diff options
| author | Neil Horman <nhorman@tuxdriver.com> | 2017-05-12 12:00:01 -0400 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2017-05-12 12:23:52 -0400 |
| commit | 1c4d5f51a812a82de97beee24f48ed05c65ebda5 (patch) | |
| tree | 168b055b2c850758eaaf6ab8862f87577bc86d98 /drivers/net/vmxnet3 | |
| parent | 42e6cae1b35b186650f5abc7b24c20ab6986c5a0 (diff) | |
| download | linux-1c4d5f51a812a82de97beee24f48ed05c65ebda5.tar.bz2 | |
vmxnet3: ensure that adapter is in proper state during force_close
There are several paths in vmxnet3, where settings changes cause the
adapter to be brought down and back up (vmxnet3_set_ringparam among
them). Should part of the reset operation fail, these paths call
vmxnet3_force_close, which enables all napi instances prior to calling
dev_close (with the expectation that vmxnet3_close will then properly
disable them again). However, vmxnet3_force_close neglects to clear
VMXNET3_STATE_BIT_QUIESCED prior to calling dev_close. As a result
vmxnet3_quiesce_dev (called from vmxnet3_close), returns early, and
leaves all the napi instances in a enabled state while the device itself
is closed. If a device in this state is activated again, napi_enable
will be called on already enabled napi_instances, leading to a BUG halt.
The fix is to simply enausre that the QUIESCED bit is cleared in
vmxnet3_force_close to allow quesence to be completed properly on close.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/vmxnet3')
| -rw-r--r-- | drivers/net/vmxnet3/vmxnet3_drv.c | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 25bc764ae7dc..d1c7029ded7c 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -2962,6 +2962,11 @@ vmxnet3_force_close(struct vmxnet3_adapter *adapter) /* we need to enable NAPI, otherwise dev_close will deadlock */ for (i = 0; i < adapter->num_rx_queues; i++) napi_enable(&adapter->rx_queue[i].napi); + /* + * Need to clear the quiesce bit to ensure that vmxnet3_close + * can quiesce the device properly + */ + clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state); dev_close(adapter->netdev); } |