dev, B43_PHY_RFOVERVAL, tmp | 0xA3); } else { - tmp = (phy->pga_gain | 0xEFA0); + tmp = (gphy->pga_gain | 0xEFA0); b43_phy_write(dev, B43_PHY_PGACTL, tmp); } if (phy->type == B43_PHYTYPE_G) { @@ -572,7 +577,7 @@ static void lo_measure_restore(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x3E), sav->phy_cck_3E); b43_phy_write(dev, B43_PHY_CRS0, sav->phy_crs0); } - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { tmp = (sav->phy_lo_mask & 0xBFFF); b43_phy_write(dev, B43_PHY_LO_MASK, tmp); b43_phy_write(dev, B43_PHY_EXTG(0x01), sav->phy_extg_01); @@ -580,7 +585,7 @@ static void lo_measure_restore(struct b43_wldev *dev, b43_phy_write(dev, B43_PHY_CCK(0x14), sav->phy_cck_14); b43_phy_write(dev, B43_PHY_HPWR_TSSICTL, sav->phy_hpwr_tssictl); } - b43_radio_selectchannel(dev, sav->old_channel, 1); + b43_gphy_channel_switch(dev, sav->old_channel, 1); } struct b43_lo_g_statemachine { @@ -597,6 +602,7 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, struct b43_lo_g_statemachine *d) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_loctl test_loctl; struct b43_loctl orig_loctl; struct b43_loctl prev_loctl = { @@ -646,9 +652,9 @@ static int lo_probe_possible_loctls(struct b43_wldev *dev, test_loctl.q != prev_loctl.q) && (abs(test_loctl.i) <= 16 && abs(test_loctl.q) <= 16)) { b43_lo_write(dev, &test_loctl); - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); if (feedth < d->lowest_feedth) { memcpy(probe_loctl, &test_loctl, sizeof(struct b43_loctl)); @@ -677,6 +683,7 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, int *max_rx_gain) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_lo_g_statemachine d; u16 feedth; int found_lower; @@ -693,17 +700,17 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev, max_repeat = 4; do { b43_lo_write(dev, &d.min_loctl); - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); if (feedth < 0x258) { if (feedth >= 0x12C) *max_rx_gain += 6; else *max_rx_gain += 3; - feedth = lo_measure_feedthrough(dev, phy->lna_gain, - phy->pga_gain, - phy->trsw_rx_gain); + feedth = lo_measure_feedthrough(dev, gphy->lna_gain, + gphy->pga_gain, + gphy->trsw_rx_gain); } d.lowest_feedth = feedth; @@ -752,6 +759,7 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, const struct b43_rfatt *rfatt) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct b43_loctl loctl = { .i = 0, .q = 0, @@ -782,11 +790,11 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev, if (rfatt->with_padmix) max_rx_gain -= pad_mix_gain; if (has_loopback_gain(phy)) - max_rx_gain += phy->max_lb_gain; + max_rx_gain += gphy->max_lb_gain; lo_measure_gain_values(dev, max_rx_gain, has_loopback_gain(phy)); - b43_phy_set_baseband_attenuation(dev, bbatt->att); + b43_gphy_set_baseband_attenuation(dev, bbatt->att); lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain); lo_measure_restore(dev, &saved_regs); @@ -820,7 +828,7 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, const struct b43_bbatt *bbatt, const struct b43_rfatt *rfatt) { - struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; struct b43_lo_calib *c; c = b43_find_lo_calib(lo, bbatt, rfatt); @@ -839,7 +847,8 @@ struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev, void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; int i; int rf_offset, bb_offset; const struct b43_rfatt *rfatt; @@ -917,14 +926,14 @@ static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf) void b43_lo_g_adjust(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; struct b43_lo_calib *cal; struct b43_rfatt rf; - memcpy(&rf, &phy->rfatt, sizeof(rf)); + memcpy(&rf, &gphy->rfatt, sizeof(rf)); b43_lo_fixup_rfatt(&rf); - cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf); + cal = b43_get_calib_lo_settings(dev, &gphy->bbatt, &rf); if (!cal) return; b43_lo_write(dev, &cal->ctl); @@ -952,7 +961,8 @@ void b43_lo_g_adjust_to(struct b43_wldev *dev, void b43_lo_g_maintanance_work(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; unsigned long now; unsigned long expire; struct b43_lo_calib *cal, *tmp; @@ -962,7 +972,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) if (!lo) return; now = jiffies; - hwpctl = b43_has_hardware_pctl(phy); + hwpctl = b43_has_hardware_pctl(dev); if (hwpctl) { /* Read the power vector and update it, if needed. */ @@ -983,8 +993,8 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) if (!time_before(cal->calib_time, expire)) continue; /* This item expired. */ - if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) && - b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) { + if (b43_compare_bbatt(&cal->bbatt, &gphy->bbatt) && + b43_compare_rfatt(&cal->rfatt, &gphy->rfatt)) { B43_WARN_ON(current_item_expired); current_item_expired = 1; } @@ -1002,7 +1012,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) /* Recalibrate currently used LO setting. */ if (b43_debug(dev, B43_DBG_LO)) b43dbg(dev->wl, "LO: Recalibrating current LO setting\n"); - cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt); + cal = b43_calibrate_lo_setting(dev, &gphy->bbatt, &gphy->rfatt); if (cal) { list_add(&cal->list, &lo->calib_list); b43_lo_write(dev, &cal->ctl); @@ -1013,7 +1023,7 @@ void b43_lo_g_maintanance_work(struct b43_wldev *dev) void b43_lo_g_cleanup(struct b43_wldev *dev) { - struct b43_txpower_lo_control *lo = dev->phy.lo_control; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; struct b43_lo_calib *cal, *tmp; if (!lo) @@ -1027,9 +1037,7 @@ void b43_lo_g_cleanup(struct b43_wldev *dev) /* LO Initialization */ void b43_lo_g_init(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - - if (b43_has_hardware_pctl(phy)) { + if (b43_has_hardware_pctl(dev)) { lo_read_power_vector(dev); b43_gphy_dc_lt_init(dev, 1); } diff --git a/drivers/net/wireless/b43/lo.h b/drivers/net/wireless/b43/lo.h index 1da321cabc12..3b27e20eff80 100644 --- a/drivers/net/wireless/b43/lo.h +++ b/drivers/net/wireless/b43/lo.h @@ -1,7 +1,9 @@ #ifndef B43_LO_H_ #define B43_LO_H_ -#include "phy.h" +/* G-PHY Local Oscillator */ + +#include "phy_g.h" struct b43_wldev; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 7205a936ec74..14c44df584d0 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -44,8 +44,9 @@ #include "b43.h" #include "main.h" #include "debugfs.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_g.h" +#include "phy_n.h" #include "dma.h" #include "pio.h" #include "sysfs.h" @@ -814,7 +815,7 @@ void b43_dummy_transmission(struct b43_wldev *dev) break; udelay(10); } - for (i = 0x00; i < 0x0A; i++) { + for (i = 0x00; i < 0x19; i++) { value = b43_read16(dev, 0x0690); if (!(value & 0x0100)) break; @@ -1051,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags) } } -/* Turn the Analog ON/OFF */ -static void b43_switch_analog(struct b43_wldev *dev, int on) -{ - switch (dev->phy.type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); - break; - case B43_PHYTYPE_N: - b43_phy_write(dev, B43_NPHY_AFECTL_OVER, - on ? 0 : 0x7FFF); - break; - default: - B43_WARN_ON(1); - } -} - void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) { u32 tmslow; @@ -1090,8 +1074,12 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags) ssb_read32(dev->dev, SSB_TMSLOW); /* flush */ msleep(1); - /* Turn Analog ON */ - b43_switch_analog(dev, 1); + /* Turn Analog ON, but only if we already know the PHY-type. + * This protects against very early setup where we don't know the + * PHY-type, yet. wireless_core_reset will be called once again later, + * when we know the PHY-type. */ + if (dev->phy.ops) + dev->phy.ops->switch_analog(dev, 1); macctl = b43_read32(dev, B43_MMIO_MACCTL); macctl &= ~B43_MACCTL_GMODE; @@ -1174,6 +1162,8 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) { /* Top half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; if (dev->noisecalc.calculation_running) return; dev->noisecalc.calculation_running = 1; @@ -1184,7 +1174,7 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) static void handle_irq_noise(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *phy = dev->phy.g; u16 tmp; u8 noise[4]; u8 i, j; @@ -1192,6 +1182,9 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + if (dev->phy.type != B43_PHYTYPE_G) + return; + /* Possible race condition: It might be possible that the user * changed to a different channel in the meantime since we * started the calculation. We ignore that fact, since it's @@ -1251,13 +1244,13 @@ generate_new: static void handle_irq_tbtt_indication(struct b43_wldev *dev) { - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) { + if (b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) { ///TODO: PS TBTT } else { if (1 /*FIXME: the last PSpoll frame was sent successfully */ ) b43_power_saving_ctl_bits(dev, 0); } - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) dev->dfq_valid = 1; } @@ -1606,8 +1599,8 @@ static void handle_irq_beacon(struct b43_wldev *dev) struct b43_wl *wl = dev->wl; u32 cmd, beacon0_valid, beacon1_valid; - if (!b43_is_mode(wl, IEEE80211_IF_TYPE_AP) && - !b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && + !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) return; /* This is the bottom half of the asynchronous beacon update. */ @@ -2575,10 +2568,10 @@ static void b43_adjust_opmode(struct b43_wldev *dev) ctl &= ~B43_MACCTL_BEACPROMISC; ctl |= B43_MACCTL_INFRA; - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) ctl |= B43_MACCTL_AP; - else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) + else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) ctl &= ~B43_MACCTL_INFRA; if (wl->filter_flags & FIF_CONTROL) @@ -2688,9 +2681,8 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna) /* This is the opposite of b43_chip_init() */ static void b43_chip_exit(struct b43_wldev *dev) { - b43_radio_turn_off(dev, 1); + b43_phy_exit(dev); b43_gpio_cleanup(dev); - b43_lo_g_cleanup(dev); /* firmware is released later */ } @@ -2700,7 +2692,7 @@ static void b43_chip_exit(struct b43_wldev *dev) static int b43_chip_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err, tmp; + int err; u32 value32, macctl; u16 value16; @@ -2725,19 +2717,20 @@ static int b43_chip_init(struct b43_wldev *dev) err = b43_upload_initvals(dev); if (err) goto err_gpio_clean; - b43_radio_turn_on(dev); - b43_write16(dev, 0x03E6, 0x0000); + /* Turn the Analog on and initialize the PHY. */ + phy->ops->switch_analog(dev, 1); err = b43_phy_init(dev); if (err) - goto err_radio_off; + goto err_gpio_clean; - /* Select initial Interference Mitigation. */ - tmp = phy->interfmode; - phy->interfmode = B43_INTERFMODE_NONE; - b43_radio_set_interference_mitigation(dev, tmp); + /* Disable Interference Mitigation. */ + if (phy->ops->interf_mitigation) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); - b43_set_rx_antenna(dev, B43_ANTENNA_DEFAULT); + /* Select the antennae */ + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT); b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT); if (phy->type == B43_PHYTYPE_B) { @@ -2790,8 +2783,6 @@ static int b43_chip_init(struct b43_wldev *dev) out: return err; -err_radio_off: - b43_radio_turn_off(dev, 1); err_gpio_clean: b43_gpio_cleanup(dev); return err; @@ -2799,25 +2790,13 @@ err_gpio_clean: static void b43_periodic_every60sec(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = dev->phy.ops; - if (phy->type != B43_PHYTYPE_G) - return; - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) { - b43_mac_suspend(dev); - b43_calc_nrssi_slope(dev); - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { - u8 old_chan = phy->channel; - - /* VCO Calibration */ - if (old_chan >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - b43_radio_selectchannel(dev, old_chan, 0); - } - b43_mac_enable(dev); - } + if (ops->pwork_60sec) + ops->pwork_60sec(dev); + + /* Force check the TX power emission now. */ + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME); } static void b43_periodic_every30sec(struct b43_wldev *dev) @@ -2845,32 +2824,8 @@ static void b43_periodic_every15sec(struct b43_wldev *dev) } } - if (phy->type == B43_PHYTYPE_G) { - //TODO: update_aci_moving_average - if (phy->aci_enable && phy->aci_wlan_automatic) { - b43_mac_suspend(dev); - if (!phy->aci_enable && 1 /*TODO: not scanning? */ ) { - if (0 /*TODO: bunch of conditions */ ) { - b43_radio_set_interference_mitigation - (dev, B43_INTERFMODE_MANUALWLAN); - } - } else if (1 /*TODO*/) { - /* - if ((aci_average > 1000) && !(b43_radio_aci_scan(dev))) { - b43_radio_set_interference_mitigation(dev, - B43_INTERFMODE_NONE); - } - */ - } - b43_mac_enable(dev); - } else if (phy->interfmode == B43_INTERFMODE_NONWLAN && - phy->rev == 1) { - //TODO: implement rev1 workaround - } - } - b43_phy_xmitpower(dev); //FIXME: unless scanning? - b43_lo_g_maintanance_work(dev); - //TODO for APHY (temperature?) + if (phy->ops->pwork_15sec) + phy->ops->pwork_15sec(dev); atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); wmb(); @@ -3104,36 +3059,31 @@ static void b43_qos_params_upload(struct b43_wldev *dev, } } -/* Update the QOS parameters in hardware. */ -static void b43_qos_update(struct b43_wldev *dev) +/* Mapping of mac80211 queue numbers to b43 QoS SHM offsets. */ +static const u16 b43_qos_shm_offsets[] = { + /* [mac80211-queue-nr] = SHM_OFFSET, */ + [0] = B43_QOS_VOICE, + [1] = B43_QOS_VIDEO, + [2] = B43_QOS_BESTEFFORT, + [3] = B43_QOS_BACKGROUND, +}; + +/* Update all QOS parameters in hardware. */ +static void b43_qos_upload_all(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; struct b43_qos_params *params; - unsigned long flags; unsigned int i; - /* Mapping of mac80211 queues to b43 SHM offsets. */ - static const u16 qos_shm_offsets[] = { - [0] = B43_QOS_VOICE, - [1] = B43_QOS_VIDEO, - [2] = B43_QOS_BESTEFFORT, - [3] = B43_QOS_BACKGROUND, - }; - BUILD_BUG_ON(ARRAY_SIZE(qos_shm_offsets) != ARRAY_SIZE(wl->qos_params)); + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); b43_mac_suspend(dev); - spin_lock_irqsave(&wl->irq_lock, flags); - for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); - if (params->need_hw_update) { - b43_qos_params_upload(dev, &(params->p), - qos_shm_offsets[i]); - params->need_hw_update = 0; - } + b43_qos_params_upload(dev, &(params->p), + b43_qos_shm_offsets[i]); } - - spin_unlock_irqrestore(&wl->irq_lock, flags); b43_mac_enable(dev); } @@ -3142,25 +3092,50 @@ static void b43_qos_clear(struct b43_wl *wl) struct b43_qos_params *params; unsigned int i; + /* Initialize QoS parameters to sane defaults. */ + + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); + for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) { params = &(wl->qos_params[i]); - memset(&(params->p), 0, sizeof(params->p)); - params->p.aifs = -1; - params->need_hw_update = 1; + switch (b43_qos_shm_offsets[i]) { + case B43_QOS_VOICE: + params->p.txop = 0; + params->p.aifs = 2; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x0001; + break; + case B43_QOS_VIDEO: + params->p.txop = 0; + params->p.aifs = 2; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x0001; + break; + case B43_QOS_BESTEFFORT: + params->p.txop = 0; + params->p.aifs = 3; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x03FF; + break; + case B43_QOS_BACKGROUND: + params->p.txop = 0; + params->p.aifs = 7; + params->p.cw_min = 0x0001; + params->p.cw_max = 0x03FF; + break; + default: + B43_WARN_ON(1); + } } } /* Initialize the core's QOS capabilities */ static void b43_qos_init(struct b43_wldev *dev) { - struct b43_wl *wl = dev->wl; - unsigned int i; - /* Upload the current QOS parameters. */ - for (i = 0; i < ARRAY_SIZE(wl->qos_params); i++) - wl->qos_params[i].need_hw_update = 1; - b43_qos_update(dev); + b43_qos_upload_all(dev); /* Enable QOS support. */ b43_hf_write(dev, b43_hf_read(dev) | B43_HF_EDCF); @@ -3169,25 +3144,13 @@ static void b43_qos_init(struct b43_wldev *dev) | B43_MMIO_IFSCTL_USE_EDCF); } -static void b43_qos_update_work(struct work_struct *work) -{ - struct b43_wl *wl = container_of(work, struct b43_wl, qos_update_work); - struct b43_wldev *dev; - - mutex_lock(&wl->mutex); - dev = wl->current_dev; - if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) - b43_qos_update(dev); - mutex_unlock(&wl->mutex); -} - static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, const struct ieee80211_tx_queue_params *params) { struct b43_wl *wl = hw_to_b43_wl(hw); - unsigned long flags; + struct b43_wldev *dev; unsigned int queue = (unsigned int)_queue; - struct b43_qos_params *p; + int err = -ENODEV; if (queue >= ARRAY_SIZE(wl->qos_params)) { /* Queue not available or don't support setting @@ -3195,16 +3158,25 @@ static int b43_op_conf_tx(struct ieee80211_hw *hw, u16 _queue, * confuse mac80211. */ return 0; } + BUILD_BUG_ON(ARRAY_SIZE(b43_qos_shm_offsets) != + ARRAY_SIZE(wl->qos_params)); - spin_lock_irqsave(&wl->irq_lock, flags); - p = &(wl->qos_params[queue]); - memcpy(&(p->p), params, sizeof(p->p)); - p->need_hw_update = 1; - spin_unlock_irqrestore(&wl->irq_lock, flags); + mutex_lock(&wl->mutex); + dev = wl->current_dev; + if (unlikely(!dev || (b43_status(dev) < B43_STAT_INITIALIZED))) + goto out_unlock; - queue_work(hw->workqueue, &wl->qos_update_work); + memcpy(&(wl->qos_params[queue].p), params, sizeof(*params)); + b43_mac_suspend(dev); + b43_qos_params_upload(dev, &(wl->qos_params[queue].p), + b43_qos_shm_offsets[queue]); + b43_mac_enable(dev); + err = 0; - return 0; +out_unlock: + mutex_unlock(&wl->mutex); + + return err; } static int b43_op_get_tx_stats(struct ieee80211_hw *hw, @@ -3401,7 +3373,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Switch to the requested channel. * The firmware takes care of races with the TX handler. */ if (conf->channel->hw_value != phy->channel) - b43_radio_selectchannel(dev, conf->channel->hw_value, 0); + b43_switch_channel(dev, conf->channel->hw_value); /* Enable/Disable ShortSlot timing. */ if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)) != @@ -3417,26 +3389,30 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) /* Adjust the desired TX power level. */ if (conf->power_level != 0) { - if (conf->power_level != phy->power_level) { - phy->power_level = conf->power_level; - b43_phy_xmitpower(dev); + spin_lock_irqsave(&wl->irq_lock, flags); + if (conf->power_level != phy->desired_txpower) { + phy->desired_txpower = conf->power_level; + b43_phy_txpower_check(dev, B43_TXPWR_IGNORE_TIME | + B43_TXPWR_IGNORE_TSSI); } + spin_unlock_irqrestore(&wl->irq_lock, flags); } /* Antennas for RX and management frame TX. */ antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx); b43_mgmtframe_txantenna(dev, antenna); antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx); - b43_set_rx_antenna(dev, antenna); + if (phy->ops->set_rx_antenna) + phy->ops->set_rx_antenna(dev, antenna); /* Update templates for AP/mesh mode. */ - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) b43_set_beacon_int(dev, conf->beacon_int); if (!!conf->radio_enabled != phy->radio_on) { if (conf->radio_enabled) { - b43_radio_turn_on(dev); + b43_software_rfkill(dev, RFKILL_STATE_UNBLOCKED); b43info(dev->wl, "Radio turned on by software\n"); if (!dev->radio_hw_enable) { b43info(dev->wl, "The hardware RF-kill button " @@ -3444,7 +3420,7 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) "Press the button to turn it on.\n"); } } else { - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); b43info(dev->wl, "Radio turned off by software\n"); } } @@ -3619,14 +3595,14 @@ static int b43_op_config_interface(struct ieee80211_hw *hw, else memset(wl->bssid, 0, ETH_ALEN); if (b43_status(dev) >= B43_STAT_INITIALIZED) { - if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP) || - b43_is_mode(wl, IEEE80211_IF_TYPE_MESH_POINT)) { + if (b43_is_mode(wl, NL80211_IFTYPE_AP) || + b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) { B43_WARN_ON(vif->type != wl->if_type); if (conf->changed & IEEE80211_IFCC_SSID) b43_set_ssid(dev, conf->ssid, conf->ssid_len); if (conf->changed & IEEE80211_IFCC_BEACON) b43_update_templates(wl); - } else if (b43_is_mode(wl, IEEE80211_IF_TYPE_IBSS)) { + } else if (b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) { if (conf->changed & IEEE80211_IFCC_BEACON) b43_update_templates(wl); } @@ -3818,48 +3794,10 @@ static int b43_phy_versioning(struct b43_wldev *dev) static void setup_struct_phy_for_init(struct b43_wldev *dev, struct b43_phy *phy) { - struct b43_txpower_lo_control *lo; - int i; - - memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig)); - memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos)); - - phy->aci_enable = 0; - phy->aci_wlan_automatic = 0; - phy->aci_hw_rssi = 0; - - phy->radio_off_context.valid = 0; - - lo = phy->lo_control; - if (lo) { - memset(lo, 0, sizeof(*(phy->lo_control))); - lo->tx_bias = 0xFF; - INIT_LIST_HEAD(&lo->calib_list); - } - phy->max_lb_gain = 0; - phy->trsw_rx_gain = 0; - phy->txpwr_offset = 0; - - /* NRSSI */ - phy->nrssislope = 0; - for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++) - phy->nrssi[i] = -1000; - for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++) - phy->nrssi_lt[i] = i; - - phy->lofcal = 0xFFFF; - phy->initval = 0xFFFF; - - phy->interfmode = B43_INTERFMODE_NONE; - phy->channel = 0xFF; - phy->hardware_power_control = !!modparam_hwpctl; - + phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); - - /* OFDM-table address caching. */ - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; } static void setup_struct_wldev_for_init(struct b43_wldev *dev) @@ -3965,7 +3903,7 @@ static void b43_set_synth_pu_delay(struct b43_wldev *dev, bool idle) pu_delay = 3700; else pu_delay = 1050; - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS) || idle) + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC) || idle) pu_delay = 500; if ((dev->phy.radio_ver == 0x2050) && (dev->phy.radio_rev == 8)) pu_delay = max(pu_delay, (u16)2400); @@ -3979,7 +3917,7 @@ static void b43_set_pretbtt(struct b43_wldev *dev) u16 pretbtt; /* The time value is in microseconds. */ - if (b43_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS)) { + if (b43_is_mode(dev->wl, NL80211_IFTYPE_ADHOC)) { pretbtt = 2; } else { if (dev->phy.type == B43_PHYTYPE_A) @@ -3995,7 +3933,6 @@ static void b43_set_pretbtt(struct b43_wldev *dev) /* Locking: wl->mutex */ static void b43_wireless_core_exit(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; u32 macctl; B43_WARN_ON(b43_status(dev) > B43_STAT_INITIALIZED); @@ -4016,12 +3953,7 @@ static void b43_wireless_core_exit(struct b43_wldev *dev) b43_dma_free(dev); b43_pio_free(dev); b43_chip_exit(dev); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - kfree(phy->lo_control); - phy->lo_control = NULL; + dev->phy.ops->switch_analog(dev, 0); if (dev->wl->current_beacon) { dev_kfree_skb_any(dev->wl->current_beacon); dev->wl->current_beacon = NULL; @@ -4052,29 +3984,23 @@ static int b43_wireless_core_init(struct b43_wldev *dev) b43_wireless_core_reset(dev, tmp); } - if ((phy->type == B43_PHYTYPE_B) || (phy->type == B43_PHYTYPE_G)) { - phy->lo_control = - kzalloc(sizeof(*(phy->lo_control)), GFP_KERNEL); - if (!phy->lo_control) { - err = -ENOMEM; - goto err_busdown; - } - } + /* Reset all data structures. */ setup_struct_wldev_for_init(dev); - - err = b43_phy_init_tssi2dbm_table(dev); - if (err) - goto err_kfree_lo_control; + phy->ops->prepare_structs(dev); /* Enable IRQ routing to this device. */ ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev); b43_imcfglo_timeouts_workaround(dev); b43_bluetooth_coext_disable(dev); - b43_phy_early_init(dev); + if (phy->ops->prepare_hardware) { + err = phy->ops->prepare_hardware(dev); + if (err) + goto err_busdown; + } err = b43_chip_init(dev); if (err) - goto err_kfree_tssitbl; + goto err_busdown; b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_WLCOREREV, dev->dev->id.revision); hf = b43_hf_read(dev); @@ -4140,15 +4066,9 @@ static int b43_wireless_core_init(struct b43_wldev *dev) out: return err; - err_chip_exit: +err_chip_exit: b43_chip_exit(dev); - err_kfree_tssitbl: - if (phy->dyn_tssi_tbl) - kfree(phy->tssi2dbm); - err_kfree_lo_control: - kfree(phy->lo_control); - phy->lo_control = NULL; - err_busdown: +err_busdown: ssb_bus_may_powerdown(bus); B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT); return err; @@ -4164,11 +4084,11 @@ static int b43_op_add_interface(struct ieee80211_hw *hw, /* TODO: allow WDS/AP devices to coexist */ - if (conf->type != IEEE80211_IF_TYPE_AP && - conf->type != IEEE80211_IF_TYPE_MESH_POINT && - conf->type != IEEE80211_IF_TYPE_STA && - conf->type != IEEE80211_IF_TYPE_WDS && - conf->type != IEEE80211_IF_TYPE_IBSS) + if (conf->type != NL80211_IFTYPE_AP && + conf->type != NL80211_IFTYPE_MESH_POINT && + conf->type != NL80211_IFTYPE_STATION && + conf->type != NL80211_IFTYPE_WDS && + conf->type != NL80211_IFTYPE_ADHOC) return -EOPNOTSUPP; mutex_lock(&wl->mutex); @@ -4283,7 +4203,6 @@ static void b43_op_stop(struct ieee80211_hw *hw) struct b43_wldev *dev = wl->current_dev; b43_rfkill_exit(dev); - cancel_work_sync(&(wl->qos_update_work)); cancel_work_sync(&(wl->beacon_update_trigger)); mutex_lock(&wl->mutex); @@ -4291,6 +4210,8 @@ static void b43_op_stop(struct ieee80211_hw *hw) b43_wireless_core_stop(dev); b43_wireless_core_exit(dev); mutex_unlock(&wl->mutex); + + cancel_work_sync(&(wl->txpower_adjust_work)); } static int b43_op_set_retry_limit(struct ieee80211_hw *hw, @@ -4313,7 +4234,8 @@ out_unlock: return err; } -static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set) +static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, bool set) { struct b43_wl *wl = hw_to_b43_wl(hw); unsigned long flags; @@ -4328,7 +4250,7 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, int aid, int set) static void b43_op_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd notify_cmd, - const u8 *addr) + struct ieee80211_sta *sta) { struct b43_wl *wl = hw_to_b43_wl(hw); @@ -4422,6 +4344,7 @@ static void b43_wireless_core_detach(struct b43_wldev *dev) /* We release firmware that late to not be required to re-request * is all the time when we reinit the core. */ b43_release_firmware(dev); + b43_phy_free(dev); } static int b43_wireless_core_attach(struct b43_wldev *dev) @@ -4495,30 +4418,35 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) } } + err = b43_phy_allocate(dev); + if (err) + goto err_powerdown; + dev->phy.gmode = have_2ghz_phy; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); err = b43_validate_chipaccess(dev); if (err) - goto err_powerdown; + goto err_phy_free; err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy); if (err) - goto err_powerdown; + goto err_phy_free; /* Now set some default "current_dev" */ if (!wl->current_dev) wl->current_dev = dev; INIT_WORK(&dev->restart_work, b43_chip_reset); - b43_radio_turn_off(dev, 1); - b43_switch_analog(dev, 0); + dev->phy.ops->switch_analog(dev, 0); ssb_device_disable(dev->dev, 0); ssb_bus_may_powerdown(bus); out: return err; +err_phy_free: + b43_phy_free(dev); err_powerdown: ssb_bus_may_powerdown(bus); return err; @@ -4615,9 +4543,11 @@ static void b43_sprom_fixup(struct ssb_bus *bus) pdev = bus->host_pci; if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) || IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) || + IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) || IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) || - IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013)) + IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) || + IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010)) bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST; } } @@ -4650,7 +4580,15 @@ static int b43_wireless_init(struct ssb_device *dev) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_AP) | + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); + hw->queues = b43_modparam_qos ? 4 : 1; + hw->max_altrates = 1; SET_IEEE80211_DEV(hw, dev->dev); if (is_valid_ether_addr(sprom->et1mac)) SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac); @@ -4667,8 +4605,8 @@ static int b43_wireless_init(struct ssb_device *dev) spin_lock_init(&wl->shm_lock); mutex_init(&wl->mutex); INIT_LIST_HEAD(&wl->devlist); - INIT_WORK(&wl->qos_update_work, b43_qos_update_work); INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work); + INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work); ssb_set_devtypedata(dev, wl); b43info(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id); diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index b8aa16307f79..3cfc30307a27 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -82,13 +82,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) tuple.TupleOffset = 0; res = pcmcia_get_first_tuple(dev, &tuple); - if (res != CS_SUCCESS) + if (res != 0) goto err_kfree_ssb; res = pcmcia_get_tuple_data(dev, &tuple); - if (res != CS_SUCCESS) + if (res != 0) goto err_kfree_ssb; - res = pcmcia_parse_tuple(dev, &tuple, &parse); - if (res != CS_SUCCESS) + res = pcmcia_parse_tuple(&tuple, &parse); + if (res != 0) goto err_kfree_ssb; dev->conf.ConfigBase = parse.config.base; @@ -107,13 +107,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) win.Size = SSB_CORE_SIZE; win.AccessSpeed = 250; res = pcmcia_request_window(&dev, &win, &dev->win); - if (res != CS_SUCCESS) + if (res != 0) goto err_kfree_ssb; mem.CardOffset = 0; mem.Page = 0; res = pcmcia_map_mem_page(dev->win, &mem); - if (res != CS_SUCCESS) + if (res != 0) goto err_disable; dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; @@ -121,11 +121,11 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->irq.Handler = NULL; /* The handler is registered later. */ dev->irq.Instance = NULL; res = pcmcia_request_irq(dev, &dev->irq); - if (res != CS_SUCCESS) + if (res != 0) goto err_disable; res = pcmcia_request_configuration(dev, &dev->conf); - if (res != CS_SUCCESS) + if (res != 0) goto err_disable; err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); diff --git a/drivers/net/wireless/b43/phy.h b/drivers/net/wireless/b43/phy.h deleted file mode 100644 index 4aab10903529..000000000000 --- a/drivers/net/wireless/b43/phy.h +++ /dev/null @@ -1,340 +0,0 @@ -#ifndef B43_PHY_H_ -#define B43_PHY_H_ - -#include <linux/types.h> - -struct b43_wldev; -struct b43_phy; - -/*** PHY Registers ***/ - -/* Routing */ -#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ -#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ -#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ -#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ -#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ - -/* CCK (B-PHY) registers. */ -#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) -/* N-PHY registers. */ -#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) -/* N-PHY BMODE registers. */ -#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) -/* OFDM (A-PHY) registers. */ -#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) -/* Extended G-PHY registers. */ -#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) - -/* OFDM (A) PHY Registers */ -#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ -#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ -#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ -#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 -#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ -#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ -#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ -#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ -#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ -#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) -#define B43_PHY_CRS0_EN 0x4000 -#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) -#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ -#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ -#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ -#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ -#define B43_PHY_LMS B43_PHY_OFDM(0x55) -#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ -#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ -#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ -#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ -#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ -#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ -#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ -#define B43_PHY_OTABLENR_SHIFT 10 -#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ -#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ -#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ -#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ -#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) -#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ -#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ -#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ -#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ -#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ -#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ -#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) -#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) -#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) -#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) -#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) -#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ -#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ -#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ -#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) -#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) -#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) -#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ -#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ -#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ -#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ -#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ -#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ -#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ - -/* CCK (B) PHY Registers */ -#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ -#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ -#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ -#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ -#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ -#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 -#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ -#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ -#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ -#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ -#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) -#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ -#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ -#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ - -/* Extended G-PHY Registers */ -#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ -#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ -#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ -#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ -#define B43_PHY_GTABNR_SHIFT 10 -#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ -#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ -#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ -#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ -#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ -#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 -#define B43_PHY_RFOVERVAL_LNA 0x7000 -#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 -#define B43_PHY_RFOVERVAL_PGA 0x0F00 -#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 -#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ -#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 -#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ -#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ -#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ -#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ -#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ - -/*** OFDM table numbers ***/ -#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) -#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) -#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) -#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename -#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) -#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) -#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) -#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) -#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) -#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) -#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) -#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) -#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) -#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) -#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) -#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) -#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) -#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) -#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename -#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename -#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) -#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) -#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename -#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) -#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! -#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) -#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) -#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) -#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) -#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) -#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) -#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) - -u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); -void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, - u16 offset, u16 value); -u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); -void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, - u16 offset, u32 value); - -/*** G-PHY table numbers */ -#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) -#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) -#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) -#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) - -u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); //TODO implement -void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); //TODO implement - -#define B43_DEFAULT_CHANNEL_A 36 -#define B43_DEFAULT_CHANNEL_BG 6 - -enum { - B43_ANTENNA0, /* Antenna 0 */ - B43_ANTENNA1, /* Antenna 0 */ - B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ - B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ - B43_ANTENNA2, - B43_ANTENNA3 = 8, - - B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, - B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, -}; - -enum { - B43_INTERFMODE_NONE, - B43_INTERFMODE_NONWLAN, - B43_INTERFMODE_MANUALWLAN, - B43_INTERFMODE_AUTOWLAN, -}; - -/* Masks for the different PHY versioning registers. */ -#define B43_PHYVER_ANALOG 0xF000 -#define B43_PHYVER_ANALOG_SHIFT 12 -#define B43_PHYVER_TYPE 0x0F00 -#define B43_PHYVER_TYPE_SHIFT 8 -#define B43_PHYVER_VERSION 0x00FF - -void b43_phy_lock(struct b43_wldev *dev); -void b43_phy_unlock(struct b43_wldev *dev); - - -/* Read a value from a PHY register */ -u16 b43_phy_read(struct b43_wldev *dev, u16 offset); -/* Write a value to a PHY register */ -void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val); -/* Mask a PHY register with a mask */ -void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); -/* OR a PHY register with a bitmap */ -void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); -/* Mask and OR a PHY register with a mask and bitmap */ -void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); - - -int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev); - -void b43_phy_early_init(struct b43_wldev *dev); -int b43_phy_init(struct b43_wldev *dev); - -void b43_set_rx_antenna(struct b43_wldev *dev, int antenna); - -void b43_phy_xmitpower(struct b43_wldev *dev); - -/* Returns the boolean whether the board has HardwarePowerControl */ -bool b43_has_hardware_pctl(struct b43_phy *phy); -/* Returns the boolean whether "TX Magnification" is enabled. */ -#define has_tx_magnification(phy) \ - (((phy)->rev >= 2) && \ - ((phy)->radio_ver == 0x2050) && \ - ((phy)->radio_rev == 8)) -/* Card uses the loopback gain stuff */ -#define has_loopback_gain(phy) \ - (((phy)->rev > 1) || ((phy)->gmode)) - -/* Radio Attenuation (RF Attenuation) */ -struct b43_rfatt { - u8 att; /* Attenuation value */ - bool with_padmix; /* Flag, PAD Mixer enabled. */ -}; -struct b43_rfatt_list { - /* Attenuation values list */ - const struct b43_rfatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_rfatt(const struct b43_rfatt *a, - const struct b43_rfatt *b) -{ - return ((a->att == b->att) && - (a->with_padmix == b->with_padmix)); -} - -/* Baseband Attenuation */ -struct b43_bbatt { - u8 att; /* Attenuation value */ -}; -struct b43_bbatt_list { - /* Attenuation values list */ - const struct b43_bbatt *list; - u8 len; - /* Minimum/Maximum attenuation values */ - u8 min_val; - u8 max_val; -}; - -/* Returns true, if the values are the same. */ -static inline bool b43_compare_bbatt(const struct b43_bbatt *a, - const struct b43_bbatt *b) -{ - return (a->att == b->att); -} - -/* tx_control bits. */ -#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ -#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ -#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ - -/* Write BasebandAttenuation value to the device. */ -void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation); - -extern const u8 b43_radio_channel_codes_bg[]; - -void b43_radio_lock(struct b43_wldev *dev); -void b43_radio_unlock(struct b43_wldev *dev); - - -/* Read a value from a 16bit radio register */ -u16 b43_radio_read16(struct b43_wldev *dev, u16 offset); -/* Write a value to a 16bit radio register */ -void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val); -/* Mask a 16bit radio register with a mask */ -void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); -/* OR a 16bit radio register with a bitmap */ -void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); -/* Mask and OR a PHY register with a mask and bitmap */ -void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); - - -u16 b43_radio_init2050(struct b43_wldev *dev); -void b43_radio_init2060(struct b43_wldev *dev); - -void b43_radio_turn_on(struct b43_wldev *dev); -void b43_radio_turn_off(struct b43_wldev *dev, bool force); - -int b43_radio_selectchannel(struct b43_wldev *dev, u8 channel, - int synthetic_pu_workaround); - -u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel); -u8 b43_radio_aci_scan(struct b43_wldev *dev); - -int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode); - -void b43_calc_nrssi_slope(struct b43_wldev *dev); -void b43_calc_nrssi_threshold(struct b43_wldev *dev); -s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset); -void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val); -void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val); -void b43_nrssi_mem_update(struct b43_wldev *dev); - -void b43_radio_set_tx_iq(struct b43_wldev *dev); -u16 b43_radio_calibrationvalue(struct b43_wldev *dev); - -void b43_put_attenuation_into_ranges(struct b43_wldev *dev, - int *_bbatt, int *_rfatt); - -void b43_set_txpower_g(struct b43_wldev *dev, - const struct b43_bbatt *bbatt, - const struct b43_rfatt *rfatt, u8 tx_control); - -#endif /* B43_PHY_H_ */ diff --git a/drivers/net/wireless/b43/phy_a.c b/drivers/net/wireless/b43/phy_a.c new file mode 100644 index 000000000000..0f1a84c9de61 --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.c @@ -0,0 +1,643 @@ +/* + + Broadcom B43 wireless driver + IEEE 802.11a PHY driver + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "phy_a.h" +#include "phy_common.h" +#include "wa.h" +#include "tables.h" +#include "main.h" + + +/* Get the freq, as it has to be written to the device. */ +static inline u16 channel2freq_a(u8 channel) +{ + B43_WARN_ON(channel > 200); + + return (5000 + 5 * channel); +} + +static inline u16 freq_r3A_value(u16 frequency) +{ + u16 value; + + if (frequency < 5091) + value = 0x0040; + else if (frequency < 5321) + value = 0x0000; + else if (frequency < 5806) + value = 0x0080; + else + value = 0x0040; + + return value; +} + +#if 0 +/* This function converts a TSSI value to dBm in Q5.2 */ +static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + s8 dbm = 0; + s32 tmp; + + tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi); + tmp += 0x80; + tmp = clamp_val(tmp, 0x00, 0xFF); + dbm = aphy->tssi2dbm[tmp]; + //TODO: There's a FIXME on the specs + + return dbm; +} +#endif + +void b43_radio_set_tx_iq(struct b43_wldev *dev) +{ + static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; + static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; + u16 tmp = b43_radio_read16(dev, 0x001E); + int i, j; + + for (i = 0; i < 5; i++) { + for (j = 0; j < 5; j++) { + if (tmp == (data_high[i] << 4 | data_low[j])) { + b43_phy_write(dev, 0x0069, + (i - j) << 8 | 0x00C0); + return; + } + } + } +} + +static void aphy_channel_switch(struct b43_wldev *dev, unsigned int channel) +{ + u16 freq, r8, tmp; + + freq = channel2freq_a(channel); + + r8 = b43_radio_read16(dev, 0x0008); + b43_write16(dev, 0x03F0, freq); + b43_radio_write16(dev, 0x0008, r8); + + //TODO: write max channel TX power? to Radio 0x2D + tmp = b43_radio_read16(dev, 0x002E); + tmp &= 0x0080; + //TODO: OR tmp with the Power out estimation for this channel? + b43_radio_write16(dev, 0x002E, tmp); + + if (freq >= 4920 && freq <= 5500) { + /* + * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; + * = (freq * 0.025862069 + */ + r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ + } + b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); + b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022) + & 0x000F) | (r8 << 4)); + b43_radio_write16(dev, 0x002A, (r8 << 4)); + b43_radio_write16(dev, 0x002B, (r8 << 4)); + b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008) + & 0x00F0) | (r8 << 4)); + b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029) + & 0xFF0F) | 0x00B0); + b43_radio_write16(dev, 0x0035, 0x00AA); + b43_radio_write16(dev, 0x0036, 0x0085); + b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A) + & 0xFF20) | + freq_r3A_value(freq)); + b43_radio_write16(dev, 0x003D, + b43_radio_read16(dev, 0x003D) & 0x00FF); + b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081) + & 0xFF7F) | 0x0080); + b43_radio_write16(dev, 0x0035, + b43_radio_read16(dev, 0x0035) & 0xFFEF); + b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035) + & 0xFFEF) | 0x0010); + b43_radio_set_tx_iq(dev); + //TODO: TSSI2dbm workaround +//FIXME b43_phy_xmitpower(dev); +} + +void b43_radio_init2060(struct b43_wldev *dev) +{ + b43_radio_write16(dev, 0x0004, 0x00C0); + b43_radio_write16(dev, 0x0005, 0x0008); + b43_radio_write16(dev, 0x0009, 0x0040); + b43_radio_write16(dev, 0x0005, 0x00AA); + b43_radio_write16(dev, 0x0032, 0x008F); + b43_radio_write16(dev, 0x0006, 0x008F); + b43_radio_write16(dev, 0x0034, 0x008F); + b43_radio_write16(dev, 0x002C, 0x0007); + b43_radio_write16(dev, 0x0082, 0x0080); + b43_radio_write16(dev, 0x0080, 0x0000); + b43_radio_write16(dev, 0x003F, 0x00DA); + b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); + msleep(1); /* delay 400usec */ + + b43_radio_write16(dev, 0x0081, + (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010); + msleep(1); /* delay 400usec */ + + b43_radio_write16(dev, 0x0005, + (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008); + b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010); + b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); + b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040); + b43_radio_write16(dev, 0x0081, + (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040); + b43_radio_write16(dev, 0x0005, + (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); + b43_phy_write(dev, 0x0063, 0xDDC6); + b43_phy_write(dev, 0x0069, 0x07BE); + b43_phy_write(dev, 0x006A, 0x0000); + + aphy_channel_switch(dev, dev->phy.ops->get_default_chan(dev)); + + msleep(1); +} + +static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) +{ + int i; + + if (dev->phy.rev < 3) { + if (enable) + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { + b43_ofdmtab_write16(dev, + B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, 0xFFF8); + } + else + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { + b43_ofdmtab_write16(dev, + B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); + } + } else { + if (enable) + for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, 0x0820); + else + for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) + b43_ofdmtab_write16(dev, + B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); + } +} + +static void b43_phy_ww(struct b43_wldev *dev) +{ + u16 b, curr_s, best_s = 0xFFFF; + int i; + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN); + b43_phy_write(dev, B43_PHY_OFDM(0x1B), + b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000); + b43_phy_write(dev, B43_PHY_OFDM(0x82), + (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300); + b43_radio_write16(dev, 0x0009, + b43_radio_read16(dev, 0x0009) | 0x0080); + b43_radio_write16(dev, 0x0012, + (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002); + b43_wa_initgains(dev); + b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); + b = b43_phy_read(dev, B43_PHY_PWRDOWN); + b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); + b43_radio_write16(dev, 0x0004, + b43_radio_read16(dev, 0x0004) | 0x0004); + for (i = 0x10; i <= 0x20; i++) { + b43_radio_write16(dev, 0x0013, i); + curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; + if (!curr_s) { + best_s = 0x0000; + break; + } else if (curr_s >= 0x0080) + curr_s = 0x0100 - curr_s; + if (curr_s < best_s) + best_s = curr_s; + } + b43_phy_write(dev, B43_PHY_PWRDOWN, b); + b43_radio_write16(dev, 0x0004, + b43_radio_read16(dev, 0x0004) & 0xFFFB); + b43_radio_write16(dev, 0x0013, best_s); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); + b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); + b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); + b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); + b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); + b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); + b43_phy_write(dev, B43_PHY_OFDM(0xBB), + (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053); + b43_phy_write(dev, B43_PHY_OFDM61, + (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120); + b43_phy_write(dev, B43_PHY_OFDM(0x13), + (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000); + b43_phy_write(dev, B43_PHY_OFDM(0x14), + (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); + for (i = 0; i < 6; i++) + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); + b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); + b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); +} + +static void hardware_pctl_init_aphy(struct b43_wldev *dev) +{ + //TODO +} + +void b43_phy_inita(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + + /* This lowlevel A-PHY init is also called from G-PHY init. + * So we must not access phy->a, if called from G-PHY code. + */ + B43_WARN_ON((phy->type != B43_PHYTYPE_A) && + (phy->type != B43_PHYTYPE_G)); + + might_sleep(); + + if (phy->rev >= 6) { + if (phy->type == B43_PHYTYPE_A) + b43_phy_write(dev, B43_PHY_OFDM(0x1B), + b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000); + if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) + b43_phy_write(dev, B43_PHY_ENCORE, + b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010); + else + b43_phy_write(dev, B43_PHY_ENCORE, + b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010); + } + + b43_wa_all(dev); + + if (phy->type == B43_PHYTYPE_A) { + if (phy->gmode && (phy->rev < 3)) + b43_phy_write(dev, 0x0034, + b43_phy_read(dev, 0x0034) | 0x0001); + b43_phy_rssiagc(dev, 0); + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); + + b43_radio_init2060(dev); + + if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + ((bus->boardinfo.type == SSB_BOARD_BU4306) || + (bus->boardinfo.type == SSB_BOARD_BU4309))) { + ; //TODO: A PHY LO + } + + if (phy->rev >= 3) + b43_phy_ww(dev); + + hardware_pctl_init_aphy(dev); + + //TODO: radar detection + } + + if ((phy->type == B43_PHYTYPE_G) && + (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { + b43_phy_write(dev, B43_PHY_OFDM(0x6E), + (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) + & 0xE000) | 0x3CF); + } +} + +/* Initialise the TSSI->dBm lookup table */ +static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + s16 pab0, pab1, pab2; + + pab0 = (s16) (dev->dev->bus->sprom.pa1b0); + pab1 = (s16) (dev->dev->bus->sprom.pa1b1); + pab2 = (s16) (dev->dev->bus->sprom.pa1b2); + + if (pab0 != 0 && pab1 != 0 && pab2 != 0 && + pab0 != -1 && pab1 != -1 && pab2 != -1) { + /* The pabX values are set in SPROM. Use them. */ + if ((s8) dev->dev->bus->sprom.itssi_a != 0 && + (s8) dev->dev->bus->sprom.itssi_a != -1) + aphy->tgt_idle_tssi = + (s8) (dev->dev->bus->sprom.itssi_a); + else + aphy->tgt_idle_tssi = 62; + aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, + pab1, pab2); + if (!aphy->tssi2dbm) + return -ENOMEM; + } else { + /* pabX values not set in SPROM, + * but APHY needs a generated table. */ + aphy->tssi2dbm = NULL; + b43err(dev->wl, "Could not generate tssi2dBm " + "table (wrong SPROM info)!\n"); + return -ENODEV; + } + + return 0; +} + +static int b43_aphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_a *aphy; + int err; + + aphy = kzalloc(sizeof(*aphy), GFP_KERNEL); + if (!aphy) + return -ENOMEM; + dev->phy.a = aphy; + + err = b43_aphy_init_tssi2dbm_table(dev); + if (err) + goto err_free_aphy; + + return 0; + +err_free_aphy: + kfree(aphy); + dev->phy.a = NULL; + + return err; +} + +static void b43_aphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + const void *tssi2dbm; + int tgt_idle_tssi; + + /* tssi2dbm table is constant, so it is initialized at alloc time. + * Save a copy of the pointer. */ + tssi2dbm = aphy->tssi2dbm; + tgt_idle_tssi = aphy->tgt_idle_tssi; + + /* Zero out the whole PHY structure. */ + memset(aphy, 0, sizeof(*aphy)); + + aphy->tssi2dbm = tssi2dbm; + aphy->tgt_idle_tssi = tgt_idle_tssi; + + //TODO init struct b43_phy_a + +} + +static void b43_aphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_a *aphy = phy->a; + + kfree(aphy->tssi2dbm); + aphy->tssi2dbm = NULL; + + kfree(aphy); + dev->phy.a = NULL; +} + +static int b43_aphy_op_init(struct b43_wldev *dev) +{ + b43_phy_inita(dev); + + return 0; +} + +static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset) +{ + /* OFDM registers are base-registers for the A-PHY. */ + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { + offset &= ~B43_PHYROUTE; + offset |= B43_PHYROUTE_BASE; + } + +#if B43_DEBUG + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { + /* Ext-G registers are only available on G-PHYs */ + b43err(dev->wl, "Invalid EXT-G PHY access at " + "0x%04X on A-PHY\n", offset); + dump_stack(); + } + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { + /* N-BMODE registers are only available on N-PHYs */ + b43err(dev->wl, "Invalid N-BMODE PHY access at " + "0x%04X on A-PHY\n", offset); + dump_stack(); + } +#endif /* B43_DEBUG */ + + return offset; +} + +static u16 b43_aphy_op_read(struct b43_wldev *dev, u16 reg) +{ + reg = adjust_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_aphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + reg = adjust_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_aphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* A-PHY needs 0x40 for read access */ + reg |= 0x40; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_aphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev) +{ + return (dev->phy.rev >= 5); +} + +static void b43_aphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + + if (state == RFKILL_STATE_UNBLOCKED) { + if (phy->radio_on) + return; + b43_radio_write16(dev, 0x0004, 0x00C0); + b43_radio_write16(dev, 0x0005, 0x0008); + b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7); + b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7); + b43_radio_init2060(dev); + } else { + b43_radio_write16(dev, 0x0004, 0x00FF); + b43_radio_write16(dev, 0x0005, 0x00FB); + b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008); + b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008); + } +} + +static int b43_aphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if (new_channel > 200) + return -EINVAL; + aphy_channel_switch(dev, new_channel); + + return 0; +} + +static unsigned int b43_aphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 36; /* Default to channel 36 */ +} + +static void b43_aphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{//TODO + struct b43_phy *phy = &dev->phy; + u64 hf; + u16 tmp; + int autodiv = 0; + + if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) + autodiv = 1; + + hf = b43_hf_read(dev); + hf &= ~B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); + + tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); + tmp &= ~B43_PHY_BBANDCFG_RXANT; + tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) + << B43_PHY_BBANDCFG_RXANT_SHIFT; + b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); + + if (autodiv) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + if (antenna == B43_ANTENNA_AUTO0) + tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; + else + tmp |= B43_PHY_ANTDWELL_AUTODIV1; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } + if (phy->rev < 3) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + tmp = (tmp & 0xFF00) | 0x24; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } else { + tmp = b43_phy_read(dev, B43_PHY_OFDM61); + tmp |= 0x10; + b43_phy_write(dev, B43_PHY_OFDM61, tmp); + if (phy->analog == 3) { + b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, + 0x1D); + b43_phy_write(dev, B43_PHY_ADIVRELATED, + 8); + } else { + b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, + 0x3A); + tmp = + b43_phy_read(dev, + B43_PHY_ADIVRELATED); + tmp = (tmp & 0xFF00) | 8; + b43_phy_write(dev, B43_PHY_ADIVRELATED, + tmp); + } + } + + hf |= B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); +} + +static void b43_aphy_op_adjust_txpower(struct b43_wldev *dev) +{//TODO +} + +static enum b43_txpwr_result b43_aphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + +static void b43_aphy_op_pwork_15sec(struct b43_wldev *dev) +{//TODO +} + +static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev) +{//TODO +} + +const struct b43_phy_operations b43_phyops_a = { + .allocate = b43_aphy_op_allocate, + .free = b43_aphy_op_free, + .prepare_structs = b43_aphy_op_prepare_structs, + .init = b43_aphy_op_init, + .phy_read = b43_aphy_op_read, + .phy_write = b43_aphy_op_write, + .radio_read = b43_aphy_op_radio_read, + .radio_write = b43_aphy_op_radio_write, + .supports_hwpctl = b43_aphy_op_supports_hwpctl, + .software_rfkill = b43_aphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_aphy_op_switch_channel, + .get_default_chan = b43_aphy_op_get_default_chan, + .set_rx_antenna = b43_aphy_op_set_rx_antenna, + .recalc_txpower = b43_aphy_op_recalc_txpower, + .adjust_txpower = b43_aphy_op_adjust_txpower, + .pwork_15sec = b43_aphy_op_pwork_15sec, + .pwork_60sec = b43_aphy_op_pwork_60sec, +}; diff --git a/drivers/net/wireless/b43/phy_a.h b/drivers/net/wireless/b43/phy_a.h new file mode 100644 index 000000000000..5cfaab7b16ee --- /dev/null +++ b/drivers/net/wireless/b43/phy_a.h @@ -0,0 +1,130 @@ +#ifndef LINUX_B43_PHY_A_H_ +#define LINUX_B43_PHY_A_H_ + +#include "phy_common.h" + + +/* OFDM (A) PHY Registers */ +#define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ +#define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ +#define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ +#define B43_PHY_BBANDCFG_RXANT_SHIFT 7 +#define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ +#define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */ +#define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ +#define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */ +#define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ +#define B43_PHY_CRS0 B43_PHY_OFDM(0x29) +#define B43_PHY_CRS0_EN 0x4000 +#define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30) +#define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ +#define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ +#define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ +#define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ +#define B43_PHY_LMS B43_PHY_OFDM(0x55) +#define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ +#define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ +#define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ +#define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */ +#define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ +#define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ +#define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ +#define B43_PHY_OTABLENR_SHIFT 10 +#define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ +#define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ +#define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ +#define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */ +#define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B) +#define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */ +#define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ +#define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ +#define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ +#define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ +#define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ +#define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) +#define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) +#define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) +#define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) +#define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) +#define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */ +#define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */ +#define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ +#define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) +#define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) +#define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) +#define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ +#define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ +#define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */ +#define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */ +#define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ +#define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ +#define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ + +/*** OFDM table numbers ***/ +#define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) +#define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) +#define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename +#define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) +#define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) +#define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) +#define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) +#define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) +#define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) +#define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) +#define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) +#define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) +#define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) +#define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) +#define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) +#define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) +#define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename +#define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename +#define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) +#define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) +#define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename +#define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) +#define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove! +#define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0) +#define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) +#define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) +#define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) +#define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) +#define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) + +u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, + u16 offset, u16 value); +u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); +void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, + u16 offset, u32 value); + + +struct b43_phy_a { + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi;//FIXME value currently not set + + /* A-PHY TX Power control value. */ + u16 txpwr_offset; + + //TODO lots of missing stuff +}; + +/** + * b43_phy_inita - Lowlevel A-PHY init routine. + * This is _only_ used by the G-PHY code. + */ +void b43_phy_inita(struct b43_wldev *dev); + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_a; + +#endif /* LINUX_B43_PHY_A_H_ */ diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c new file mode 100644 index 000000000000..af37abccccb3 --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.c @@ -0,0 +1,381 @@ +/* + + Broadcom B43 wireless driver + Common PHY routines + + Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, + Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> + Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "phy_common.h" +#include "phy_g.h" +#include "phy_a.h" +#include "phy_n.h" +#include "phy_lp.h" +#include "b43.h" +#include "main.h" + + +int b43_phy_allocate(struct b43_wldev *dev) +{ + struct b43_phy *phy = &(dev->phy); + int err; + + phy->ops = NULL; + + switch (phy->type) { + case B43_PHYTYPE_A: + phy->ops = &b43_phyops_a; + break; + case B43_PHYTYPE_G: + phy->ops = &b43_phyops_g; + break; + case B43_PHYTYPE_N: +#ifdef CONFIG_B43_NPHY + phy->ops = &b43_phyops_n; +#endif + break; + case B43_PHYTYPE_LP: +#ifdef CONFIG_B43_PHY_LP + phy->ops = &b43_phyops_lp; +#endif + break; + } + if (B43_WARN_ON(!phy->ops)) + return -ENODEV; + + err = phy->ops->allocate(dev); + if (err) + phy->ops = NULL; + + return err; +} + +void b43_phy_free(struct b43_wldev *dev) +{ + dev->phy.ops->free(dev); + dev->phy.ops = NULL; +} + +int b43_phy_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + const struct b43_phy_operations *ops = phy->ops; + int err; + + phy->channel = ops->get_default_chan(dev); + + ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED); + err = ops->init(dev); + if (err) { + b43err(dev->wl, "PHY init failed\n"); + goto err_block_rf; + } + /* Make sure to switch hardware and firmware (SHM) to + * the default channel. */ + err = b43_switch_channel(dev, ops->get_default_chan(dev)); + if (err) { + b43err(dev->wl, "PHY init: Channel switch to default failed\n"); + goto err_phy_exit; + } + + return 0; + +err_phy_exit: + if (ops->exit) + ops->exit(dev); +err_block_rf: + ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + + return err; +} + +void b43_phy_exit(struct b43_wldev *dev) +{ + const struct b43_phy_operations *ops = dev->phy.ops; + + ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); + if (ops->exit) + ops->exit(dev); +} + +bool b43_has_hardware_pctl(struct b43_wldev *dev) +{ + if (!dev->phy.hardware_power_control) + return 0; + if (!dev->phy.ops->supports_hwpctl) + return 0; + return dev->phy.ops->supports_hwpctl(dev); +} + +void b43_radio_lock(struct b43_wldev *dev) +{ + u32 macctl; + + macctl = b43_read32(dev, B43_MMIO_MACCTL); + B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); + macctl |= B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); + /* Commit the write and wait for the device + * to exit any radio register access. */ + b43_read32(dev, B43_MMIO_MACCTL); + udelay(10); +} + +void b43_radio_unlock(struct b43_wldev *dev) +{ + u32 macctl; + + /* Commit any write */ + b43_read16(dev, B43_MMIO_PHY_VER); + /* unlock */ + macctl = b43_read32(dev, B43_MMIO_MACCTL); + B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); + macctl &= ~B43_MACCTL_RADIOLOCK; + b43_write32(dev, B43_MMIO_MACCTL, macctl); +} + +void b43_phy_lock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(dev->phy.phy_locked); + dev->phy.phy_locked = 1; +#endif + B43_WARN_ON(dev->dev->id.revision < 3); + + if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) + b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); +} + +void b43_phy_unlock(struct b43_wldev *dev) +{ +#if B43_DEBUG + B43_WARN_ON(!dev->phy.phy_locked); + dev->phy.phy_locked = 0; +#endif + B43_WARN_ON(dev->dev->id.revision < 3); + + if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP)) + b43_power_saving_ctl_bits(dev, 0); +} + +u16 b43_radio_read(struct b43_wldev *dev, u16 reg) +{ + return dev->phy.ops->radio_read(dev, reg); +} + +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + dev->phy.ops->radio_write(dev, reg, value); +} + +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) & mask); +} + +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_radio_write16(dev, offset, + b43_radio_read16(dev, offset) | set); +} + +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_radio_write16(dev, offset, + (b43_radio_read16(dev, offset) & mask) | set); +} + +u16 b43_phy_read(struct b43_wldev *dev, u16 reg) +{ + return dev->phy.ops->phy_read(dev, reg); +} + +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + dev->phy.ops->phy_write(dev, reg, value); +} + +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) +{ + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) & mask); +} + +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) +{ + b43_phy_write(dev, offset, + b43_phy_read(dev, offset) | set); +} + +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) +{ + b43_phy_write(dev, offset, + (b43_phy_read(dev, offset) & mask) | set); +} + +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) +{ + struct b43_phy *phy = &(dev->phy); + u16 channelcookie, savedcookie; + int err; + + if (new_channel == B43_DEFAULT_CHANNEL) + new_channel = phy->ops->get_default_chan(dev); + + /* First we set the channel radio code to prevent the + * firmware from sending ghost packets. + */ + channelcookie = new_channel; + if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) + channelcookie |= 0x100; + //FIXME set 40Mhz flag if required + savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); + + /* Now try to switch the PHY hardware channel. */ + err = phy->ops->switch_channel(dev, new_channel); + if (err) + goto err_restore_cookie; + + dev->phy.channel = new_channel; + /* Wait for the radio to tune to the channel and stabilize. */ + msleep(8); + + return 0; + +err_restore_cookie: + b43_shm_write16(dev, B43_SHM_SHARED, + B43_SHM_SH_CHAN, savedcookie); + + return err; +} + +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + + if (state == RFKILL_STATE_HARD_BLOCKED) { + /* We cannot hardware-block the device */ + state = RFKILL_STATE_SOFT_BLOCKED; + } + + phy->ops->software_rfkill(dev, state); + phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); +} + +/** + * b43_phy_txpower_adjust_work - TX power workqueue. + * + * Workqueue for updating the TX power parameters in hardware. + */ +void b43_phy_txpower_adjust_work(struct work_struct *work) +{ + struct b43_wl *wl = container_of(work, struct b43_wl, + txpower_adjust_work); + struct b43_wldev *dev; + + mutex_lock(&wl->mutex); + dev = wl->current_dev; + + if (likely(dev && (b43_status(dev) >= B43_STAT_STARTED))) + dev->phy.ops->adjust_txpower(dev); + + mutex_unlock(&wl->mutex); +} + +/* Called with wl->irq_lock locked */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags) +{ + struct b43_phy *phy = &dev->phy; + unsigned long now = jiffies; + enum b43_txpwr_result result; + + if (!(flags & B43_TXPWR_IGNORE_TIME)) { + /* Check if it's time for a TXpower check. */ + if (time_before(now, phy->next_txpwr_check_time)) + return; /* Not yet */ + } + /* The next check will be needed in two seconds, or later. */ + phy->next_txpwr_check_time = round_jiffies(now + (HZ * 2)); + + if ((dev->dev->bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (dev->dev->bus->boardinfo.type == SSB_BOARD_BU4306)) + return; /* No software txpower adjustment needed */ + + result = phy->ops->recalc_txpower(dev, !!(flags & B43_TXPWR_IGNORE_TSSI)); + if (result == B43_TXPWR_RES_DONE) + return; /* We are done. */ + B43_WARN_ON(result != B43_TXPWR_RES_NEED_ADJUST); + B43_WARN_ON(phy->ops->adjust_txpower == NULL); + + /* We must adjust the transmission power in hardware. + * Schedule b43_phy_txpower_adjust_work(). */ + queue_work(dev->wl->hw->workqueue, &dev->wl->txpower_adjust_work); +} + +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset) +{ + const bool is_ofdm = (shm_offset != B43_SHM_SH_TSSI_CCK); + unsigned int a, b, c, d; + unsigned int average; + u32 tmp; + + tmp = b43_shm_read32(dev, B43_SHM_SHARED, shm_offset); + a = tmp & 0xFF; + b = (tmp >> 8) & 0xFF; + c = (tmp >> 16) & 0xFF; + d = (tmp >> 24) & 0xFF; + if (a == 0 || a == B43_TSSI_MAX || + b == 0 || b == B43_TSSI_MAX || + c == 0 || c == B43_TSSI_MAX || + d == 0 || d == B43_TSSI_MAX) + return -ENOENT; + /* The values are OK. Clear them. */ + tmp = B43_TSSI_MAX | (B43_TSSI_MAX << 8) | + (B43_TSSI_MAX << 16) | (B43_TSSI_MAX << 24); + b43_shm_write32(dev, B43_SHM_SHARED, shm_offset, tmp); + + if (is_ofdm) { + a = (a + 32) & 0x3F; + b = (b + 32) & 0x3F; + c = (c + 32) & 0x3F; + d = (d + 32) & 0x3F; + } + + /* Get the average of the values with 0.5 added to each value. */ + average = (a + b + c + d + 2) / 4; + if (is_ofdm) { + /* Adjust for CCK-boost */ + if (b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFLO) + & B43_HF_CCKBOOST) + average = (average >= 13) ? (average - 13) : 0; + } + + return average; +} + +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on) +{ + b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4); +} diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h new file mode 100644 index 000000000000..c9f5430d1d7d --- /dev/null +++ b/drivers/net/wireless/b43/phy_common.h @@ -0,0 +1,413 @@ +#ifndef LINUX_B43_PHY_COMMON_H_ +#define LINUX_B43_PHY_COMMON_H_ + +#include <linux/rfkill.h> + +struct b43_wldev; + + +/* PHY register routing bits */ +#define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ +#define B43_PHYROUTE_BASE 0x0000 /* Base registers */ +#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ +#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ +#define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ + +/* CCK (B-PHY) registers. */ +#define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY registers. */ +#define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) +/* N-PHY BMODE registers. */ +#define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) +/* OFDM (A-PHY) registers. */ +#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) +/* Extended G-PHY registers. */ +#define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) + + +/* Masks for the PHY versioning registers. */ +#define B43_PHYVER_ANALOG 0xF000 +#define B43_PHYVER_ANALOG_SHIFT 12 +#define B43_PHYVER_TYPE 0x0F00 +#define B43_PHYVER_TYPE_SHIFT 8 +#define B43_PHYVER_VERSION 0x00FF + +/** + * enum b43_interference_mitigation - Interference Mitigation mode + * + * @B43_INTERFMODE_NONE: Disabled + * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation + * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation + * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation + */ +enum b43_interference_mitigation { + B43_INTERFMODE_NONE, + B43_INTERFMODE_NONWLAN, + B43_INTERFMODE_MANUALWLAN, + B43_INTERFMODE_AUTOWLAN, +}; + +/* Antenna identifiers */ +enum { + B43_ANTENNA0, /* Antenna 0 */ + B43_ANTENNA1, /* Antenna 0 */ + B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ + B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ + B43_ANTENNA2, + B43_ANTENNA3 = 8, + + B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, + B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, +}; + +/** + * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. + * + * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. + * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. + */ +enum b43_txpwr_result { + B43_TXPWR_RES_NEED_ADJUST, + B43_TXPWR_RES_DONE, +}; + +/** + * struct b43_phy_operations - Function pointers for PHY ops. + * + * @allocate: Allocate and initialise the PHY data structures. + * Must not be NULL. + * @free: Destroy and free the PHY data structures. + * Must not be NULL. + * + * @prepare_structs: Prepare the PHY data structures. + * The data structures allocated in @allocate are + * initialized here. + * Must not be NULL. + * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to + * do some early early PHY hardware init. + * Can be NULL, if not required. + * @init: Initialize the PHY. + * Must not be NULL. + * @exit: Shutdown the PHY. + * Can be NULL, if not required. + * + * @phy_read: Read from a PHY register. + * Must not be NULL. + * @phy_write: Write to a PHY register. + * Must not be NULL. + * @radio_read: Read from a Radio register. + * Must not be NULL. + * @radio_write: Write to a Radio register. + * Must not be NULL. + * + * @supports_hwpctl: Returns a boolean whether Hardware Power Control + * is supported or not. + * If NULL, hwpctl is assumed to be never supported. + * @software_rfkill: Turn the radio ON or OFF. + * Possible state values are + * RFKILL_STATE_SOFT_BLOCKED or + * RFKILL_STATE_UNBLOCKED + * Must not be NULL. + * @switch_analog: Turn the Analog on/off. + * Must not be NULL. + * @switch_channel: Switch the radio to another channel. + * Must not be NULL. + * @get_default_chan: Just returns the default channel number. + * Must not be NULL. + * @set_rx_antenna: Set the antenna used for RX. + * Can be NULL, if not supported. + * @interf_mitigation: Switch the Interference Mitigation mode. + * Can be NULL, if not supported. + * + * @recalc_txpower: Recalculate the transmission power parameters. + * This callback has to recalculate the TX power settings, + * but does not need to write them to the hardware, yet. + * Returns enum b43_txpwr_result to indicate whether the hardware + * needs to be adjusted. + * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower + * will be called later. + * If the parameter "ignore_tssi" is true, the TSSI values should + * be ignored and a recalculation of the power settings should be + * done even if the TSSI values did not change. + * This callback is called with wl->irq_lock held and must not sleep. + * Must not be NULL. + * @adjust_txpower: Write the previously calculated TX power settings + * (from @recalc_txpower) to the hardware. + * This function may sleep. + * Can be NULL, if (and ONLY if) @recalc_txpower _always_ + * returns B43_TXPWR_RES_DONE. + * + * @pwork_15sec: Periodic work. Called every 15 seconds. + * Can be NULL, if not required. + * @pwork_60sec: Periodic work. Called every 60 seconds. + * Can be NULL, if not required. + */ +struct b43_phy_operations { + /* Initialisation */ + int (*allocate)(struct b43_wldev *dev); + void (*free)(struct b43_wldev *dev); + void (*prepare_structs)(struct b43_wldev *dev); + int (*prepare_hardware)(struct b43_wldev *dev); + int (*init)(struct b43_wldev *dev); + void (*exit)(struct b43_wldev *dev); + + /* Register access */ + u16 (*phy_read)(struct b43_wldev *dev, u16 reg); + void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value); + u16 (*radio_read)(struct b43_wldev *dev, u16 reg); + void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value); + + /* Radio */ + bool (*supports_hwpctl)(struct b43_wldev *dev); + void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state); + void (*switch_analog)(struct b43_wldev *dev, bool on); + int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); + unsigned int (*get_default_chan)(struct b43_wldev *dev); + void (*set_rx_antenna)(struct b43_wldev *dev, int antenna); + int (*interf_mitigation)(struct b43_wldev *dev, + enum b43_interference_mitigation new_mode); + + /* Transmission power adjustment */ + enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, + bool ignore_tssi); + void (*adjust_txpower)(struct b43_wldev *dev); + + /* Misc */ + void (*pwork_15sec)(struct b43_wldev *dev); + void (*pwork_60sec)(struct b43_wldev *dev); +}; + +struct b43_phy_a; +struct b43_phy_g; +struct b43_phy_n; +struct b43_phy_lp; + +struct b43_phy { + /* Hardware operation callbacks. */ + const struct b43_phy_operations *ops; + + /* Most hardware context information is stored in the standard- + * specific data structures pointed to by the pointers below. + * Only one of them is valid (the currently enabled PHY). */ +#ifdef CONFIG_B43_DEBUG + /* No union for debug build to force NULL derefs in buggy code. */ + struct { +#else + union { +#endif + /* A-PHY specific information */ + struct b43_phy_a *a; + /* G-PHY specific information */ + struct b43_phy_g *g; + /* N-PHY specific information */ + struct b43_phy_n *n; + /* LP-PHY specific information */ + struct b43_phy_lp *lp; + }; + + /* Band support flags. */ + bool supports_2ghz; + bool supports_5ghz; + + /* GMODE bit enabled? */ + bool gmode; + + /* Analog Type */ + u8 analog; + /* B43_PHYTYPE_ */ + u8 type; + /* PHY revision number. */ + u8 rev; + + /* Radio versioning */ + u16 radio_manuf; /* Radio manufacturer */ + u16 radio_ver; /* Radio version */ + u8 radio_rev; /* Radio revision */ + + /* Software state of the radio */ + bool radio_on; + + /* Desired TX power level (in dBm). + * This is set by the user and adjusted in b43_phy_xmitpower(). */ + int desired_txpower; + + /* Hardware Power Control enabled? */ + bool hardware_power_control; + + /* The time (in absolute jiffies) when the next TX power output + * check is needed. */ + unsigned long next_txpwr_check_time; + + /* current channel */ + unsigned int channel; + + /* PHY TX errors counter. */ + atomic_t txerr_cnt; + +#ifdef CONFIG_B43_DEBUG + /* PHY registers locked by b43_phy_lock()? */ + bool phy_locked; +#endif /* B43_DEBUG */ +}; + + +/** + * b43_phy_allocate - Allocate PHY structs + * Allocate the PHY data structures, based on the current dev->phy.type + */ +int b43_phy_allocate(struct b43_wldev *dev); + +/** + * b43_phy_free - Free PHY structs + */ +void b43_phy_free(struct b43_wldev *dev); + +/** + * b43_phy_init - Initialise the PHY + */ +int b43_phy_init(struct b43_wldev *dev); + +/** + * b43_phy_exit - Cleanup PHY + */ +void b43_phy_exit(struct b43_wldev *dev); + +/** + * b43_has_hardware_pctl - Hardware Power Control supported? + * Returns a boolean, whether hardware power control is supported. + */ +bool b43_has_hardware_pctl(struct b43_wldev *dev); + +/** + * b43_phy_read - 16bit PHY register read access + */ +u16 b43_phy_read(struct b43_wldev *dev, u16 reg); + +/** + * b43_phy_write - 16bit PHY register write access + */ +void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value); + +/** + * b43_phy_mask - Mask a PHY register with a mask + */ +void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_phy_set - OR a PHY register with a bitmap + */ +void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap + */ +void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_read - 16bit Radio register read access + */ +u16 b43_radio_read(struct b43_wldev *dev, u16 reg); +#define b43_radio_read16 b43_radio_read /* DEPRECATED */ + +/** + * b43_radio_write - 16bit Radio register write access + */ +void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value); +#define b43_radio_write16 b43_radio_write /* DEPRECATED */ + +/** + * b43_radio_mask - Mask a 16bit radio register with a mask + */ +void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); + +/** + * b43_radio_set - OR a 16bit radio register with a bitmap + */ +void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); + +/** + * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap + */ +void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); + +/** + * b43_radio_lock - Lock firmware radio register access + */ +void b43_radio_lock(struct b43_wldev *dev); + +/** + * b43_radio_unlock - Unlock firmware radio register access + */ +void b43_radio_unlock(struct b43_wldev *dev); + +/** + * b43_phy_lock - Lock firmware PHY register access + */ +void b43_phy_lock(struct b43_wldev *dev); + +/** + * b43_phy_unlock - Unlock firmware PHY register access + */ +void b43_phy_unlock(struct b43_wldev *dev); + +/** + * b43_switch_channel - Switch to another channel + */ +int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); +/** + * B43_DEFAULT_CHANNEL - Switch to the default channel. + */ +#define B43_DEFAULT_CHANNEL UINT_MAX + +/** + * b43_software_rfkill - Turn the radio ON or OFF in software. + */ +void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state); + +/** + * b43_phy_txpower_check - Check TX power output. + * + * Compare the current TX power output to the desired power emission + * and schedule an adjustment in case it mismatches. + * Requires wl->irq_lock locked. + * + * @flags: OR'ed enum b43_phy_txpower_check_flags flags. + * See the docs below. + */ +void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); +/** + * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() + * + * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo + * the check now. + * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average + * TSSI did not change. + */ +enum b43_phy_txpower_check_flags { + B43_TXPWR_IGNORE_TIME = (1 << 0), + B43_TXPWR_IGNORE_TSSI = (1 << 1), +}; + +struct work_struct; +void b43_phy_txpower_adjust_work(struct work_struct *work); + +/** + * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. + * + * @shm_offset: The SHM address to read the values from. + * + * Returns the average of the 4 TSSI values, or a negative error code. + */ +int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); + +/** + * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog. + * + * It does the switching based on the PHY0 core register. + * Do _not_ call this directly. Only use it as a switch_analog callback + * for struct b43_phy_operations. + */ +void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on); + + +#endif /* LINUX_B43_PHY_COMMON_H_ */ diff --git a/drivers/net/wireless/b43/phy.c b/drivers/net/wireless/b43/phy_g.c index 305d4cd6fd03..232181f6333c 100644 --- a/drivers/net/wireless/b43/phy.c +++ b/drivers/net/wireless/b43/phy_g.c @@ -1,10 +1,11 @@ /* Broadcom B43 wireless driver + IEEE 802.11g PHY driver Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> - Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de> + Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> @@ -25,38 +26,14 @@ */ -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/types.h> -#include <linux/bitrev.h> - #include "b43.h" -#include "phy.h" -#include "nphy.h" -#include "main.h" -#include "tables.h" +#include "phy_g.h" +#include "phy_common.h" #include "lo.h" -#include "wa.h" - - -static const s8 b43_tssi2dbm_b_table[] = { - 0x4D, 0x4C, 0x4B, 0x4A, - 0x4A, 0x49, 0x48, 0x47, - 0x47, 0x46, 0x45, 0x45, - 0x44, 0x43, 0x42, 0x42, - 0x41, 0x40, 0x3F, 0x3E, - 0x3D, 0x3C, 0x3B, 0x3A, - 0x39, 0x38, 0x37, 0x36, - 0x35, 0x34, 0x32, 0x31, - 0x30, 0x2F, 0x2D, 0x2C, - 0x2B, 0x29, 0x28, 0x26, - 0x25, 0x23, 0x21, 0x1F, - 0x1D, 0x1A, 0x17, 0x14, - 0x10, 0x0C, 0x06, 0x00, - -7, -7, -7, -7, - -7, -7, -7, -7, - -7, -7, -7, -7, -}; +#include "main.h" + +#include <linux/bitrev.h> + static const s8 b43_tssi2dbm_g_table[] = { 77, 77, 77, 76, @@ -84,8 +61,20 @@ const u8 b43_radio_channel_codes_bg[] = { 72, 84, }; + +static void b43_calc_nrssi_threshold(struct b43_wldev *dev); + + #define bitrev4(tmp) (bitrev8(tmp) >> 4) -static void b43_phy_initg(struct b43_wldev *dev); + + +/* Get the freq, as it has to be written to the device. */ +static inline u16 channel2freq_bg(u8 channel) +{ + B43_WARN_ON(!(channel >= 1 && channel <= 14)); + + return b43_radio_channel_codes_bg[channel - 1]; +} static void generate_rfatt_list(struct b43_wldev *dev, struct b43_rfatt_list *list) @@ -130,7 +119,7 @@ static void generate_rfatt_list(struct b43_wldev *dev, {.att = 9,.with_padmix = 1,}, }; - if (!b43_has_hardware_pctl(phy)) { + if (!b43_has_hardware_pctl(dev)) { /* Software pctl */ list->list = rfatt_0; list->len = ARRAY_SIZE(rfatt_0); @@ -174,140 +163,55 @@ static void generate_bbatt_list(struct b43_wldev *dev, list->max_val = 8; } -bool b43_has_hardware_pctl(struct b43_phy *phy) -{ - if (!phy->hardware_power_control) - return 0; - switch (phy->type) { - case B43_PHYTYPE_A: - if (phy->rev >= 5) - return 1; - break; - case B43_PHYTYPE_G: - if (phy->rev >= 6) - return 1; - break; - default: - B43_WARN_ON(1); - } - return 0; -} - static void b43_shm_clear_tssi(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; - - switch (phy->type) { - case B43_PHYTYPE_A: - b43_shm_write16(dev, B43_SHM_SHARED, 0x0068, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x006a, 0x7F7F); - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); - b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); - break; - } -} - -/* Lock the PHY registers against concurrent access from the microcode. - * This lock is nonrecursive. */ -void b43_phy_lock(struct b43_wldev *dev) -{ -#if B43_DEBUG - B43_WARN_ON(dev->phy.phy_locked); - dev->phy.phy_locked = 1; -#endif - B43_WARN_ON(dev->dev->id.revision < 3); - - if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) - b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F); + b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F); } -void b43_phy_unlock(struct b43_wldev *dev) +/* Synthetic PU workaround */ +static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) { -#if B43_DEBUG - B43_WARN_ON(!dev->phy.phy_locked); - dev->phy.phy_locked = 0; -#endif - B43_WARN_ON(dev->dev->id.revision < 3); + struct b43_phy *phy = &dev->phy; - if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) - b43_power_saving_ctl_bits(dev, 0); -} + might_sleep(); -/* Different PHYs require different register routing flags. - * This adjusts (and does sanity checks on) the routing flags. - */ -static inline u16 adjust_phyreg_for_phytype(struct b43_phy *phy, - u16 offset, struct b43_wldev *dev) -{ - if (phy->type == B43_PHYTYPE_A) { - /* OFDM registers are base-registers for the A-PHY. */ - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { - offset &= ~B43_PHYROUTE; - offset |= B43_PHYROUTE_BASE; - } + if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { + /* We do not need the workaround. */ + return; } -#if B43_DEBUG - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { - /* Ext-G registers are only available on G-PHYs */ - if (phy->type != B43_PHYTYPE_G) { - b43err(dev->wl, "Invalid EXT-G PHY access at " - "0x%04X on PHY type %u\n", offset, phy->type); - dump_stack(); - } - } - if ((offset & B43_PHYROUTE) == B43_PHYROUTE_N_BMODE) { - /* N-BMODE registers are only available on N-PHYs */ - if (phy->type != B43_PHYTYPE_N) { - b43err(dev->wl, "Invalid N-BMODE PHY access at " - "0x%04X on PHY type %u\n", offset, phy->type); - dump_stack(); - } + if (channel <= 10) { + b43_write16(dev, B43_MMIO_CHANNEL, + channel2freq_bg(channel + 4)); + } else { + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); } -#endif /* B43_DEBUG */ - - return offset; -} - -u16 b43_phy_read(struct b43_wldev * dev, u16 offset) -{ - struct b43_phy *phy = &dev->phy; - - offset = adjust_phyreg_for_phytype(phy, offset, dev); - b43_write16(dev, B43_MMIO_PHY_CONTROL, offset); - return b43_read16(dev, B43_MMIO_PHY_DATA); + msleep(1); + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); } -void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val) +/* Set the baseband attenuation value on chip. */ +void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, + u16 baseband_attenuation) { struct b43_phy *phy = &dev->phy; - offset = adjust_phyreg_for_phytype(phy, offset, dev); - b43_write16(dev, B43_MMIO_PHY_CONTROL, offset); - b43_write16(dev, B43_MMIO_PHY_DATA, val); -} - -void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) -{ - b43_phy_write(dev, offset, - b43_phy_read(dev, offset) & mask); -} - -void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) -{ - b43_phy_write(dev, offset, - b43_phy_read(dev, offset) | set); -} - -void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) -{ - b43_phy_write(dev, offset, - (b43_phy_read(dev, offset) & mask) | set); + if (phy->analog == 0) { + b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) + & 0xFFF0) | + baseband_attenuation); + } else if (phy->analog > 1) { + b43_phy_write(dev, B43_PHY_DACCTL, + (b43_phy_read(dev, B43_PHY_DACCTL) + & 0xFFC3) | (baseband_attenuation << 2)); + } else { + b43_phy_write(dev, B43_PHY_DACCTL, + (b43_phy_read(dev, B43_PHY_DACCTL) + & 0xFF87) | (baseband_attenuation << 3)); + } } /* Adjust the transmission power output (G-PHY) */ @@ -316,7 +220,8 @@ void b43_set_txpower_g(struct b43_wldev *dev, const struct b43_rfatt *rfatt, u8 tx_control) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 bb, rf; u16 tx_bias, tx_magn; @@ -327,11 +232,12 @@ void b43_set_txpower_g(struct b43_wldev *dev, if (unlikely(tx_bias == 0xFF)) tx_bias = 0; - /* Save the values for later */ - phy->tx_control = tx_control; - memcpy(&phy->rfatt, rfatt, sizeof(*rfatt)); - phy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); - memcpy(&phy->bbatt, bbatt, sizeof(*bbatt)); + /* Save the values for later. Use memmove, because it's valid + * to pass &gphy->rfatt as rfatt pointer argument. Same for bbatt. */ + gphy->tx_control = tx_control; + memmove(&gphy->rfatt, rfatt, sizeof(*rfatt)); + gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX); + memmove(&gphy->bbatt, bbatt, sizeof(*bbatt)); if (b43_debug(dev, B43_DBG_XMITPOWER)) { b43dbg(dev->wl, "Tuning TX-power to bbatt(%u), " @@ -340,7 +246,7 @@ void b43_set_txpower_g(struct b43_wldev *dev, bb, rf, tx_control, tx_bias, tx_magn); } - b43_phy_set_baseband_attenuation(dev, bb); + b43_gphy_set_baseband_attenuation(dev, bb); b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_RFATT, rf); if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { b43_radio_write16(dev, 0x43, @@ -358,179 +264,23 @@ void b43_set_txpower_g(struct b43_wldev *dev, b43_radio_write16(dev, 0x52, (b43_radio_read16(dev, 0x52) & 0xFFF0) | (tx_bias & 0x000F)); } - if (phy->type == B43_PHYTYPE_G) - b43_lo_g_adjust(dev); -} - -static void default_baseband_attenuation(struct b43_wldev *dev, - struct b43_bbatt *bb) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) - bb->att = 0; - else - bb->att = 2; -} - -static void default_radio_attenuation(struct b43_wldev *dev, - struct b43_rfatt *rf) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - rf->with_padmix = 0; - - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && - bus->boardinfo.type == SSB_BOARD_BCM4309G) { - if (bus->boardinfo.rev < 0x43) { - rf->att = 2; - return; - } else if (bus->boardinfo.rev < 0x51) { - rf->att = 3; - return; - } - } - - if (phy->type == B43_PHYTYPE_A) { - rf->att = 0x60; - return; - } - - switch (phy->radio_ver) { - case 0x2053: - switch (phy->radio_rev) { - case 1: - rf->att = 6; - return; - } - break; - case 0x2050: - switch (phy->radio_rev) { - case 0: - rf->att = 5; - return; - case 1: - if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 3; - else if (bus->boardinfo.vendor == - SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == - SSB_BOARD_BU4306) - rf->att = 3; - else - rf->att = 1; - } else { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 7; - else - rf->att = 6; - } - return; - case 2: - if (phy->type == B43_PHYTYPE_G) { - if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == SSB_BOARD_BCM4309G - && bus->boardinfo.rev >= 30) - rf->att = 3; - else if (bus->boardinfo.vendor == - SSB_BOARDVENDOR_BCM - && bus->boardinfo.type == - SSB_BOARD_BU4306) - rf->att = 5; - else if (bus->chip_id == 0x4320) - rf->att = 4; - else - rf->att = 3; - } else - rf->att = 6; - return; - case 3: - rf->att = 5; - return; - case 4: - case 5: - rf->att = 1; - return; - case 6: - case 7: - rf->att = 5; - return; - case 8: - rf->att = 0xA; - rf->with_padmix = 1; - return; - case 9: - default: - rf->att = 5; - return; - } - } - rf->att = 5; -} - -static u16 default_tx_control(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->radio_ver != 0x2050) - return 0; - if (phy->radio_rev == 1) - return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; - if (phy->radio_rev < 6) - return B43_TXCTL_PA2DB; - if (phy->radio_rev == 8) - return B43_TXCTL_TXMIX; - return 0; -} - -/* This func is called "PHY calibrate" in the specs... */ -void b43_phy_early_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; - - default_baseband_attenuation(dev, &phy->bbatt); - default_radio_attenuation(dev, &phy->rfatt); - phy->tx_control = (default_tx_control(dev) << 4); - - /* Commit previous writes */ - b43_read32(dev, B43_MMIO_MACCTL); - - if (phy->type == B43_PHYTYPE_B || phy->type == B43_PHYTYPE_G) { - generate_rfatt_list(dev, &lo->rfatt_list); - generate_bbatt_list(dev, &lo->bbatt_list); - } - if (phy->type == B43_PHYTYPE_G && phy->rev == 1) { - /* Workaround: Temporarly disable gmode through the early init - * phase, as the gmode stuff is not needed for phy rev 1 */ - phy->gmode = 0; - b43_wireless_core_reset(dev, 0); - b43_phy_initg(dev); - phy->gmode = 1; - b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); - } + b43_lo_g_adjust(dev); } /* GPHY_TSSI_Power_Lookup_Table_Init */ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; int i; u16 value; for (i = 0; i < 32; i++) - b43_ofdmtab_write16(dev, 0x3C20, i, phy->tssi2dbm[i]); + b43_ofdmtab_write16(dev, 0x3C20, i, gphy->tssi2dbm[i]); for (i = 32; i < 64; i++) - b43_ofdmtab_write16(dev, 0x3C00, i - 32, phy->tssi2dbm[i]); + b43_ofdmtab_write16(dev, 0x3C00, i - 32, gphy->tssi2dbm[i]); for (i = 0; i < 64; i += 2) { - value = (u16) phy->tssi2dbm[i]; - value |= ((u16) phy->tssi2dbm[i + 1]) << 8; + value = (u16) gphy->tssi2dbm[i]; + value |= ((u16) gphy->tssi2dbm[i + 1]) << 8; b43_phy_write(dev, 0x380 + (i / 2), value); } } @@ -539,7 +289,8 @@ static void b43_gphy_tssi_power_lt_init(struct b43_wldev *dev) static void b43_gphy_gain_lt_init(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - struct b43_txpower_lo_control *lo = phy->lo_control; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; u16 nr_written = 0; u16 tmp; u8 rf, bb; @@ -561,1509 +312,6 @@ static void b43_gphy_gain_lt_init(struct b43_wldev *dev) } } -static void hardware_pctl_init_aphy(struct b43_wldev *dev) -{ - //TODO -} - -static void hardware_pctl_init_gphy(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0) - | (phy->tgt_idle_tssi - phy->cur_idle_tssi)); - b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00) - | (phy->tgt_idle_tssi - phy->cur_idle_tssi)); - b43_gphy_tssi_power_lt_init(dev); - b43_gphy_gain_lt_init(dev); - b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF); - b43_phy_write(dev, 0x0014, 0x0000); - - B43_WARN_ON(phy->rev < 6); - b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) - | 0x0800); - b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) - & 0xFEFF); - b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) - & 0xFFBF); - - b43_gphy_dc_lt_init(dev, 1); -} - -/* HardwarePowerControl init for A and G PHY */ -static void b43_hardware_pctl_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (!b43_has_hardware_pctl(phy)) { - /* No hardware power control */ - b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); - return; - } - /* Init the hwpctl related hardware */ - switch (phy->type) { - case B43_PHYTYPE_A: - hardware_pctl_init_aphy(dev); - break; - case B43_PHYTYPE_G: - hardware_pctl_init_gphy(dev); - break; - default: - B43_WARN_ON(1); - } - /* Enable hardware pctl in firmware. */ - b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); -} - -static void b43_hardware_pctl_early_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - - if (!b43_has_hardware_pctl(phy)) { - b43_phy_write(dev, 0x047A, 0xC111); - return; - } - - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF); - b43_phy_write(dev, 0x002F, 0x0202); - b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002); - b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000); - if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { - b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) - & 0xFF0F) | 0x0010); - b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) - | 0x8000); - b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) - & 0xFFC0) | 0x0010); - b43_phy_write(dev, 0x002E, 0xC07F); - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0400); - } else { - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0200); - b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) - | 0x0400); - b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) - & 0x7FFF); - b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F) - & 0xFFFE); - b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) - & 0xFFC0) | 0x0010); - b43_phy_write(dev, 0x002E, 0xC07F); - b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) - & 0xFF0F) | 0x0010); - } -} - -/* Intialize B/G PHY power control - * as described in http://bcm-specs.sipsolutions.net/InitPowerControl - */ -static void b43_phy_init_pctl(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - struct b43_rfatt old_rfatt; - struct b43_bbatt old_bbatt; - u8 old_tx_control = 0; - - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; - - b43_phy_write(dev, 0x0028, 0x8018); - - /* This does something with the Analog... */ - b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) - & 0xFFDF); - - if (phy->type == B43_PHYTYPE_G && !phy->gmode) - return; - b43_hardware_pctl_early_init(dev); - if (phy->cur_idle_tssi == 0) { - if (phy->radio_ver == 0x2050 && phy->analog == 0) { - b43_radio_write16(dev, 0x0076, - (b43_radio_read16(dev, 0x0076) - & 0x00F7) | 0x0084); - } else { - struct b43_rfatt rfatt; - struct b43_bbatt bbatt; - - memcpy(&old_rfatt, &phy->rfatt, sizeof(old_rfatt)); - memcpy(&old_bbatt, &phy->bbatt, sizeof(old_bbatt)); - old_tx_control = phy->tx_control; - - bbatt.att = 11; - if (phy->radio_rev == 8) { - rfatt.att = 15; - rfatt.with_padmix = 1; - } else { - rfatt.att = 9; - rfatt.with_padmix = 0; - } - b43_set_txpower_g(dev, &bbatt, &rfatt, 0); - } - b43_dummy_transmission(dev); - phy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); - if (B43_DEBUG) { - /* Current-Idle-TSSI sanity check. */ - if (abs(phy->cur_idle_tssi - phy->tgt_idle_tssi) >= 20) { - b43dbg(dev->wl, - "!WARNING! Idle-TSSI phy->cur_idle_tssi " - "measuring failed. (cur=%d, tgt=%d). Disabling TX power " - "adjustment.\n", phy->cur_idle_tssi, - phy->tgt_idle_tssi); - phy->cur_idle_tssi = 0; - } - } - if (phy->radio_ver == 0x2050 && phy->analog == 0) { - b43_radio_write16(dev, 0x0076, - b43_radio_read16(dev, 0x0076) - & 0xFF7B); - } else { - b43_set_txpower_g(dev, &old_bbatt, - &old_rfatt, old_tx_control); - } - } - b43_hardware_pctl_init(dev); - b43_shm_clear_tssi(dev); -} - -static void b43_phy_rssiagc(struct b43_wldev *dev, u8 enable) -{ - int i; - - if (dev->phy.rev < 3) { - if (enable) - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { - b43_ofdmtab_write16(dev, - B43_OFDMTAB_LNAHPFGAIN1, i, 0xFFF8); - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, 0xFFF8); - } - else - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) { - b43_ofdmtab_write16(dev, - B43_OFDMTAB_LNAHPFGAIN1, i, b43_tab_rssiagc1[i]); - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc1[i]); - } - } else { - if (enable) - for (i = 0; i < B43_TAB_RSSIAGC1_SIZE; i++) - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, 0x0820); - else - for (i = 0; i < B43_TAB_RSSIAGC2_SIZE; i++) - b43_ofdmtab_write16(dev, - B43_OFDMTAB_WRSSI, i, b43_tab_rssiagc2[i]); - } -} - -static void b43_phy_ww(struct b43_wldev *dev) -{ - u16 b, curr_s, best_s = 0xFFFF; - int i; - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) & ~B43_PHY_CRS0_EN); - b43_phy_write(dev, B43_PHY_OFDM(0x1B), - b43_phy_read(dev, B43_PHY_OFDM(0x1B)) | 0x1000); - b43_phy_write(dev, B43_PHY_OFDM(0x82), - (b43_phy_read(dev, B43_PHY_OFDM(0x82)) & 0xF0FF) | 0x0300); - b43_radio_write16(dev, 0x0009, - b43_radio_read16(dev, 0x0009) | 0x0080); - b43_radio_write16(dev, 0x0012, - (b43_radio_read16(dev, 0x0012) & 0xFFFC) | 0x0002); - b43_wa_initgains(dev); - b43_phy_write(dev, B43_PHY_OFDM(0xBA), 0x3ED5); - b = b43_phy_read(dev, B43_PHY_PWRDOWN); - b43_phy_write(dev, B43_PHY_PWRDOWN, (b & 0xFFF8) | 0x0005); - b43_radio_write16(dev, 0x0004, - b43_radio_read16(dev, 0x0004) | 0x0004); - for (i = 0x10; i <= 0x20; i++) { - b43_radio_write16(dev, 0x0013, i); - curr_s = b43_phy_read(dev, B43_PHY_OTABLEQ) & 0x00FF; - if (!curr_s) { - best_s = 0x0000; - break; - } else if (curr_s >= 0x0080) - curr_s = 0x0100 - curr_s; - if (curr_s < best_s) - best_s = curr_s; - } - b43_phy_write(dev, B43_PHY_PWRDOWN, b); - b43_radio_write16(dev, 0x0004, - b43_radio_read16(dev, 0x0004) & 0xFFFB); - b43_radio_write16(dev, 0x0013, best_s); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1_R1, 0, 0xFFEC); - b43_phy_write(dev, B43_PHY_OFDM(0xB7), 0x1E80); - b43_phy_write(dev, B43_PHY_OFDM(0xB6), 0x1C00); - b43_phy_write(dev, B43_PHY_OFDM(0xB5), 0x0EC0); - b43_phy_write(dev, B43_PHY_OFDM(0xB2), 0x00C0); - b43_phy_write(dev, B43_PHY_OFDM(0xB9), 0x1FFF); - b43_phy_write(dev, B43_PHY_OFDM(0xBB), - (b43_phy_read(dev, B43_PHY_OFDM(0xBB)) & 0xF000) | 0x0053); - b43_phy_write(dev, B43_PHY_OFDM61, - (b43_phy_read(dev, B43_PHY_OFDM61) & 0xFE1F) | 0x0120); - b43_phy_write(dev, B43_PHY_OFDM(0x13), - (b43_phy_read(dev, B43_PHY_OFDM(0x13)) & 0x0FFF) | 0x3000); - b43_phy_write(dev, B43_PHY_OFDM(0x14), - (b43_phy_read(dev, B43_PHY_OFDM(0x14)) & 0x0FFF) | 0x3000); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 6, 0x0017); - for (i = 0; i < 6; i++) - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, i, 0x000F); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0D, 0x000E); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0E, 0x0011); - b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 0x0F, 0x0013); - b43_phy_write(dev, B43_PHY_OFDM(0x33), 0x5030); - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); -} - -/* Initialize APHY. This is also called for the GPHY in some cases. */ -static void b43_phy_inita(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - might_sleep(); - - if (phy->rev >= 6) { - if (phy->type == B43_PHYTYPE_A) - b43_phy_write(dev, B43_PHY_OFDM(0x1B), - b43_phy_read(dev, B43_PHY_OFDM(0x1B)) & ~0x1000); - if (b43_phy_read(dev, B43_PHY_ENCORE) & B43_PHY_ENCORE_EN) - b43_phy_write(dev, B43_PHY_ENCORE, - b43_phy_read(dev, B43_PHY_ENCORE) | 0x0010); - else - b43_phy_write(dev, B43_PHY_ENCORE, - b43_phy_read(dev, B43_PHY_ENCORE) & ~0x1010); - } - - b43_wa_all(dev); - - if (phy->type == B43_PHYTYPE_A) { - if (phy->gmode && (phy->rev < 3)) - b43_phy_write(dev, 0x0034, - b43_phy_read(dev, 0x0034) | 0x0001); - b43_phy_rssiagc(dev, 0); - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) | B43_PHY_CRS0_EN); - - b43_radio_init2060(dev); - - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - ((bus->boardinfo.type == SSB_BOARD_BU4306) || - (bus->boardinfo.type == SSB_BOARD_BU4309))) { - ; //TODO: A PHY LO - } - - if (phy->rev >= 3) - b43_phy_ww(dev); - - hardware_pctl_init_aphy(dev); - - //TODO: radar detection - } - - if ((phy->type == B43_PHYTYPE_G) && - (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) { - b43_phy_write(dev, B43_PHY_OFDM(0x6E), - (b43_phy_read(dev, B43_PHY_OFDM(0x6E)) - & 0xE000) | 0x3CF); - } -} - -static void b43_phy_initb5(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - u16 offset, value; - u8 old_channel; - - if (phy->analog == 1) { - b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) - | 0x0050); - } - if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type != SSB_BOARD_BU4306)) { - value = 0x2120; - for (offset = 0x00A8; offset < 0x00C7; offset++) { - b43_phy_write(dev, offset, value); - value += 0x202; - } - } - b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF) - | 0x0700); - if (phy->radio_ver == 0x2050) - b43_phy_write(dev, 0x0038, 0x0667); - - if (phy->gmode || phy->rev >= 2) { - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) - | 0x0020); - b43_radio_write16(dev, 0x0051, - b43_radio_read16(dev, 0x0051) - | 0x0004); - } - b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); - - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); - b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); - - b43_phy_write(dev, 0x001C, 0x186A); - - b43_phy_write(dev, 0x0013, - (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900); - b43_phy_write(dev, 0x0035, - (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064); - b43_phy_write(dev, 0x005D, - (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); - } - - if (dev->bad_frames_preempt) { - b43_phy_write(dev, B43_PHY_RADIO_BITFIELD, - b43_phy_read(dev, - B43_PHY_RADIO_BITFIELD) | (1 << 11)); - } - - if (phy->analog == 1) { - b43_phy_write(dev, 0x0026, 0xCE00); - b43_phy_write(dev, 0x0021, 0x3763); - b43_phy_write(dev, 0x0022, 0x1BC3); - b43_phy_write(dev, 0x0023, 0x06F9); - b43_phy_write(dev, 0x0024, 0x037E); - } else - b43_phy_write(dev, 0x0026, 0xCC00); - b43_phy_write(dev, 0x0030, 0x00C6); - b43_write16(dev, 0x03EC, 0x3F22); - - if (phy->analog == 1) - b43_phy_write(dev, 0x0020, 0x3E1C); - else - b43_phy_write(dev, 0x0020, 0x301C); - - if (phy->analog == 0) - b43_write16(dev, 0x03E4, 0x3000); - - old_channel = phy->channel; - /* Force to channel 7, even if not supported. */ - b43_radio_selectchannel(dev, 7, 0); - - if (phy->radio_ver != 0x2050) { - b43_radio_write16(dev, 0x0075, 0x0080); - b43_radio_write16(dev, 0x0079, 0x0081); - } - - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - - if (phy->radio_ver == 0x2050) { - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x005A, 0x0070); - } - - b43_radio_write16(dev, 0x005B, 0x007B); - b43_radio_write16(dev, 0x005C, 0x00B0); - - b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007); - - b43_radio_selectchannel(dev, old_channel, 0); - - b43_phy_write(dev, 0x0014, 0x0080); - b43_phy_write(dev, 0x0032, 0x00CA); - b43_phy_write(dev, 0x002A, 0x88A3); - - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - - if (phy->radio_ver == 0x2050) - b43_radio_write16(dev, 0x005D, 0x000D); - - b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); -} - -static void b43_phy_initb6(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 offset, val; - u8 old_channel; - - b43_phy_write(dev, 0x003E, 0x817A); - b43_radio_write16(dev, 0x007A, - (b43_radio_read16(dev, 0x007A) | 0x0058)); - if (phy->radio_rev == 4 || phy->radio_rev == 5) { - b43_radio_write16(dev, 0x51, 0x37); - b43_radio_write16(dev, 0x52, 0x70); - b43_radio_write16(dev, 0x53, 0xB3); - b43_radio_write16(dev, 0x54, 0x9B); - b43_radio_write16(dev, 0x5A, 0x88); - b43_radio_write16(dev, 0x5B, 0x88); - b43_radio_write16(dev, 0x5D, 0x88); - b43_radio_write16(dev, 0x5E, 0x88); - b43_radio_write16(dev, 0x7D, 0x88); - b43_hf_write(dev, b43_hf_read(dev) - | B43_HF_TSSIRPSMW); - } - B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x51, 0); - b43_radio_write16(dev, 0x52, 0x40); - b43_radio_write16(dev, 0x53, 0xB7); - b43_radio_write16(dev, 0x54, 0x98); - b43_radio_write16(dev, 0x5A, 0x88); - b43_radio_write16(dev, 0x5B, 0x6B); - b43_radio_write16(dev, 0x5C, 0x0F); - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { - b43_radio_write16(dev, 0x5D, 0xFA); - b43_radio_write16(dev, 0x5E, 0xD8); - } else { - b43_radio_write16(dev, 0x5D, 0xF5); - b43_radio_write16(dev, 0x5E, 0xB8); - } - b43_radio_write16(dev, 0x0073, 0x0003); - b43_radio_write16(dev, 0x007D, 0x00A8); - b43_radio_write16(dev, 0x007C, 0x0001); - b43_radio_write16(dev, 0x007E, 0x0008); - } - val = 0x1E1F; - for (offset = 0x0088; offset < 0x0098; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - val = 0x3E3F; - for (offset = 0x0098; offset < 0x00A8; offset++) { - b43_phy_write(dev, offset, val); - val -= 0x0202; - } - val = 0x2120; - for (offset = 0x00A8; offset < 0x00C8; offset++) { - b43_phy_write(dev, offset, (val & 0x3F3F)); - val += 0x0202; - } - if (phy->type == B43_PHYTYPE_G) { - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0020); - b43_radio_write16(dev, 0x0051, - b43_radio_read16(dev, 0x0051) | 0x0004); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); - b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); - b43_phy_write(dev, 0x5B, 0); - b43_phy_write(dev, 0x5C, 0); - } - - old_channel = phy->channel; - if (old_channel >= 8) - b43_radio_selectchannel(dev, 1, 0); - else - b43_radio_selectchannel(dev, 13, 0); - - b43_radio_write16(dev, 0x0050, 0x0020); - b43_radio_write16(dev, 0x0050, 0x0023); - udelay(40); - if (phy->radio_rev < 6 || phy->radio_rev == 8) { - b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) - | 0x0002)); - b43_radio_write16(dev, 0x50, 0x20); - } - if (phy->radio_rev <= 2) { - b43_radio_write16(dev, 0x7C, 0x20); - b43_radio_write16(dev, 0x5A, 0x70); - b43_radio_write16(dev, 0x5B, 0x7B); - b43_radio_write16(dev, 0x5C, 0xB0); - } - b43_radio_write16(dev, 0x007A, - (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007); - - b43_radio_selectchannel(dev, old_channel, 0); - - b43_phy_write(dev, 0x0014, 0x0200); - if (phy->radio_rev >= 6) - b43_phy_write(dev, 0x2A, 0x88C2); - else - b43_phy_write(dev, 0x2A, 0x8AC0); - b43_phy_write(dev, 0x0038, 0x0668); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control); - if (phy->radio_rev <= 5) { - b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D) - & 0xFF80) | 0x0003); - } - if (phy->radio_rev <= 2) - b43_radio_write16(dev, 0x005D, 0x000D); - - if (phy->analog == 4) { - b43_write16(dev, 0x3E4, 9); - b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61) - & 0x0FFF); - } else { - b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) - | 0x0004); - } - if (phy->type == B43_PHYTYPE_B) - B43_WARN_ON(1); - else if (phy->type == B43_PHYTYPE_G) - b43_write16(dev, 0x03E6, 0x0); -} - -static void b43_calc_loopback_gain(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 backup_phy[16] = { 0 }; - u16 backup_radio[3]; - u16 backup_bband; - u16 i, j, loop_i_max; - u16 trsw_rx; - u16 loop1_outer_done, loop1_inner_done; - - backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); - backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); - backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); - backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); - backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); - } - backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); - backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); - backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); - backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); - backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); - backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); - backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); - backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); - backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); - backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); - backup_bband = phy->bbatt.att; - backup_radio[0] = b43_radio_read16(dev, 0x52); - backup_radio[1] = b43_radio_read16(dev, 0x43); - backup_radio[2] = b43_radio_read16(dev, 0x7A); - - b43_phy_write(dev, B43_PHY_CRS0, - b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF); - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, - b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFE); - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFD); - } - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C); - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xFFCF) | 0x10); - - b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); - b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); - b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); - - b43_phy_write(dev, B43_PHY_CCK(0x0A), - b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000); - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, - b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, - b43_phy_read(dev, - B43_PHY_ANALOGOVERVAL) & 0xFFFB); - } - b43_phy_write(dev, B43_PHY_CCK(0x03), - (b43_phy_read(dev, B43_PHY_CCK(0x03)) - & 0xFF9F) | 0x40); - - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x43, 0x000F); - } else { - b43_radio_write16(dev, 0x52, 0); - b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) - & 0xFFF0) | 0x9); - } - b43_phy_set_baseband_attenuation(dev, 11); - - if (phy->rev >= 3) - b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); - else - b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); - b43_phy_write(dev, B43_PHY_LO_CTL, 0); - - b43_phy_write(dev, B43_PHY_CCK(0x2B), - (b43_phy_read(dev, B43_PHY_CCK(0x2B)) - & 0xFFC0) | 0x01); - b43_phy_write(dev, B43_PHY_CCK(0x2B), - (b43_phy_read(dev, B43_PHY_CCK(0x2B)) - & 0xC0FF) | 0x800); - - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); - - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { - if (phy->rev >= 7) { - b43_phy_write(dev, B43_PHY_RFOVER, - b43_phy_read(dev, B43_PHY_RFOVER) - | 0x0800); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) - | 0x8000); - } - } - b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A) - & 0x00F7); - - j = 0; - loop_i_max = (phy->radio_rev == 8) ? 15 : 9; - for (i = 0; i < loop_i_max; i++) { - for (j = 0; j < 16; j++) { - b43_radio_write16(dev, 0x43, i); - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xF0FF) | (j << 8)); - b43_phy_write(dev, B43_PHY_PGACTL, - (b43_phy_read(dev, B43_PHY_PGACTL) - & 0x0FFF) | 0xA000); - b43_phy_write(dev, B43_PHY_PGACTL, - b43_phy_read(dev, B43_PHY_PGACTL) - | 0xF000); - udelay(20); - if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) - goto exit_loop1; - } - } - exit_loop1: - loop1_outer_done = i; - loop1_inner_done = j; - if (j >= 8) { - b43_phy_write(dev, B43_PHY_RFOVERVAL, - b43_phy_read(dev, B43_PHY_RFOVERVAL) - | 0x30); - trsw_rx = 0x1B; - for (j = j - 8; j < 16; j++) { - b43_phy_write(dev, B43_PHY_RFOVERVAL, - (b43_phy_read(dev, B43_PHY_RFOVERVAL) - & 0xF0FF) | (j << 8)); - b43_phy_write(dev, B43_PHY_PGACTL, - (b43_phy_read(dev, B43_PHY_PGACTL) - & 0x0FFF) | 0xA000); - b43_phy_write(dev, B43_PHY_PGACTL, - b43_phy_read(dev, B43_PHY_PGACTL) - | 0xF000); - udelay(20); - trsw_rx -= 3; - if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) - goto exit_loop2; - } - } else - trsw_rx = 0x18; - exit_loop2: - - if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ - b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); - } - b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); - b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); - b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); - b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); - b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); - b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); - b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); - b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); - b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); - - b43_phy_set_baseband_attenuation(dev, backup_bband); - - b43_radio_write16(dev, 0x52, backup_radio[0]); - b43_radio_write16(dev, 0x43, backup_radio[1]); - b43_radio_write16(dev, 0x7A, backup_radio[2]); - - b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); - udelay(10); - b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); - b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); - b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); - - phy->max_lb_gain = - ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; - phy->trsw_rx_gain = trsw_rx * 2; -} - -static void b43_phy_initg(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - u16 tmp; - - if (phy->rev == 1) - b43_phy_initb5(dev); - else - b43_phy_initb6(dev); - - if (phy->rev >= 2 || phy->gmode) - b43_phy_inita(dev); - - if (phy->rev >= 2) { - b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); - b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); - } - if (phy->rev == 2) { - b43_phy_write(dev, B43_PHY_RFOVER, 0); - b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); - } - if (phy->rev > 5) { - b43_phy_write(dev, B43_PHY_RFOVER, 0x400); - b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); - } - if (phy->gmode || phy->rev >= 2) { - tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); - tmp &= B43_PHYVER_VERSION; - if (tmp == 3 || tmp == 5) { - b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); - b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); - } - if (tmp == 5) { - b43_phy_write(dev, B43_PHY_OFDM(0xCC), - (b43_phy_read(dev, B43_PHY_OFDM(0xCC)) - & 0x00FF) | 0x1F00); - } - } - if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) - b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); - if (phy->radio_rev == 8) { - b43_phy_write(dev, B43_PHY_EXTG(0x01), - b43_phy_read(dev, B43_PHY_EXTG(0x01)) - | 0x80); - b43_phy_write(dev, B43_PHY_OFDM(0x3E), - b43_phy_read(dev, B43_PHY_OFDM(0x3E)) - | 0x4); - } - if (has_loopback_gain(phy)) - b43_calc_loopback_gain(dev); - - if (phy->radio_rev != 8) { - if (phy->initval == 0xFFFF) - phy->initval = b43_radio_init2050(dev); - else - b43_radio_write16(dev, 0x0078, phy->initval); - } - b43_lo_g_init(dev); - if (has_tx_magnification(phy)) { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFF00) - | phy->lo_control->tx_bias | phy-> - lo_control->tx_magn); - } else { - b43_radio_write16(dev, 0x52, - (b43_radio_read16(dev, 0x52) & 0xFFF0) - | phy->lo_control->tx_bias); - } - if (phy->rev >= 6) { - b43_phy_write(dev, B43_PHY_CCK(0x36), - (b43_phy_read(dev, B43_PHY_CCK(0x36)) - & 0x0FFF) | (phy->lo_control-> - tx_bias << 12)); - } - if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); - else - b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); - if (phy->rev < 2) - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); - else - b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); - if (phy->gmode || phy->rev >= 2) { - b43_lo_g_adjust(dev); - b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); - } - - if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { - /* The specs state to update the NRSSI LT with - * the value 0x7FFFFFFF here. I think that is some weird - * compiler optimization in the original driver. - * Essentially, what we do here is resetting all NRSSI LT - * entries to -32 (see the clamp_val() in nrssi_hw_update()) - */ - b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? - b43_calc_nrssi_threshold(dev); - } else if (phy->gmode || phy->rev >= 2) { - if (phy->nrssi[0] == -1000) { - B43_WARN_ON(phy->nrssi[1] != -1000); - b43_calc_nrssi_slope(dev); - } else - b43_calc_nrssi_threshold(dev); - } - if (phy->radio_rev == 8) - b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); - b43_phy_init_pctl(dev); - /* FIXME: The spec says in the following if, the 0 should be replaced - 'if OFDM may not be used in the current locale' - but OFDM is legal everywhere */ - if ((dev->dev->bus->chip_id == 0x4306 - && dev->dev->bus->chip_package == 2) || 0) { - b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0) - & 0xBFFF); - b43_phy_write(dev, B43_PHY_OFDM(0xC3), - b43_phy_read(dev, B43_PHY_OFDM(0xC3)) - & 0x7FFF); - } -} - -/* Set the baseband attenuation value on chip. */ -void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, - u16 baseband_attenuation) -{ - struct b43_phy *phy = &dev->phy; - - if (phy->analog == 0) { - b43_write16(dev, B43_MMIO_PHY0, (b43_read16(dev, B43_MMIO_PHY0) - & 0xFFF0) | - baseband_attenuation); - } else if (phy->analog > 1) { - b43_phy_write(dev, B43_PHY_DACCTL, - (b43_phy_read(dev, B43_PHY_DACCTL) - & 0xFFC3) | (baseband_attenuation << 2)); - } else { - b43_phy_write(dev, B43_PHY_DACCTL, - (b43_phy_read(dev, B43_PHY_DACCTL) - & 0xFF87) | (baseband_attenuation << 3)); - } -} - -/* http://bcm-specs.sipsolutions.net/EstimatePowerOut - * This function converts a TSSI value to dBm in Q5.2 - */ -static s8 b43_phy_estimate_power_out(struct b43_wldev *dev, s8 tssi) -{ - struct b43_phy *phy = &dev->phy; - s8 dbm = 0; - s32 tmp; - - tmp = (phy->tgt_idle_tssi - phy->cur_idle_tssi + tssi); - - switch (phy->type) { - case B43_PHYTYPE_A: - tmp += 0x80; - tmp = clamp_val(tmp, 0x00, 0xFF); - dbm = phy->tssi2dbm[tmp]; - //TODO: There's a FIXME on the specs - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - tmp = clamp_val(tmp, 0x00, 0x3F); - dbm = phy->tssi2dbm[tmp]; - break; - default: - B43_WARN_ON(1); - } - - return dbm; -} - -void b43_put_attenuation_into_ranges(struct b43_wldev *dev, - int *_bbatt, int *_rfatt) -{ - int rfatt = *_rfatt; - int bbatt = *_bbatt; - struct b43_txpower_lo_control *lo = dev->phy.lo_control; - - /* Get baseband and radio attenuation values into their permitted ranges. - * Radio attenuation affects power level 4 times as much as baseband. */ - - /* Range constants */ - const int rf_min = lo->rfatt_list.min_val; - const int rf_max = lo->rfatt_list.max_val; - const int bb_min = lo->bbatt_list.min_val; - const int bb_max = lo->bbatt_list.max_val; - - while (1) { - if (rfatt > rf_max && bbatt > bb_max - 4) - break; /* Can not get it into ranges */ - if (rfatt < rf_min && bbatt < bb_min + 4) - break; /* Can not get it into ranges */ - if (bbatt > bb_max && rfatt > rf_max - 1) - break; /* Can not get it into ranges */ - if (bbatt < bb_min && rfatt < rf_min + 1) - break; /* Can not get it into ranges */ - - if (bbatt > bb_max) { - bbatt -= 4; - rfatt += 1; - continue; - } - if (bbatt < bb_min) { - bbatt += 4; - rfatt -= 1; - continue; - } - if (rfatt > rf_max) { - rfatt -= 1; - bbatt += 4; - continue; - } - if (rfatt < rf_min) { - rfatt += 1; - bbatt -= 4; - continue; - } - break; - } - - *_rfatt = clamp_val(rfatt, rf_min, rf_max); - *_bbatt = clamp_val(bbatt, bb_min, bb_max); -} - -/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */ -void b43_phy_xmitpower(struct b43_wldev *dev) -{ - struct ssb_bus *bus = dev->dev->bus; - struct b43_phy *phy = &dev->phy; - - if (phy->cur_idle_tssi == 0) - return; - if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && - (bus->boardinfo.type == SSB_BOARD_BU4306)) - return; -#ifdef CONFIG_B43_DEBUG - if (phy->manual_txpower_control) - return; -#endif - - switch (phy->type) { - case B43_PHYTYPE_A:{ - - //TODO: Nothing for A PHYs yet :-/ - - break; - } - case B43_PHYTYPE_B: - case B43_PHYTYPE_G:{ - u16 tmp; - s8 v0, v1, v2, v3; - s8 average; - int max_pwr; - int desired_pwr, estimated_pwr, pwr_adjust; - int rfatt_delta, bbatt_delta; - int rfatt, bbatt; - u8 tx_control; - - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - tmp = 0; - - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) { - tmp = - b43_shm_read16(dev, B43_SHM_SHARED, 0x0070); - v0 = (s8) (tmp & 0x00FF); - v1 = (s8) ((tmp & 0xFF00) >> 8); - tmp = - b43_shm_read16(dev, B43_SHM_SHARED, 0x0072); - v2 = (s8) (tmp & 0x00FF); - v3 = (s8) ((tmp & 0xFF00) >> 8); - if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F - || v3 == 0x7F) - return; - v0 = (v0 + 0x20) & 0x3F; - v1 = (v1 + 0x20) & 0x3F; - v2 = (v2 + 0x20) & 0x3F; - v3 = (v3 + 0x20) & 0x3F; - tmp = 1; - } - b43_shm_clear_tssi(dev); - - average = (v0 + v1 + v2 + v3 + 2) / 4; - - if (tmp - && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) & - 0x8)) - average -= 13; - - estimated_pwr = - b43_phy_estimate_power_out(dev, average); - - max_pwr = dev->dev->bus->sprom.maxpwr_bg; - if ((dev->dev->bus->sprom.boardflags_lo - & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G)) - max_pwr -= 0x3; - if (unlikely(max_pwr <= 0)) { - b43warn(dev->wl, - "Invalid max-TX-power value in SPROM.\n"); - max_pwr = 60; /* fake it */ - dev->dev->bus->sprom.maxpwr_bg = max_pwr; - } - - /*TODO: - max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr) - where REG is the max power as per the regulatory domain - */ - - /* Get desired power (in Q5.2) */ - desired_pwr = INT_TO_Q52(phy->power_level); - /* And limit it. max_pwr already is Q5.2 */ - desired_pwr = clamp_val(desired_pwr, 0, max_pwr); - if (b43_debug(dev, B43_DBG_XMITPOWER)) { - b43dbg(dev->wl, - "Current TX power output: " Q52_FMT - " dBm, " "Desired TX power output: " - Q52_FMT " dBm\n", Q52_ARG(estimated_pwr), - Q52_ARG(desired_pwr)); - } - - /* Calculate the adjustment delta. */ - pwr_adjust = desired_pwr - estimated_pwr; - - /* RF attenuation delta. */ - rfatt_delta = ((pwr_adjust + 7) / 8); - /* Lower attenuation => Bigger power output. Negate it. */ - rfatt_delta = -rfatt_delta; - - /* Baseband attenuation delta. */ - bbatt_delta = pwr_adjust / 2; - /* Lower attenuation => Bigger power output. Negate it. */ - bbatt_delta = -bbatt_delta; - /* RF att affects power level 4 times as much as - * Baseband attennuation. Subtract it. */ - bbatt_delta -= 4 * rfatt_delta; - - /* So do we finally need to adjust something? */ - if ((rfatt_delta == 0) && (bbatt_delta == 0)) - return; - - /* Calculate the new attenuation values. */ - bbatt = phy->bbatt.att; - bbatt += bbatt_delta; - rfatt = phy->rfatt.att; - rfatt += rfatt_delta; - - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - tx_control = phy->tx_control; - if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { - if (rfatt <= 1) { - if (tx_control == 0) { - tx_control = - B43_TXCTL_PA2DB | - B43_TXCTL_TXMIX; - rfatt += 2; - bbatt += 2; - } else if (dev->dev->bus->sprom. - boardflags_lo & - B43_BFL_PACTRL) { - bbatt += 4 * (rfatt - 2); - rfatt = 2; - } - } else if (rfatt > 4 && tx_control) { - tx_control = 0; - if (bbatt < 3) { - rfatt -= 3; - bbatt += 2; - } else { - rfatt -= 2; - bbatt -= 2; - } - } - } - /* Save the control values */ - phy->tx_control = tx_control; - b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); - phy->rfatt.att = rfatt; - phy->bbatt.att = bbatt; - - /* Adjust the hardware */ - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, - phy->tx_control); - b43_radio_unlock(dev); - b43_phy_unlock(dev); - break; - } - case B43_PHYTYPE_N: - b43_nphy_xmitpower(dev); - break; - default: - B43_WARN_ON(1); - } -} - -static inline s32 b43_tssi2dbm_ad(s32 num, s32 den) -{ - if (num < 0) - return num / den; - else - return (num + den / 2) / den; -} - -static inline - s8 b43_tssi2dbm_entry(s8 entry[], u8 index, s16 pab0, s16 pab1, s16 pab2) -{ - s32 m1, m2, f = 256, q, delta; - s8 i = 0; - - m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); - m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); - do { - if (i > 15) - return -EINVAL; - q = b43_tssi2dbm_ad(f * 4096 - - b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); - delta = abs(q - f); - f = q; - i++; - } while (delta >= 2); - entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); - return 0; -} - -/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */ -int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - s16 pab0, pab1, pab2; - u8 idx; - s8 *dyn_tssi2dbm; - - if (phy->type == B43_PHYTYPE_A) { - pab0 = (s16) (dev->dev->bus->sprom.pa1b0); - pab1 = (s16) (dev->dev->bus->sprom.pa1b1); - pab2 = (s16) (dev->dev->bus->sprom.pa1b2); - } else { - pab0 = (s16) (dev->dev->bus->sprom.pa0b0); - pab1 = (s16) (dev->dev->bus->sprom.pa0b1); - pab2 = (s16) (dev->dev->bus->sprom.pa0b2); - } - - if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) { - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_b_table; - return 0; - } - - if (pab0 != 0 && pab1 != 0 && pab2 != 0 && - pab0 != -1 && pab1 != -1 && pab2 != -1) { - /* The pabX values are set in SPROM. Use them. */ - if (phy->type == B43_PHYTYPE_A) { - if ((s8) dev->dev->bus->sprom.itssi_a != 0 && - (s8) dev->dev->bus->sprom.itssi_a != -1) - phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.itssi_a); - else - phy->tgt_idle_tssi = 62; - } else { - if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && - (s8) dev->dev->bus->sprom.itssi_bg != -1) - phy->tgt_idle_tssi = - (s8) (dev->dev->bus->sprom.itssi_bg); - else - phy->tgt_idle_tssi = 62; - } - dyn_tssi2dbm = kmalloc(64, GFP_KERNEL); - if (dyn_tssi2dbm == NULL) { - b43err(dev->wl, "Could not allocate memory " - "for tssi2dbm table\n"); - return -ENOMEM; - } - for (idx = 0; idx < 64; idx++) - if (b43_tssi2dbm_entry - (dyn_tssi2dbm, idx, pab0, pab1, pab2)) { - phy->tssi2dbm = NULL; - b43err(dev->wl, "Could not generate " - "tssi2dBm table\n"); - kfree(dyn_tssi2dbm); - return -ENODEV; - } - phy->tssi2dbm = dyn_tssi2dbm; - phy->dyn_tssi_tbl = 1; - } else { - /* pabX values not set in SPROM. */ - switch (phy->type) { - case B43_PHYTYPE_A: - /* APHY needs a generated table. */ - phy->tssi2dbm = NULL; - b43err(dev->wl, "Could not generate tssi2dBm " - "table (wrong SPROM info)!\n"); - return -ENODEV; - case B43_PHYTYPE_B: - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_b_table; - break; - case B43_PHYTYPE_G: - phy->tgt_idle_tssi = 0x34; - phy->tssi2dbm = b43_tssi2dbm_g_table; - break; - } - } - - return 0; -} - -int b43_phy_init(struct b43_wldev *dev) -{ - struct b43_phy *phy = &dev->phy; - bool unsupported = 0; - int err = 0; - - switch (phy->type) { - case B43_PHYTYPE_A: - if (phy->rev == 2 || phy->rev == 3) - b43_phy_inita(dev); - else - unsupported = 1; - break; - case B43_PHYTYPE_G: - b43_phy_initg(dev); - break; - case B43_PHYTYPE_N: - err = b43_phy_initn(dev); - break; - default: - unsupported = 1; - } - if (unsupported) - b43err(dev->wl, "Unknown PHYTYPE found\n"); - - return err; -} - -void b43_set_rx_antenna(struct b43_wldev *dev, int antenna) -{ - struct b43_phy *phy = &dev->phy; - u64 hf; - u16 tmp; - int autodiv = 0; - - if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) - autodiv = 1; - - hf = b43_hf_read(dev); - hf &= ~B43_HF_ANTDIVHELP; - b43_hf_write(dev, hf); - - switch (phy->type) { - case B43_PHYTYPE_A: - case B43_PHYTYPE_G: - tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); - tmp &= ~B43_PHY_BBANDCFG_RXANT; - tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) - << B43_PHY_BBANDCFG_RXANT_SHIFT; - b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); - - if (autodiv) { - tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); - if (antenna == B43_ANTENNA_AUTO0) - tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; - else - tmp |= B43_PHY_ANTDWELL_AUTODIV1; - b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); - } - if (phy->type == B43_PHYTYPE_G) { - tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); - if (autodiv) - tmp |= B43_PHY_ANTWRSETT_ARXDIV; - else - tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; - b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); - if (phy->rev >= 2) { - tmp = b43_phy_read(dev, B43_PHY_OFDM61); - tmp |= B43_PHY_OFDM61_10; - b43_phy_write(dev, B43_PHY_OFDM61, tmp); - - tmp = - b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK); - tmp = (tmp & 0xFF00) | 0x15; - b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK, - tmp); - - if (phy->rev == 2) { - b43_phy_write(dev, B43_PHY_ADIVRELATED, - 8); - } else { - tmp = - b43_phy_read(dev, - B43_PHY_ADIVRELATED); - tmp = (tmp & 0xFF00) | 8; - b43_phy_write(dev, B43_PHY_ADIVRELATED, - tmp); - } - } - if (phy->rev >= 6) - b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); - } else { - if (phy->rev < 3) { - tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); - tmp = (tmp & 0xFF00) | 0x24; - b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); - } else { - tmp = b43_phy_read(dev, B43_PHY_OFDM61); - tmp |= 0x10; - b43_phy_write(dev, B43_PHY_OFDM61, tmp); - if (phy->analog == 3) { - b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, - 0x1D); - b43_phy_write(dev, B43_PHY_ADIVRELATED, - 8); - } else { - b43_phy_write(dev, B43_PHY_CLIPPWRDOWNT, - 0x3A); - tmp = - b43_phy_read(dev, - B43_PHY_ADIVRELATED); - tmp = (tmp & 0xFF00) | 8; - b43_phy_write(dev, B43_PHY_ADIVRELATED, - tmp); - } - } - } - break; - case B43_PHYTYPE_B: - tmp = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); - tmp &= ~B43_PHY_BBANDCFG_RXANT; - tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) - << B43_PHY_BBANDCFG_RXANT_SHIFT; - b43_phy_write(dev, B43_PHY_CCKBBANDCFG, tmp); - break; - case B43_PHYTYPE_N: - b43_nphy_set_rxantenna(dev, antenna); - break; - default: - B43_WARN_ON(1); - } - - hf |= B43_HF_ANTDIVHELP; - b43_hf_write(dev, hf); -} - -/* Get the freq, as it has to be written to the device. */ -static inline u16 channel2freq_bg(u8 channel) -{ - B43_WARN_ON(!(channel >= 1 && channel <= 14)); - - return b43_radio_channel_codes_bg[channel - 1]; -} - -/* Get the freq, as it has to be written to the device. */ -static inline u16 channel2freq_a(u8 channel) -{ - B43_WARN_ON(channel > 200); - - return (5000 + 5 * channel); -} - -void b43_radio_lock(struct b43_wldev *dev) -{ - u32 macctl; - - macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); - macctl |= B43_MACCTL_RADIOLOCK; - b43_write32(dev, B43_MMIO_MACCTL, macctl); - /* Commit the write and wait for the device - * to exit any radio register access. */ - b43_read32(dev, B43_MMIO_MACCTL); - udelay(10); -} - -void b43_radio_unlock(struct b43_wldev *dev) -{ - u32 macctl; - - /* Commit any write */ - b43_read16(dev, B43_MMIO_PHY_VER); - /* unlock */ - macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); - macctl &= ~B43_MACCTL_RADIOLOCK; - b43_write32(dev, B43_MMIO_MACCTL, macctl); -} - -u16 b43_radio_read16(struct b43_wldev *dev, u16 offset) -{ - struct b43_phy *phy = &dev->phy; - - /* Offset 1 is a 32-bit register. */ - B43_WARN_ON(offset == 1); - - switch (phy->type) { - case B43_PHYTYPE_A: - offset |= 0x40; - break; - case B43_PHYTYPE_B: - if (phy->radio_ver == 0x2053) { - if (offset < 0x70) - offset += 0x80; - else if (offset < 0x80) - offset += 0x70; - } else if (phy->radio_ver == 0x2050) { - offset |= 0x80; - } else - B43_WARN_ON(1); - break; - case B43_PHYTYPE_G: - offset |= 0x80; - break; - case B43_PHYTYPE_N: - offset |= 0x100; - break; - case B43_PHYTYPE_LP: - /* No adjustment required. */ - break; - default: - B43_WARN_ON(1); - } - - b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset); - return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); -} - -void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val) -{ - /* Offset 1 is a 32-bit register. */ - B43_WARN_ON(offset == 1); - - b43_write16(dev, B43_MMIO_RADIO_CONTROL, offset); - b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, val); -} - -void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) -{ - b43_radio_write16(dev, offset, - b43_radio_read16(dev, offset) & mask); -} - -void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) -{ - b43_radio_write16(dev, offset, - b43_radio_read16(dev, offset) | set); -} - -void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) -{ - b43_radio_write16(dev, offset, - (b43_radio_read16(dev, offset) & mask) | set); -} - static void b43_set_all_gains(struct b43_wldev *dev, s16 first, s16 second, s16 third) { @@ -2134,108 +382,10 @@ static void b43_set_original_gains(struct b43_wldev *dev) b43_dummy_transmission(dev); } -/* Synthetic PU workaround */ -static void b43_synth_pu_workaround(struct b43_wldev *dev, u8 channel) -{ - struct b43_phy *phy = &dev->phy; - - might_sleep(); - - if (phy->radio_ver != 0x2050 || phy->radio_rev >= 6) { - /* We do not need the workaround. */ - return; - } - - if (channel <= 10) { - b43_write16(dev, B43_MMIO_CHANNEL, - channel2freq_bg(channel + 4)); - } else { - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(1)); - } - msleep(1); - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); -} - -u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel) -{ - struct b43_phy *phy = &dev->phy; - u8 ret = 0; - u16 saved, rssi, temp; - int i, j = 0; - - saved = b43_phy_read(dev, 0x0403); - b43_radio_selectchannel(dev, channel, 0); - b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); - if (phy->aci_hw_rssi) - rssi = b43_phy_read(dev, 0x048A) & 0x3F; - else - rssi = saved & 0x3F; - /* clamp temp to signed 5bit */ - if (rssi > 32) - rssi -= 64; - for (i = 0; i < 100; i++) { - temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; - if (temp > 32) - temp -= 64; - if (temp < rssi) - j++; - if (j >= 20) - ret = 1; - } - b43_phy_write(dev, 0x0403, saved); - - return ret; -} - -u8 b43_radio_aci_scan(struct b43_wldev * dev) -{ - struct b43_phy *phy = &dev->phy; - u8 ret[13]; - unsigned int channel = phy->channel; - unsigned int i, j, start, end; - - if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) - return 0; - - b43_phy_lock(dev); - b43_radio_lock(dev); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); - b43_set_all_gains(dev, 3, 8, 1); - - start = (channel - 5 > 0) ? channel - 5 : 1; - end = (channel + 5 < 14) ? channel + 5 : 13; - - for (i = start; i <= end; i++) { - if (abs(channel - i) > 2) - ret[i - 1] = b43_radio_aci_detect(dev, i); - } - b43_radio_selectchannel(dev, channel, 0); - b43_phy_write(dev, 0x0802, - (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003); - b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); - b43_set_original_gains(dev); - for (i = 0; i < 13; i++) { - if (!ret[i]) - continue; - end = (i + 5 < 13) ? i + 5 : 13; - for (j = i; j < end; j++) - ret[j] = 1; - } - b43_radio_unlock(dev); - b43_phy_unlock(dev); - - return ret[channel - 1]; -} - /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val) { b43_phy_write(dev, B43_PHY_NRSSILT_CTRL, offset); - mmiowb(); b43_phy_write(dev, B43_PHY_NRSSILT_DATA, (u16) val); } @@ -2267,17 +417,17 @@ void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val) /* http://bcm-specs.sipsolutions.net/NRSSILookupTable */ void b43_nrssi_mem_update(struct b43_wldev *dev) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; s16 i, delta; s32 tmp; - delta = 0x1F - phy->nrssi[0]; + delta = 0x1F - gphy->nrssi[0]; for (i = 0; i < 64; i++) { - tmp = (i - delta) * phy->nrssislope; + tmp = (i - delta) * gphy->nrssislope; tmp /= 0x10000; tmp += 0x3A; tmp = clamp_val(tmp, 0, 0x3F); - phy->nrssi_lt[i] = tmp; + gphy->nrssi_lt[i] = tmp; } } @@ -2442,347 +592,230 @@ static void b43_calc_nrssi_offset(struct b43_wldev *dev) void b43_calc_nrssi_slope(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 backup[18] = { 0 }; u16 tmp; s16 nrssi0, nrssi1; - switch (phy->type) { - case B43_PHYTYPE_B: - backup[0] = b43_radio_read16(dev, 0x007A); - backup[1] = b43_radio_read16(dev, 0x0052); - backup[2] = b43_radio_read16(dev, 0x0043); - backup[3] = b43_phy_read(dev, 0x0030); - backup[4] = b43_phy_read(dev, 0x0026); - backup[5] = b43_phy_read(dev, 0x0015); - backup[6] = b43_phy_read(dev, 0x002A); - backup[7] = b43_phy_read(dev, 0x0020); - backup[8] = b43_phy_read(dev, 0x005A); - backup[9] = b43_phy_read(dev, 0x0059); - backup[10] = b43_phy_read(dev, 0x0058); - backup[11] = b43_read16(dev, 0x03E2); - backup[12] = b43_read16(dev, 0x03E6); - backup[13] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); - - tmp = b43_radio_read16(dev, 0x007A); - tmp &= (phy->rev >= 5) ? 0x007F : 0x000F; - b43_radio_write16(dev, 0x007A, tmp); - b43_phy_write(dev, 0x0030, 0x00FF); - b43_write16(dev, 0x03EC, 0x7F7F); - b43_phy_write(dev, 0x0026, 0x0000); - b43_phy_write(dev, 0x0015, b43_phy_read(dev, 0x0015) | 0x0020); - b43_phy_write(dev, 0x002A, 0x08A3); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0080); + B43_WARN_ON(phy->type != B43_PHYTYPE_G); - nrssi0 = (s16) b43_phy_read(dev, 0x0027); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x007F); - if (phy->rev >= 2) { - b43_write16(dev, 0x03E6, 0x0040); - } else if (phy->rev == 0) { - b43_write16(dev, 0x03E6, 0x0122); - } else { - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, - B43_MMIO_CHANNEL_EXT) & 0x2000); - } - b43_phy_write(dev, 0x0020, 0x3F3F); - b43_phy_write(dev, 0x0015, 0xF330); - b43_radio_write16(dev, 0x005A, 0x0060); - b43_radio_write16(dev, 0x0043, - b43_radio_read16(dev, 0x0043) & 0x00F0); - b43_phy_write(dev, 0x005A, 0x0480); - b43_phy_write(dev, 0x0059, 0x0810); - b43_phy_write(dev, 0x0058, 0x000D); - udelay(20); - - nrssi1 = (s16) b43_phy_read(dev, 0x0027); - b43_phy_write(dev, 0x0030, backup[3]); - b43_radio_write16(dev, 0x007A, backup[0]); - b43_write16(dev, 0x03E2, backup[11]); - b43_phy_write(dev, 0x0026, backup[4]); - b43_phy_write(dev, 0x0015, backup[5]); - b43_phy_write(dev, 0x002A, backup[6]); - b43_synth_pu_workaround(dev, phy->channel); - if (phy->rev != 0) - b43_write16(dev, 0x03F4, backup[13]); - - b43_phy_write(dev, 0x0020, backup[7]); - b43_phy_write(dev, 0x005A, backup[8]); - b43_phy_write(dev, 0x0059, backup[9]); - b43_phy_write(dev, 0x0058, backup[10]); - b43_radio_write16(dev, 0x0052, backup[1]); - b43_radio_write16(dev, 0x0043, backup[2]); - - if (nrssi0 == nrssi1) - phy->nrssislope = 0x00010000; - else - phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); - - if (nrssi0 <= -4) { - phy->nrssi[0] = nrssi0; - phy->nrssi[1] = nrssi1; - } - break; - case B43_PHYTYPE_G: - if (phy->radio_rev >= 9) - return; - if (phy->radio_rev == 8) - b43_calc_nrssi_offset(dev); + if (phy->radio_rev >= 9) + return; + if (phy->radio_rev == 8) + b43_calc_nrssi_offset(dev); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); - b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); - backup[7] = b43_read16(dev, 0x03E2); - b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); - backup[0] = b43_radio_read16(dev, 0x007A); - backup[1] = b43_radio_read16(dev, 0x0052); - backup[2] = b43_radio_read16(dev, 0x0043); - backup[3] = b43_phy_read(dev, 0x0015); - backup[4] = b43_phy_read(dev, 0x005A); - backup[5] = b43_phy_read(dev, 0x0059); - backup[6] = b43_phy_read(dev, 0x0058); - backup[8] = b43_read16(dev, 0x03E6); - backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); - if (phy->rev >= 3) { - backup[10] = b43_phy_read(dev, 0x002E); - backup[11] = b43_phy_read(dev, 0x002F); - backup[12] = b43_phy_read(dev, 0x080F); - backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); - backup[14] = b43_phy_read(dev, 0x0801); - backup[15] = b43_phy_read(dev, 0x0060); - backup[16] = b43_phy_read(dev, 0x0014); - backup[17] = b43_phy_read(dev, 0x0478); - b43_phy_write(dev, 0x002E, 0); - b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); - switch (phy->rev) { - case 4: - case 6: - case 7: - b43_phy_write(dev, 0x0478, - b43_phy_read(dev, 0x0478) - | 0x0100); - b43_phy_write(dev, 0x0801, - b43_phy_read(dev, 0x0801) - | 0x0040); - break; - case 3: - case 5: - b43_phy_write(dev, 0x0801, - b43_phy_read(dev, 0x0801) - & 0xFFBF); - break; - } - b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); + backup[7] = b43_read16(dev, 0x03E2); + b43_write16(dev, 0x03E2, b43_read16(dev, 0x03E2) | 0x8000); + backup[0] = b43_radio_read16(dev, 0x007A); + backup[1] = b43_radio_read16(dev, 0x0052); + backup[2] = b43_radio_read16(dev, 0x0043); + backup[3] = b43_phy_read(dev, 0x0015); + backup[4] = b43_phy_read(dev, 0x005A); + backup[5] = b43_phy_read(dev, 0x0059); + backup[6] = b43_phy_read(dev, 0x0058); + backup[8] = b43_read16(dev, 0x03E6); + backup[9] = b43_read16(dev, B43_MMIO_CHANNEL_EXT); + if (phy->rev >= 3) { + backup[10] = b43_phy_read(dev, 0x002E); + backup[11] = b43_phy_read(dev, 0x002F); + backup[12] = b43_phy_read(dev, 0x080F); + backup[13] = b43_phy_read(dev, B43_PHY_G_LO_CONTROL); + backup[14] = b43_phy_read(dev, 0x0801); + backup[15] = b43_phy_read(dev, 0x0060); + backup[16] = b43_phy_read(dev, 0x0014); + backup[17] = b43_phy_read(dev, 0x0478); + b43_phy_write(dev, 0x002E, 0); + b43_phy_write(dev, B43_PHY_G_LO_CONTROL, 0); + switch (phy->rev) { + case 4: + case 6: + case 7: + b43_phy_write(dev, 0x0478, + b43_phy_read(dev, 0x0478) + | 0x0100); + b43_phy_write(dev, 0x0801, + b43_phy_read(dev, 0x0801) | 0x0040); - b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014) - | 0x0200); - } - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0070); - b43_set_all_gains(dev, 0, 8, 0); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x00F7); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0811, - (b43_phy_read(dev, 0x0811) & 0xFFCF) | - 0x0030); - b43_phy_write(dev, 0x0812, - (b43_phy_read(dev, 0x0812) & 0xFFCF) | - 0x0010); + break; + case 3: + case 5: + b43_phy_write(dev, 0x0801, + b43_phy_read(dev, 0x0801) + & 0xFFBF); + break; } - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x0080); - udelay(20); + b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) + | 0x0040); + b43_phy_write(dev, 0x0014, b43_phy_read(dev, 0x0014) + | 0x0200); + } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0070); + b43_set_all_gains(dev, 0, 8, 0); + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) & 0x00F7); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0811, + (b43_phy_read(dev, 0x0811) & 0xFFCF) | + 0x0030); + b43_phy_write(dev, 0x0812, + (b43_phy_read(dev, 0x0812) & 0xFFCF) | + 0x0010); + } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0080); + udelay(20); - nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); - if (nrssi0 >= 0x0020) - nrssi0 -= 0x0040; + nrssi0 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); + if (nrssi0 >= 0x0020) + nrssi0 -= 0x0040; - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) & 0x007F); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003) - & 0xFF9F) | 0x0040); - } - - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - | 0x2000); - b43_radio_write16(dev, 0x007A, - b43_radio_read16(dev, 0x007A) | 0x000F); - b43_phy_write(dev, 0x0015, 0xF330); - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0812, - (b43_phy_read(dev, 0x0812) & 0xFFCF) | - 0x0020); - b43_phy_write(dev, 0x0811, - (b43_phy_read(dev, 0x0811) & 0xFFCF) | - 0x0020); - } + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) & 0x007F); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0003, (b43_phy_read(dev, 0x0003) + & 0xFF9F) | 0x0040); + } - b43_set_all_gains(dev, 3, 0, 1); - if (phy->radio_rev == 8) { - b43_radio_write16(dev, 0x0043, 0x001F); - } else { - tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; - b43_radio_write16(dev, 0x0052, tmp | 0x0060); - tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; - b43_radio_write16(dev, 0x0043, tmp | 0x0009); - } - b43_phy_write(dev, 0x005A, 0x0480); - b43_phy_write(dev, 0x0059, 0x0810); - b43_phy_write(dev, 0x0058, 0x000D); - udelay(20); - nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); - if (nrssi1 >= 0x0020) - nrssi1 -= 0x0040; - if (nrssi0 == nrssi1) - phy->nrssislope = 0x00010000; - else - phy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); - if (nrssi0 >= -4) { - phy->nrssi[0] = nrssi1; - phy->nrssi[1] = nrssi0; - } - if (phy->rev >= 3) { - b43_phy_write(dev, 0x002E, backup[10]); - b43_phy_write(dev, 0x002F, backup[11]); - b43_phy_write(dev, 0x080F, backup[12]); - b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); - } - if (phy->rev >= 2) { - b43_phy_write(dev, 0x0812, - b43_phy_read(dev, 0x0812) & 0xFFCF); - b43_phy_write(dev, 0x0811, - b43_phy_read(dev, 0x0811) & 0xFFCF); - } + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + | 0x2000); + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x000F); + b43_phy_write(dev, 0x0015, 0xF330); + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0812, + (b43_phy_read(dev, 0x0812) & 0xFFCF) | + 0x0020); + b43_phy_write(dev, 0x0811, + (b43_phy_read(dev, 0x0811) & 0xFFCF) | + 0x0020); + } - b43_radio_write16(dev, 0x007A, backup[0]); - b43_radio_write16(dev, 0x0052, backup[1]); - b43_radio_write16(dev, 0x0043, backup[2]); - b43_write16(dev, 0x03E2, backup[7]); - b43_write16(dev, 0x03E6, backup[8]); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); - b43_phy_write(dev, 0x0015, backup[3]); - b43_phy_write(dev, 0x005A, backup[4]); - b43_phy_write(dev, 0x0059, backup[5]); - b43_phy_write(dev, 0x0058, backup[6]); - b43_synth_pu_workaround(dev, phy->channel); - b43_phy_write(dev, 0x0802, - b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002)); - b43_set_original_gains(dev); - b43_phy_write(dev, B43_PHY_G_CRS, - b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); - if (phy->rev >= 3) { - b43_phy_write(dev, 0x0801, backup[14]); - b43_phy_write(dev, 0x0060, backup[15]); - b43_phy_write(dev, 0x0014, backup[16]); - b43_phy_write(dev, 0x0478, backup[17]); - } - b43_nrssi_mem_update(dev); - b43_calc_nrssi_threshold(dev); - break; - default: - B43_WARN_ON(1); + b43_set_all_gains(dev, 3, 0, 1); + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x0043, 0x001F); + } else { + tmp = b43_radio_read16(dev, 0x0052) & 0xFF0F; + b43_radio_write16(dev, 0x0052, tmp | 0x0060); + tmp = b43_radio_read16(dev, 0x0043) & 0xFFF0; + b43_radio_write16(dev, 0x0043, tmp | 0x0009); + } + b43_phy_write(dev, 0x005A, 0x0480); + b43_phy_write(dev, 0x0059, 0x0810); + b43_phy_write(dev, 0x0058, 0x000D); + udelay(20); + nrssi1 = (s16) ((b43_phy_read(dev, 0x047F) >> 8) & 0x003F); + if (nrssi1 >= 0x0020) + nrssi1 -= 0x0040; + if (nrssi0 == nrssi1) + gphy->nrssislope = 0x00010000; + else + gphy->nrssislope = 0x00400000 / (nrssi0 - nrssi1); + if (nrssi0 >= -4) { + gphy->nrssi[0] = nrssi1; + gphy->nrssi[1] = nrssi0; + } + if (phy->rev >= 3) { + b43_phy_write(dev, 0x002E, backup[10]); + b43_phy_write(dev, 0x002F, backup[11]); + b43_phy_write(dev, 0x080F, backup[12]); + b43_phy_write(dev, B43_PHY_G_LO_CONTROL, backup[13]); } + if (phy->rev >= 2) { + b43_phy_write(dev, 0x0812, + b43_phy_read(dev, 0x0812) & 0xFFCF); + b43_phy_write(dev, 0x0811, + b43_phy_read(dev, 0x0811) & 0xFFCF); + } + + b43_radio_write16(dev, 0x007A, backup[0]); + b43_radio_write16(dev, 0x0052, backup[1]); + b43_radio_write16(dev, 0x0043, backup[2]); + b43_write16(dev, 0x03E2, backup[7]); + b43_write16(dev, 0x03E6, backup[8]); + b43_write16(dev, B43_MMIO_CHANNEL_EXT, backup[9]); + b43_phy_write(dev, 0x0015, backup[3]); + b43_phy_write(dev, 0x005A, backup[4]); + b43_phy_write(dev, 0x0059, backup[5]); + b43_phy_write(dev, 0x0058, backup[6]); + b43_synth_pu_workaround(dev, phy->channel); + b43_phy_write(dev, 0x0802, + b43_phy_read(dev, 0x0802) | (0x0001 | 0x0002)); + b43_set_original_gains(dev); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); + if (phy->rev >= 3) { + b43_phy_write(dev, 0x0801, backup[14]); + b43_phy_write(dev, 0x0060, backup[15]); + b43_phy_write(dev, 0x0014, backup[16]); + b43_phy_write(dev, 0x0478, backup[17]); + } + b43_nrssi_mem_update(dev); + b43_calc_nrssi_threshold(dev); } -void b43_calc_nrssi_threshold(struct b43_wldev *dev) +static void b43_calc_nrssi_threshold(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - s32 threshold; + struct b43_phy_g *gphy = phy->g; s32 a, b; s16 tmp16; u16 tmp_u16; - switch (phy->type) { - case B43_PHYTYPE_B:{ - if (phy->radio_ver != 0x2050) - return; - if (! - (dev->dev->bus->sprom. - boardflags_lo & B43_BFL_RSSI)) - return; - - if (phy->radio_rev >= 6) { - threshold = - (phy->nrssi[1] - phy->nrssi[0]) * 32; - threshold += 20 * (phy->nrssi[0] + 1); - threshold /= 40; - } else - threshold = phy->nrssi[1] - 5; - - threshold = clamp_val(threshold, 0, 0x3E); - b43_phy_read(dev, 0x0020); /* dummy read */ - b43_phy_write(dev, 0x0020, - (((u16) threshold) << 8) | 0x001C); - - if (phy->radio_rev >= 6) { - b43_phy_write(dev, 0x0087, 0x0E0D); - b43_phy_write(dev, 0x0086, 0x0C0B); - b43_phy_write(dev, 0x0085, 0x0A09); - b43_phy_write(dev, 0x0084, 0x0808); - b43_phy_write(dev, 0x0083, 0x0808); - b43_phy_write(dev, 0x0082, 0x0604); - b43_phy_write(dev, 0x0081, 0x0302); - b43_phy_write(dev, 0x0080, 0x0100); - } - break; + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + if (!phy->gmode || + !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + tmp16 = b43_nrssi_hw_read(dev, 0x20); + if (tmp16 >= 0x20) + tmp16 -= 0x40; + if (tmp16 < 3) { + b43_phy_write(dev, 0x048A, + (b43_phy_read(dev, 0x048A) + & 0xF000) | 0x09EB); + } else { + b43_phy_write(dev, 0x048A, + (b43_phy_read(dev, 0x048A) + & 0xF000) | 0x0AED); } - case B43_PHYTYPE_G: - if (!phy->gmode || - !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { - tmp16 = b43_nrssi_hw_read(dev, 0x20); - if (tmp16 >= 0x20) - tmp16 -= 0x40; - if (tmp16 < 3) { - b43_phy_write(dev, 0x048A, - (b43_phy_read(dev, 0x048A) - & 0xF000) | 0x09EB); - } else { - b43_phy_write(dev, 0x048A, - (b43_phy_read(dev, 0x048A) - & 0xF000) | 0x0AED); - } + } else { + if (gphy->interfmode == B43_INTERFMODE_NONWLAN) { + a = 0xE; + b = 0xA; + } else if (!gphy->aci_wlan_automatic && gphy->aci_enable) { + a = 0x13; + b = 0x12; } else { - if (phy->interfmode == B43_INTERFMODE_NONWLAN) { - a = 0xE; - b = 0xA; - } else if (!phy->aci_wlan_automatic && phy->aci_enable) { - a = 0x13; - b = 0x12; - } else { - a = 0xE; - b = 0x11; - } - - a = a * (phy->nrssi[1] - phy->nrssi[0]); - a += (phy->nrssi[0] << 6); - if (a < 32) - a += 31; - else - a += 32; - a = a >> 6; - a = clamp_val(a, -31, 31); - - b = b * (phy->nrssi[1] - phy->nrssi[0]); - b += (phy->nrssi[0] << 6); - if (b < 32) - b += 31; - else - b += 32; - b = b >> 6; - b = clamp_val(b, -31, 31); - - tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; - tmp_u16 |= ((u32) b & 0x0000003F); - tmp_u16 |= (((u32) a & 0x0000003F) << 6); - b43_phy_write(dev, 0x048A, tmp_u16); + a = 0xE; + b = 0x11; } - break; - default: - B43_WARN_ON(1); + + a = a * (gphy->nrssi[1] - gphy->nrssi[0]); + a += (gphy->nrssi[0] << 6); + if (a < 32) + a += 31; + else + a += 32; + a = a >> 6; + a = clamp_val(a, -31, 31); + + b = b * (gphy->nrssi[1] - gphy->nrssi[0]); + b += (gphy->nrssi[0] << 6); + if (b < 32) + b += 31; + else + b += 32; + b = b >> 6; + b = clamp_val(b, -31, 31); + + tmp_u16 = b43_phy_read(dev, 0x048A) & 0xF000; + tmp_u16 |= ((u32) b & 0x0000003F); + tmp_u16 |= (((u32) a & 0x0000003F) << 6); + b43_phy_write(dev, 0x048A, tmp_u16); } } @@ -2860,9 +893,10 @@ static void b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; u16 tmp, flipped; size_t stackidx = 0; - u32 *stack = phy->interfstack; + u32 *stack = gphy->interfstack; switch (mode) { case B43_INTERFMODE_NONWLAN: @@ -2928,7 +962,7 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) if (b43_phy_read(dev, 0x0033) & 0x0800) break; - phy->aci_enable = 1; + gphy->aci_enable = 1; phy_stacksave(B43_PHY_RADIO_BITFIELD); phy_stacksave(B43_PHY_G_CRS); @@ -3064,7 +1098,8 @@ static void b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) { struct b43_phy *phy = &dev->phy; - u32 *stack = phy->interfstack; + struct b43_phy_g *gphy = phy->g; + u32 *stack = gphy->interfstack; switch (mode) { case B43_INTERFMODE_NONWLAN: @@ -3103,7 +1138,7 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) if (!(b43_phy_read(dev, 0x0033) & 0x0800)) break; - phy->aci_enable = 0; + gphy->aci_enable = 0; phy_stackrestore(B43_PHY_RADIO_BITFIELD); phy_stackrestore(B43_PHY_G_CRS); @@ -3153,47 +1188,6 @@ b43_radio_interference_mitigation_disable(struct b43_wldev *dev, int mode) #undef ofdmtab_stacksave #undef ofdmtab_stackrestore -int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode) -{ - struct b43_phy *phy = &dev->phy; - int currentmode; - - if ((phy->type != B43_PHYTYPE_G) || (phy->rev == 0) || (!phy->gmode)) - return -ENODEV; - - phy->aci_wlan_automatic = 0; - switch (mode) { - case B43_INTERFMODE_AUTOWLAN: - phy->aci_wlan_automatic = 1; - if (phy->aci_enable) - mode = B43_INTERFMODE_MANUALWLAN; - else - mode = B43_INTERFMODE_NONE; - break; - case B43_INTERFMODE_NONE: - case B43_INTERFMODE_NONWLAN: - case B43_INTERFMODE_MANUALWLAN: - break; - default: - return -EINVAL; - } - - currentmode = phy->interfmode; - if (currentmode == mode) - return 0; - if (currentmode != B43_INTERFMODE_NONE) - b43_radio_interference_mitigation_disable(dev, currentmode); - - if (mode == B43_INTERFMODE_NONE) { - phy->aci_enable = 0; - phy->aci_hw_rssi = 0; - } else - b43_radio_interference_mitigation_enable(dev, mode); - phy->interfmode = mode; - - return 0; -} - static u16 b43_radio_core_calibration_value(struct b43_wldev *dev) { u16 reg, index, ret; @@ -3219,13 +1213,14 @@ static u16 radio2050_rfover_val(struct b43_wldev *dev, u16 phy_register, unsigned int lpd) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; struct ssb_sprom *sprom = &(dev->dev->bus->sprom); if (!phy->gmode) return 0; if (has_loopback_gain(phy)) { - int max_lb_gain = phy->max_lb_gain; + int max_lb_gain = gphy->max_lb_gain; u16 extlna; u16 i; @@ -3606,301 +1601,1682 @@ u16 b43_radio_init2050(struct b43_wldev *dev) return ret; } -void b43_radio_init2060(struct b43_wldev *dev) +static void b43_phy_initb5(struct b43_wldev *dev) { - int err; + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 offset, value; + u8 old_channel; - b43_radio_write16(dev, 0x0004, 0x00C0); - b43_radio_write16(dev, 0x0005, 0x0008); - b43_radio_write16(dev, 0x0009, 0x0040); - b43_radio_write16(dev, 0x0005, 0x00AA); - b43_radio_write16(dev, 0x0032, 0x008F); - b43_radio_write16(dev, 0x0006, 0x008F); - b43_radio_write16(dev, 0x0034, 0x008F); - b43_radio_write16(dev, 0x002C, 0x0007); - b43_radio_write16(dev, 0x0082, 0x0080); - b43_radio_write16(dev, 0x0080, 0x0000); - b43_radio_write16(dev, 0x003F, 0x00DA); - b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0010); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0020); - msleep(1); /* delay 400usec */ - - b43_radio_write16(dev, 0x0081, - (b43_radio_read16(dev, 0x0081) & ~0x0020) | 0x0010); - msleep(1); /* delay 400usec */ - - b43_radio_write16(dev, 0x0005, - (b43_radio_read16(dev, 0x0005) & ~0x0008) | 0x0008); - b43_radio_write16(dev, 0x0085, b43_radio_read16(dev, 0x0085) & ~0x0010); - b43_radio_write16(dev, 0x0005, b43_radio_read16(dev, 0x0005) & ~0x0008); - b43_radio_write16(dev, 0x0081, b43_radio_read16(dev, 0x0081) & ~0x0040); - b43_radio_write16(dev, 0x0081, - (b43_radio_read16(dev, 0x0081) & ~0x0040) | 0x0040); - b43_radio_write16(dev, 0x0005, - (b43_radio_read16(dev, 0x0081) & ~0x0008) | 0x0008); - b43_phy_write(dev, 0x0063, 0xDDC6); - b43_phy_write(dev, 0x0069, 0x07BE); - b43_phy_write(dev, 0x006A, 0x0000); - - err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_A, 0); - B43_WARN_ON(err); + if (phy->analog == 1) { + b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) + | 0x0050); + } + if ((bus->boardinfo.vendor != SSB_BOARDVENDOR_BCM) && + (bus->boardinfo.type != SSB_BOARD_BU4306)) { + value = 0x2120; + for (offset = 0x00A8; offset < 0x00C7; offset++) { + b43_phy_write(dev, offset, value); + value += 0x202; + } + } + b43_phy_write(dev, 0x0035, (b43_phy_read(dev, 0x0035) & 0xF0FF) + | 0x0700); + if (phy->radio_ver == 0x2050) + b43_phy_write(dev, 0x0038, 0x0667); - msleep(1); + if (phy->gmode || phy->rev >= 2) { + if (phy->radio_ver == 0x2050) { + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) + | 0x0020); + b43_radio_write16(dev, 0x0051, + b43_radio_read16(dev, 0x0051) + | 0x0004); + } + b43_write16(dev, B43_MMIO_PHY_RADIO, 0x0000); + + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); + b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); + + b43_phy_write(dev, 0x001C, 0x186A); + + b43_phy_write(dev, 0x0013, + (b43_phy_read(dev, 0x0013) & 0x00FF) | 0x1900); + b43_phy_write(dev, 0x0035, + (b43_phy_read(dev, 0x0035) & 0xFFC0) | 0x0064); + b43_phy_write(dev, 0x005D, + (b43_phy_read(dev, 0x005D) & 0xFF80) | 0x000A); + } + + if (dev->bad_frames_preempt) { + b43_phy_write(dev, B43_PHY_RADIO_BITFIELD, + b43_phy_read(dev, + B43_PHY_RADIO_BITFIELD) | (1 << 11)); + } + + if (phy->analog == 1) { + b43_phy_write(dev, 0x0026, 0xCE00); + b43_phy_write(dev, 0x0021, 0x3763); + b43_phy_write(dev, 0x0022, 0x1BC3); + b43_phy_write(dev, 0x0023, 0x06F9); + b43_phy_write(dev, 0x0024, 0x037E); + } else + b43_phy_write(dev, 0x0026, 0xCC00); + b43_phy_write(dev, 0x0030, 0x00C6); + b43_write16(dev, 0x03EC, 0x3F22); + + if (phy->analog == 1) + b43_phy_write(dev, 0x0020, 0x3E1C); + else + b43_phy_write(dev, 0x0020, 0x301C); + + if (phy->analog == 0) + b43_write16(dev, 0x03E4, 0x3000); + + old_channel = phy->channel; + /* Force to channel 7, even if not supported. */ + b43_gphy_channel_switch(dev, 7, 0); + + if (phy->radio_ver != 0x2050) { + b43_radio_write16(dev, 0x0075, 0x0080); + b43_radio_write16(dev, 0x0079, 0x0081); + } + + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x0050, 0x0023); + + if (phy->radio_ver == 0x2050) { + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x005A, 0x0070); + } + + b43_radio_write16(dev, 0x005B, 0x007B); + b43_radio_write16(dev, 0x005C, 0x00B0); + + b43_radio_write16(dev, 0x007A, b43_radio_read16(dev, 0x007A) | 0x0007); + + b43_gphy_channel_switch(dev, old_channel, 0); + + b43_phy_write(dev, 0x0014, 0x0080); + b43_phy_write(dev, 0x0032, 0x00CA); + b43_phy_write(dev, 0x002A, 0x88A3); + + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); + + if (phy->radio_ver == 0x2050) + b43_radio_write16(dev, 0x005D, 0x000D); + + b43_write16(dev, 0x03E4, (b43_read16(dev, 0x03E4) & 0xFFC0) | 0x0004); } -static inline u16 freq_r3A_value(u16 frequency) +static void b43_phy_initb6(struct b43_wldev *dev) { - u16 value; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 offset, val; + u8 old_channel; + + b43_phy_write(dev, 0x003E, 0x817A); + b43_radio_write16(dev, 0x007A, + (b43_radio_read16(dev, 0x007A) | 0x0058)); + if (phy->radio_rev == 4 || phy->radio_rev == 5) { + b43_radio_write16(dev, 0x51, 0x37); + b43_radio_write16(dev, 0x52, 0x70); + b43_radio_write16(dev, 0x53, 0xB3); + b43_radio_write16(dev, 0x54, 0x9B); + b43_radio_write16(dev, 0x5A, 0x88); + b43_radio_write16(dev, 0x5B, 0x88); + b43_radio_write16(dev, 0x5D, 0x88); + b43_radio_write16(dev, 0x5E, 0x88); + b43_radio_write16(dev, 0x7D, 0x88); + b43_hf_write(dev, b43_hf_read(dev) + | B43_HF_TSSIRPSMW); + } + B43_WARN_ON(phy->radio_rev == 6 || phy->radio_rev == 7); /* We had code for these revs here... */ + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x51, 0); + b43_radio_write16(dev, 0x52, 0x40); + b43_radio_write16(dev, 0x53, 0xB7); + b43_radio_write16(dev, 0x54, 0x98); + b43_radio_write16(dev, 0x5A, 0x88); + b43_radio_write16(dev, 0x5B, 0x6B); + b43_radio_write16(dev, 0x5C, 0x0F); + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) { + b43_radio_write16(dev, 0x5D, 0xFA); + b43_radio_write16(dev, 0x5E, 0xD8); + } else { + b43_radio_write16(dev, 0x5D, 0xF5); + b43_radio_write16(dev, 0x5E, 0xB8); + } + b43_radio_write16(dev, 0x0073, 0x0003); + b43_radio_write16(dev, 0x007D, 0x00A8); + b43_radio_write16(dev, 0x007C, 0x0001); + b43_radio_write16(dev, 0x007E, 0x0008); + } + val = 0x1E1F; + for (offset = 0x0088; offset < 0x0098; offset++) { + b43_phy_write(dev, offset, val); + val -= 0x0202; + } + val = 0x3E3F; + for (offset = 0x0098; offset < 0x00A8; offset++) { + b43_phy_write(dev, offset, val); + val -= 0x0202; + } + val = 0x2120; + for (offset = 0x00A8; offset < 0x00C8; offset++) { + b43_phy_write(dev, offset, (val & 0x3F3F)); + val += 0x0202; + } + if (phy->type == B43_PHYTYPE_G) { + b43_radio_write16(dev, 0x007A, + b43_radio_read16(dev, 0x007A) | 0x0020); + b43_radio_write16(dev, 0x0051, + b43_radio_read16(dev, 0x0051) | 0x0004); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) | 0x0100); + b43_phy_write(dev, 0x042B, b43_phy_read(dev, 0x042B) | 0x2000); + b43_phy_write(dev, 0x5B, 0); + b43_phy_write(dev, 0x5C, 0); + } + + old_channel = phy->channel; + if (old_channel >= 8) + b43_gphy_channel_switch(dev, 1, 0); + else + b43_gphy_channel_switch(dev, 13, 0); + + b43_radio_write16(dev, 0x0050, 0x0020); + b43_radio_write16(dev, 0x0050, 0x0023); + udelay(40); + if (phy->radio_rev < 6 || phy->radio_rev == 8) { + b43_radio_write16(dev, 0x7C, (b43_radio_read16(dev, 0x7C) + | 0x0002)); + b43_radio_write16(dev, 0x50, 0x20); + } + if (phy->radio_rev <= 2) { + b43_radio_write16(dev, 0x7C, 0x20); + b43_radio_write16(dev, 0x5A, 0x70); + b43_radio_write16(dev, 0x5B, 0x7B); + b43_radio_write16(dev, 0x5C, 0xB0); + } + b43_radio_write16(dev, 0x007A, + (b43_radio_read16(dev, 0x007A) & 0x00F8) | 0x0007); + + b43_gphy_channel_switch(dev, old_channel, 0); - if (frequency < 5091) - value = 0x0040; - else if (frequency < 5321) - value = 0x0000; - else if (frequency < 5806) - value = 0x0080; + b43_phy_write(dev, 0x0014, 0x0200); + if (phy->radio_rev >= 6) + b43_phy_write(dev, 0x2A, 0x88C2); else - value = 0x0040; + b43_phy_write(dev, 0x2A, 0x8AC0); + b43_phy_write(dev, 0x0038, 0x0668); + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, gphy->tx_control); + if (phy->radio_rev <= 5) { + b43_phy_write(dev, 0x5D, (b43_phy_read(dev, 0x5D) + & 0xFF80) | 0x0003); + } + if (phy->radio_rev <= 2) + b43_radio_write16(dev, 0x005D, 0x000D); - return value; + if (phy->analog == 4) { + b43_write16(dev, 0x3E4, 9); + b43_phy_write(dev, 0x61, b43_phy_read(dev, 0x61) + & 0x0FFF); + } else { + b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0) + | 0x0004); + } + if (phy->type == B43_PHYTYPE_B) + B43_WARN_ON(1); + else if (phy->type == B43_PHYTYPE_G) + b43_write16(dev, 0x03E6, 0x0); } -void b43_radio_set_tx_iq(struct b43_wldev *dev) +static void b43_calc_loopback_gain(struct b43_wldev *dev) { - static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 }; - static const u8 data_low[5] = { 0x00, 0x01, 0x05, 0x06, 0x0A }; - u16 tmp = b43_radio_read16(dev, 0x001E); - int i, j; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u16 backup_phy[16] = { 0 }; + u16 backup_radio[3]; + u16 backup_bband; + u16 i, j, loop_i_max; + u16 trsw_rx; + u16 loop1_outer_done, loop1_inner_done; - for (i = 0; i < 5; i++) { - for (j = 0; j < 5; j++) { - if (tmp == (data_high[i] << 4 | data_low[j])) { - b43_phy_write(dev, 0x0069, - (i - j) << 8 | 0x00C0); - return; + backup_phy[0] = b43_phy_read(dev, B43_PHY_CRS0); + backup_phy[1] = b43_phy_read(dev, B43_PHY_CCKBBANDCFG); + backup_phy[2] = b43_phy_read(dev, B43_PHY_RFOVER); + backup_phy[3] = b43_phy_read(dev, B43_PHY_RFOVERVAL); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + backup_phy[4] = b43_phy_read(dev, B43_PHY_ANALOGOVER); + backup_phy[5] = b43_phy_read(dev, B43_PHY_ANALOGOVERVAL); + } + backup_phy[6] = b43_phy_read(dev, B43_PHY_CCK(0x5A)); + backup_phy[7] = b43_phy_read(dev, B43_PHY_CCK(0x59)); + backup_phy[8] = b43_phy_read(dev, B43_PHY_CCK(0x58)); + backup_phy[9] = b43_phy_read(dev, B43_PHY_CCK(0x0A)); + backup_phy[10] = b43_phy_read(dev, B43_PHY_CCK(0x03)); + backup_phy[11] = b43_phy_read(dev, B43_PHY_LO_MASK); + backup_phy[12] = b43_phy_read(dev, B43_PHY_LO_CTL); + backup_phy[13] = b43_phy_read(dev, B43_PHY_CCK(0x2B)); + backup_phy[14] = b43_phy_read(dev, B43_PHY_PGACTL); + backup_phy[15] = b43_phy_read(dev, B43_PHY_LO_LEAKAGE); + backup_bband = gphy->bbatt.att; + backup_radio[0] = b43_radio_read16(dev, 0x52); + backup_radio[1] = b43_radio_read16(dev, 0x43); + backup_radio[2] = b43_radio_read16(dev, 0x7A); + + b43_phy_write(dev, B43_PHY_CRS0, + b43_phy_read(dev, B43_PHY_CRS0) & 0x3FFF); + b43_phy_write(dev, B43_PHY_CCKBBANDCFG, + b43_phy_read(dev, B43_PHY_CCKBBANDCFG) | 0x8000); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0002); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFD); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0001); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xFFFE); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0001); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFE); + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0002); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFD); + } + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x000C); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) | 0x000C); + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0030); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xFFCF) | 0x10); + + b43_phy_write(dev, B43_PHY_CCK(0x5A), 0x0780); + b43_phy_write(dev, B43_PHY_CCK(0x59), 0xC810); + b43_phy_write(dev, B43_PHY_CCK(0x58), 0x000D); + + b43_phy_write(dev, B43_PHY_CCK(0x0A), + b43_phy_read(dev, B43_PHY_CCK(0x0A)) | 0x2000); + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, + b43_phy_read(dev, B43_PHY_ANALOGOVER) | 0x0004); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, + b43_phy_read(dev, + B43_PHY_ANALOGOVERVAL) & 0xFFFB); + } + b43_phy_write(dev, B43_PHY_CCK(0x03), + (b43_phy_read(dev, B43_PHY_CCK(0x03)) + & 0xFF9F) | 0x40); + + if (phy->radio_rev == 8) { + b43_radio_write16(dev, 0x43, 0x000F); + } else { + b43_radio_write16(dev, 0x52, 0); + b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43) + & 0xFFF0) | 0x9); + } + b43_gphy_set_baseband_attenuation(dev, 11); + + if (phy->rev >= 3) + b43_phy_write(dev, B43_PHY_LO_MASK, 0xC020); + else + b43_phy_write(dev, B43_PHY_LO_MASK, 0x8020); + b43_phy_write(dev, B43_PHY_LO_CTL, 0); + + b43_phy_write(dev, B43_PHY_CCK(0x2B), + (b43_phy_read(dev, B43_PHY_CCK(0x2B)) + & 0xFFC0) | 0x01); + b43_phy_write(dev, B43_PHY_CCK(0x2B), + (b43_phy_read(dev, B43_PHY_CCK(0x2B)) + & 0xC0FF) | 0x800); + + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) | 0x0100); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF); + + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) { + if (phy->rev >= 7) { + b43_phy_write(dev, B43_PHY_RFOVER, + b43_phy_read(dev, B43_PHY_RFOVER) + | 0x0800); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) + | 0x8000); + } + } + b43_radio_write16(dev, 0x7A, b43_radio_read16(dev, 0x7A) + & 0x00F7); + + j = 0; + loop_i_max = (phy->radio_rev == 8) ? 15 : 9; + for (i = 0; i < loop_i_max; i++) { + for (j = 0; j < 16; j++) { + b43_radio_write16(dev, 0x43, i); + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xF0FF) | (j << 8)); + b43_phy_write(dev, B43_PHY_PGACTL, + (b43_phy_read(dev, B43_PHY_PGACTL) + & 0x0FFF) | 0xA000); + b43_phy_write(dev, B43_PHY_PGACTL, + b43_phy_read(dev, B43_PHY_PGACTL) + | 0xF000); + udelay(20); + if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) + goto exit_loop1; + } + } + exit_loop1: + loop1_outer_done = i; + loop1_inner_done = j; + if (j >= 8) { + b43_phy_write(dev, B43_PHY_RFOVERVAL, + b43_phy_read(dev, B43_PHY_RFOVERVAL) + | 0x30); + trsw_rx = 0x1B; + for (j = j - 8; j < 16; j++) { + b43_phy_write(dev, B43_PHY_RFOVERVAL, + (b43_phy_read(dev, B43_PHY_RFOVERVAL) + & 0xF0FF) | (j << 8)); + b43_phy_write(dev, B43_PHY_PGACTL, + (b43_phy_read(dev, B43_PHY_PGACTL) + & 0x0FFF) | 0xA000); + b43_phy_write(dev, B43_PHY_PGACTL, + b43_phy_read(dev, B43_PHY_PGACTL) + | 0xF000); + udelay(20); + trsw_rx -= 3; + if (b43_phy_read(dev, B43_PHY_LO_LEAKAGE) >= 0xDFC) + goto exit_loop2; + } + } else + trsw_rx = 0x18; + exit_loop2: + + if (phy->rev != 1) { /* Not in specs, but needed to prevent PPC machine check */ + b43_phy_write(dev, B43_PHY_ANALOGOVER, backup_phy[4]); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, backup_phy[5]); + } + b43_phy_write(dev, B43_PHY_CCK(0x5A), backup_phy[6]); + b43_phy_write(dev, B43_PHY_CCK(0x59), backup_phy[7]); + b43_phy_write(dev, B43_PHY_CCK(0x58), backup_phy[8]); + b43_phy_write(dev, B43_PHY_CCK(0x0A), backup_phy[9]); + b43_phy_write(dev, B43_PHY_CCK(0x03), backup_phy[10]); + b43_phy_write(dev, B43_PHY_LO_MASK, backup_phy[11]); + b43_phy_write(dev, B43_PHY_LO_CTL, backup_phy[12]); + b43_phy_write(dev, B43_PHY_CCK(0x2B), backup_phy[13]); + b43_phy_write(dev, B43_PHY_PGACTL, backup_phy[14]); + + b43_gphy_set_baseband_attenuation(dev, backup_bband); + + b43_radio_write16(dev, 0x52, backup_radio[0]); + b43_radio_write16(dev, 0x43, backup_radio[1]); + b43_radio_write16(dev, 0x7A, backup_radio[2]); + + b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2] | 0x0003); + udelay(10); + b43_phy_write(dev, B43_PHY_RFOVER, backup_phy[2]); + b43_phy_write(dev, B43_PHY_RFOVERVAL, backup_phy[3]); + b43_phy_write(dev, B43_PHY_CRS0, backup_phy[0]); + b43_phy_write(dev, B43_PHY_CCKBBANDCFG, backup_phy[1]); + + gphy->max_lb_gain = + ((loop1_inner_done * 6) - (loop1_outer_done * 4)) - 11; + gphy->trsw_rx_gain = trsw_rx * 2; +} + +static void b43_hardware_pctl_early_init(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + + if (!b43_has_hardware_pctl(dev)) { + b43_phy_write(dev, 0x047A, 0xC111); + return; + } + + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) & 0xFEFF); + b43_phy_write(dev, 0x002F, 0x0202); + b43_phy_write(dev, 0x047C, b43_phy_read(dev, 0x047C) | 0x0002); + b43_phy_write(dev, 0x047A, b43_phy_read(dev, 0x047A) | 0xF000); + if (phy->radio_ver == 0x2050 && phy->radio_rev == 8) { + b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) + & 0xFF0F) | 0x0010); + b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) + | 0x8000); + b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) + & 0xFFC0) | 0x0010); + b43_phy_write(dev, 0x002E, 0xC07F); + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0400); + } else { + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0200); + b43_phy_write(dev, 0x0036, b43_phy_read(dev, 0x0036) + | 0x0400); + b43_phy_write(dev, 0x005D, b43_phy_read(dev, 0x005D) + & 0x7FFF); + b43_phy_write(dev, 0x004F, b43_phy_read(dev, 0x004F) + & 0xFFFE); + b43_phy_write(dev, 0x004E, (b43_phy_read(dev, 0x004E) + & 0xFFC0) | 0x0010); + b43_phy_write(dev, 0x002E, 0xC07F); + b43_phy_write(dev, 0x047A, (b43_phy_read(dev, 0x047A) + & 0xFF0F) | 0x0010); + } +} + +/* Hardware power control for G-PHY */ +static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + if (!b43_has_hardware_pctl(dev)) { + /* No hardware power control */ + b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_HWPCTL); + return; + } + + b43_phy_write(dev, 0x0036, (b43_phy_read(dev, 0x0036) & 0xFFC0) + | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); + b43_phy_write(dev, 0x0478, (b43_phy_read(dev, 0x0478) & 0xFF00) + | (gphy->tgt_idle_tssi - gphy->cur_idle_tssi)); + b43_gphy_tssi_power_lt_init(dev); + b43_gphy_gain_lt_init(dev); + b43_phy_write(dev, 0x0060, b43_phy_read(dev, 0x0060) & 0xFFBF); + b43_phy_write(dev, 0x0014, 0x0000); + + B43_WARN_ON(phy->rev < 6); + b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) + | 0x0800); + b43_phy_write(dev, 0x0478, b43_phy_read(dev, 0x0478) + & 0xFEFF); + b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801) + & 0xFFBF); + + b43_gphy_dc_lt_init(dev, 1); + + /* Enable hardware pctl in firmware. */ + b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL); +} + +/* Intialize B/G PHY power control */ +static void b43_phy_init_pctl(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + struct b43_rfatt old_rfatt; + struct b43_bbatt old_bbatt; + u8 old_tx_control = 0; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) && + (bus->boardinfo.type == SSB_BOARD_BU4306)) + return; + + b43_phy_write(dev, 0x0028, 0x8018); + + /* This does something with the Analog... */ + b43_write16(dev, B43_MMIO_PHY0, b43_read16(dev, B43_MMIO_PHY0) + & 0xFFDF); + + if (!phy->gmode) + return; + b43_hardware_pctl_early_init(dev); + if (gphy->cur_idle_tssi == 0) { + if (phy->radio_ver == 0x2050 && phy->analog == 0) { + b43_radio_write16(dev, 0x0076, + (b43_radio_read16(dev, 0x0076) + & 0x00F7) | 0x0084); + } else { + struct b43_rfatt rfatt; + struct b43_bbatt bbatt; + + memcpy(&old_rfatt, &gphy->rfatt, sizeof(old_rfatt)); + memcpy(&old_bbatt, &gphy->bbatt, sizeof(old_bbatt)); + old_tx_control = gphy->tx_control; + + bbatt.att = 11; + if (phy->radio_rev == 8) { + rfatt.att = 15; + rfatt.with_padmix = 1; + } else { + rfatt.att = 9; + rfatt.with_padmix = 0; } + b43_set_txpower_g(dev, &bbatt, &rfatt, 0); + } + b43_dummy_transmission(dev); + gphy->cur_idle_tssi = b43_phy_read(dev, B43_PHY_ITSSI); + if (B43_DEBUG) { + /* Current-Idle-TSSI sanity check. */ + if (abs(gphy->cur_idle_tssi - gphy->tgt_idle_tssi) >= 20) { + b43dbg(dev->wl, + "!WARNING! Idle-TSSI phy->cur_idle_tssi " + "measuring failed. (cur=%d, tgt=%d). Disabling TX power " + "adjustment.\n", gphy->cur_idle_tssi, + gphy->tgt_idle_tssi); + gphy->cur_idle_tssi = 0; + } + } + if (phy->radio_ver == 0x2050 && phy->analog == 0) { + b43_radio_write16(dev, 0x0076, + b43_radio_read16(dev, 0x0076) + & 0xFF7B); + } else { + b43_set_txpower_g(dev, &old_bbatt, + &old_rfatt, old_tx_control); } } + b43_hardware_pctl_init_gphy(dev); + b43_shm_clear_tssi(dev); } -int b43_radio_selectchannel(struct b43_wldev *dev, - u8 channel, int synthetic_pu_workaround) +static void b43_phy_initg(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - u16 r8, tmp; - u16 freq; - u16 channelcookie, savedcookie; - int err = 0; - - if (channel == 0xFF) { - switch (phy->type) { - case B43_PHYTYPE_A: - channel = B43_DEFAULT_CHANNEL_A; - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: - channel = B43_DEFAULT_CHANNEL_BG; - break; - case B43_PHYTYPE_N: - //FIXME check if we are on 2.4GHz or 5GHz and set a default channel. - channel = 1; - break; - default: - B43_WARN_ON(1); + struct b43_phy_g *gphy = phy->g; + u16 tmp; + + if (phy->rev == 1) + b43_phy_initb5(dev); + else + b43_phy_initb6(dev); + + if (phy->rev >= 2 || phy->gmode) + b43_phy_inita(dev); + + if (phy->rev >= 2) { + b43_phy_write(dev, B43_PHY_ANALOGOVER, 0); + b43_phy_write(dev, B43_PHY_ANALOGOVERVAL, 0); + } + if (phy->rev == 2) { + b43_phy_write(dev, B43_PHY_RFOVER, 0); + b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); + } + if (phy->rev > 5) { + b43_phy_write(dev, B43_PHY_RFOVER, 0x400); + b43_phy_write(dev, B43_PHY_PGACTL, 0xC0); + } + if (phy->gmode || phy->rev >= 2) { + tmp = b43_phy_read(dev, B43_PHY_VERSION_OFDM); + tmp &= B43_PHYVER_VERSION; + if (tmp == 3 || tmp == 5) { + b43_phy_write(dev, B43_PHY_OFDM(0xC2), 0x1816); + b43_phy_write(dev, B43_PHY_OFDM(0xC3), 0x8006); } + if (tmp == 5) { + b43_phy_write(dev, B43_PHY_OFDM(0xCC), + (b43_phy_read(dev, B43_PHY_OFDM(0xCC)) + & 0x00FF) | 0x1F00); + } + } + if ((phy->rev <= 2 && phy->gmode) || phy->rev >= 2) + b43_phy_write(dev, B43_PHY_OFDM(0x7E), 0x78); + if (phy->radio_rev == 8) { + b43_phy_write(dev, B43_PHY_EXTG(0x01), + b43_phy_read(dev, B43_PHY_EXTG(0x01)) + | 0x80); + b43_phy_write(dev, B43_PHY_OFDM(0x3E), + b43_phy_read(dev, B43_PHY_OFDM(0x3E)) + | 0x4); + } + if (has_loopback_gain(phy)) + b43_calc_loopback_gain(dev); + + if (phy->radio_rev != 8) { + if (gphy->initval == 0xFFFF) + gphy->initval = b43_radio_init2050(dev); + else + b43_radio_write16(dev, 0x0078, gphy->initval); + } + b43_lo_g_init(dev); + if (has_tx_magnification(phy)) { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFF00) + | gphy->lo_control->tx_bias | gphy-> + lo_control->tx_magn); + } else { + b43_radio_write16(dev, 0x52, + (b43_radio_read16(dev, 0x52) & 0xFFF0) + | gphy->lo_control->tx_bias); + } + if (phy->rev >= 6) { + b43_phy_write(dev, B43_PHY_CCK(0x36), + (b43_phy_read(dev, B43_PHY_CCK(0x36)) + & 0x0FFF) | (gphy->lo_control-> + tx_bias << 12)); + } + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075); + else + b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F); + if (phy->rev < 2) + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101); + else + b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202); + if (phy->gmode || phy->rev >= 2) { + b43_lo_g_adjust(dev); + b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078); } - /* First we set the channel radio code to prevent the - * firmware from sending ghost packets. - */ - channelcookie = channel; - if (0 /*FIXME on 5Ghz */) - channelcookie |= 0x100; - //FIXME set 40Mhz flag if required - savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); - b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); - - switch (phy->type) { - case B43_PHYTYPE_A: - if (channel > 200) { - err = -EINVAL; - goto out; + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) { + /* The specs state to update the NRSSI LT with + * the value 0x7FFFFFFF here. I think that is some weird + * compiler optimization in the original driver. + * Essentially, what we do here is resetting all NRSSI LT + * entries to -32 (see the clamp_val() in nrssi_hw_update()) + */ + b43_nrssi_hw_update(dev, 0xFFFF); //FIXME? + b43_calc_nrssi_threshold(dev); + } else if (phy->gmode || phy->rev >= 2) { + if (gphy->nrssi[0] == -1000) { + B43_WARN_ON(gphy->nrssi[1] != -1000); + b43_calc_nrssi_slope(dev); + } else + b43_calc_nrssi_threshold(dev); + } + if (phy->radio_rev == 8) + b43_phy_write(dev, B43_PHY_EXTG(0x05), 0x3230); + b43_phy_init_pctl(dev); + /* FIXME: The spec says in the following if, the 0 should be replaced + 'if OFDM may not be used in the current locale' + but OFDM is legal everywhere */ + if ((dev->dev->bus->chip_id == 0x4306 + && dev->dev->bus->chip_package == 2) || 0) { + b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0) + & 0xBFFF); + b43_phy_write(dev, B43_PHY_OFDM(0xC3), + b43_phy_read(dev, B43_PHY_OFDM(0xC3)) + & 0x7FFF); + } +} + +void b43_gphy_channel_switch(struct b43_wldev *dev, + unsigned int channel, + bool synthetic_pu_workaround) +{ + if (synthetic_pu_workaround) + b43_synth_pu_workaround(dev, channel); + + b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); + + if (channel == 14) { + if (dev->dev->bus->sprom.country_code == + SSB_SPROM1CCODE_JAPAN) + b43_hf_write(dev, + b43_hf_read(dev) & ~B43_HF_ACPR); + else + b43_hf_write(dev, + b43_hf_read(dev) | B43_HF_ACPR); + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + | (1 << 11)); + } else { + b43_write16(dev, B43_MMIO_CHANNEL_EXT, + b43_read16(dev, B43_MMIO_CHANNEL_EXT) + & 0xF7BF); + } +} + +static void default_baseband_attenuation(struct b43_wldev *dev, + struct b43_bbatt *bb) +{ + struct b43_phy *phy = &dev->phy; + + if (phy->radio_ver == 0x2050 && phy->radio_rev < 6) + bb->att = 0; + else + bb->att = 2; +} + +static void default_radio_attenuation(struct b43_wldev *dev, + struct b43_rfatt *rf) +{ + struct ssb_bus *bus = dev->dev->bus; + struct b43_phy *phy = &dev->phy; + + rf->with_padmix = 0; + + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM && + bus->boardinfo.type == SSB_BOARD_BCM4309G) { + if (bus->boardinfo.rev < 0x43) { + rf->att = 2; + return; + } else if (bus->boardinfo.rev < 0x51) { + rf->att = 3; + return; } - freq = channel2freq_a(channel); - - r8 = b43_radio_read16(dev, 0x0008); - b43_write16(dev, 0x03F0, freq); - b43_radio_write16(dev, 0x0008, r8); - - //TODO: write max channel TX power? to Radio 0x2D - tmp = b43_radio_read16(dev, 0x002E); - tmp &= 0x0080; - //TODO: OR tmp with the Power out estimation for this channel? - b43_radio_write16(dev, 0x002E, tmp); - - if (freq >= 4920 && freq <= 5500) { - /* - * r8 = (((freq * 15 * 0xE1FC780F) >> 32) / 29) & 0x0F; - * = (freq * 0.025862069 - */ - r8 = 3 * freq / 116; /* is equal to r8 = freq * 0.025862 */ + } + + if (phy->type == B43_PHYTYPE_A) { + rf->att = 0x60; + return; + } + + switch (phy->radio_ver) { + case 0x2053: + switch (phy->radio_rev) { + case 1: + rf->att = 6; + return; } - b43_radio_write16(dev, 0x0007, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0020, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0021, (r8 << 4) | r8); - b43_radio_write16(dev, 0x0022, (b43_radio_read16(dev, 0x0022) - & 0x000F) | (r8 << 4)); - b43_radio_write16(dev, 0x002A, (r8 << 4)); - b43_radio_write16(dev, 0x002B, (r8 << 4)); - b43_radio_write16(dev, 0x0008, (b43_radio_read16(dev, 0x0008) - & 0x00F0) | (r8 << 4)); - b43_radio_write16(dev, 0x0029, (b43_radio_read16(dev, 0x0029) - & 0xFF0F) | 0x00B0); - b43_radio_write16(dev, 0x0035, 0x00AA); - b43_radio_write16(dev, 0x0036, 0x0085); - b43_radio_write16(dev, 0x003A, (b43_radio_read16(dev, 0x003A) - & 0xFF20) | - freq_r3A_value(freq)); - b43_radio_write16(dev, 0x003D, - b43_radio_read16(dev, 0x003D) & 0x00FF); - b43_radio_write16(dev, 0x0081, (b43_radio_read16(dev, 0x0081) - & 0xFF7F) | 0x0080); - b43_radio_write16(dev, 0x0035, - b43_radio_read16(dev, 0x0035) & 0xFFEF); - b43_radio_write16(dev, 0x0035, (b43_radio_read16(dev, 0x0035) - & 0xFFEF) | 0x0010); - b43_radio_set_tx_iq(dev); - //TODO: TSSI2dbm workaround - b43_phy_xmitpower(dev); //FIXME correct? break; - case B43_PHYTYPE_G: - if ((channel < 1) || (channel > 14)) { - err = -EINVAL; - goto out; + case 0x2050: + switch (phy->radio_rev) { + case 0: + rf->att = 5; + return; + case 1: + if (phy->type == B43_PHYTYPE_G) { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 3; + else if (bus->boardinfo.vendor == + SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == + SSB_BOARD_BU4306) + rf->att = 3; + else + rf->att = 1; + } else { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 7; + else + rf->att = 6; + } + return; + case 2: + if (phy->type == B43_PHYTYPE_G) { + if (bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == SSB_BOARD_BCM4309G + && bus->boardinfo.rev >= 30) + rf->att = 3; + else if (bus->boardinfo.vendor == + SSB_BOARDVENDOR_BCM + && bus->boardinfo.type == + SSB_BOARD_BU4306) + rf->att = 5; + else if (bus->chip_id == 0x4320) + rf->att = 4; + else + rf->att = 3; + } else + rf->att = 6; + return; + case 3: + rf->att = 5; + return; + case 4: + case 5: + rf->att = 1; + return; + case 6: + case 7: + rf->att = 5; + return; + case 8: + rf->att = 0xA; + rf->with_padmix = 1; + return; + case 9: + default: + rf->att = 5; + return; } + } + rf->att = 5; +} - if (synthetic_pu_workaround) - b43_synth_pu_workaround(dev, channel); +static u16 default_tx_control(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; - b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel)); + if (phy->radio_ver != 0x2050) + return 0; + if (phy->radio_rev == 1) + return B43_TXCTL_PA2DB | B43_TXCTL_TXMIX; + if (phy->radio_rev < 6) + return B43_TXCTL_PA2DB; + if (phy->radio_rev == 8) + return B43_TXCTL_TXMIX; + return 0; +} - if (channel == 14) { - if (dev->dev->bus->sprom.country_code == - SSB_SPROM1CCODE_JAPAN) - b43_hf_write(dev, - b43_hf_read(dev) & ~B43_HF_ACPR); - else - b43_hf_write(dev, - b43_hf_read(dev) | B43_HF_ACPR); - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - | (1 << 11)); - } else { - b43_write16(dev, B43_MMIO_CHANNEL_EXT, - b43_read16(dev, B43_MMIO_CHANNEL_EXT) - & 0xF7BF); +static u8 b43_gphy_aci_detect(struct b43_wldev *dev, u8 channel) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + u8 ret = 0; + u16 saved, rssi, temp; + int i, j = 0; + + saved = b43_phy_read(dev, 0x0403); + b43_switch_channel(dev, channel); + b43_phy_write(dev, 0x0403, (saved & 0xFFF8) | 5); + if (gphy->aci_hw_rssi) + rssi = b43_phy_read(dev, 0x048A) & 0x3F; + else + rssi = saved & 0x3F; + /* clamp temp to signed 5bit */ + if (rssi > 32) + rssi -= 64; + for (i = 0; i < 100; i++) { + temp = (b43_phy_read(dev, 0x047F) >> 8) & 0x3F; + if (temp > 32) + temp -= 64; + if (temp < rssi) + j++; + if (j >= 20) + ret = 1; + } + b43_phy_write(dev, 0x0403, saved); + + return ret; +} + +static u8 b43_gphy_aci_scan(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + u8 ret[13]; + unsigned int channel = phy->channel; + unsigned int i, j, start, end; + + if (!((phy->type == B43_PHYTYPE_G) && (phy->rev > 0))) + return 0; + + b43_phy_lock(dev); + b43_radio_lock(dev); + b43_phy_write(dev, 0x0802, b43_phy_read(dev, 0x0802) & 0xFFFC); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) & 0x7FFF); + b43_set_all_gains(dev, 3, 8, 1); + + start = (channel - 5 > 0) ? channel - 5 : 1; + end = (channel + 5 < 14) ? channel + 5 : 13; + + for (i = start; i <= end; i++) { + if (abs(channel - i) > 2) + ret[i - 1] = b43_gphy_aci_detect(dev, i); + } + b43_switch_channel(dev, channel); + b43_phy_write(dev, 0x0802, + (b43_phy_read(dev, 0x0802) & 0xFFFC) | 0x0003); + b43_phy_write(dev, 0x0403, b43_phy_read(dev, 0x0403) & 0xFFF8); + b43_phy_write(dev, B43_PHY_G_CRS, + b43_phy_read(dev, B43_PHY_G_CRS) | 0x8000); + b43_set_original_gains(dev); + for (i = 0; i < 13; i++) { + if (!ret[i]) + continue; + end = (i + 5 < 13) ? i + 5 : 13; + for (j = i; j < end; j++) + ret[j] = 1; + } + b43_radio_unlock(dev); + b43_phy_unlock(dev); + + return ret[channel - 1]; +} + +static s32 b43_tssi2dbm_ad(s32 num, s32 den) +{ + if (num < 0) + return num / den; + else + return (num + den / 2) / den; +} + +static s8 b43_tssi2dbm_entry(s8 entry[], u8 index, + s16 pab0, s16 pab1, s16 pab2) +{ + s32 m1, m2, f = 256, q, delta; + s8 i = 0; + + m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32); + m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1); + do { + if (i > 15) + return -EINVAL; + q = b43_tssi2dbm_ad(f * 4096 - + b43_tssi2dbm_ad(m2 * f, 16) * f, 2048); + delta = abs(q - f); + f = q; + i++; + } while (delta >= 2); + entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128); + return 0; +} + +u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, + s16 pab0, s16 pab1, s16 pab2) +{ + unsigned int i; + u8 *tab; + int err; + + tab = kmalloc(64, GFP_KERNEL); + if (!tab) { + b43err(dev->wl, "Could not allocate memory " + "for tssi2dbm table\n"); + return NULL; + } + for (i = 0; i < 64; i++) { + err = b43_tssi2dbm_entry(tab, i, pab0, pab1, pab2); + if (err) { + b43err(dev->wl, "Could not generate " + "tssi2dBm table\n"); + kfree(tab); + return NULL; } - break; - case B43_PHYTYPE_N: - err = b43_nphy_selectchannel(dev, channel); - if (err) - goto out; - break; - default: - B43_WARN_ON(1); } - phy->channel = channel; - /* Wait for the radio to tune to the channel and stabilize. */ - msleep(8); -out: - if (err) { - b43_shm_write16(dev, B43_SHM_SHARED, - B43_SHM_SH_CHAN, savedcookie); + return tab; +} + +/* Initialise the TSSI->dBm lookup table */ +static int b43_gphy_init_tssi2dbm_table(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + s16 pab0, pab1, pab2; + + pab0 = (s16) (dev->dev->bus->sprom.pa0b0); + pab1 = (s16) (dev->dev->bus->sprom.pa0b1); + pab2 = (s16) (dev->dev->bus->sprom.pa0b2); + + B43_WARN_ON((dev->dev->bus->chip_id == 0x4301) && + (phy->radio_ver != 0x2050)); /* Not supported anymore */ + + gphy->dyn_tssi_tbl = 0; + + if (pab0 != 0 && pab1 != 0 && pab2 != 0 && + pab0 != -1 && pab1 != -1 && pab2 != -1) { + /* The pabX values are set in SPROM. Use them. */ + if ((s8) dev->dev->bus->sprom.itssi_bg != 0 && + (s8) dev->dev->bus->sprom.itssi_bg != -1) { + gphy->tgt_idle_tssi = + (s8) (dev->dev->bus->sprom.itssi_bg); + } else + gphy->tgt_idle_tssi = 62; + gphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0, + pab1, pab2); + if (!gphy->tssi2dbm) + return -ENOMEM; + gphy->dyn_tssi_tbl = 1; + } else { + /* pabX values not set in SPROM. */ + gphy->tgt_idle_tssi = 52; + gphy->tssi2dbm = b43_tssi2dbm_g_table; } + + return 0; +} + +static int b43_gphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_g *gphy; + struct b43_txpower_lo_control *lo; + int err; + + gphy = kzalloc(sizeof(*gphy), GFP_KERNEL); + if (!gphy) { + err = -ENOMEM; + goto error; + } + dev->phy.g = gphy; + + lo = kzalloc(sizeof(*lo), GFP_KERNEL); + if (!lo) { + err = -ENOMEM; + goto err_free_gphy; + } + gphy->lo_control = lo; + + err = b43_gphy_init_tssi2dbm_table(dev); + if (err) + goto err_free_lo; + + return 0; + +err_free_lo: + kfree(lo); +err_free_gphy: + kfree(gphy); +error: return err; } -void b43_radio_turn_on(struct b43_wldev *dev) +static void b43_gphy_op_prepare_structs(struct b43_wldev *dev) { struct b43_phy *phy = &dev->phy; - int err; - u8 channel; + struct b43_phy_g *gphy = phy->g; + const void *tssi2dbm; + int tgt_idle_tssi; + struct b43_txpower_lo_control *lo; + unsigned int i; + + /* tssi2dbm table is constant, so it is initialized at alloc time. + * Save a copy of the pointer. */ + tssi2dbm = gphy->tssi2dbm; + tgt_idle_tssi = gphy->tgt_idle_tssi; + /* Save the LO pointer. */ + lo = gphy->lo_control; + + /* Zero out the whole PHY structure. */ + memset(gphy, 0, sizeof(*gphy)); + + /* Restore pointers. */ + gphy->tssi2dbm = tssi2dbm; + gphy->tgt_idle_tssi = tgt_idle_tssi; + gphy->lo_control = lo; + + memset(gphy->minlowsig, 0xFF, sizeof(gphy->minlowsig)); + + /* NRSSI */ + for (i = 0; i < ARRAY_SIZE(gphy->nrssi); i++) + gphy->nrssi[i] = -1000; + for (i = 0; i < ARRAY_SIZE(gphy->nrssi_lt); i++) + gphy->nrssi_lt[i] = i; + + gphy->lofcal = 0xFFFF; + gphy->initval = 0xFFFF; + + gphy->interfmode = B43_INTERFMODE_NONE; + + /* OFDM-table address caching. */ + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_UNKNOWN; + + gphy->average_tssi = 0xFF; + + /* Local Osciallator structure */ + lo->tx_bias = 0xFF; + INIT_LIST_HEAD(&lo->calib_list); +} + +static void b43_gphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + kfree(gphy->lo_control); + + if (gphy->dyn_tssi_tbl) + kfree(gphy->tssi2dbm); + gphy->dyn_tssi_tbl = 0; + gphy->tssi2dbm = NULL; + + kfree(gphy); + dev->phy.g = NULL; +} + +static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + struct b43_txpower_lo_control *lo = gphy->lo_control; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + + default_baseband_attenuation(dev, &gphy->bbatt); + default_radio_attenuation(dev, &gphy->rfatt); + gphy->tx_control = (default_tx_control(dev) << 4); + generate_rfatt_list(dev, &lo->rfatt_list); + generate_bbatt_list(dev, &lo->bbatt_list); + + /* Commit previous writes */ + b43_read32(dev, B43_MMIO_MACCTL); + + if (phy->rev == 1) { + /* Workaround: Temporarly disable gmode through the early init + * phase, as the gmode stuff is not needed for phy rev 1 */ + phy->gmode = 0; + b43_wireless_core_reset(dev, 0); + b43_phy_initg(dev); + phy->gmode = 1; + b43_wireless_core_reset(dev, B43_TMSLOW_GMODE); + } + + return 0; +} + +static int b43_gphy_op_init(struct b43_wldev *dev) +{ + b43_phy_initg(dev); + + return 0; +} + +static void b43_gphy_op_exit(struct b43_wldev *dev) +{ + b43_lo_g_cleanup(dev); +} + +static u16 b43_gphy_op_read(struct b43_wldev *dev, u16 reg) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_gphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_gphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* G-PHY needs 0x80 for read access. */ + reg |= 0x80; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_gphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static bool b43_gphy_op_supports_hwpctl(struct b43_wldev *dev) +{ + return (dev->phy.rev >= 6); +} + +static void b43_gphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int channel; might_sleep(); - if (phy->radio_on) - return; + if (state == RFKILL_STATE_UNBLOCKED) { + /* Turn radio ON */ + if (phy->radio_on) + return; - switch (phy->type) { - case B43_PHYTYPE_A: - b43_radio_write16(dev, 0x0004, 0x00C0); - b43_radio_write16(dev, 0x0005, 0x0008); - b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7); - b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7); - b43_radio_init2060(dev); - break; - case B43_PHYTYPE_B: - case B43_PHYTYPE_G: b43_phy_write(dev, 0x0015, 0x8000); b43_phy_write(dev, 0x0015, 0xCC00); b43_phy_write(dev, 0x0015, (phy->gmode ? 0x00C0 : 0x0000)); - if (phy->radio_off_context.valid) { + if (gphy->radio_off_context.valid) { /* Restore the RFover values. */ b43_phy_write(dev, B43_PHY_RFOVER, - phy->radio_off_context.rfover); + gphy->radio_off_context.rfover); b43_phy_write(dev, B43_PHY_RFOVERVAL, - phy->radio_off_context.rfoverval); - phy->radio_off_context.valid = 0; + gphy->radio_off_context.rfoverval); + gphy->radio_off_context.valid = 0; } channel = phy->channel; - err = b43_radio_selectchannel(dev, B43_DEFAULT_CHANNEL_BG, 1); - err |= b43_radio_selectchannel(dev, channel, 0); - B43_WARN_ON(err); - break; - case B43_PHYTYPE_N: - b43_nphy_radio_turn_on(dev); - break; - default: - B43_WARN_ON(1); + b43_gphy_channel_switch(dev, 6, 1); + b43_gphy_channel_switch(dev, channel, 0); + } else { + /* Turn radio OFF */ + u16 rfover, rfoverval; + + rfover = b43_phy_read(dev, B43_PHY_RFOVER); + rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); + gphy->radio_off_context.rfover = rfover; + gphy->radio_off_context.rfoverval = rfoverval; + gphy->radio_off_context.valid = 1; + b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); + b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); } - phy->radio_on = 1; } -void b43_radio_turn_off(struct b43_wldev *dev, bool force) +static int b43_gphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if ((new_channel < 1) || (new_channel > 14)) + return -EINVAL; + b43_gphy_channel_switch(dev, new_channel, 0); + + return 0; +} + +static unsigned int b43_gphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 1; /* Default to channel 1 */ +} + +static void b43_gphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) { struct b43_phy *phy = &dev->phy; + u64 hf; + u16 tmp; + int autodiv = 0; - if (!phy->radio_on && !force) - return; + if (antenna == B43_ANTENNA_AUTO0 || antenna == B43_ANTENNA_AUTO1) + autodiv = 1; + + hf = b43_hf_read(dev); + hf &= ~B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); + + tmp = b43_phy_read(dev, B43_PHY_BBANDCFG); + tmp &= ~B43_PHY_BBANDCFG_RXANT; + tmp |= (autodiv ? B43_ANTENNA_AUTO0 : antenna) + << B43_PHY_BBANDCFG_RXANT_SHIFT; + b43_phy_write(dev, B43_PHY_BBANDCFG, tmp); + + if (autodiv) { + tmp = b43_phy_read(dev, B43_PHY_ANTDWELL); + if (antenna == B43_ANTENNA_AUTO0) + tmp &= ~B43_PHY_ANTDWELL_AUTODIV1; + else + tmp |= B43_PHY_ANTDWELL_AUTODIV1; + b43_phy_write(dev, B43_PHY_ANTDWELL, tmp); + } + tmp = b43_phy_read(dev, B43_PHY_ANTWRSETT); + if (autodiv) + tmp |= B43_PHY_ANTWRSETT_ARXDIV; + else + tmp &= ~B43_PHY_ANTWRSETT_ARXDIV; + b43_phy_write(dev, B43_PHY_ANTWRSETT, tmp); + if (phy->rev >= 2) { + tmp = b43_phy_read(dev, B43_PHY_OFDM61); + tmp |= B43_PHY_OFDM61_10; + b43_phy_write(dev, B43_PHY_OFDM61, tmp); + + tmp = + b43_phy_read(dev, B43_PHY_DIVSRCHGAINBACK); + tmp = (tmp & 0xFF00) | 0x15; + b43_phy_write(dev, B43_PHY_DIVSRCHGAINBACK, + tmp); + + if (phy->rev == 2) { + b43_phy_write(dev, B43_PHY_ADIVRELATED, + 8); + } else { + tmp = + b43_phy_read(dev, + B43_PHY_ADIVRELATED); + tmp = (tmp & 0xFF00) | 8; + b43_phy_write(dev, B43_PHY_ADIVRELATED, + tmp); + } + } + if (phy->rev >= 6) + b43_phy_write(dev, B43_PHY_OFDM9B, 0xDC); + + hf |= B43_HF_ANTDIVHELP; + b43_hf_write(dev, hf); +} - switch (phy->type) { - case B43_PHYTYPE_N: - b43_nphy_radio_turn_off(dev); +static int b43_gphy_op_interf_mitigation(struct b43_wldev *dev, + enum b43_interference_mitigation mode) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + int currentmode; + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + if ((phy->rev == 0) || (!phy->gmode)) + return -ENODEV; + + gphy->aci_wlan_automatic = 0; + switch (mode) { + case B43_INTERFMODE_AUTOWLAN: + gphy->aci_wlan_automatic = 1; + if (gphy->aci_enable) + mode = B43_INTERFMODE_MANUALWLAN; + else + mode = B43_INTERFMODE_NONE; break; - case B43_PHYTYPE_A: - b43_radio_write16(dev, 0x0004, 0x00FF); - b43_radio_write16(dev, 0x0005, 0x00FB); - b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008); - b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008); + case B43_INTERFMODE_NONE: + case B43_INTERFMODE_NONWLAN: + case B43_INTERFMODE_MANUALWLAN: break; - case B43_PHYTYPE_G: { - u16 rfover, rfoverval; + default: + return -EINVAL; + } - rfover = b43_phy_read(dev, B43_PHY_RFOVER); - rfoverval = b43_phy_read(dev, B43_PHY_RFOVERVAL); - if (!force) { - phy->radio_off_context.rfover = rfover; - phy->radio_off_context.rfoverval = rfoverval; - phy->radio_off_context.valid = 1; + currentmode = gphy->interfmode; + if (currentmode == mode) + return 0; + if (currentmode != B43_INTERFMODE_NONE) + b43_radio_interference_mitigation_disable(dev, currentmode); + + if (mode == B43_INTERFMODE_NONE) { + gphy->aci_enable = 0; + gphy->aci_hw_rssi = 0; + } else + b43_radio_interference_mitigation_enable(dev, mode); + gphy->interfmode = mode; + + return 0; +} + +/* http://bcm-specs.sipsolutions.net/EstimatePowerOut + * This function converts a TSSI value to dBm in Q5.2 + */ +static s8 b43_gphy_estimate_power_out(struct b43_wldev *dev, s8 tssi) +{ + struct b43_phy_g *gphy = dev->phy.g; + s8 dbm; + s32 tmp; + + tmp = (gphy->tgt_idle_tssi - gphy->cur_idle_tssi + tssi); + tmp = clamp_val(tmp, 0x00, 0x3F); + dbm = gphy->tssi2dbm[tmp]; + + return dbm; +} + +static void b43_put_attenuation_into_ranges(struct b43_wldev *dev, + int *_bbatt, int *_rfatt) +{ + int rfatt = *_rfatt; + int bbatt = *_bbatt; + struct b43_txpower_lo_control *lo = dev->phy.g->lo_control; + + /* Get baseband and radio attenuation values into their permitted ranges. + * Radio attenuation affects power level 4 times as much as baseband. */ + + /* Range constants */ + const int rf_min = lo->rfatt_list.min_val; + const int rf_max = lo->rfatt_list.max_val; + const int bb_min = lo->bbatt_list.min_val; + const int bb_max = lo->bbatt_list.max_val; + + while (1) { + if (rfatt > rf_max && bbatt > bb_max - 4) + break; /* Can not get it into ranges */ + if (rfatt < rf_min && bbatt < bb_min + 4) + break; /* Can not get it into ranges */ + if (bbatt > bb_max && rfatt > rf_max - 1) + break; /* Can not get it into ranges */ + if (bbatt < bb_min && rfatt < rf_min + 1) + break; /* Can not get it into ranges */ + + if (bbatt > bb_max) { + bbatt -= 4; + rfatt += 1; + continue; + } + if (bbatt < bb_min) { + bbatt += 4; + rfatt -= 1; + continue; + } + if (rfatt > rf_max) { + rfatt -= 1; + bbatt += 4; + continue; + } + if (rfatt < rf_min) { + rfatt += 1; + bbatt -= 4; + continue; } - b43_phy_write(dev, B43_PHY_RFOVER, rfover | 0x008C); - b43_phy_write(dev, B43_PHY_RFOVERVAL, rfoverval & 0xFF73); break; } - default: - B43_WARN_ON(1); + + *_rfatt = clamp_val(rfatt, rf_min, rf_max); + *_bbatt = clamp_val(bbatt, bb_min, bb_max); +} + +static void b43_gphy_op_adjust_txpower(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + int rfatt, bbatt; + u8 tx_control; + + spin_lock_irq(&dev->wl->irq_lock); + + /* Calculate the new attenuation values. */ + bbatt = gphy->bbatt.att; + bbatt += gphy->bbatt_delta; + rfatt = gphy->rfatt.att; + rfatt += gphy->rfatt_delta; + + b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); + tx_control = gphy->tx_control; + if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) { + if (rfatt <= 1) { + if (tx_control == 0) { + tx_control = + B43_TXCTL_PA2DB | + B43_TXCTL_TXMIX; + rfatt += 2; + bbatt += 2; + } else if (dev->dev->bus->sprom. + boardflags_lo & + B43_BFL_PACTRL) { + bbatt += 4 * (rfatt - 2); + rfatt = 2; + } + } else if (rfatt > 4 && tx_control) { + tx_control = 0; + if (bbatt < 3) { + rfatt -= 3; + bbatt += 2; + } else { + rfatt -= 2; + bbatt -= 2; + } + } } - phy->radio_on = 0; + /* Save the control values */ + gphy->tx_control = tx_control; + b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt); + gphy->rfatt.att = rfatt; + gphy->bbatt.att = bbatt; + + /* We drop the lock early, so we can sleep during hardware + * adjustment. Possible races with op_recalc_txpower are harmless, + * as we will be called once again in case we raced. */ + spin_unlock_irq(&dev->wl->irq_lock); + + if (b43_debug(dev, B43_DBG_XMITPOWER)) + b43dbg(dev->wl, "Adjusting TX power\n"); + + /* Adjust the hardware */ + b43_phy_lock(dev); + b43_radio_lock(dev); + b43_set_txpower_g(dev, &gphy->bbatt, &gphy->rfatt, + gphy->tx_control); + b43_radio_unlock(dev); + b43_phy_unlock(dev); } + +static enum b43_txpwr_result b43_gphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + unsigned int average_tssi; + int cck_result, ofdm_result; + int estimated_pwr, desired_pwr, pwr_adjust; + int rfatt_delta, bbatt_delta; + unsigned int max_pwr; + + /* First get the average TSSI */ + cck_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_CCK); + ofdm_result = b43_phy_shm_tssi_read(dev, B43_SHM_SH_TSSI_OFDM_G); + if ((cck_result < 0) && (ofdm_result < 0)) { + /* No TSSI information available */ + if (!ignore_tssi) + goto no_adjustment_needed; + cck_result = 0; + ofdm_result = 0; + } + if (cck_result < 0) + average_tssi = ofdm_result; + else if (ofdm_result < 0) + average_tssi = cck_result; + else + average_tssi = (cck_result + ofdm_result) / 2; + /* Merge the average with the stored value. */ + if (likely(gphy->average_tssi != 0xFF)) + average_tssi = (average_tssi + gphy->average_tssi) / 2; + gphy->average_tssi = average_tssi; + B43_WARN_ON(average_tssi >= B43_TSSI_MAX); + + /* Estimate the TX power emission based on the TSSI */ + estimated_pwr = b43_gphy_estimate_power_out(dev, average_tssi); + + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + max_pwr = dev->dev->bus->sprom.maxpwr_bg; + if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) + max_pwr -= 3; /* minus 0.75 */ + if (unlikely(max_pwr >= INT_TO_Q52(30/*dBm*/))) { + b43warn(dev->wl, + "Invalid max-TX-power value in SPROM.\n"); + max_pwr = INT_TO_Q52(20); /* fake it */ + dev->dev->bus->sprom.maxpwr_bg = max_pwr; + } + + /* Get desired power (in Q5.2) */ + if (phy->desired_txpower < 0) + desired_pwr = INT_TO_Q52(0); + else + desired_pwr = INT_TO_Q52(phy->desired_txpower); + /* And limit it. max_pwr already is Q5.2 */ + desired_pwr = clamp_val(desired_pwr, 0, max_pwr); + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + b43dbg(dev->wl, + "[TX power] current = " Q52_FMT + " dBm, desired = " Q52_FMT + " dBm, max = " Q52_FMT "\n", + Q52_ARG(estimated_pwr), + Q52_ARG(desired_pwr), + Q52_ARG(max_pwr)); + } + + /* Calculate the adjustment delta. */ + pwr_adjust = desired_pwr - estimated_pwr; + if (pwr_adjust == 0) + goto no_adjustment_needed; + + /* RF attenuation delta. */ + rfatt_delta = ((pwr_adjust + 7) / 8); + /* Lower attenuation => Bigger power output. Negate it. */ + rfatt_delta = -rfatt_delta; + + /* Baseband attenuation delta. */ + bbatt_delta = pwr_adjust / 2; + /* Lower attenuation => Bigger power output. Negate it. */ + bbatt_delta = -bbatt_delta; + /* RF att affects power level 4 times as much as + * Baseband attennuation. Subtract it. */ + bbatt_delta -= 4 * rfatt_delta; + + if (b43_debug(dev, B43_DBG_XMITPOWER)) { + int dbm = pwr_adjust < 0 ? -pwr_adjust : pwr_adjust; + b43dbg(dev->wl, + "[TX power deltas] %s" Q52_FMT " dBm => " + "bbatt-delta = %d, rfatt-delta = %d\n", + (pwr_adjust < 0 ? "-" : ""), Q52_ARG(dbm), + bbatt_delta, rfatt_delta); + } + /* So do we finally need to adjust something in hardware? */ + if ((rfatt_delta == 0) && (bbatt_delta == 0)) + goto no_adjustment_needed; + + /* Save the deltas for later when we adjust the power. */ + gphy->bbatt_delta = bbatt_delta; + gphy->rfatt_delta = rfatt_delta; + + /* We need to adjust the TX power on the device. */ + return B43_TXPWR_RES_NEED_ADJUST; + +no_adjustment_needed: + return B43_TXPWR_RES_DONE; +} + +static void b43_gphy_op_pwork_15sec(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; + + //TODO: update_aci_moving_average + if (gphy->aci_enable && gphy->aci_wlan_automatic) { + b43_mac_suspend(dev); + if (!gphy->aci_enable && 1 /*TODO: not scanning? */ ) { + if (0 /*TODO: bunch of conditions */ ) { + phy->ops->interf_mitigation(dev, + B43_INTERFMODE_MANUALWLAN); + } + } else if (0 /*TODO*/) { + if (/*(aci_average > 1000) &&*/ !b43_gphy_aci_scan(dev)) + phy->ops->interf_mitigation(dev, B43_INTERFMODE_NONE); + } + b43_mac_enable(dev); + } else if (gphy->interfmode == B43_INTERFMODE_NONWLAN && + phy->rev == 1) { + //TODO: implement rev1 workaround + } + b43_lo_g_maintanance_work(dev); +} + +static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + + if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) + return; + + b43_mac_suspend(dev); + b43_calc_nrssi_slope(dev); + if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) { + u8 old_chan = phy->channel; + + /* VCO Calibration */ + if (old_chan >= 8) + b43_switch_channel(dev, 1); + else + b43_switch_channel(dev, 13); + b43_switch_channel(dev, old_chan); + } + b43_mac_enable(dev); +} + +const struct b43_phy_operations b43_phyops_g = { + .allocate = b43_gphy_op_allocate, + .free = b43_gphy_op_free, + .prepare_structs = b43_gphy_op_prepare_structs, + .prepare_hardware = b43_gphy_op_prepare_hardware, + .init = b43_gphy_op_init, + .exit = b43_gphy_op_exit, + .phy_read = b43_gphy_op_read, + .phy_write = b43_gphy_op_write, + .radio_read = b43_gphy_op_radio_read, + .radio_write = b43_gphy_op_radio_write, + .supports_hwpctl = b43_gphy_op_supports_hwpctl, + .software_rfkill = b43_gphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_gphy_op_switch_channel, + .get_default_chan = b43_gphy_op_get_default_chan, + .set_rx_antenna = b43_gphy_op_set_rx_antenna, + .interf_mitigation = b43_gphy_op_interf_mitigation, + .recalc_txpower = b43_gphy_op_recalc_txpower, + .adjust_txpower = b43_gphy_op_adjust_txpower, + .pwork_15sec = b43_gphy_op_pwork_15sec, + .pwork_60sec = b43_gphy_op_pwork_60sec, +}; diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h new file mode 100644 index 000000000000..718947fd41ae --- /dev/null +++ b/drivers/net/wireless/b43/phy_g.h @@ -0,0 +1,209 @@ +#ifndef LINUX_B43_PHY_G_H_ +#define LINUX_B43_PHY_G_H_ + +/* OFDM PHY registers are defined in the A-PHY header. */ +#include "phy_a.h" + +/* CCK (B) PHY Registers */ +#define B43_PHY_VERSION_CCK B43_PHY_CCK(0x00) /* Versioning register for B-PHY */ +#define B43_PHY_CCKBBANDCFG B43_PHY_CCK(0x01) /* Contains antenna 0/1 control bit */ +#define B43_PHY_PGACTL B43_PHY_CCK(0x15) /* PGA control */ +#define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ +#define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ +#define B43_PHY_PGACTL_UNKNOWN 0xEFA0 +#define B43_PHY_FBCTL1 B43_PHY_CCK(0x18) /* Frequency bandwidth control 1 */ +#define B43_PHY_ITSSI B43_PHY_CCK(0x29) /* Idle TSSI */ +#define B43_PHY_LO_LEAKAGE B43_PHY_CCK(0x2D) /* Measured LO leakage */ +#define B43_PHY_ENERGY B43_PHY_CCK(0x33) /* Energy */ +#define B43_PHY_SYNCCTL B43_PHY_CCK(0x35) +#define B43_PHY_FBCTL2 B43_PHY_CCK(0x38) /* Frequency bandwidth control 2 */ +#define B43_PHY_DACCTL B43_PHY_CCK(0x60) /* DAC control */ +#define B43_PHY_RCCALOVER B43_PHY_CCK(0x78) /* RC calibration override */ + +/* Extended G-PHY Registers */ +#define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ +#define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ +#define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ +#define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ +#define B43_PHY_GTABNR_SHIFT 10 +#define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ +#define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ +#define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ +#define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ +#define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ +#define B43_PHY_RFOVERVAL_EXTLNA 0x8000 +#define B43_PHY_RFOVERVAL_LNA 0x7000 +#define B43_PHY_RFOVERVAL_LNA_SHIFT 12 +#define B43_PHY_RFOVERVAL_PGA 0x0F00 +#define B43_PHY_RFOVERVAL_PGA_SHIFT 8 +#define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ +#define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 +#define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ +#define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ +#define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ +#define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ +#define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ + + +/*** G-PHY table numbers */ +#define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) +#define B43_GTAB_NRSSI B43_GTAB(0x00, 0) +#define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) +#define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) + +u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); +void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); + + +/* Returns the boolean whether "TX Magnification" is enabled. */ +#define has_tx_magnification(phy) \ + (((phy)->rev >= 2) && \ + ((phy)->radio_ver == 0x2050) && \ + ((phy)->radio_rev == 8)) +/* Card uses the loopback gain stuff */ +#define has_loopback_gain(phy) \ + (((phy)->rev > 1) || ((phy)->gmode)) + +/* Radio Attenuation (RF Attenuation) */ +struct b43_rfatt { + u8 att; /* Attenuation value */ + bool with_padmix; /* Flag, PAD Mixer enabled. */ +}; +struct b43_rfatt_list { + /* Attenuation values list */ + const struct b43_rfatt *list; + u8 len; + /* Minimum/Maximum attenuation values */ + u8 min_val; + u8 max_val; +}; + +/* Returns true, if the values are the same. */ +static inline bool b43_compare_rfatt(const struct b43_rfatt *a, + const struct b43_rfatt *b) +{ + return ((a->att == b->att) && + (a->with_padmix == b->with_padmix)); +} + +/* Baseband Attenuation */ +struct b43_bbatt { + u8 att; /* Attenuation value */ +}; +struct b43_bbatt_list { + /* Attenuation values list */ + const struct b43_bbatt *list; + u8 len; + /* Minimum/Maximum attenuation values */ + u8 min_val; + u8 max_val; +}; + +/* Returns true, if the values are the same. */ +static inline bool b43_compare_bbatt(const struct b43_bbatt *a, + const struct b43_bbatt *b) +{ + return (a->att == b->att); +} + +/* tx_control bits. */ +#define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ +#define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ +#define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ + +struct b43_txpower_lo_control; + +struct b43_phy_g { + /* ACI (adjacent channel interference) flags. */ + bool aci_enable; + bool aci_wlan_automatic; + bool aci_hw_rssi; + + /* Radio switched on/off */ + bool radio_on; + struct { + /* Values saved when turning the radio off. + * They are needed when turning it on again. */ + bool valid; + u16 rfover; + u16 rfoverval; + } radio_off_context; + + u16 minlowsig[2]; + u16 minlowsigpos[2]; + + /* Pointer to the table used to convert a + * TSSI value to dBm-Q5.2 */ + const s8 *tssi2dbm; + /* tssi2dbm is kmalloc()ed. Only used for free()ing. */ + bool dyn_tssi_tbl; + /* Target idle TSSI */ + int tgt_idle_tssi; + /* Current idle TSSI */ + int cur_idle_tssi; + /* The current average TSSI. + * Needs irq_lock, as it's updated in the IRQ path. */ + u8 average_tssi; + /* Current TX power level attenuation control values */ + struct b43_bbatt bbatt; + struct b43_rfatt rfatt; + u8 tx_control; /* B43_TXCTL_XXX */ + /* The calculated attenuation deltas that are used later + * when adjusting the actual power output. */ + int bbatt_delta; + int rfatt_delta; + + /* LocalOscillator control values. */ + struct b43_txpower_lo_control *lo_control; + /* Values from b43_calc_loopback_gain() */ + s16 max_lb_gain; /* Maximum Loopback gain in hdB */ + s16 trsw_rx_gain; /* TRSW RX gain in hdB */ + s16 lna_lod_gain; /* LNA lod */ + s16 lna_gain; /* LNA */ + s16 pga_gain; /* PGA */ + + /* Current Interference Mitigation mode */ + int interfmode; + /* Stack of saved values from the Interference Mitigation code. + * Each value in the stack is layed out as follows: + * bit 0-11: offset + * bit 12-15: register ID + * bit 16-32: value + * register ID is: 0x1 PHY, 0x2 Radio, 0x3 ILT + */ +#define B43_INTERFSTACK_SIZE 26 + u32 interfstack[B43_INTERFSTACK_SIZE]; //FIXME: use a data structure + + /* Saved values from the NRSSI Slope calculation */ + s16 nrssi[2]; + s32 nrssislope; + /* In memory nrssi lookup table. */ + s8 nrssi_lt[64]; + + u16 lofcal; + + u16 initval; //FIXME rename? + + /* The device does address auto increment for the OFDM tables. + * We cache the previously used address here and omit the address + * write on the next table access, if possible. */ + u16 ofdmtab_addr; /* The address currently set in hardware. */ + enum { /* The last data flow direction. */ + B43_OFDMTAB_DIRECTION_UNKNOWN = 0, + B43_OFDMTAB_DIRECTION_READ, + B43_OFDMTAB_DIRECTION_WRITE, + } ofdmtab_addr_direction; +}; + +void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev, + u16 baseband_attenuation); +void b43_gphy_channel_switch(struct b43_wldev *dev, + unsigned int channel, + bool synthetic_pu_workaround); +u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev, + s16 pab0, s16 pab1, s16 pab2); + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_g; + +#endif /* LINUX_B43_PHY_G_H_ */ diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c new file mode 100644 index 000000000000..c5d9dc3667c0 --- /dev/null +++ b/drivers/net/wireless/b43/phy_lp.c @@ -0,0 +1,155 @@ +/* + + Broadcom B43 wireless driver + IEEE 802.11g LP-PHY driver + + Copyright (c) 2008 Michael Buesch <mb@bu3sch.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, + Boston, MA 02110-1301, USA. + +*/ + +#include "b43.h" +#include "phy_lp.h" +#include "phy_common.h" + + +static int b43_lpphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy; + + lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL); + if (!lpphy) + return -ENOMEM; + dev->phy.lp = lpphy; + + return 0; +} + +static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_lp *lpphy = phy->lp; + + memset(lpphy, 0, sizeof(*lpphy)); + + //TODO +} + +static void b43_lpphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + + kfree(lpphy); + dev->phy.lp = NULL; +} + +static int b43_lpphy_op_init(struct b43_wldev *dev) +{ + //TODO + + return 0; +} + +static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* LP-PHY needs a special bit set for read access */ + if (dev->phy.rev < 2) { + if (reg != 0x4001) + reg |= 0x100; + } else + reg |= 0x200; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{ + //TODO +} + +static int b43_lpphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + //TODO + return 0; +} + +static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev) +{ + return 1; /* Default to channel 1 */ +} + +static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna) +{ + //TODO +} + +static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev) +{ + //TODO +} + +static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{ + //TODO + return B43_TXPWR_RES_DONE; +} + + +const struct b43_phy_operations b43_phyops_lp = { + .allocate = b43_lpphy_op_allocate, + .free = b43_lpphy_op_free, + .prepare_structs = b43_lpphy_op_prepare_structs, + .init = b43_lpphy_op_init, + .phy_read = b43_lpphy_op_read, + .phy_write = b43_lpphy_op_write, + .radio_read = b43_lpphy_op_radio_read, + .radio_write = b43_lpphy_op_radio_write, + .software_rfkill = b43_lpphy_op_software_rfkill, + .switch_analog = b43_phyop_switch_analog_generic, + .switch_channel = b43_lpphy_op_switch_channel, + .get_default_chan = b43_lpphy_op_get_default_chan, + .set_rx_antenna = b43_lpphy_op_set_rx_antenna, + .recalc_txpower = b43_lpphy_op_recalc_txpower, + .adjust_txpower = b43_lpphy_op_adjust_txpower, +}; diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h new file mode 100644 index 000000000000..b0b5357abf93 --- /dev/null +++ b/drivers/net/wireless/b43/phy_lp.h @@ -0,0 +1,540 @@ +#ifndef LINUX_B43_PHY_LP_H_ +#define LINUX_B43_PHY_LP_H_ + +/* Definitions for the LP-PHY */ + + + + +#define B43_LP_RADIO(radio_reg) (radio_reg) +#define B43_LP_NORTH(radio_reg) B43_LP_RADIO(radio_reg) +#define B43_LP_SOUTH(radio_reg) B43_LP_RADIO((radio_reg) | 0x4000) + + +/*** Broadcom 2062 NORTH radio registers ***/ +#define B2062_N_COMM1 B43_LP_NORTH(0x000) /* Common 01 (north) */ +#define B2062_N_COMM2 B43_LP_NORTH(0x002) /* Common 02 (north) */ +#define B2062_N_COMM3 B43_LP_NORTH(0x003) /* Common 03 (north) */ +#define B2062_N_COMM4 B43_LP_NORTH(0x004) /* Common 04 (north) */ +#define B2062_N_COMM5 B43_LP_NORTH(0x005) /* Common 05 (north) */ +#define B2062_N_COMM6 B43_LP_NORTH(0x006) /* Common 06 (north) */ +#define B2062_N_COMM7 B43_LP_NORTH(0x007) /* Common 07 (north) */ +#define B2062_N_COMM8 B43_LP_NORTH(0x008) /* Common 08 (north) */ +#define B2062_N_COMM9 B43_LP_NORTH(0x009) /* Common 09 (north) */ +#define B2062_N_COMM10 B43_LP_NORTH(0x00A) /* Common 10 (north) */ +#define B2062_N_COMM11 B43_LP_NORTH(0x00B) /* Common 11 (north) */ +#define B2062_N_COMM12 B43_LP_NORTH(0x00C) /* Common 12 (north) */ +#define B2062_N_COMM13 B43_LP_NORTH(0x00D) /* Common 13 (north) */ +#define B2062_N_COMM14 B43_LP_NORTH(0x00E) /* Common 14 (north) */ +#define B2062_N_COMM15 B43_LP_NORTH(0x00F) /* Common 15 (north) */ +#define B2062_N_PDN_CTL0 B43_LP_NORTH(0x010) /* PDN Control 0 (north) */ +#define B2062_N_PDN_CTL1 B43_LP_NORTH(0x011) /* PDN Control 1 (north) */ +#define B2062_N_PDN_CTL2 B43_LP_NORTH(0x012) /* PDN Control 2 (north) */ +#define B2062_N_PDN_CTL3 B43_LP_NORTH(0x013) /* PDN Control 3 (north) */ +#define B2062_N_PDN_CTL4 B43_LP_NORTH(0x014) /* PDN Control 4 (north) */ +#define B2062_N_GEN_CTL0 B43_LP_NORTH(0x015) /* GEN Control 0 (north) */ +#define B2062_N_IQ_CALIB B43_LP_NORTH(0x016) /* IQ Calibration (north) */ +#define B2062_N_LGENC B43_LP_NORTH(0x017) /* LGENC (north) */ +#define B2062_N_LGENA_LPF B43_LP_NORTH(0x018) /* LGENA LPF (north) */ +#define B2062_N_LGENA_BIAS0 B43_LP_NORTH(0x019) /* LGENA Bias 0 (north) */ +#define B2062_N_LGNEA_BIAS1 B43_LP_NORTH(0x01A) /* LGNEA Bias 1 (north) */ +#define B2062_N_LGENA_CTL0 B43_LP_NORTH(0x01B) /* LGENA Control 0 (north) */ +#define B2062_N_LGENA_CTL1 B43_LP_NORTH(0x01C) /* LGENA Control 1 (north) */ +#define B2062_N_LGENA_CTL2 B43_LP_NORTH(0x01D) /* LGENA Control 2 (north) */ +#define B2062_N_LGENA_TUNE0 B43_LP_NORTH(0x01E) /* LGENA Tune 0 (north) */ +#define B2062_N_LGENA_TUNE1 B43_LP_NORTH(0x01F) /* LGENA Tune 1 (north) */ +#define B2062_N_LGENA_TUNE2 B43_LP_NORTH(0x020) /* LGENA Tune 2 (north) */ +#define B2062_N_LGENA_TUNE3 B43_LP_NORTH(0x021) /* LGENA Tune 3 (north) */ +#define B2062_N_LGENA_CTL3 B43_LP_NORTH(0x022) /* LGENA Control 3 (north) */ +#define B2062_N_LGENA_CTL4 B43_LP_NORTH(0x023) /* LGENA Control 4 (north) */ +#define B2062_N_LGENA_CTL5 B43_LP_NORTH(0x024) /* LGENA Control 5 (north) */ +#define B2062_N_LGENA_CTL6 B43_LP_NORTH(0x025) /* LGENA Control 6 (north) */ +#define B2062_N_LGENA_CTL7 B43_LP_NORTH(0x026) /* LGENA Control 7 (north) */ +#define B2062_N_RXA_CTL0 B43_LP_NORTH(0x027) /* RXA Control 0 (north) */ +#define B2062_N_RXA_CTL1 B43_LP_NORTH(0x028) /* RXA Control 1 (north) */ +#define B2062_N_RXA_CTL2 B43_LP_NORTH(0x029) /* RXA Control 2 (north) */ +#define B2062_N_RXA_CTL3 B43_LP_NORTH(0x02A) /* RXA Control 3 (north) */ +#define B2062_N_RXA_CTL4 B43_LP_NORTH(0x02B) /* RXA Control 4 (north) */ +#define B2062_N_RXA_CTL5 B43_LP_NORTH(0x02C) /* RXA Control 5 (north) */ +#define B2062_N_RXA_CTL6 B43_LP_NORTH(0x02D) /* RXA Control 6 (north) */ +#define B2062_N_RXA_CTL7 B43_LP_NORTH(0x02E) /* RXA Control 7 (north) */ +#define B2062_N_RXBB_CTL0 B43_LP_NORTH(0x02F) /* RXBB Control 0 (north) */ +#define B2062_N_RXBB_CTL1 B43_LP_NORTH(0x030) /* RXBB Control 1 (north) */ +#define B2062_N_RXBB_CTL2 B43_LP_NORTH(0x031) /* RXBB Control 2 (north) */ +#define B2062_N_RXBB_GAIN0 B43_LP_NORTH(0x032) /* RXBB Gain 0 (north) */ +#define B2062_N_RXBB_GAIN1 B43_LP_NORTH(0x033) /* RXBB Gain 1 (north) */ +#define B2062_N_RXBB_GAIN2 B43_LP_NORTH(0x034) /* RXBB Gain 2 (north) */ +#define B2062_N_RXBB_GAIN3 B43_LP_NORTH(0x035) /* RXBB Gain 3 (north) */ +#define B2062_N_RXBB_RSSI0 B43_LP_NORTH(0x036) /* RXBB RSSI 0 (north) */ +#define B2062_N_RXBB_RSSI1 B43_LP_NORTH(0x037) /* RXBB RSSI 1 (north) */ +#define B2062_N_RXBB_CALIB0 B43_LP_NORTH(0x038) /* RXBB Calibration0 (north) */ +#define B2062_N_RXBB_CALIB1 B43_LP_NORTH(0x039) /* RXBB Calibration1 (north) */ +#define B2062_N_RXBB_CALIB2 B43_LP_NORTH(0x03A) /* RXBB Calibration2 (north) */ +#define B2062_N_RXBB_BIAS0 B43_LP_NORTH(0x03B) /* RXBB Bias 0 (north) */ +#define B2062_N_RXBB_BIAS1 B43_LP_NORTH(0x03C) /* RXBB Bias 1 (north) */ +#define B2062_N_RXBB_BIAS2 B43_LP_NORTH(0x03D) /* RXBB Bias 2 (north) */ +#define B2062_N_RXBB_BIAS3 B43_LP_NORTH(0x03E) /* RXBB Bias 3 (north) */ +#define B2062_N_RXBB_BIAS4 B43_LP_NORTH(0x03F) /* RXBB Bias 4 (north) */ +#define B2062_N_RXBB_BIAS5 B43_LP_NORTH(0x040) /* RXBB Bias 5 (north) */ +#define B2062_N_RXBB_RSSI2 B43_LP_NORTH(0x041) /* RXBB RSSI 2 (north) */ +#define B2062_N_RXBB_RSSI3 B43_LP_NORTH(0x042) /* RXBB RSSI 3 (north) */ +#define B2062_N_RXBB_RSSI4 B43_LP_NORTH(0x043) /* RXBB RSSI 4 (north) */ +#define B2062_N_RXBB_RSSI5 B43_LP_NORTH(0x044) /* RXBB RSSI 5 (north) */ +#define B2062_N_TX_CTL0 B43_LP_NORTH(0x045) /* TX Control 0 (north) */ +#define B2062_N_TX_CTL1 B43_LP_NORTH(0x046) /* TX Control 1 (north) */ +#define B2062_N_TX_CTL2 B43_LP_NORTH(0x047) /* TX Control 2 (north) */ +#define B2062_N_TX_CTL3 B43_LP_NORTH(0x048) /* TX Control 3 (north) */ +#define B2062_N_TX_CTL4 B43_LP_NORTH(0x049) /* TX Control 4 (north) */ +#define B2062_N_TX_CTL5 B43_LP_NORTH(0x04A) /* TX Control 5 (north) */ +#define B2062_N_TX_CTL6 B43_LP_NORTH(0x04B) /* TX Control 6 (north) */ +#define B2062_N_TX_CTL7 B43_LP_NORTH(0x04C) /* TX Control 7 (north) */ +#define B2062_N_TX_CTL8 B43_LP_NORTH(0x04D) /* TX Control 8 (north) */ +#define B2062_N_TX_CTL9 B43_LP_NORTH(0x04E) /* TX Control 9 (north) */ +#define B2062_N_TX_CTL_A B43_LP_NORTH(0x04F) /* TX Control A (north) */ +#define B2062_N_TX_GC2G B43_LP_NORTH(0x050) /* TX GC2G (north) */ +#define B2062_N_TX_GC5G B43_LP_NORTH(0x051) /* TX GC5G (north) */ +#define B2062_N_TX_TUNE B43_LP_NORTH(0x052) /* TX Tune (north) */ +#define B2062_N_TX_PAD B43_LP_NORTH(0x053) /* TX PAD (north) */ +#define B2062_N_TX_PGA B43_LP_NORTH(0x054) /* TX PGA (north) */ +#define B2062_N_TX_PADAUX B43_LP_NORTH(0x055) /* TX PADAUX (north) */ +#define B2062_N_TX_PGAAUX B43_LP_NORTH(0x056) /* TX PGAAUX (north) */ +#define B2062_N_TSSI_CTL0 B43_LP_NORTH(0x057) /* TSSI Control 0 (north) */ +#define B2062_N_TSSI_CTL1 B43_LP_NORTH(0x058) /* TSSI Control 1 (north) */ +#define B2062_N_TSSI_CTL2 B43_LP_NORTH(0x059) /* TSSI Control 2 (north) */ +#define B2062_N_IQ_CALIB_CTL0 B43_LP_NORTH(0x05A) /* IQ Calibration Control 0 (north) */ +#define B2062_N_IQ_CALIB_CTL1 B43_LP_NORTH(0x05B) /* IQ Calibration Control 1 (north) */ +#define B2062_N_IQ_CALIB_CTL2 B43_LP_NORTH(0x05C) /* IQ Calibration Control 2 (north) */ +#define B2062_N_CALIB_TS B43_LP_NORTH(0x05D) /* Calibration TS (north) */ +#define B2062_N_CALIB_CTL0 B43_LP_NORTH(0x05E) /* Calibration Control 0 (north) */ +#define B2062_N_CALIB_CTL1 B43_LP_NORTH(0x05F) /* Calibration Control 1 (north) */ +#define B2062_N_CALIB_CTL2 B43_LP_NORTH(0x060) /* Calibration Control 2 (north) */ +#define B2062_N_CALIB_CTL3 B43_LP_NORTH(0x061) /* Calibration Control 3 (north) */ +#define B2062_N_CALIB_CTL4 B43_LP_NORTH(0x062) /* Calibration Control 4 (north) */ +#define B2062_N_CALIB_DBG0 B43_LP_NORTH(0x063) /* Calibration Debug 0 (north) */ +#define B2062_N_CALIB_DBG1 B43_LP_NORTH(0x064) /* Calibration Debug 1 (north) */ +#define B2062_N_CALIB_DBG2 B43_LP_NORTH(0x065) /* Calibration Debug 2 (north) */ +#define B2062_N_CALIB_DBG3 B43_LP_NORTH(0x066) /* Calibration Debug 3 (north) */ +#define B2062_N_PSENSE_CTL0 B43_LP_NORTH(0x069) /* PSENSE Control 0 (north) */ +#define B2062_N_PSENSE_CTL1 B43_LP_NORTH(0x06A) /* PSENSE Control 1 (north) */ +#define B2062_N_PSENSE_CTL2 B43_LP_NORTH(0x06B) /* PSENSE Control 2 (north) */ +#define B2062_N_TEST_BUF0 B43_LP_NORTH(0x06C) /* TEST BUF0 (north) */ + +/*** Broadcom 2062 SOUTH radio registers ***/ +#define B2062_S_COMM1 B43_LP_SOUTH(0x000) /* Common 01 (south) */ +#define B2062_S_RADIO_ID_CODE B43_LP_SOUTH(0x001) /* Radio ID code (south) */ +#define B2062_S_COMM2 B43_LP_SOUTH(0x002) /* Common 02 (south) */ +#define B2062_S_COMM3 B43_LP_SOUTH(0x003) /* Common 03 (south) */ +#define B2062_S_COMM4 B43_LP_SOUTH(0x004) /* Common 04 (south) */ +#define B2062_S_COMM5 B43_LP_SOUTH(0x005) /* Common 05 (south) */ +#define B2062_S_COMM6 B43_LP_SOUTH(0x006) /* Common 06 (south) */ +#define B2062_S_COMM7 B43_LP_SOUTH(0x007) /* Common 07 (south) */ +#define B2062_S_COMM8 B43_LP_SOUTH(0x008) /* Common 08 (south) */ +#define B2062_S_COMM9 B43_LP_SOUTH(0x009) /* Common 09 (south) */ +#define B2062_S_COMM10 B43_LP_SOUTH(0x00A) /* Common 10 (south) */ +#define B2062_S_COMM11 B43_LP_SOUTH(0x00B) /* Common 11 (south) */ +#define B2062_S_COMM12 B43_LP_SOUTH(0x00C) /* Common 12 (south) */ +#define B2062_S_COMM13 B43_LP_SOUTH(0x00D) /* Common 13 (south) */ +#define B2062_S_COMM14 B43_LP_SOUTH(0x00E) /* Common 14 (south) */ +#define B2062_S_COMM15 B43_LP_SOUTH(0x00F) /* Common 15 (south) */ +#define B2062_S_PDS_CTL0 B43_LP_SOUTH(0x010) /* PDS Control 0 (south) */ +#define B2062_S_PDS_CTL1 B43_LP_SOUTH(0x011) /* PDS Control 1 (south) */ +#define B2062_S_PDS_CTL2 B43_LP_SOUTH(0x012) /* PDS Control 2 (south) */ +#define B2062_S_PDS_CTL3 B43_LP_SOUTH(0x013) /* PDS Control 3 (south) */ +#define B2062_S_BG_CTL0 B43_LP_SOUTH(0x014) /* BG Control 0 (south) */ +#define B2062_S_BG_CTL1 B43_LP_SOUTH(0x015) /* BG Control 1 (south) */ +#define B2062_S_BG_CTL2 B43_LP_SOUTH(0x016) /* BG Control 2 (south) */ +#define B2062_S_LGENG_CTL0 B43_LP_SOUTH(0x017) /* LGENG Control 00 (south) */ +#define B2062_S_LGENG_CTL1 B43_LP_SOUTH(0x018) /* LGENG Control 01 (south) */ +#define B2062_S_LGENG_CTL2 B43_LP_SOUTH(0x019) /* LGENG Control 02 (south) */ +#define B2062_S_LGENG_CTL3 B43_LP_SOUTH(0x01A) /* LGENG Control 03 (south) */ +#define B2062_S_LGENG_CTL4 B43_LP_SOUTH(0x01B) /* LGENG Control 04 (south) */ +#define B2062_S_LGENG_CTL5 B43_LP_SOUTH(0x01C) /* LGENG Control 05 (south) */ +#define B2062_S_LGENG_CTL6 B43_LP_SOUTH(0x01D) /* LGENG Control 06 (south) */ +#define B2062_S_LGENG_CTL7 B43_LP_SOUTH(0x01E) /* LGENG Control 07 (south) */ +#define B2062_S_LGENG_CTL8 B43_LP_SOUTH(0x01F) /* LGENG Control 08 (south) */ +#define B2062_S_LGENG_CTL9 B43_LP_SOUTH(0x020) /* LGENG Control 09 (south) */ +#define B2062_S_LGENG_CTL10 B43_LP_SOUTH(0x021) /* LGENG Control 10 (south) */ +#define B2062_S_LGENG_CTL11 B43_LP_SOUTH(0x022) /* LGENG Control 11 (south) */ +#define B2062_S_REFPLL_CTL0 B43_LP_SOUTH(0x023) /* REFPLL Control 00 (south) */ +#define B2062_S_REFPLL_CTL1 B43_LP_SOUTH(0x024) /* REFPLL Control 01 (south) */ +#define B2062_S_REFPLL_CTL2 B43_LP_SOUTH(0x025) /* REFPLL Control 02 (south) */ +#define B2062_S_REFPLL_CTL3 B43_LP_SOUTH(0x026) /* REFPLL Control 03 (south) */ +#define B2062_S_REFPLL_CTL4 B43_LP_SOUTH(0x027) /* REFPLL Control 04 (south) */ +#define B2062_S_REFPLL_CTL5 B43_LP_SOUTH(0x028) /* REFPLL Control 05 (south) */ +#define B2062_S_REFPLL_CTL6 B43_LP_SOUTH(0x029) /* REFPLL Control 06 (south) */ +#define B2062_S_REFPLL_CTL7 B43_LP_SOUTH(0x02A) /* REFPLL Control 07 (south) */ +#define B2062_S_REFPLL_CTL8 B43_LP_SOUTH(0x02B) /* REFPLL Control 08 (south) */ +#define B2062_S_REFPLL_CTL9 B43_LP_SOUTH(0x02C) /* REFPLL Control 09 (south) */ +#define B2062_S_REFPLL_CTL10 B43_LP_SOUTH(0x02D) /* REFPLL Control 10 (south) */ +#define B2062_S_REFPLL_CTL11 B43_LP_SOUTH(0x02E) /* REFPLL Control 11 (south) */ +#define B2062_S_REFPLL_CTL12 B43_LP_SOUTH(0x02F) /* REFPLL Control 12 (south) */ +#define B2062_S_REFPLL_CTL13 B43_LP_SOUTH(0x030) /* REFPLL Control 13 (south) */ +#define B2062_S_REFPLL_CTL14 B43_LP_SOUTH(0x031) /* REFPLL Control 14 (south) */ +#define B2062_S_REFPLL_CTL15 B43_LP_SOUTH(0x032) /* REFPLL Control 15 (south) */ +#define B2062_S_REFPLL_CTL16 B43_LP_SOUTH(0x033) /* REFPLL Control 16 (south) */ +#define B2062_S_RFPLL_CTL0 B43_LP_SOUTH(0x034) /* RFPLL Control 00 (south) */ +#define B2062_S_RFPLL_CTL1 B43_LP_SOUTH(0x035) /* RFPLL Control 01 (south) */ +#define B2062_S_RFPLL_CTL2 B43_LP_SOUTH(0x036) /* RFPLL Control 02 (south) */ +#define B2062_S_RFPLL_CTL3 B43_LP_SOUTH(0x037) /* RFPLL Control 03 (south) */ +#define B2062_S_RFPLL_CTL4 B43_LP_SOUTH(0x038) /* RFPLL Control 04 (south) */ +#define B2062_S_RFPLL_CTL5 B43_LP_SOUTH(0x039) /* RFPLL Control 05 (south) */ +#define B2062_S_RFPLL_CTL6 B43_LP_SOUTH(0x03A) /* RFPLL Control 06 (south) */ +#define B2062_S_RFPLL_CTL7 B43_LP_SOUTH(0x03B) /* RFPLL Control 07 (south) */ +#define B2062_S_RFPLL_CTL8 B43_LP_SOUTH(0x03C) /* RFPLL Control 08 (south) */ +#define B2062_S_RFPLL_CTL9 B43_LP_SOUTH(0x03D) /* RFPLL Control 09 (south) */ +#define B2062_S_RFPLL_CTL10 B43_LP_SOUTH(0x03E) /* RFPLL Control 10 (south) */ +#define B2062_S_RFPLL_CTL11 B43_LP_SOUTH(0x03F) /* RFPLL Control 11 (south) */ +#define B2062_S_RFPLL_CTL12 B43_LP_SOUTH(0x040) /* RFPLL Control 12 (south) */ +#define B2062_S_RFPLL_CTL13 B43_LP_SOUTH(0x041) /* RFPLL Control 13 (south) */ +#define B2062_S_RFPLL_CTL14 B43_LP_SOUTH(0x042) /* RFPLL Control 14 (south) */ +#define B2062_S_RFPLL_CTL15 B43_LP_SOUTH(0x043) /* RFPLL Control 15 (south) */ +#define B2062_S_RFPLL_CTL16 B43_LP_SOUTH(0x044) /* RFPLL Control 16 (south) */ +#define B2062_S_RFPLL_CTL17 B43_LP_SOUTH(0x045) /* RFPLL Control 17 (south) */ +#define B2062_S_RFPLL_CTL18 B43_LP_SOUTH(0x046) /* RFPLL Control 18 (south) */ +#define B2062_S_RFPLL_CTL19 B43_LP_SOUTH(0x047) /* RFPLL Control 19 (south) */ +#define B2062_S_RFPLL_CTL20 B43_LP_SOUTH(0x048) /* RFPLL Control 20 (south) */ +#define B2062_S_RFPLL_CTL21 B43_LP_SOUTH(0x049) /* RFPLL Control 21 (south) */ +#define B2062_S_RFPLL_CTL22 B43_LP_SOUTH(0x04A) /* RFPLL Control 22 (south) */ +#define B2062_S_RFPLL_CTL23 B43_LP_SOUTH(0x04B) /* RFPLL Control 23 (south) */ +#define B2062_S_RFPLL_CTL24 B43_LP_SOUTH(0x04C) /* RFPLL Control 24 (south) */ +#define B2062_S_RFPLL_CTL25 B43_LP_SOUTH(0x04D) /* RFPLL Control 25 (south) */ +#define B2062_S_RFPLL_CTL26 B43_LP_SOUTH(0x04E) /* RFPLL Control 26 (south) */ +#define B2062_S_RFPLL_CTL27 B43_LP_SOUTH(0x04F) /* RFPLL Control 27 (south) */ +#define B2062_S_RFPLL_CTL28 B43_LP_SOUTH(0x050) /* RFPLL Control 28 (south) */ +#define B2062_S_RFPLL_CTL29 B43_LP_SOUTH(0x051) /* RFPLL Control 29 (south) */ +#define B2062_S_RFPLL_CTL30 B43_LP_SOUTH(0x052) /* RFPLL Control 30 (south) */ +#define B2062_S_RFPLL_CTL31 B43_LP_SOUTH(0x053) /* RFPLL Control 31 (south) */ +#define B2062_S_RFPLL_CTL32 B43_LP_SOUTH(0x054) /* RFPLL Control 32 (south) */ +#define B2062_S_RFPLL_CTL33 B43_LP_SOUTH(0x055) /* RFPLL Control 33 (south) */ +#define B2062_S_RFPLL_CTL34 B43_LP_SOUTH(0x056) /* RFPLL Control 34 (south) */ +#define B2062_S_RXG_CNT0 B43_LP_SOUTH(0x057) /* RXG Counter 00 (south) */ +#define B2062_S_RXG_CNT1 B43_LP_SOUTH(0x058) /* RXG Counter 01 (south) */ +#define B2062_S_RXG_CNT2 B43_LP_SOUTH(0x059) /* RXG Counter 02 (south) */ +#define B2062_S_RXG_CNT3 B43_LP_SOUTH(0x05A) /* RXG Counter 03 (south) */ +#define B2062_S_RXG_CNT4 B43_LP_SOUTH(0x05B) /* RXG Counter 04 (south) */ +#define B2062_S_RXG_CNT5 B43_LP_SOUTH(0x05C) /* RXG Counter 05 (south) */ +#define B2062_S_RXG_CNT6 B43_LP_SOUTH(0x05D) /* RXG Counter 06 (south) */ +#define B2062_S_RXG_CNT7 B43_LP_SOUTH(0x05E) /* RXG Counter 07 (south) */ +#define B2062_S_RXG_CNT8 B43_LP_SOUTH(0x05F) /* RXG Counter 08 (south) */ +#define B2062_S_RXG_CNT9 B43_LP_SOUTH(0x060) /* RXG Counter 09 (south) */ +#define B2062_S_RXG_CNT10 B43_LP_SOUTH(0x061) /* RXG Counter 10 (south) */ +#define B2062_S_RXG_CNT11 B43_LP_SOUTH(0x062) /* RXG Counter 11 (south) */ +#define B2062_S_RXG_CNT12 B43_LP_SOUTH(0x063) /* RXG Counter 12 (south) */ +#define B2062_S_RXG_CNT13 B43_LP_SOUTH(0x064) /* RXG Counter 13 (south) */ +#define B2062_S_RXG_CNT14 B43_LP_SOUTH(0x065) /* RXG Counter 14 (south) */ +#define B2062_S_RXG_CNT15 B43_LP_SOUTH(0x066) /* RXG Counter 15 (south) */ +#define B2062_S_RXG_CNT16 B43_LP_SOUTH(0x067) /* RXG Counter 16 (south) */ +#define B2062_S_RXG_CNT17 B43_LP_SOUTH(0x068) /* RXG Counter 17 (south) */ + + + +/*** Broadcom 2063 radio registers ***/ +#define B2063_RADIO_ID_CODE B43_LP_RADIO(0x001) /* Radio ID code */ +#define B2063_COMM1 B43_LP_RADIO(0x000) /* Common 01 */ +#define B2063_COMM2 B43_LP_RADIO(0x002) /* Common 02 */ +#define B2063_COMM3 B43_LP_RADIO(0x003) /* Common 03 */ +#define B2063_COMM4 B43_LP_RADIO(0x004) /* Common 04 */ +#define B2063_COMM5 B43_LP_RADIO(0x005) /* Common 05 */ +#define B2063_COMM6 B43_LP_RADIO(0x006) /* Common 06 */ +#define B2063_COMM7 B43_LP_RADIO(0x007) /* Common 07 */ +#define B2063_COMM8 B43_LP_RADIO(0x008) /* Common 08 */ +#define B2063_COMM9 B43_LP_RADIO(0x009) /* Common 09 */ +#define B2063_COMM10 B43_LP_RADIO(0x00A) /* Common 10 */ +#define B2063_COMM11 B43_LP_RADIO(0x00B) /* Common 11 */ +#define B2063_COMM12 B43_LP_RADIO(0x00C) /* Common 12 */ +#define B2063_COMM13 B43_LP_RADIO(0x00D) /* Common 13 */ +#define B2063_COMM14 B43_LP_RADIO(0x00E) /* Common 14 */ +#define B2063_COMM15 B43_LP_RADIO(0x00F) /* Common 15 */ +#define B2063_COMM16 B43_LP_RADIO(0x010) /* Common 16 */ +#define B2063_COMM17 B43_LP_RADIO(0x011) /* Common 17 */ +#define B2063_COMM18 B43_LP_RADIO(0x012) /* Common 18 */ +#define B2063_COMM19 B43_LP_RADIO(0x013) /* Common 19 */ +#define B2063_COMM20 B43_LP_RADIO(0x014) /* Common 20 */ +#define B2063_COMM21 B43_LP_RADIO(0x015) /* Common 21 */ +#define B2063_COMM22 B43_LP_RADIO(0x016) /* Common 22 */ +#define B2063_COMM23 B43_LP_RADIO(0x017) /* Common 23 */ +#define B2063_COMM24 B43_LP_RADIO(0x018) /* Common 24 */ +#define B2063_PWR_SWITCH_CTL B43_LP_RADIO(0x019) /* POWER SWITCH Control */ +#define B2063_PLL_SP1 B43_LP_RADIO(0x01A) /* PLL SP 1 */ +#define B2063_PLL_SP2 B43_LP_RADIO(0x01B) /* PLL SP 2 */ +#define B2063_LOGEN_SP1 B43_LP_RADIO(0x01C) /* LOGEN SP 1 */ +#define B2063_LOGEN_SP2 B43_LP_RADIO(0x01D) /* LOGEN SP 2 */ +#define B2063_LOGEN_SP3 B43_LP_RADIO(0x01E) /* LOGEN SP 3 */ +#define B2063_LOGEN_SP4 B43_LP_RADIO(0x01F) /* LOGEN SP 4 */ +#define B2063_LOGEN_SP5 B43_LP_RADIO(0x020) /* LOGEN SP 5 */ +#define B2063_G_RX_SP1 B43_LP_RADIO(0x021) /* G RX SP 1 */ +#define B2063_G_RX_SP2 B43_LP_RADIO(0x022) /* G RX SP 2 */ +#define B2063_G_RX_SP3 B43_LP_RADIO(0x023) /* G RX SP 3 */ +#define B2063_G_RX_SP4 B43_LP_RADIO(0x024) /* G RX SP 4 */ +#define B2063_G_RX_SP5 B43_LP_RADIO(0x025) /* G RX SP 5 */ +#define B2063_G_RX_SP6 B43_LP_RADIO(0x026) /* G RX SP 6 */ +#define B2063_G_RX_SP7 B43_LP_RADIO(0x027) /* G RX SP 7 */ +#define B2063_G_RX_SP8 B43_LP_RADIO(0x028) /* G RX SP 8 */ +#define B2063_G_RX_SP9 B43_LP_RADIO(0x029) /* G RX SP 9 */ +#define B2063_G_RX_SP10 B43_LP_RADIO(0x02A) /* G RX SP 10 */ +#define B2063_G_RX_SP11 B43_LP_RADIO(0x02B) /* G RX SP 11 */ +#define B2063_A_RX_SP1 B43_LP_RADIO(0x02C) /* A RX SP 1 */ +#define B2063_A_RX_SP2 B43_LP_RADIO(0x02D) /* A RX SP 2 */ +#define B2063_A_RX_SP3 B43_LP_RADIO(0x02E) /* A RX SP 3 */ +#define B2063_A_RX_SP4 B43_LP_RADIO(0x02F) /* A RX SP 4 */ +#define B2063_A_RX_SP5 B43_LP_RADIO(0x030) /* A RX SP 5 */ +#define B2063_A_RX_SP6 B43_LP_RADIO(0x031) /* A RX SP 6 */ +#define B2063_A_RX_SP7 B43_LP_RADIO(0x032) /* A RX SP 7 */ +#define B2063_RX_BB_SP1 B43_LP_RADIO(0x033) /* RX BB SP 1 */ +#define B2063_RX_BB_SP2 B43_LP_RADIO(0x034) /* RX BB SP 2 */ +#define B2063_RX_BB_SP3 B43_LP_RADIO(0x035) /* RX BB SP 3 */ +#define B2063_RX_BB_SP4 B43_LP_RADIO(0x036) /* RX BB SP 4 */ +#define B2063_RX_BB_SP5 B43_LP_RADIO(0x037) /* RX BB SP 5 */ +#define B2063_RX_BB_SP6 B43_LP_RADIO(0x038) /* RX BB SP 6 */ +#define B2063_RX_BB_SP7 B43_LP_RADIO(0x039) /* RX BB SP 7 */ +#define B2063_RX_BB_SP8 B43_LP_RADIO(0x03A) /* RX BB SP 8 */ +#define B2063_TX_RF_SP1 B43_LP_RADIO(0x03B) /* TX RF SP 1 */ +#define B2063_TX_RF_SP2 B43_LP_RADIO(0x03C) /* TX RF SP 2 */ +#define B2063_TX_RF_SP3 B43_LP_RADIO(0x03D) /* TX RF SP 3 */ +#define B2063_TX_RF_SP4 B43_LP_RADIO(0x03E) /* TX RF SP 4 */ +#define B2063_TX_RF_SP5 B43_LP_RADIO(0x03F) /* TX RF SP 5 */ +#define B2063_TX_RF_SP6 B43_LP_RADIO(0x040) /* TX RF SP 6 */ +#define B2063_TX_RF_SP7 B43_LP_RADIO(0x041) /* TX RF SP 7 */ +#define B2063_TX_RF_SP8 B43_LP_RADIO(0x042) /* TX RF SP 8 */ +#define B2063_TX_RF_SP9 B43_LP_RADIO(0x043) /* TX RF SP 9 */ +#define B2063_TX_RF_SP10 B43_LP_RADIO(0x044) /* TX RF SP 10 */ +#define B2063_TX_RF_SP11 B43_LP_RADIO(0x045) /* TX RF SP 11 */ +#define B2063_TX_RF_SP12 B43_LP_RADIO(0x046) /* TX RF SP 12 */ +#define B2063_TX_RF_SP13 B43_LP_RADIO(0x047) /* TX RF SP 13 */ +#define B2063_TX_RF_SP14 B43_LP_RADIO(0x048) /* TX RF SP 14 */ +#define B2063_TX_RF_SP15 B43_LP_RADIO(0x049) /* TX RF SP 15 */ +#define B2063_TX_RF_SP16 B43_LP_RADIO(0x04A) /* TX RF SP 16 */ +#define B2063_TX_RF_SP17 B43_LP_RADIO(0x04B) /* TX RF SP 17 */ +#define B2063_PA_SP1 B43_LP_RADIO(0x04C) /* PA SP 1 */ +#define B2063_PA_SP2 B43_LP_RADIO(0x04D) /* PA SP 2 */ +#define B2063_PA_SP3 B43_LP_RADIO(0x04E) /* PA SP 3 */ +#define B2063_PA_SP4 B43_LP_RADIO(0x04F) /* PA SP 4 */ +#define B2063_PA_SP5 B43_LP_RADIO(0x050) /* PA SP 5 */ +#define B2063_PA_SP6 B43_LP_RADIO(0x051) /* PA SP 6 */ +#define B2063_PA_SP7 B43_LP_RADIO(0x052) /* PA SP 7 */ +#define B2063_TX_BB_SP1 B43_LP_RADIO(0x053) /* TX BB SP 1 */ +#define B2063_TX_BB_SP2 B43_LP_RADIO(0x054) /* TX BB SP 2 */ +#define B2063_TX_BB_SP3 B43_LP_RADIO(0x055) /* TX BB SP 3 */ +#define B2063_REG_SP1 B43_LP_RADIO(0x056) /* REG SP 1 */ +#define B2063_BANDGAP_CTL1 B43_LP_RADIO(0x057) /* BANDGAP Control 1 */ +#define B2063_BANDGAP_CTL2 B43_LP_RADIO(0x058) /* BANDGAP Control 2 */ +#define B2063_LPO_CTL1 B43_LP_RADIO(0x059) /* LPO Control 1 */ +#define B2063_RC_CALIB_CTL1 B43_LP_RADIO(0x05A) /* RC Calibration Control 1 */ +#define B2063_RC_CALIB_CTL2 B43_LP_RADIO(0x05B) /* RC Calibration Control 2 */ +#define B2063_RC_CALIB_CTL3 B43_LP_RADIO(0x05C) /* RC Calibration Control 3 */ +#define B2063_RC_CALIB_CTL4 B43_LP_RADIO(0x05D) /* RC Calibration Control 4 */ +#define B2063_RC_CALIB_CTL5 B43_LP_RADIO(0x05E) /* RC Calibration Control 5 */ +#define B2063_RC_CALIB_CTL6 B43_LP_RADIO(0x05F) /* RC Calibration Control 6 */ +#define B2063_RC_CALIB_CTL7 B43_LP_RADIO(0x060) /* RC Calibration Control 7 */ +#define B2063_RC_CALIB_CTL8 B43_LP_RADIO(0x061) /* RC Calibration Control 8 */ +#define B2063_RC_CALIB_CTL9 B43_LP_RADIO(0x062) /* RC Calibration Control 9 */ +#define B2063_RC_CALIB_CTL10 B43_LP_RADIO(0x063) /* RC Calibration Control 10 */ +#define B2063_PLL_JTAG_CALNRST B43_LP_RADIO(0x064) /* PLL JTAG CALNRST */ +#define B2063_PLL_JTAG_IN_PLL1 B43_LP_RADIO(0x065) /* PLL JTAG IN PLL 1 */ +#define B2063_PLL_JTAG_IN_PLL2 B43_LP_RADIO(0x066) /* PLL JTAG IN PLL 2 */ +#define B2063_PLL_JTAG_PLL_CP1 B43_LP_RADIO(0x067) /* PLL JTAG PLL CP 1 */ +#define B2063_PLL_JTAG_PLL_CP2 B43_LP_RADIO(0x068) /* PLL JTAG PLL CP 2 */ +#define B2063_PLL_JTAG_PLL_CP3 B43_LP_RADIO(0x069) /* PLL JTAG PLL CP 3 */ +#define B2063_PLL_JTAG_PLL_CP4 B43_LP_RADIO(0x06A) /* PLL JTAG PLL CP 4 */ +#define B2063_PLL_JTAG_PLL_CTL1 B43_LP_RADIO(0x06B) /* PLL JTAG PLL Control 1 */ +#define B2063_PLL_JTAG_PLL_LF1 B43_LP_RADIO(0x06C) /* PLL JTAG PLL LF 1 */ +#define B2063_PLL_JTAG_PLL_LF2 B43_LP_RADIO(0x06D) /* PLL JTAG PLL LF 2 */ +#define B2063_PLL_JTAG_PLL_LF3 B43_LP_RADIO(0x06E) /* PLL JTAG PLL LF 3 */ +#define B2063_PLL_JTAG_PLL_LF4 B43_LP_RADIO(0x06F) /* PLL JTAG PLL LF 4 */ +#define B2063_PLL_JTAG_PLL_SG1 B43_LP_RADIO(0x070) /* PLL JTAG PLL SG 1 */ +#define B2063_PLL_JTAG_PLL_SG2 B43_LP_RADIO(0x071) /* PLL JTAG PLL SG 2 */ +#define B2063_PLL_JTAG_PLL_SG3 B43_LP_RADIO(0x072) /* PLL JTAG PLL SG 3 */ +#define B2063_PLL_JTAG_PLL_SG4 B43_LP_RADIO(0x073) /* PLL JTAG PLL SG 4 */ +#define B2063_PLL_JTAG_PLL_SG5 B43_LP_RADIO(0x074) /* PLL JTAG PLL SG 5 */ +#define B2063_PLL_JTAG_PLL_VCO1 B43_LP_RADIO(0x075) /* PLL JTAG PLL VCO 1 */ +#define B2063_PLL_JTAG_PLL_VCO2 B43_LP_RADIO(0x076) /* PLL JTAG PLL VCO 2 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB1 B43_LP_RADIO(0x077) /* PLL JTAG PLL VCO Calibration 1 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB2 B43_LP_RADIO(0x078) /* PLL JTAG PLL VCO Calibration 2 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB3 B43_LP_RADIO(0x079) /* PLL JTAG PLL VCO Calibration 3 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB4 B43_LP_RADIO(0x07A) /* PLL JTAG PLL VCO Calibration 4 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB5 B43_LP_RADIO(0x07B) /* PLL JTAG PLL VCO Calibration 5 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB6 B43_LP_RADIO(0x07C) /* PLL JTAG PLL VCO Calibration 6 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB7 B43_LP_RADIO(0x07D) /* PLL JTAG PLL VCO Calibration 7 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB8 B43_LP_RADIO(0x07E) /* PLL JTAG PLL VCO Calibration 8 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB9 B43_LP_RADIO(0x07F) /* PLL JTAG PLL VCO Calibration 9 */ +#define B2063_PLL_JTAG_PLL_VCO_CALIB10 B43_LP_RADIO(0x080) /* PLL JTAG PLL VCO Calibration 10 */ +#define B2063_PLL_JTAG_PLL_XTAL_12 B43_LP_RADIO(0x081) /* PLL JTAG PLL XTAL 1 2 */ +#define B2063_PLL_JTAG_PLL_XTAL3 B43_LP_RADIO(0x082) /* PLL JTAG PLL XTAL 3 */ +#define B2063_LOGEN_ACL1 B43_LP_RADIO(0x083) /* LOGEN ACL 1 */ +#define B2063_LOGEN_ACL2 B43_LP_RADIO(0x084) /* LOGEN ACL 2 */ +#define B2063_LOGEN_ACL3 B43_LP_RADIO(0x085) /* LOGEN ACL 3 */ +#define B2063_LOGEN_ACL4 B43_LP_RADIO(0x086) /* LOGEN ACL 4 */ +#define B2063_LOGEN_ACL5 B43_LP_RADIO(0x087) /* LOGEN ACL 5 */ +#define B2063_LO_CALIB_INPUTS B43_LP_RADIO(0x088) /* LO Calibration INPUTS */ +#define B2063_LO_CALIB_CTL1 B43_LP_RADIO(0x089) /* LO Calibration Control 1 */ +#define B2063_LO_CALIB_CTL2 B43_LP_RADIO(0x08A) /* LO Calibration Control 2 */ +#define B2063_LO_CALIB_CTL3 B43_LP_RADIO(0x08B) /* LO Calibration Control 3 */ +#define B2063_LO_CALIB_WAITCNT B43_LP_RADIO(0x08C) /* LO Calibration WAITCNT */ +#define B2063_LO_CALIB_OVR1 B43_LP_RADIO(0x08D) /* LO Calibration OVR 1 */ +#define B2063_LO_CALIB_OVR2 B43_LP_RADIO(0x08E) /* LO Calibration OVR 2 */ +#define B2063_LO_CALIB_OVAL1 B43_LP_RADIO(0x08F) /* LO Calibration OVAL 1 */ +#define B2063_LO_CALIB_OVAL2 B43_LP_RADIO(0x090) /* LO Calibration OVAL 2 */ +#define B2063_LO_CALIB_OVAL3 B43_LP_RADIO(0x091) /* LO Calibration OVAL 3 */ +#define B2063_LO_CALIB_OVAL4 B43_LP_RADIO(0x092) /* LO Calibration OVAL 4 */ +#define B2063_LO_CALIB_OVAL5 B43_LP_RADIO(0x093) /* LO Calibration OVAL 5 */ +#define B2063_LO_CALIB_OVAL6 B43_LP_RADIO(0x094) /* LO Calibration OVAL 6 */ +#define B2063_LO_CALIB_OVAL7 B43_LP_RADIO(0x095) /* LO Calibration OVAL 7 */ +#define B2063_LO_CALIB_CALVLD1 B43_LP_RADIO(0x096) /* LO Calibration CALVLD 1 */ +#define B2063_LO_CALIB_CALVLD2 B43_LP_RADIO(0x097) /* LO Calibration CALVLD 2 */ +#define B2063_LO_CALIB_CVAL1 B43_LP_RADIO(0x098) /* LO Calibration CVAL 1 */ +#define B2063_LO_CALIB_CVAL2 B43_LP_RADIO(0x099) /* LO Calibration CVAL 2 */ +#define B2063_LO_CALIB_CVAL3 B43_LP_RADIO(0x09A) /* LO Calibration CVAL 3 */ +#define B2063_LO_CALIB_CVAL4 B43_LP_RADIO(0x09B) /* LO Calibration CVAL 4 */ +#define B2063_LO_CALIB_CVAL5 B43_LP_RADIO(0x09C) /* LO Calibration CVAL 5 */ +#define B2063_LO_CALIB_CVAL6 B43_LP_RADIO(0x09D) /* LO Calibration CVAL 6 */ +#define B2063_LO_CALIB_CVAL7 B43_LP_RADIO(0x09E) /* LO Calibration CVAL 7 */ +#define B2063_LOGEN_CALIB_EN B43_LP_RADIO(0x09F) /* LOGEN Calibration EN */ +#define B2063_LOGEN_PEAKDET1 B43_LP_RADIO(0x0A0) /* LOGEN PEAKDET 1 */ +#define B2063_LOGEN_RCCR1 B43_LP_RADIO(0x0A1) /* LOGEN RCCR 1 */ +#define B2063_LOGEN_VCOBUF1 B43_LP_RADIO(0x0A2) /* LOGEN VCOBUF 1 */ +#define B2063_LOGEN_MIXER1 B43_LP_RADIO(0x0A3) /* LOGEN MIXER 1 */ +#define B2063_LOGEN_MIXER2 B43_LP_RADIO(0x0A4) /* LOGEN MIXER 2 */ +#define B2063_LOGEN_BUF1 B43_LP_RADIO(0x0A5) /* LOGEN BUF 1 */ +#define B2063_LOGEN_BUF2 B43_LP_RADIO(0x0A6) /* LOGEN BUF 2 */ +#define B2063_LOGEN_DIV1 B43_LP_RADIO(0x0A7) /* LOGEN DIV 1 */ +#define B2063_LOGEN_DIV2 B43_LP_RADIO(0x0A8) /* LOGEN DIV 2 */ +#define B2063_LOGEN_DIV3 B43_LP_RADIO(0x0A9) /* LOGEN DIV 3 */ +#define B2063_LOGEN_CBUFRX1 B43_LP_RADIO(0x0AA) /* LOGEN CBUFRX 1 */ +#define B2063_LOGEN_CBUFRX2 B43_LP_RADIO(0x0AB) /* LOGEN CBUFRX 2 */ +#define B2063_LOGEN_CBUFTX1 B43_LP_RADIO(0x0AC) /* LOGEN CBUFTX 1 */ +#define B2063_LOGEN_CBUFTX2 B43_LP_RADIO(0x0AD) /* LOGEN CBUFTX 2 */ +#define B2063_LOGEN_IDAC1 B43_LP_RADIO(0x0AE) /* LOGEN IDAC 1 */ +#define B2063_LOGEN_SPARE1 B43_LP_RADIO(0x0AF) /* LOGEN SPARE 1 */ +#define B2063_LOGEN_SPARE2 B43_LP_RADIO(0x0B0) /* LOGEN SPARE 2 */ +#define B2063_LOGEN_SPARE3 B43_LP_RADIO(0x0B1) /* LOGEN SPARE 3 */ +#define B2063_G_RX_1ST1 B43_LP_RADIO(0x0B2) /* G RX 1ST 1 */ +#define B2063_G_RX_1ST2 B43_LP_RADIO(0x0B3) /* G RX 1ST 2 */ +#define B2063_G_RX_1ST3 B43_LP_RADIO(0x0B4) /* G RX 1ST 3 */ +#define B2063_G_RX_2ND1 B43_LP_RADIO(0x0B5) /* G RX 2ND 1 */ +#define B2063_G_RX_2ND2 B43_LP_RADIO(0x0B6) /* G RX 2ND 2 */ +#define B2063_G_RX_2ND3 B43_LP_RADIO(0x0B7) /* G RX 2ND 3 */ +#define B2063_G_RX_2ND4 B43_LP_RADIO(0x0B8) /* G RX 2ND 4 */ +#define B2063_G_RX_2ND5 B43_LP_RADIO(0x0B9) /* G RX 2ND 5 */ +#define B2063_G_RX_2ND6 B43_LP_RADIO(0x0BA) /* G RX 2ND 6 */ +#define B2063_G_RX_2ND7 B43_LP_RADIO(0x0BB) /* G RX 2ND 7 */ +#define B2063_G_RX_2ND8 B43_LP_RADIO(0x0BC) /* G RX 2ND 8 */ +#define B2063_G_RX_PS1 B43_LP_RADIO(0x0BD) /* G RX PS 1 */ +#define B2063_G_RX_PS2 B43_LP_RADIO(0x0BE) /* G RX PS 2 */ +#define B2063_G_RX_PS3 B43_LP_RADIO(0x0BF) /* G RX PS 3 */ +#define B2063_G_RX_PS4 B43_LP_RADIO(0x0C0) /* G RX PS 4 */ +#define B2063_G_RX_PS5 B43_LP_RADIO(0x0C1) /* G RX PS 5 */ +#define B2063_G_RX_MIX1 B43_LP_RADIO(0x0C2) /* G RX MIX 1 */ +#define B2063_G_RX_MIX2 B43_LP_RADIO(0x0C3) /* G RX MIX 2 */ +#define B2063_G_RX_MIX3 B43_LP_RADIO(0x0C4) /* G RX MIX 3 */ +#define B2063_G_RX_MIX4 B43_LP_RADIO(0x0C5) /* G RX MIX 4 */ +#define B2063_G_RX_MIX5 B43_LP_RADIO(0x0C6) /* G RX MIX 5 */ +#define B2063_G_RX_MIX6 B43_LP_RADIO(0x0C7) /* G RX MIX 6 */ +#define B2063_G_RX_MIX7 B43_LP_RADIO(0x0C8) /* G RX MIX 7 */ +#define B2063_G_RX_MIX8 B43_LP_RADIO(0x0C9) /* G RX MIX 8 */ +#define B2063_G_RX_PDET1 B43_LP_RADIO(0x0CA) /* G RX PDET 1 */ +#define B2063_G_RX_SPARES1 B43_LP_RADIO(0x0CB) /* G RX SPARES 1 */ +#define B2063_G_RX_SPARES2 B43_LP_RADIO(0x0CC) /* G RX SPARES 2 */ +#define B2063_G_RX_SPARES3 B43_LP_RADIO(0x0CD) /* G RX SPARES 3 */ +#define B2063_A_RX_1ST1 B43_LP_RADIO(0x0CE) /* A RX 1ST 1 */ +#define B2063_A_RX_1ST2 B43_LP_RADIO(0x0CF) /* A RX 1ST 2 */ +#define B2063_A_RX_1ST3 B43_LP_RADIO(0x0D0) /* A RX 1ST 3 */ +#define B2063_A_RX_1ST4 B43_LP_RADIO(0x0D1) /* A RX 1ST 4 */ +#define B2063_A_RX_1ST5 B43_LP_RADIO(0x0D2) /* A RX 1ST 5 */ +#define B2063_A_RX_2ND1 B43_LP_RADIO(0x0D3) /* A RX 2ND 1 */ +#define B2063_A_RX_2ND2 B43_LP_RADIO(0x0D4) /* A RX 2ND 2 */ +#define B2063_A_RX_2ND3 B43_LP_RADIO(0x0D5) /* A RX 2ND 3 */ +#define B2063_A_RX_2ND4 B43_LP_RADIO(0x0D6) /* A RX 2ND 4 */ +#define B2063_A_RX_2ND5 B43_LP_RADIO(0x0D7) /* A RX 2ND 5 */ +#define B2063_A_RX_2ND6 B43_LP_RADIO(0x0D8) /* A RX 2ND 6 */ +#define B2063_A_RX_2ND7 B43_LP_RADIO(0x0D9) /* A RX 2ND 7 */ +#define B2063_A_RX_PS1 B43_LP_RADIO(0x0DA) /* A RX PS 1 */ +#define B2063_A_RX_PS2 B43_LP_RADIO(0x0DB) /* A RX PS 2 */ +#define B2063_A_RX_PS3 B43_LP_RADIO(0x0DC) /* A RX PS 3 */ +#define B2063_A_RX_PS4 B43_LP_RADIO(0x0DD) /* A RX PS 4 */ +#define B2063_A_RX_PS5 B43_LP_RADIO(0x0DE) /* A RX PS 5 */ +#define B2063_A_RX_PS6 B43_LP_RADIO(0x0DF) /* A RX PS 6 */ +#define B2063_A_RX_MIX1 B43_LP_RADIO(0x0E0) /* A RX MIX 1 */ +#define B2063_A_RX_MIX2 B43_LP_RADIO(0x0E1) /* A RX MIX 2 */ +#define B2063_A_RX_MIX3 B43_LP_RADIO(0x0E2) /* A RX MIX 3 */ +#define B2063_A_RX_MIX4 B43_LP_RADIO(0x0E3) /* A RX MIX 4 */ +#define B2063_A_RX_MIX5 B43_LP_RADIO(0x0E4) /* A RX MIX 5 */ +#define B2063_A_RX_MIX6 B43_LP_RADIO(0x0E5) /* A RX MIX 6 */ +#define B2063_A_RX_MIX7 B43_LP_RADIO(0x0E6) /* A RX MIX 7 */ +#define B2063_A_RX_MIX8 B43_LP_RADIO(0x0E7) /* A RX MIX 8 */ +#define B2063_A_RX_PWRDET1 B43_LP_RADIO(0x0E8) /* A RX PWRDET 1 */ +#define B2063_A_RX_SPARE1 B43_LP_RADIO(0x0E9) /* A RX SPARE 1 */ +#define B2063_A_RX_SPARE2 B43_LP_RADIO(0x0EA) /* A RX SPARE 2 */ +#define B2063_A_RX_SPARE3 B43_LP_RADIO(0x0EB) /* A RX SPARE 3 */ +#define B2063_RX_TIA_CTL1 B43_LP_RADIO(0x0EC) /* RX TIA Control 1 */ +#define B2063_RX_TIA_CTL2 B43_LP_RADIO(0x0ED) /* RX TIA Control 2 */ +#define B2063_RX_TIA_CTL3 B43_LP_RADIO(0x0EE) /* RX TIA Control 3 */ +#define B2063_RX_TIA_CTL4 B43_LP_RADIO(0x0EF) /* RX TIA Control 4 */ +#define B2063_RX_TIA_CTL5 B43_LP_RADIO(0x0F0) /* RX TIA Control 5 */ +#define B2063_RX_TIA_CTL6 B43_LP_RADIO(0x0F1) /* RX TIA Control 6 */ +#define B2063_RX_BB_CTL1 B43_LP_RADIO(0x0F2) /* RX BB Control 1 */ +#define B2063_RX_BB_CTL2 B43_LP_RADIO(0x0F3) /* RX BB Control 2 */ +#define B2063_RX_BB_CTL3 B43_LP_RADIO(0x0F4) /* RX BB Control 3 */ +#define B2063_RX_BB_CTL4 B43_LP_RADIO(0x0F5) /* RX BB Control 4 */ +#define B2063_RX_BB_CTL5 B43_LP_RADIO(0x0F6) /* RX BB Control 5 */ +#define B2063_RX_BB_CTL6 B43_LP_RADIO(0x0F7) /* RX BB Control 6 */ +#define B2063_RX_BB_CTL7 B43_LP_RADIO(0x0F8) /* RX BB Control 7 */ +#define B2063_RX_BB_CTL8 B43_LP_RADIO(0x0F9) /* RX BB Control 8 */ +#define B2063_RX_BB_CTL9 B43_LP_RADIO(0x0FA) /* RX BB Control 9 */ +#define B2063_TX_RF_CTL1 B43_LP_RADIO(0x0FB) /* TX RF Control 1 */ +#define B2063_TX_RF_IDAC_LO_RF_I B43_LP_RADIO(0x0FC) /* TX RF IDAC LO RF I */ +#define B2063_TX_RF_IDAC_LO_RF_Q B43_LP_RADIO(0x0FD) /* TX RF IDAC LO RF Q */ +#define B2063_TX_RF_IDAC_LO_BB_I B43_LP_RADIO(0x0FE) /* TX RF IDAC LO BB I */ +#define B2063_TX_RF_IDAC_LO_BB_Q B43_LP_RADIO(0x0FF) /* TX RF IDAC LO BB Q */ +#define B2063_TX_RF_CTL2 B43_LP_RADIO(0x100) /* TX RF Control 2 */ +#define B2063_TX_RF_CTL3 B43_LP_RADIO(0x101) /* TX RF Control 3 */ +#define B2063_TX_RF_CTL4 B43_LP_RADIO(0x102) /* TX RF Control 4 */ +#define B2063_TX_RF_CTL5 B43_LP_RADIO(0x103) /* TX RF Control 5 */ +#define B2063_TX_RF_CTL6 B43_LP_RADIO(0x104) /* TX RF Control 6 */ +#define B2063_TX_RF_CTL7 B43_LP_RADIO(0x105) /* TX RF Control 7 */ +#define B2063_TX_RF_CTL8 B43_LP_RADIO(0x106) /* TX RF Control 8 */ +#define B2063_TX_RF_CTL9 B43_LP_RADIO(0x107) /* TX RF Control 9 */ +#define B2063_TX_RF_CTL10 B43_LP_RADIO(0x108) /* TX RF Control 10 */ +#define B2063_TX_RF_CTL14 B43_LP_RADIO(0x109) /* TX RF Control 14 */ +#define B2063_TX_RF_CTL15 B43_LP_RADIO(0x10A) /* TX RF Control 15 */ +#define B2063_PA_CTL1 B43_LP_RADIO(0x10B) /* PA Control 1 */ +#define B2063_PA_CTL2 B43_LP_RADIO(0x10C) /* PA Control 2 */ +#define B2063_PA_CTL3 B43_LP_RADIO(0x10D) /* PA Control 3 */ +#define B2063_PA_CTL4 B43_LP_RADIO(0x10E) /* PA Control 4 */ +#define B2063_PA_CTL5 B43_LP_RADIO(0x10F) /* PA Control 5 */ +#define B2063_PA_CTL6 B43_LP_RADIO(0x110) /* PA Control 6 */ +#define B2063_PA_CTL7 B43_LP_RADIO(0x111) /* PA Control 7 */ +#define B2063_PA_CTL8 B43_LP_RADIO(0x112) /* PA Control 8 */ +#define B2063_PA_CTL9 B43_LP_RADIO(0x113) /* PA Control 9 */ +#define B2063_PA_CTL10 B43_LP_RADIO(0x114) /* PA Control 10 */ +#define B2063_PA_CTL11 B43_LP_RADIO(0x115) /* PA Control 11 */ +#define B2063_PA_CTL12 B43_LP_RADIO(0x116) /* PA Control 12 */ +#define B2063_PA_CTL13 B43_LP_RADIO(0x117) /* PA Control 13 */ +#define B2063_TX_BB_CTL1 B43_LP_RADIO(0x118) /* TX BB Control 1 */ +#define B2063_TX_BB_CTL2 B43_LP_RADIO(0x119) /* TX BB Control 2 */ +#define B2063_TX_BB_CTL3 B43_LP_RADIO(0x11A) /* TX BB Control 3 */ +#define B2063_TX_BB_CTL4 B43_LP_RADIO(0x11B) /* TX BB Control 4 */ +#define B2063_GPIO_CTL1 B43_LP_RADIO(0x11C) /* GPIO Control 1 */ +#define B2063_VREG_CTL1 B43_LP_RADIO(0x11D) /* VREG Control 1 */ +#define B2063_AMUX_CTL1 B43_LP_RADIO(0x11E) /* AMUX Control 1 */ +#define B2063_IQ_CALIB_GVAR B43_LP_RADIO(0x11F) /* IQ Calibration GVAR */ +#define B2063_IQ_CALIB_CTL1 B43_LP_RADIO(0x120) /* IQ Calibration Control 1 */ +#define B2063_IQ_CALIB_CTL2 B43_LP_RADIO(0x121) /* IQ Calibration Control 2 */ +#define B2063_TEMPSENSE_CTL1 B43_LP_RADIO(0x122) /* TEMPSENSE Control 1 */ +#define B2063_TEMPSENSE_CTL2 B43_LP_RADIO(0x123) /* TEMPSENSE Control 2 */ +#define B2063_TX_RX_LOOPBACK1 B43_LP_RADIO(0x124) /* TX/RX LOOPBACK 1 */ +#define B2063_TX_RX_LOOPBACK2 B43_LP_RADIO(0x125) /* TX/RX LOOPBACK 2 */ +#define B2063_EXT_TSSI_CTL1 B43_LP_RADIO(0x126) /* EXT TSSI Control 1 */ +#define B2063_EXT_TSSI_CTL2 B43_LP_RADIO(0x127) /* EXT TSSI Control 2 */ +#define B2063_AFE_CTL B43_LP_RADIO(0x128) /* AFE Control */ + + + +struct b43_phy_lp { + //TODO +}; + + +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_lp; + +#endif /* LINUX_B43_PHY_LP_H_ */ diff --git a/drivers/net/wireless/b43/nphy.c b/drivers/net/wireless/b43/phy_n.c index 644eed993bea..8bcfda5f3f07 100644 --- a/drivers/net/wireless/b43/nphy.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -26,7 +26,7 @@ #include <linux/types.h> #include "b43.h" -#include "nphy.h" +#include "phy_n.h" #include "tables_nphy.h" @@ -34,10 +34,16 @@ void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) {//TODO } -void b43_nphy_xmitpower(struct b43_wldev *dev) +static void b43_nphy_op_adjust_txpower(struct b43_wldev *dev) {//TODO } +static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev, + bool ignore_tssi) +{//TODO + return B43_TXPWR_RES_DONE; +} + static void b43_chantab_radio_upload(struct b43_wldev *dev, const struct b43_nphy_channeltab_entry *e) { @@ -81,9 +87,8 @@ static void b43_nphy_tx_power_fix(struct b43_wldev *dev) //TODO } -/* Tune the hardware to a new channel. Don't call this directly. - * Use b43_radio_selectchannel() */ -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel) +/* Tune the hardware to a new channel. */ +static int nphy_channel_switch(struct b43_wldev *dev, unsigned int channel) { const struct b43_nphy_channeltab_entry *tabent; @@ -162,7 +167,7 @@ static void b43_radio_init2055_post(struct b43_wldev *dev) msleep(1); b43_radio_mask(dev, B2055_CAL_LPOCTL, 0xFF7F); msleep(1); - b43_radio_selectchannel(dev, dev->phy.channel, 0); + nphy_channel_switch(dev, dev->phy.channel); b43_radio_write16(dev, B2055_C1_RX_BB_LPF, 0x9); b43_radio_write16(dev, B2055_C2_RX_BB_LPF, 0x9); b43_radio_write16(dev, B2055_C1_RX_BB_MIDACHP, 0x83); @@ -484,3 +489,140 @@ int b43_phy_initn(struct b43_wldev *dev) b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n"); return 0; } + +static int b43_nphy_op_allocate(struct b43_wldev *dev) +{ + struct b43_phy_n *nphy; + + nphy = kzalloc(sizeof(*nphy), GFP_KERNEL); + if (!nphy) + return -ENOMEM; + dev->phy.n = nphy; + + return 0; +} + +static void b43_nphy_op_prepare_structs(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + + memset(nphy, 0, sizeof(*nphy)); + + //TODO init struct b43_phy_n +} + +static void b43_nphy_op_free(struct b43_wldev *dev) +{ + struct b43_phy *phy = &dev->phy; + struct b43_phy_n *nphy = phy->n; + + kfree(nphy); + phy->n = NULL; +} + +static int b43_nphy_op_init(struct b43_wldev *dev) +{ + return b43_phy_initn(dev); +} + +static inline void check_phyreg(struct b43_wldev *dev, u16 offset) +{ +#if B43_DEBUG + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_OFDM_GPHY) { + /* OFDM registers are onnly available on A/G-PHYs */ + b43err(dev->wl, "Invalid OFDM PHY access at " + "0x%04X on N-PHY\n", offset); + dump_stack(); + } + if ((offset & B43_PHYROUTE) == B43_PHYROUTE_EXT_GPHY) { + /* Ext-G registers are only available on G-PHYs */ + b43err(dev->wl, "Invalid EXT-G PHY access at " + "0x%04X on N-PHY\n", offset); + dump_stack(); + } +#endif /* B43_DEBUG */ +} + +static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg) +{ + check_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + return b43_read16(dev, B43_MMIO_PHY_DATA); +} + +static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + check_phyreg(dev, reg); + b43_write16(dev, B43_MMIO_PHY_CONTROL, reg); + b43_write16(dev, B43_MMIO_PHY_DATA, value); +} + +static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + /* N-PHY needs 0x100 for read access */ + reg |= 0x100; + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW); +} + +static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value) +{ + /* Register 1 is a 32-bit register. */ + B43_WARN_ON(reg == 1); + + b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg); + b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value); +} + +static void b43_nphy_op_software_rfkill(struct b43_wldev *dev, + enum rfkill_state state) +{//TODO +} + +static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on) +{ + b43_phy_write(dev, B43_NPHY_AFECTL_OVER, + on ? 0 : 0x7FFF); +} + +static int b43_nphy_op_switch_channel(struct b43_wldev *dev, + unsigned int new_channel) +{ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + if ((new_channel < 1) || (new_channel > 14)) + return -EINVAL; + } else { + if (new_channel > 200) + return -EINVAL; + } + + return nphy_channel_switch(dev, new_channel); +} + +static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev) +{ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + return 1; + return 36; +} + +const struct b43_phy_operations b43_phyops_n = { + .allocate = b43_nphy_op_allocate, + .free = b43_nphy_op_free, + .prepare_structs = b43_nphy_op_prepare_structs, + .init = b43_nphy_op_init, + .phy_read = b43_nphy_op_read, + .phy_write = b43_nphy_op_write, + .radio_read = b43_nphy_op_radio_read, + .radio_write = b43_nphy_op_radio_write, + .software_rfkill = b43_nphy_op_software_rfkill, + .switch_analog = b43_nphy_op_switch_analog, + .switch_channel = b43_nphy_op_switch_channel, + .get_default_chan = b43_nphy_op_get_default_chan, + .recalc_txpower = b43_nphy_op_recalc_txpower, + .adjust_txpower = b43_nphy_op_adjust_txpower, +}; diff --git a/drivers/net/wireless/b43/nphy.h b/drivers/net/wireless/b43/phy_n.h index faf46b9cbf1b..1749aef4147d 100644 --- a/drivers/net/wireless/b43/nphy.h +++ b/drivers/net/wireless/b43/phy_n.h @@ -1,7 +1,7 @@ #ifndef B43_NPHY_H_ #define B43_NPHY_H_ -#include "phy.h" +#include "phy_common.h" /* N-PHY registers. */ @@ -919,54 +919,12 @@ struct b43_wldev; +struct b43_phy_n { + //TODO lots of missing stuff +}; -#ifdef CONFIG_B43_NPHY -/* N-PHY support enabled */ -int b43_phy_initn(struct b43_wldev *dev); +struct b43_phy_operations; +extern const struct b43_phy_operations b43_phyops_n; -void b43_nphy_radio_turn_on(struct b43_wldev *dev); -void b43_nphy_radio_turn_off(struct b43_wldev *dev); - -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel); - -void b43_nphy_xmitpower(struct b43_wldev *dev); -void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna); - - -#else /* CONFIG_B43_NPHY */ -/* N-PHY support disabled */ - - -static inline -int b43_phy_initn(struct b43_wldev *dev) -{ - return -EOPNOTSUPP; -} - -static inline -void b43_nphy_radio_turn_on(struct b43_wldev *dev) -{ -} -static inline -void b43_nphy_radio_turn_off(struct b43_wldev *dev) -{ -} - -static inline -int b43_nphy_selectchannel(struct b43_wldev *dev, u8 channel) -{ - return -ENOSYS; -} - -static inline -void b43_nphy_xmitpower(struct b43_wldev *dev) -{ -} -static inline -void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna) -{ -} - -#endif /* CONFIG_B43_NPHY */ #endif /* B43_NPHY_H_ */ diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index fec5645944a4..713753781f40 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -24,6 +24,7 @@ #include "rfkill.h" #include "b43.h" +#include "phy_common.h" #include <linux/kmod.h> @@ -43,23 +44,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43_rfkill_update_state(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -77,7 +61,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43_rfkill_update_state(dev); b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } @@ -114,11 +97,11 @@ static int b43_rfkill_soft_toggle(void *data, enum rfkill_state state) goto out_unlock; } if (!dev->phy.radio_on) - b43_radio_turn_on(dev); + b43_software_rfkill(dev, state); break; case RFKILL_STATE_SOFT_BLOCKED: if (dev->phy.radio_on) - b43_radio_turn_off(dev, 0); + b43_software_rfkill(dev, state); break; default: b43warn(wl, "Received unexpected rfkill state %d.\n", state); @@ -187,6 +170,11 @@ void b43_rfkill_init(struct b43_wldev *dev) "The built-in radio LED will not work.\n"); #endif /* CONFIG_RFKILL_INPUT */ +#if !defined(CONFIG_RFKILL_INPUT) && !defined(CONFIG_RFKILL_INPUT_MODULE) + b43warn(wl, "The rfkill-input subsystem is not available. " + "The built-in radio LED will not work.\n"); +#endif + err = input_register_polled_device(rfk->poll_dev); if (err) goto err_unreg_rfk; diff --git a/drivers/net/wireless/b43/sysfs.c b/drivers/net/wireless/b43/sysfs.c index 275095b8cbe7..5adaa3692d75 100644 --- a/drivers/net/wireless/b43/sysfs.c +++ b/drivers/net/wireless/b43/sysfs.c @@ -29,7 +29,7 @@ #include "b43.h" #include "sysfs.h" #include "main.h" -#include "phy.h" +#include "phy_common.h" #define GENERIC_FILESIZE 64 @@ -59,7 +59,12 @@ static ssize_t b43_attr_interfmode_show(struct device *dev, mutex_lock(&wldev->wl->mutex); - switch (wldev->phy.interfmode) { + if (wldev->phy.type != B43_PHYTYPE_G) { + mutex_unlock(&wldev->wl->mutex); + return -ENOSYS; + } + + switch (wldev->phy.g->interfmode) { case B43_INTERFMODE_NONE: count = snprintf(buf, PAGE_SIZE, @@ -117,11 +122,15 @@ static ssize_t b43_attr_interfmode_store(struct device *dev, mutex_lock(&wldev->wl->mutex); spin_lock_irqsave(&wldev->wl->irq_lock, flags); - err = b43_radio_set_interference_mitigation(wldev, mode); - if (err) { - b43err(wldev->wl, "Interference Mitigation not " - "supported by device\n"); - } + if (wldev->phy.ops->interf_mitigation) { + err = wldev->phy.ops->interf_mitigation(wldev, mode); + if (err) { + b43err(wldev->wl, "Interference Mitigation not " + "supported by device\n"); + } + } else + err = -ENOSYS; + mmiowb(); spin_unlock_irqrestore(&wldev->wl->irq_lock, flags); mutex_unlock(&wldev->wl->mutex); diff --git a/drivers/net/wireless/b43/tables.c b/drivers/net/wireless/b43/tables.c index 3f5ea06bf13c..1ef9a6463ec6 100644 --- a/drivers/net/wireless/b43/tables.c +++ b/drivers/net/wireless/b43/tables.c @@ -27,7 +27,8 @@ #include "b43.h" #include "tables.h" -#include "phy.h" +#include "phy_g.h" + const u32 b43_tab_rotor[] = { 0xFEB93FFD, 0xFEC63FFD, /* 0 */ @@ -377,17 +378,17 @@ static inline void assert_sizes(void) u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; return b43_phy_read(dev, B43_PHY_OTABLEI); @@ -398,34 +399,34 @@ u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset) void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, u16 offset, u16 value) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; b43_phy_write(dev, B43_PHY_OTABLEI, value); } u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u32 ret; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_READ) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_READ; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; ret = b43_phy_read(dev, B43_PHY_OTABLEQ); ret <<= 16; ret |= b43_phy_read(dev, B43_PHY_OTABLEI); @@ -436,17 +437,17 @@ u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset) void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, u16 offset, u32 value) { - struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = dev->phy.g; u16 addr; addr = table + offset; - if ((phy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || - (addr - 1 != phy->ofdmtab_addr)) { + if ((gphy->ofdmtab_addr_direction != B43_OFDMTAB_DIRECTION_WRITE) || + (addr - 1 != gphy->ofdmtab_addr)) { /* The hardware has a different address in memory. Update it. */ b43_phy_write(dev, B43_PHY_OTABLECTL, addr); - phy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; + gphy->ofdmtab_addr_direction = B43_OFDMTAB_DIRECTION_WRITE; } - phy->ofdmtab_addr = addr; + gphy->ofdmtab_addr = addr; b43_phy_write(dev, B43_PHY_OTABLEI, value); b43_phy_write(dev, B43_PHY_OTABLEQ, (value >> 16)); diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c index 2aa57551786a..4e2336315545 100644 --- a/drivers/net/wireless/b43/tables_nphy.c +++ b/drivers/net/wireless/b43/tables_nphy.c @@ -24,8 +24,8 @@ #include "b43.h" #include "tables_nphy.h" -#include "phy.h" -#include "nphy.h" +#include "phy_common.h" +#include "phy_n.h" struct b2055_inittab_entry { diff --git a/drivers/net/wireless/b43/wa.c b/drivers/net/wireless/b43/wa.c index daa94211f838..0c0fb15abb9f 100644 --- a/drivers/net/wireless/b43/wa.c +++ b/drivers/net/wireless/b43/wa.c @@ -27,7 +27,7 @@ #include "b43.h" #include "main.h" #include "tables.h" -#include "phy.h" +#include "phy_common.h" #include "wa.h" static void b43_wa_papd(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 9dda8169f7cc..2fabcf8f0474 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -28,7 +28,7 @@ */ #include "xmit.h" -#include "phy.h" +#include "phy_common.h" #include "dma.h" #include "pio.h" @@ -208,7 +208,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, txrate = ieee80211_get_tx_rate(dev->wl->hw, info); rate = txrate ? txrate->hw_value : B43_CCK_RATE_1MB; rate_ofdm = b43_is_ofdm_rate(rate); - fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info) ? : txrate; + fbrate = ieee80211_get_alt_retry_rate(dev->wl->hw, info, 0) ? : txrate; rate_fb = fbrate->hw_value; rate_fb_ofdm = b43_is_ofdm_rate(rate_fb); @@ -252,7 +252,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, } /* Hardware appends ICV. */ - plcp_fragment_len += info->control.icv_len; + plcp_fragment_len += info->control.hw_key->icv_len; key_idx = b43_kidx_to_fw(dev, key_idx); mac_ctl |= (key_idx << B43_TXH_MAC_KEYIDX_SHIFT) & @@ -260,7 +260,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, mac_ctl |= (key->algorithm << B43_TXH_MAC_KEYALG_SHIFT) & B43_TXH_MAC_KEYALG; wlhdr_len = ieee80211_hdrlen(fctl); - iv_len = min((size_t) info->control.iv_len, + iv_len = min((size_t) info->control.hw_key->iv_len, ARRAY_SIZE(txhdr->iv)); memcpy(txhdr->iv, ((u8 *) wlhdr) + wlhdr_len, iv_len); } @@ -431,6 +431,7 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, int adjust_2053, int adjust_2050) { struct b43_phy *phy = &dev->phy; + struct b43_phy_g *gphy = phy->g; s32 tmp; switch (phy->radio_ver) { @@ -450,7 +451,8 @@ static s8 b43_rssi_postprocess(struct b43_wldev *dev, boardflags_lo & B43_BFL_RSSI) { if (in_rssi > 63) in_rssi = 63; - tmp = phy->nrssi_lt[in_rssi]; + B43_WARN_ON(phy->type != B43_PHYTYPE_G); + tmp = gphy->nrssi_lt[in_rssi]; tmp = 31 - tmp; tmp *= -131; tmp /= 128; @@ -678,6 +680,8 @@ void b43_handle_txstatus(struct b43_wldev *dev, b43_pio_handle_txstatus(dev, status); else b43_dma_handle_txstatus(dev, status); + + b43_phy_txpower_check(dev, 0); } /* Fill out the mac80211 TXstatus report based on the b43-specific |