diff options
author | Rakesh Pillai <pillair@codeaurora.org> | 2019-01-29 14:56:07 +0530 |
---|---|---|
committer | Kalle Valo <kvalo@codeaurora.org> | 2019-02-07 16:51:13 +0200 |
commit | cdb78e5af49105917ba5694bc616d12b0a4f85f3 (patch) | |
tree | daae2bd200cdc72e4d20bbb4bd0dbf3e160b737c /drivers/net/wireless/ath/ath10k | |
parent | 6e8a8991e2103dcb6a9cff28f460390e8e360848 (diff) | |
download | linux-cdb78e5af49105917ba5694bc616d12b0a4f85f3.tar.bz2 |
ath10k: fix hw-restart crash inject mode for WCN3990
The hw-restart crash inject mode is a special mode, where
there is no crash generated in the firmware, but instead
the driver restarts the firmware. In order to restart WCN3990
firmware, the driver needs to send qmi_wlan_disable message
followed by the qmi_wlan_enable message to the WCN3990 firmware.
Currently the qmi_wlan_disable message is not sent to
the WCN3990 firmware when hw-restart crash is injected,
which causes the firmware to crash when the driver sends
qmi_wlan_enable message during ath10k_restart.
Send qmi_wlan_disable to the WCN3990 firmware when the
hw-restart crash is injected via debugfs.
Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/ath/ath10k')
-rw-r--r-- | drivers/net/wireless/ath/ath10k/snoc.c | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index 0032bc5dd934..38d850bde089 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -1000,7 +1000,16 @@ static int ath10k_snoc_wlan_enable(struct ath10k *ar) static void ath10k_snoc_wlan_disable(struct ath10k *ar) { - if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); + + /* If both ATH10K_FLAG_CRASH_FLUSH and ATH10K_SNOC_FLAG_RECOVERY + * flags are not set, it means that the driver has restarted + * due to a crash inject via debugfs. In this case, the driver + * needs to restart the firmware and hence send qmi wlan disable, + * during the driver restart sequence. + */ + if (!test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags) || + !test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags)) ath10k_qmi_wlan_disable(ar); } |