diff options
| author | Rakesh Pillai <pillair@codeaurora.org> | 2019-02-08 15:50:10 +0200 |
|---|---|---|
| committer | Kalle Valo <kvalo@codeaurora.org> | 2019-02-11 18:33:53 +0200 |
| commit | 3c545a25939c27f85430588110c657ede5fdfe0a (patch) | |
| tree | a180feb63d02dba02dc9109578e8af10dc8ceedf /drivers/net/wireless/ath/ath10k/core.c | |
| parent | 25733c4e67df7f29a599bbd9ed313c172d72a02b (diff) | |
| download | linux-3c545a25939c27f85430588110c657ede5fdfe0a.tar.bz2 | |
ath10k: enable Factory Test Mode for WCN3990
The support to put WCN3990 firmware into Factory
test mode is not present currently. The WCN3990
firmware can operate in Factory test mode based
on the mode it receives in the wlan enable message
from the host driver.
When the host driver is started in testmode send
the operating mode as UTF mode, to the WCN3990
firmware, in the wlan enable message to start the
firmware in Factory test mode.
Tested on: WCN3990
Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1.
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/core.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index f64008b5da0d..ca6085076c68 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2780,7 +2780,7 @@ static int ath10k_core_probe_fw(struct ath10k *ar) struct bmi_target_info target_info; int ret = 0; - ret = ath10k_hif_power_up(ar); + ret = ath10k_hif_power_up(ar, ATH10K_FIRMWARE_MODE_NORMAL); if (ret) { ath10k_err(ar, "could not power on hif bus (%d)\n", ret); return ret; |