ewrk3/tulip: Move the DEC - Tulip drivers

Move the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/
and make the necessary Kconfig and Makefile changes.

The Digital Equioment (DEC) driver ewrk3 was moved into
drivers/net/ethernet/dec/ and the remaining drivers (Tulip)
were moved into drivers/net/ethernet/dec/tulip/

CC: Tobias Ringstrom <tori@unhappy.mine.nu>
CC: Grant Grundler <grundler@parisc-linux.org>
CC: David Davies <davies@maniac.ultranet.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>

1 files changed, 0 insertions, 556 deletions

diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
deleted file mode 100644
index 4bd13922875d..000000000000
--- a/drivers/net/tulip/media.c
+++ /dev/null
@@ -1,556 +0,0 @@
-/*
-	drivers/net/tulip/media.c
-
-	Copyright 2000,2001  The Linux Kernel Team
-	Written/copyright 1994-2001 by Donald Becker.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
-	for more information on this driver.
-
-	Please submit bugs to http://bugzilla.kernel.org/ .
-*/
-
-#include <linux/kernel.h>
-#include <linux/mii.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include "tulip.h"
-
-
-/* The maximum data clock rate is 2.5 Mhz.  The minimum timing is usually
-   met by back-to-back PCI I/O cycles, but we insert a delay to avoid
-   "overclocking" issues or future 66Mhz PCI. */
-#define mdio_delay() ioread32(mdio_addr)
-
-/* Read and write the MII registers using software-generated serial
-   MDIO protocol.  It is just different enough from the EEPROM protocol
-   to not share code.  The maxium data clock rate is 2.5 Mhz. */
-#define MDIO_SHIFT_CLK		0x10000
-#define MDIO_DATA_WRITE0	0x00000
-#define MDIO_DATA_WRITE1	0x20000
-#define MDIO_ENB		0x00000 /* Ignore the 0x02000 databook setting. */
-#define MDIO_ENB_IN		0x40000
-#define MDIO_DATA_READ		0x80000
-
-static const unsigned char comet_miireg2offset[32] = {
-	0xB4, 0xB8, 0xBC, 0xC0,  0xC4, 0xC8, 0xCC, 0,  0,0,0,0,  0,0,0,0,
-	0,0xD0,0,0,  0,0,0,0,  0,0,0,0, 0, 0xD4, 0xD8, 0xDC, };
-
-
-/* MII transceiver control section.
-   Read and write the MII registers using software-generated serial
-   MDIO protocol.
-   See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management functions")
-   or DP83840A data sheet for more details.
-   */
-
-int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int i;
-	int read_cmd = (0xf6 << 10) | ((phy_id & 0x1f) << 5) | location;
-	int retval = 0;
-	void __iomem *ioaddr = tp->base_addr;
-	void __iomem *mdio_addr = ioaddr + CSR9;
-	unsigned long flags;
-
-	if (location & ~0x1f)
-		return 0xffff;
-
-	if (tp->chip_id == COMET  &&  phy_id == 30) {
-		if (comet_miireg2offset[location])
-			return ioread32(ioaddr + comet_miireg2offset[location]);
-		return 0xffff;
-	}
-
-	spin_lock_irqsave(&tp->mii_lock, flags);
-	if (tp->chip_id == LC82C168) {
-		iowrite32(0x60020000 + (phy_id<<23) + (location<<18), ioaddr + 0xA0);
-		ioread32(ioaddr + 0xA0);
-		ioread32(ioaddr + 0xA0);
-		for (i = 1000; i >= 0; --i) {
-			barrier();
-			if ( ! ((retval = ioread32(ioaddr + 0xA0)) & 0x80000000))
-				break;
-		}
-		spin_unlock_irqrestore(&tp->mii_lock, flags);
-		return retval & 0xffff;
-	}
-
-	/* Establish sync by sending at least 32 logic ones. */
-	for (i = 32; i >= 0; i--) {
-		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
-		mdio_delay();
-		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
-		mdio_delay();
-	}
-	/* Shift the read command bits out. */
-	for (i = 15; i >= 0; i--) {
-		int dataval = (read_cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
-
-		iowrite32(MDIO_ENB | dataval, mdio_addr);
-		mdio_delay();
-		iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
-		mdio_delay();
-	}
-	/* Read the two transition, 16 data, and wire-idle bits. */
-	for (i = 19; i > 0; i--) {
-		iowrite32(MDIO_ENB_IN, mdio_addr);
-		mdio_delay();
-		retval = (retval << 1) | ((ioread32(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
-		iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	spin_unlock_irqrestore(&tp->mii_lock, flags);
-	return (retval>>1) & 0xffff;
-}
-
-void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int i;
-	int cmd = (0x5002 << 16) | ((phy_id & 0x1f) << 23) | (location<<18) | (val & 0xffff);
-	void __iomem *ioaddr = tp->base_addr;
-	void __iomem *mdio_addr = ioaddr + CSR9;
-	unsigned long flags;
-
-	if (location & ~0x1f)
-		return;
-
-	if (tp->chip_id == COMET && phy_id == 30) {
-		if (comet_miireg2offset[location])
-			iowrite32(val, ioaddr + comet_miireg2offset[location]);
-		return;
-	}
-
-	spin_lock_irqsave(&tp->mii_lock, flags);
-	if (tp->chip_id == LC82C168) {
-		iowrite32(cmd, ioaddr + 0xA0);
-		for (i = 1000; i >= 0; --i) {
-			barrier();
-			if ( ! (ioread32(ioaddr + 0xA0) & 0x80000000))
-				break;
-		}
-		spin_unlock_irqrestore(&tp->mii_lock, flags);
-		return;
-	}
-
-	/* Establish sync by sending 32 logic ones. */
-	for (i = 32; i >= 0; i--) {
-		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
-		mdio_delay();
-		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
-		mdio_delay();
-	}
-	/* Shift the command bits out. */
-	for (i = 31; i >= 0; i--) {
-		int dataval = (cmd & (1 << i)) ? MDIO_DATA_WRITE1 : 0;
-		iowrite32(MDIO_ENB | dataval, mdio_addr);
-		mdio_delay();
-		iowrite32(MDIO_ENB | dataval | MDIO_SHIFT_CLK, mdio_addr);
-		mdio_delay();
-	}
-	/* Clear out extra bits. */
-	for (i = 2; i > 0; i--) {
-		iowrite32(MDIO_ENB_IN, mdio_addr);
-		mdio_delay();
-		iowrite32(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
-		mdio_delay();
-	}
-
-	spin_unlock_irqrestore(&tp->mii_lock, flags);
-}
-
-
-/* Set up the transceiver control registers for the selected media type. */
-void tulip_select_media(struct net_device *dev, int startup)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->base_addr;
-	struct mediatable *mtable = tp->mtable;
-	u32 new_csr6;
-	int i;
-
-	if (mtable) {
-		struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index];
-		unsigned char *p = mleaf->leafdata;
-		switch (mleaf->type) {
-		case 0:					/* 21140 non-MII xcvr. */
-			if (tulip_debug > 1)
-				netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n",
-					   p[1]);
-			dev->if_port = p[0];
-			if (startup)
-				iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
-			iowrite32(p[1], ioaddr + CSR12);
-			new_csr6 = 0x02000000 | ((p[2] & 0x71) << 18);
-			break;
-		case 2: case 4: {
-			u16 setup[5];
-			u32 csr13val, csr14val, csr15dir, csr15val;
-			for (i = 0; i < 5; i++)
-				setup[i] = get_u16(&p[i*2 + 1]);
-
-			dev->if_port = p[0] & MEDIA_MASK;
-			if (tulip_media_cap[dev->if_port] & MediaAlwaysFD)
-				tp->full_duplex = 1;
-
-			if (startup && mtable->has_reset) {
-				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
-				unsigned char *rst = rleaf->leafdata;
-				if (tulip_debug > 1)
-					netdev_dbg(dev, "Resetting the transceiver\n");
-				for (i = 0; i < rst[0]; i++)
-					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
-			}
-			if (tulip_debug > 1)
-				netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n",
-					   medianame[dev->if_port],
-					   setup[0], setup[1]);
-			if (p[0] & 0x40) {	/* SIA (CSR13-15) setup values are provided. */
-				csr13val = setup[0];
-				csr14val = setup[1];
-				csr15dir = (setup[3]<<16) | setup[2];
-				csr15val = (setup[4]<<16) | setup[2];
-				iowrite32(0, ioaddr + CSR13);
-				iowrite32(csr14val, ioaddr + CSR14);
-				iowrite32(csr15dir, ioaddr + CSR15);	/* Direction */
-				iowrite32(csr15val, ioaddr + CSR15);	/* Data */
-				iowrite32(csr13val, ioaddr + CSR13);
-			} else {
-				csr13val = 1;
-				csr14val = 0;
-				csr15dir = (setup[0]<<16) | 0x0008;
-				csr15val = (setup[1]<<16) | 0x0008;
-				if (dev->if_port <= 4)
-					csr14val = t21142_csr14[dev->if_port];
-				if (startup) {
-					iowrite32(0, ioaddr + CSR13);
-					iowrite32(csr14val, ioaddr + CSR14);
-				}
-				iowrite32(csr15dir, ioaddr + CSR15);	/* Direction */
-				iowrite32(csr15val, ioaddr + CSR15);	/* Data */
-				if (startup) iowrite32(csr13val, ioaddr + CSR13);
-			}
-			if (tulip_debug > 1)
-				netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n",
-					   csr15dir, csr15val);
-			if (mleaf->type == 4)
-				new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
-			else
-				new_csr6 = 0x82420000;
-			break;
-		}
-		case 1: case 3: {
-			int phy_num = p[0];
-			int init_length = p[1];
-			u16 *misc_info, tmp_info;
-
-			dev->if_port = 11;
-			new_csr6 = 0x020E0000;
-			if (mleaf->type == 3) {	/* 21142 */
-				u16 *init_sequence = (u16*)(p+2);
-				u16 *reset_sequence = &((u16*)(p+3))[init_length];
-				int reset_length = p[2 + init_length*2];
-				misc_info = reset_sequence + reset_length;
-				if (startup) {
-					int timeout = 10;	/* max 1 ms */
-					for (i = 0; i < reset_length; i++)
-						iowrite32(get_u16(&reset_sequence[i]) << 16, ioaddr + CSR15);
-
-					/* flush posted writes */
-					ioread32(ioaddr + CSR15);
-
-					/* Sect 3.10.3 in DP83840A.pdf (p39) */
-					udelay(500);
-
-					/* Section 4.2 in DP83840A.pdf (p43) */
-					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
-					while (timeout-- &&
-						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
-						udelay(100);
-				}
-				for (i = 0; i < init_length; i++)
-					iowrite32(get_u16(&init_sequence[i]) << 16, ioaddr + CSR15);
-
-				ioread32(ioaddr + CSR15);	/* flush posted writes */
-			} else {
-				u8 *init_sequence = p + 2;
-				u8 *reset_sequence = p + 3 + init_length;
-				int reset_length = p[2 + init_length];
-				misc_info = (u16*)(reset_sequence + reset_length);
-				if (startup) {
-					int timeout = 10;	/* max 1 ms */
-					iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
-					for (i = 0; i < reset_length; i++)
-						iowrite32(reset_sequence[i], ioaddr + CSR12);
-
-					/* flush posted writes */
-					ioread32(ioaddr + CSR12);
-
-					/* Sect 3.10.3 in DP83840A.pdf (p39) */
-					udelay(500);
-
-					/* Section 4.2 in DP83840A.pdf (p43) */
-					/* and IEEE 802.3 "22.2.4.1.1 Reset" */
-					while (timeout-- &&
-						(tulip_mdio_read (dev, phy_num, MII_BMCR) & BMCR_RESET))
-						udelay(100);
-				}
-				for (i = 0; i < init_length; i++)
-					iowrite32(init_sequence[i], ioaddr + CSR12);
-
-				ioread32(ioaddr + CSR12);	/* flush posted writes */
-			}
-
-			tmp_info = get_u16(&misc_info[1]);
-			if (tmp_info)
-				tp->advertising[phy_num] = tmp_info | 1;
-			if (tmp_info && startup < 2) {
-				if (tp->mii_advertise == 0)
-					tp->mii_advertise = tp->advertising[phy_num];
-				if (tulip_debug > 1)
-					netdev_dbg(dev, " Advertising %04x on MII %d\n",
-						   tp->mii_advertise,
-						   tp->phys[phy_num]);
-				tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
-			}
-			break;
-		}
-		case 5: case 6: {
-			u16 setup[5];
-
-			new_csr6 = 0; /* FIXME */
-
-			for (i = 0; i < 5; i++)
-				setup[i] = get_u16(&p[i*2 + 1]);
-
-			if (startup && mtable->has_reset) {
-				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
-				unsigned char *rst = rleaf->leafdata;
-				if (tulip_debug > 1)
-					netdev_dbg(dev, "Resetting the transceiver\n");
-				for (i = 0; i < rst[0]; i++)
-					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
-			}
-
-			break;
-		}
-		default:
-			netdev_dbg(dev, " Invalid media table selection %d\n",
-				   mleaf->type);
-			new_csr6 = 0x020E0000;
-		}
-		if (tulip_debug > 1)
-			netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n",
-				   medianame[dev->if_port],
-				   ioread32(ioaddr + CSR12) & 0xff);
-	} else if (tp->chip_id == LC82C168) {
-		if (startup && ! tp->medialock)
-			dev->if_port = tp->mii_cnt ? 11 : 0;
-		if (tulip_debug > 1)
-			netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n",
-				   ioread32(ioaddr + 0xB8),
-				   medianame[dev->if_port]);
-		if (tp->mii_cnt) {
-			new_csr6 = 0x810C0000;
-			iowrite32(0x0001, ioaddr + CSR15);
-			iowrite32(0x0201B07A, ioaddr + 0xB8);
-		} else if (startup) {
-			/* Start with 10mbps to do autonegotiation. */
-			iowrite32(0x32, ioaddr + CSR12);
-			new_csr6 = 0x00420000;
-			iowrite32(0x0001B078, ioaddr + 0xB8);
-			iowrite32(0x0201B078, ioaddr + 0xB8);
-		} else if (dev->if_port == 3  ||  dev->if_port == 5) {
-			iowrite32(0x33, ioaddr + CSR12);
-			new_csr6 = 0x01860000;
-			/* Trigger autonegotiation. */
-			iowrite32(startup ? 0x0201F868 : 0x0001F868, ioaddr + 0xB8);
-		} else {
-			iowrite32(0x32, ioaddr + CSR12);
-			new_csr6 = 0x00420000;
-			iowrite32(0x1F078, ioaddr + 0xB8);
-		}
-	} else {					/* Unknown chip type with no media table. */
-		if (tp->default_port == 0)
-			dev->if_port = tp->mii_cnt ? 11 : 3;
-		if (tulip_media_cap[dev->if_port] & MediaIsMII) {
-			new_csr6 = 0x020E0000;
-		} else if (tulip_media_cap[dev->if_port] & MediaIsFx) {
-			new_csr6 = 0x02860000;
-		} else
-			new_csr6 = 0x03860000;
-		if (tulip_debug > 1)
-			netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n",
-				   medianame[dev->if_port],
-				   ioread32(ioaddr + CSR12));
-	}
-
-	tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
-
-	mdelay(1);
-}
-
-/*
-  Check the MII negotiated duplex and change the CSR6 setting if
-  required.
-  Return 0 if everything is OK.
-  Return < 0 if the transceiver is missing or has no link beat.
-  */
-int tulip_check_duplex(struct net_device *dev)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	unsigned int bmsr, lpa, negotiated, new_csr6;
-
-	bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
-	lpa = tulip_mdio_read(dev, tp->phys[0], MII_LPA);
-	if (tulip_debug > 1)
-		dev_info(&dev->dev, "MII status %04x, Link partner report %04x\n",
-			 bmsr, lpa);
-	if (bmsr == 0xffff)
-		return -2;
-	if ((bmsr & BMSR_LSTATUS) == 0) {
-		int new_bmsr = tulip_mdio_read(dev, tp->phys[0], MII_BMSR);
-		if ((new_bmsr & BMSR_LSTATUS) == 0) {
-			if (tulip_debug  > 1)
-				dev_info(&dev->dev,
-					 "No link beat on the MII interface, status %04x\n",
-					 new_bmsr);
-			return -1;
-		}
-	}
-	negotiated = lpa & tp->advertising[0];
-	tp->full_duplex = mii_duplex(tp->full_duplex_lock, negotiated);
-
-	new_csr6 = tp->csr6;
-
-	if (negotiated & LPA_100) new_csr6 &= ~TxThreshold;
-	else			  new_csr6 |= TxThreshold;
-	if (tp->full_duplex) new_csr6 |= FullDuplex;
-	else		     new_csr6 &= ~FullDuplex;
-
-	if (new_csr6 != tp->csr6) {
-		tp->csr6 = new_csr6;
-		tulip_restart_rxtx(tp);
-
-		if (tulip_debug > 0)
-			dev_info(&dev->dev,
-				 "Setting %s-duplex based on MII#%d link partner capability of %04x\n",
-				 tp->full_duplex ? "full" : "half",
-				 tp->phys[0], lpa);
-		return 1;
-	}
-
-	return 0;
-}
-
-void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
-{
-	struct tulip_private *tp = netdev_priv(dev);
-	int phyn, phy_idx = 0;
-	int mii_reg0;
-	int mii_advert;
-	unsigned int to_advert, new_bmcr, ane_switch;
-
-	/* Find the connected MII xcvrs.
-	   Doing this in open() would allow detecting external xcvrs later,
-	   but takes much time. */
-	for (phyn = 1; phyn <= 32 && phy_idx < sizeof (tp->phys); phyn++) {
-		int phy = phyn & 0x1f;
-		int mii_status = tulip_mdio_read (dev, phy, MII_BMSR);
-		if ((mii_status & 0x8301) == 0x8001 ||
-		    ((mii_status & BMSR_100BASE4) == 0 &&
-		     (mii_status & 0x7800) != 0)) {
-			/* preserve Becker logic, gain indentation level */
-		} else {
-			continue;
-		}
-
-		mii_reg0 = tulip_mdio_read (dev, phy, MII_BMCR);
-		mii_advert = tulip_mdio_read (dev, phy, MII_ADVERTISE);
-		ane_switch = 0;
-
-		/* if not advertising at all, gen an
-		 * advertising value from the capability
-		 * bits in BMSR
-		 */
-		if ((mii_advert & ADVERTISE_ALL) == 0) {
-			unsigned int tmpadv = tulip_mdio_read (dev, phy, MII_BMSR);
-			mii_advert = ((tmpadv >> 6) & 0x3e0) | 1;
-		}
-
-		if (tp->mii_advertise) {
-			tp->advertising[phy_idx] =
-			to_advert = tp->mii_advertise;
-		} else if (tp->advertising[phy_idx]) {
-			to_advert = tp->advertising[phy_idx];
-		} else {
-			tp->advertising[phy_idx] =
-			tp->mii_advertise =
-			to_advert = mii_advert;
-		}
-
-		tp->phys[phy_idx++] = phy;
-
-		pr_info("tulip%d:  MII transceiver #%d config %04x status %04x advertising %04x\n",
-			board_idx, phy, mii_reg0, mii_status, mii_advert);
-
-		/* Fixup for DLink with miswired PHY. */
-		if (mii_advert != to_advert) {
-			pr_debug("tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
-				 board_idx, to_advert, phy, mii_advert);
-			tulip_mdio_write (dev, phy, 4, to_advert);
-		}
-
-		/* Enable autonegotiation: some boards default to off. */
-		if (tp->default_port == 0) {
-			new_bmcr = mii_reg0 | BMCR_ANENABLE;
-			if (new_bmcr != mii_reg0) {
-				new_bmcr |= BMCR_ANRESTART;
-				ane_switch = 1;
-			}
-		}
-		/* ...or disable nway, if forcing media */
-		else {
-			new_bmcr = mii_reg0 & ~BMCR_ANENABLE;
-			if (new_bmcr != mii_reg0)
-				ane_switch = 1;
-		}
-
-		/* clear out bits we never want at this point */
-		new_bmcr &= ~(BMCR_CTST | BMCR_FULLDPLX | BMCR_ISOLATE |
-			      BMCR_PDOWN | BMCR_SPEED100 | BMCR_LOOPBACK |
-			      BMCR_RESET);
-
-		if (tp->full_duplex)
-			new_bmcr |= BMCR_FULLDPLX;
-		if (tulip_media_cap[tp->default_port] & MediaIs100)
-			new_bmcr |= BMCR_SPEED100;
-
-		if (new_bmcr != mii_reg0) {
-			/* some phys need the ANE switch to
-			 * happen before forced media settings
-			 * will "take."  However, we write the
-			 * same value twice in order not to
-			 * confuse the sane phys.
-			 */
-			if (ane_switch) {
-				tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
-				udelay (10);
-			}
-			tulip_mdio_write (dev, phy, MII_BMCR, new_bmcr);
-		}
-	}
-	tp->mii_cnt = phy_idx;
-	if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
-		pr_info("tulip%d: ***WARNING***: No MII transceiver found!\n",
-			board_idx);
-		tp->phys[0] = 1;
-	}
-}