summaryrefslogtreecommitdiffstats
path: root/drivers/net/sungem_phy.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/sungem_phy.c
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/sungem_phy.c')
-rw-r--r--drivers/net/sungem_phy.c872
1 files changed, 872 insertions, 0 deletions
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
new file mode 100644
index 000000000000..0fca414d3657
--- /dev/null
+++ b/drivers/net/sungem_phy.c
@@ -0,0 +1,872 @@
+/*
+ * PHY drivers for the sungem ethernet driver.
+ *
+ * This file could be shared with other drivers.
+ *
+ * (c) 2002, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ *
+ * TODO:
+ * - Implement WOL
+ * - Add support for PHYs that provide an IRQ line
+ * - Eventually moved the entire polling state machine in
+ * there (out of the eth driver), so that it can easily be
+ * skipped on PHYs that implement it in hardware.
+ * - On LXT971 & BCM5201, Apple uses some chip specific regs
+ * to read the link status. Figure out why and if it makes
+ * sense to do the same (magic aneg ?)
+ * - Apple has some additional power management code for some
+ * Broadcom PHYs that they "hide" from the OpenSource version
+ * of darwin, still need to reverse engineer that
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+
+#include "sungem_phy.h"
+
+/* Link modes of the BCM5400 PHY */
+static int phy_BCM5400_link_table[8][3] = {
+ { 0, 0, 0 }, /* No link */
+ { 0, 0, 0 }, /* 10BT Half Duplex */
+ { 1, 0, 0 }, /* 10BT Full Duplex */
+ { 0, 1, 0 }, /* 100BT Half Duplex */
+ { 0, 1, 0 }, /* 100BT Half Duplex */
+ { 1, 1, 0 }, /* 100BT Full Duplex*/
+ { 1, 0, 1 }, /* 1000BT */
+ { 1, 0, 1 }, /* 1000BT */
+};
+
+static inline int __phy_read(struct mii_phy* phy, int id, int reg)
+{
+ return phy->mdio_read(phy->dev, id, reg);
+}
+
+static inline void __phy_write(struct mii_phy* phy, int id, int reg, int val)
+{
+ phy->mdio_write(phy->dev, id, reg, val);
+}
+
+static inline int phy_read(struct mii_phy* phy, int reg)
+{
+ return phy->mdio_read(phy->dev, phy->mii_id, reg);
+}
+
+static inline void phy_write(struct mii_phy* phy, int reg, int val)
+{
+ phy->mdio_write(phy->dev, phy->mii_id, reg, val);
+}
+
+static int reset_one_mii_phy(struct mii_phy* phy, int phy_id)
+{
+ u16 val;
+ int limit = 10000;
+
+ val = __phy_read(phy, phy_id, MII_BMCR);
+ val &= ~(BMCR_ISOLATE | BMCR_PDOWN);
+ val |= BMCR_RESET;
+ __phy_write(phy, phy_id, MII_BMCR, val);
+
+ udelay(100);
+
+ while (limit--) {
+ val = __phy_read(phy, phy_id, MII_BMCR);
+ if ((val & BMCR_RESET) == 0)
+ break;
+ udelay(10);
+ }
+ if ((val & BMCR_ISOLATE) && limit > 0)
+ __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+
+ return (limit <= 0);
+}
+
+static int bcm5201_init(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5201_MULTIPHY);
+ data &= ~MII_BCM5201_MULTIPHY_SUPERISOLATE;
+ phy_write(phy, MII_BCM5201_MULTIPHY, data);
+
+ phy_write(phy, MII_BCM5201_INTERRUPT, 0);
+
+ return 0;
+}
+
+static int bcm5201_suspend(struct mii_phy* phy)
+{
+ phy_write(phy, MII_BCM5201_INTERRUPT, 0);
+ phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
+
+ return 0;
+}
+
+static int bcm5221_init(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
+ data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data | MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR);
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ return 0;
+}
+
+static int bcm5221_suspend(struct mii_phy* phy)
+{
+ u16 data;
+
+ data = phy_read(phy, MII_BCM5221_TEST);
+ phy_write(phy, MII_BCM5221_TEST,
+ data | MII_BCM5221_TEST_ENABLE_SHADOWS);
+
+ data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
+ phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
+ data | MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE);
+
+ return 0;
+}
+
+static int bcm5400_init(struct mii_phy* phy)
+{
+ u16 data;
+
+ /* Configure for gigabit full duplex */
+ data = phy_read(phy, MII_BCM5400_AUXCONTROL);
+ data |= MII_BCM5400_AUXCONTROL_PWR10BASET;
+ phy_write(phy, MII_BCM5400_AUXCONTROL, data);
+
+ data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+ data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
+ phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+
+ udelay(100);
+
+ /* Reset and configure cascaded 10/100 PHY */
+ (void)reset_one_mii_phy(phy, 0x1f);
+
+ data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
+ data |= MII_BCM5201_MULTIPHY_SERIALMODE;
+ __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
+
+ data = phy_read(phy, MII_BCM5400_AUXCONTROL);
+ data &= ~MII_BCM5400_AUXCONTROL_PWR10BASET;
+ phy_write(phy, MII_BCM5400_AUXCONTROL, data);
+
+ return 0;
+}
+
+static int bcm5400_suspend(struct mii_phy* phy)
+{
+#if 0 /* Commented out in Darwin... someone has those dawn docs ? */
+ phy_write(phy, MII_BMCR, BMCR_PDOWN);
+#endif
+ return 0;
+}
+
+static int bcm5401_init(struct mii_phy* phy)
+{
+ u16 data;
+ int rev;
+
+ rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+ if (rev == 0 || rev == 3) {
+ /* Some revisions of 5401 appear to need this
+ * initialisation sequence to disable, according
+ * to OF, "tap power management"
+ *
+ * WARNING ! OF and Darwin don't agree on the
+ * register addresses. OF seem to interpret the
+ * register numbers below as decimal
+ *
+ * Note: This should (and does) match tg3_init_5401phy_dsp
+ * in the tg3.c driver. -DaveM
+ */
+ phy_write(phy, 0x18, 0x0c20);
+ phy_write(phy, 0x17, 0x0012);
+ phy_write(phy, 0x15, 0x1804);
+ phy_write(phy, 0x17, 0x0013);
+ phy_write(phy, 0x15, 0x1204);
+ phy_write(phy, 0x17, 0x8006);
+ phy_write(phy, 0x15, 0x0132);
+ phy_write(phy, 0x17, 0x8006);
+ phy_write(phy, 0x15, 0x0232);
+ phy_write(phy, 0x17, 0x201f);
+ phy_write(phy, 0x15, 0x0a20);
+ }
+
+ /* Configure for gigabit full duplex */
+ data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+ data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
+ phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+
+ udelay(10);
+
+ /* Reset and configure cascaded 10/100 PHY */
+ (void)reset_one_mii_phy(phy, 0x1f);
+
+ data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
+ data |= MII_BCM5201_MULTIPHY_SERIALMODE;
+ __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
+
+ return 0;
+}
+
+static int bcm5401_suspend(struct mii_phy* phy)
+{
+#if 0 /* Commented out in Darwin... someone has those dawn docs ? */
+ phy_write(phy, MII_BMCR, BMCR_PDOWN);
+#endif
+ return 0;
+}
+
+static int bcm5411_init(struct mii_phy* phy)
+{
+ u16 data;
+
+ /* Here's some more Apple black magic to setup
+ * some voltage stuffs.
+ */
+ phy_write(phy, 0x1c, 0x8c23);
+ phy_write(phy, 0x1c, 0x8ca3);
+ phy_write(phy, 0x1c, 0x8c23);
+
+ /* Here, Apple seems to want to reset it, do
+ * it as well
+ */
+ phy_write(phy, MII_BMCR, BMCR_RESET);
+ phy_write(phy, MII_BMCR, 0x1340);
+
+ data = phy_read(phy, MII_BCM5400_GB_CONTROL);
+ data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
+ phy_write(phy, MII_BCM5400_GB_CONTROL, data);
+
+ udelay(10);
+
+ /* Reset and configure cascaded 10/100 PHY */
+ (void)reset_one_mii_phy(phy, 0x1f);
+
+ return 0;
+}
+
+static int bcm5411_suspend(struct mii_phy* phy)
+{
+ phy_write(phy, MII_BMCR, BMCR_PDOWN);
+
+ return 0;
+}
+
+static int bcm5421_init(struct mii_phy* phy)
+{
+ u16 data;
+ int rev;
+
+ rev = phy_read(phy, MII_PHYSID2) & 0x000f;
+ if (rev == 0) {
+ /* This is borrowed from MacOS
+ */
+ phy_write(phy, 0x18, 0x1007);
+ data = phy_read(phy, 0x18);
+ phy_write(phy, 0x18, data | 0x0400);
+ phy_write(phy, 0x18, 0x0007);
+ data = phy_read(phy, 0x18);
+ phy_write(phy, 0x18, data | 0x0800);
+ phy_write(phy, 0x17, 0x000a);
+ data = phy_read(phy, 0x15);
+ phy_write(phy, 0x15, data | 0x0200);
+ }
+#if 0
+ /* This has to be verified before I enable it */
+ /* Enable automatic low-power */
+ phy_write(phy, 0x1c, 0x9002);
+ phy_write(phy, 0x1c, 0xa821);
+ phy_write(phy, 0x1c, 0x941d);
+#endif
+ return 0;
+}
+
+static int bcm5421k2_init(struct mii_phy* phy)
+{
+ /* Init code borrowed from OF */
+ phy_write(phy, 4, 0x01e1);
+ phy_write(phy, 9, 0x0300);
+
+ return 0;
+}
+
+static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ u16 ctl, adv;
+
+ phy->autoneg = 1;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ /* Setup 1000BT advertise */
+ adv = phy_read(phy, MII_1000BASETCONTROL);
+ adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP|MII_1000BASETCONTROL_HALFDUPLEXCAP);
+ if (advertise & SUPPORTED_1000baseT_Half)
+ adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
+ if (advertise & SUPPORTED_1000baseT_Full)
+ adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
+ phy_write(phy, MII_1000BASETCONTROL, adv);
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ u16 ctl;
+
+ phy->autoneg = 0;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
+
+ /* First reset the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch(speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ ctl |= BMCR_SPD2;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+
+ // XXX Should we set the sungem to GII now on 1000BT ?
+
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int bcm54xx_read_link(struct mii_phy *phy)
+{
+ int link_mode;
+ u16 val;
+
+ if (phy->autoneg) {
+ val = phy_read(phy, MII_BCM5400_AUXSTATUS);
+ link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
+ MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
+ phy->duplex = phy_BCM5400_link_table[link_mode][0] ? DUPLEX_FULL : DUPLEX_HALF;
+ phy->speed = phy_BCM5400_link_table[link_mode][2] ?
+ SPEED_1000 :
+ (phy_BCM5400_link_table[link_mode][1] ? SPEED_100 : SPEED_10);
+ val = phy_read(phy, MII_LPA);
+ phy->pause = ((val & LPA_PAUSE) != 0);
+ }
+ /* On non-aneg, we assume what we put in BMCR is the speed,
+ * though magic-aneg shouldn't prevent this case from occurring
+ */
+
+ return 0;
+}
+
+static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ u16 ctl, adv;
+
+ phy->autoneg = 1;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ /* Setup 1000BT advertise & enable crossover detect
+ * XXX How do we advertise 1000BT ? Darwin source is
+ * confusing here, they read from specific control and
+ * write to control... Someone has specs for those
+ * beasts ?
+ */
+ adv = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
+ adv |= MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX;
+ adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
+ MII_1000BASETCONTROL_HALFDUPLEXCAP);
+ if (advertise & SUPPORTED_1000baseT_Half)
+ adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
+ if (advertise & SUPPORTED_1000baseT_Full)
+ adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
+ phy_write(phy, MII_1000BASETCONTROL, adv);
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ u16 ctl, ctl2;
+
+ phy->autoneg = 0;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
+ ctl |= BMCR_RESET;
+
+ /* Select speed & duplex */
+ switch(speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ /* I'm not sure about the one below, again, Darwin source is
+ * quite confusing and I lack chip specs
+ */
+ case SPEED_1000:
+ ctl |= BMCR_SPD2;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+
+ /* Disable crossover. Again, the way Apple does it is strange,
+ * though I don't assume they are wrong ;)
+ */
+ ctl2 = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
+ ctl2 &= ~(MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX |
+ MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX |
+ MII_1000BASETCONTROL_FULLDUPLEXCAP |
+ MII_1000BASETCONTROL_HALFDUPLEXCAP);
+ if (speed == SPEED_1000)
+ ctl2 |= (fd == DUPLEX_FULL) ?
+ MII_1000BASETCONTROL_FULLDUPLEXCAP :
+ MII_1000BASETCONTROL_HALFDUPLEXCAP;
+ phy_write(phy, MII_1000BASETCONTROL, ctl2);
+
+ // XXX Should we set the sungem to GII now on 1000BT ?
+
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int marvell_read_link(struct mii_phy *phy)
+{
+ u16 status;
+
+ if (phy->autoneg) {
+ status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
+ if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
+ return -EAGAIN;
+ if (status & MII_M1011_PHY_SPEC_STATUS_1000)
+ phy->speed = SPEED_1000;
+ else if (status & MII_M1011_PHY_SPEC_STATUS_100)
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+ if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = 0; /* XXX Check against spec ! */
+ }
+ /* On non-aneg, we assume what we put in BMCR is the speed,
+ * though magic-aneg shouldn't prevent this case from occurring
+ */
+
+ return 0;
+}
+
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+ u16 ctl, adv;
+
+ phy->autoneg = 1;
+ phy->speed = SPEED_10;
+ phy->duplex = DUPLEX_HALF;
+ phy->pause = 0;
+ phy->advertising = advertise;
+
+ /* Setup standard advertise */
+ adv = phy_read(phy, MII_ADVERTISE);
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ phy_write(phy, MII_ADVERTISE, adv);
+
+ /* Start/Restart aneg */
+ ctl = phy_read(phy, MII_BMCR);
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+ u16 ctl;
+
+ phy->autoneg = 0;
+ phy->speed = speed;
+ phy->duplex = fd;
+ phy->pause = 0;
+
+ ctl = phy_read(phy, MII_BMCR);
+ ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
+
+ /* First reset the PHY */
+ phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+ /* Select speed & duplex */
+ switch(speed) {
+ case SPEED_10:
+ break;
+ case SPEED_100:
+ ctl |= BMCR_SPEED100;
+ break;
+ case SPEED_1000:
+ default:
+ return -EINVAL;
+ }
+ if (fd == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ phy_write(phy, MII_BMCR, ctl);
+
+ return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+ u16 status;
+
+ (void)phy_read(phy, MII_BMSR);
+ status = phy_read(phy, MII_BMSR);
+ if ((status & BMSR_LSTATUS) == 0)
+ return 0;
+ if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
+ return 0;
+ return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+ u16 lpa;
+
+ if (phy->autoneg) {
+ lpa = phy_read(phy, MII_LPA);
+
+ if (lpa & (LPA_10FULL | LPA_100FULL))
+ phy->duplex = DUPLEX_FULL;
+ else
+ phy->duplex = DUPLEX_HALF;
+ if (lpa & (LPA_100FULL | LPA_100HALF))
+ phy->speed = SPEED_100;
+ else
+ phy->speed = SPEED_10;
+ phy->pause = 0;
+ }
+ /* On non-aneg, we assume what we put in BMCR is the speed,
+ * though magic-aneg shouldn't prevent this case from occurring
+ */
+
+ return 0;
+}
+
+
+#define MII_BASIC_FEATURES (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
+#define MII_GBIT_FEATURES (MII_BASIC_FEATURES | \
+ SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+
+/* Broadcom BCM 5201 */
+static struct mii_phy_ops bcm5201_phy_ops = {
+ .init = bcm5201_init,
+ .suspend = bcm5201_suspend,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link,
+};
+
+static struct mii_phy_def bcm5201_phy_def = {
+ .phy_id = 0x00406210,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5201",
+ .features = MII_BASIC_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5201_phy_ops
+};
+
+/* Broadcom BCM 5221 */
+static struct mii_phy_ops bcm5221_phy_ops = {
+ .suspend = bcm5221_suspend,
+ .init = bcm5221_init,
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link,
+};
+
+static struct mii_phy_def bcm5221_phy_def = {
+ .phy_id = 0x004061e0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5221",
+ .features = MII_BASIC_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5221_phy_ops
+};
+
+/* Broadcom BCM 5400 */
+static struct mii_phy_ops bcm5400_phy_ops = {
+ .init = bcm5400_init,
+ .suspend = bcm5400_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+};
+
+static struct mii_phy_def bcm5400_phy_def = {
+ .phy_id = 0x00206040,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5400",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5400_phy_ops
+};
+
+/* Broadcom BCM 5401 */
+static struct mii_phy_ops bcm5401_phy_ops = {
+ .init = bcm5401_init,
+ .suspend = bcm5401_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+};
+
+static struct mii_phy_def bcm5401_phy_def = {
+ .phy_id = 0x00206050,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5401",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5401_phy_ops
+};
+
+/* Broadcom BCM 5411 */
+static struct mii_phy_ops bcm5411_phy_ops = {
+ .init = bcm5411_init,
+ .suspend = bcm5411_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+};
+
+static struct mii_phy_def bcm5411_phy_def = {
+ .phy_id = 0x00206070,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5411",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5411_phy_ops
+};
+
+/* Broadcom BCM 5421 */
+static struct mii_phy_ops bcm5421_phy_ops = {
+ .init = bcm5421_init,
+ .suspend = bcm5411_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+};
+
+static struct mii_phy_def bcm5421_phy_def = {
+ .phy_id = 0x002060e0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5421",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5421_phy_ops
+};
+
+/* Broadcom BCM 5421 built-in K2 */
+static struct mii_phy_ops bcm5421k2_phy_ops = {
+ .init = bcm5421k2_init,
+ .suspend = bcm5411_suspend,
+ .setup_aneg = bcm54xx_setup_aneg,
+ .setup_forced = bcm54xx_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = bcm54xx_read_link,
+};
+
+static struct mii_phy_def bcm5421k2_phy_def = {
+ .phy_id = 0x002062e0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "BCM5421-K2",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &bcm5421k2_phy_ops
+};
+
+/* Marvell 88E1101 (Apple seem to deal with 2 different revs,
+ * I masked out the 8 last bits to get both, but some specs
+ * would be useful here) --BenH.
+ */
+static struct mii_phy_ops marvell_phy_ops = {
+ .setup_aneg = marvell_setup_aneg,
+ .setup_forced = marvell_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = marvell_read_link
+};
+
+static struct mii_phy_def marvell_phy_def = {
+ .phy_id = 0x01410c00,
+ .phy_id_mask = 0xffffff00,
+ .name = "Marvell 88E1101",
+ .features = MII_GBIT_FEATURES,
+ .magic_aneg = 1,
+ .ops = &marvell_phy_ops
+};
+
+/* Generic implementation for most 10/100 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+ .setup_aneg = genmii_setup_aneg,
+ .setup_forced = genmii_setup_forced,
+ .poll_link = genmii_poll_link,
+ .read_link = genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+ .phy_id = 0x00000000,
+ .phy_id_mask = 0x00000000,
+ .name = "Generic MII",
+ .features = MII_BASIC_FEATURES,
+ .magic_aneg = 0,
+ .ops = &generic_phy_ops
+};
+
+static struct mii_phy_def* mii_phy_table[] = {
+ &bcm5201_phy_def,
+ &bcm5221_phy_def,
+ &bcm5400_phy_def,
+ &bcm5401_phy_def,
+ &bcm5411_phy_def,
+ &bcm5421_phy_def,
+ &bcm5421k2_phy_def,
+ &marvell_phy_def,
+ &genmii_phy_def,
+ NULL
+};
+
+int mii_phy_probe(struct mii_phy *phy, int mii_id)
+{
+ int rc;
+ u32 id;
+ struct mii_phy_def* def;
+ int i;
+
+ /* We do not reset the mii_phy structure as the driver
+ * may re-probe the PHY regulary
+ */
+ phy->mii_id = mii_id;
+
+ /* Take PHY out of isloate mode and reset it. */
+ rc = reset_one_mii_phy(phy, mii_id);
+ if (rc)
+ goto fail;
+
+ /* Read ID and find matching entry */
+ id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
+ printk(KERN_DEBUG "PHY ID: %x, addr: %x\n", id, mii_id);
+ for (i=0; (def = mii_phy_table[i]) != NULL; i++)
+ if ((id & def->phy_id_mask) == def->phy_id)
+ break;
+ /* Should never be NULL (we have a generic entry), but... */
+ if (def == NULL)
+ goto fail;
+
+ phy->def = def;
+
+ return 0;
+fail:
+ phy->speed = 0;
+ phy->duplex = 0;
+ phy->pause = 0;
+ phy->advertising = 0;
+ return -ENODEV;
+}
+
+EXPORT_SYMBOL(mii_phy_probe);
+MODULE_LICENSE("GPL");
+