Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

The forcedeth changes had a conflict with the conversion over
to atomic u64 statistics in net-next.

The libertas cfg.c code had a conflict with the bss reference
counting fix by John Linville in net-next.

Conflicts:
	drivers/net/ethernet/nvidia/forcedeth.c
	drivers/net/wireless/libertas/cfg.c

3 files changed, 64 insertions, 31 deletions

diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index e81e22e3d1d2..e6fed4d4cb77 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -36,7 +36,7 @@
 #include <linux/usb/usbnet.h>
 #include <linux/slab.h>
 
-#define DRIVER_VERSION "26-Sep-2011"
+#define DRIVER_VERSION "08-Nov-2011"
 #define DRIVER_NAME "asix"
 
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
@@ -163,7 +163,7 @@
 #define MARVELL_CTRL_TXDELAY	0x0002
 #define MARVELL_CTRL_RXDELAY	0x0080
 
-#define	PHY_MODE_RTL8211CL	0x0004
+#define	PHY_MODE_RTL8211CL	0x000C
 
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
 struct asix_data {
@@ -652,9 +652,17 @@ static u32 asix_get_phyid(struct usbnet *dev)
 {
 	int phy_reg;
 	u32 phy_id;
+	int i;
 
-	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
-	if (phy_reg < 0)
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
 		return 0;
 
 	phy_id = (phy_reg & 0xffff) << 16;
@@ -1075,7 +1083,7 @@ static const struct net_device_ops ax88772_netdev_ops = {
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
+	int ret, embd_phy;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	u8 buf[ETH_ALEN];
 	u32 phyid;
@@ -1100,16 +1108,36 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->mii.reg_num_mask = 0x1f;
 	dev->mii.phy_id = asix_get_phy_addr(dev);
 
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
-
 	dev->net->netdev_ops = &ax88772_netdev_ops;
 	dev->net->ethtool_ops = &ax88772_ethtool_ops;
 
-	ret = ax88772_reset(dev);
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+
+	/* Reset the PHY to normal operation mode */
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		dbg("Select PHY #1 failed: %d", ret);
+		return ret;
+	}
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
+	if (ret < 0)
+		return ret;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
 	if (ret < 0)
 		return ret;
 
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
 		/* hard_mtu  is still the default - the device does not support
@@ -1220,6 +1248,7 @@ static int ax88178_reset(struct usbnet *dev)
 	__le16 eeprom;
 	u8 status;
 	int gpio0 = 0;
+	u32 phyid;
 
 	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status);
 	dbg("GPIO Status: 0x%04x", status);
@@ -1235,12 +1264,13 @@ static int ax88178_reset(struct usbnet *dev)
 		data->ledmode = 0;
 		gpio0 = 1;
 	} else {
-		data->phymode = le16_to_cpu(eeprom) & 7;
+		data->phymode = le16_to_cpu(eeprom) & 0x7F;
 		data->ledmode = le16_to_cpu(eeprom) >> 8;
 		gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
 	}
 	dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
 
+	/* Power up external GigaPHY through AX88178 GPIO pin */
 	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
 	if ((le16_to_cpu(eeprom) >> 8) != 1) {
 		asix_write_gpio(dev, 0x003c, 30);
@@ -1252,6 +1282,13 @@ static int ax88178_reset(struct usbnet *dev)
 		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
 	}
 
+	/* Read PHYID register *AFTER* powering up PHY */
+	phyid = asix_get_phyid(dev);
+	dbg("PHYID=0x%08x", phyid);
+
+	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL);
+
 	asix_sw_reset(dev, 0);
 	msleep(150);
 
@@ -1396,7 +1433,6 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret;
 	u8 buf[ETH_ALEN];
-	u32 phyid;
 	struct asix_data *data = (struct asix_data *)&dev->data;
 
 	data->eeprom_len = AX88772_EEPROM_LEN;
@@ -1423,12 +1459,12 @@ static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 	dev->net->netdev_ops = &ax88178_netdev_ops;
 	dev->net->ethtool_ops = &ax88178_ethtool_ops;
 
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
+	/* Blink LEDS so users know driver saw dongle */
+	asix_sw_reset(dev, 0);
+	msleep(150);
 
-	ret = ax88178_reset(dev);
-	if (ret < 0)
-		return ret;
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
+	msleep(150);
 
 	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index c924ea2bce07..99ed6eb4dfaf 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -567,7 +567,7 @@ static const struct usb_device_id	products [] = {
 {
 	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long)&wwan_info,
+	.driver_info = 0,
 },
 
 /*
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index d43db32f9478..9c26c6390d69 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -144,10 +144,11 @@ static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	}
 
 	frame = (struct vl600_frame_hdr *) buf->data;
-	/* NOTE: Should check that frame->magic == 0x53544448?
-	 * Otherwise if we receive garbage at the beginning of the frame
-	 * we may end up allocating a huge buffer and saving all the
-	 * future incoming data into it.  */
+	/* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+	 * otherwise we may run out of memory w/a bad packet */
+	if (ntohl(frame->magic) != 0x53544448 &&
+			ntohl(frame->magic) != 0x44544d48)
+		goto error;
 
 	if (buf->len < sizeof(*frame) ||
 			buf->len != le32_to_cpup(&frame->len)) {
@@ -296,6 +297,11 @@ encapsulate:
 	 * overwrite the remaining fields.
 	 */
 	packet = (struct vl600_pkt_hdr *) skb->data;
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Since this modem only supports IPv4 and IPv6, just set all
+	 * frames to 0x0800 (ETH_P_IP)
+	 */
+	packet->h_proto = htons(ETH_P_IP);
 	memset(&packet->dummy, 0, sizeof(packet->dummy));
 	packet->len = cpu_to_le32(orig_len);
 
@@ -308,21 +314,12 @@ encapsulate:
 	if (skb->len < full_len) /* Pad */
 		skb_put(skb, full_len - skb->len);
 
-	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
-	 * Check if this is an IPv6 packet, and set the ethertype
-	 * to 0x800
-	 */
-	if ((skb->data[sizeof(struct vl600_pkt_hdr *) + 0x22] & 0xf0) == 0x60) {
-		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x20] = 0x08;
-		skb->data[sizeof(struct vl600_pkt_hdr *) + 0x21] = 0;
-	}
-
 	return skb;
 }
 
 static const struct driver_info	vl600_info = {
 	.description	= "LG VL600 modem",
-	.flags		= FLAG_ETHER | FLAG_RX_ASSEMBLE,
+	.flags		= FLAG_RX_ASSEMBLE | FLAG_WWAN,
 	.bind		= vl600_bind,
 	.unbind		= vl600_unbind,
 	.status		= usbnet_cdc_status,