diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-09-13 13:24:59 -0400 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-09-13 13:24:59 -0400 |
commit | 6aa20a2235535605db6d6d2bd850298b2fe7f31e (patch) | |
tree | df0b855043407b831d57f2f2c271f8aab48444f4 /drivers/net/sungem_phy.c | |
parent | 7a291083225af6e22ffaa46b3d91cfc1a1ccaab4 (diff) | |
download | linux-6aa20a2235535605db6d6d2bd850298b2fe7f31e.tar.bz2 |
drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/sungem_phy.c')
-rw-r--r-- | drivers/net/sungem_phy.c | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c index 278c7cb22216..49800b25907d 100644 --- a/drivers/net/sungem_phy.c +++ b/drivers/net/sungem_phy.c @@ -1,8 +1,8 @@ /* * PHY drivers for the sungem ethernet driver. - * + * * This file could be shared with other drivers. - * + * * (c) 2002, Benjamin Herrenscmidt (benh@kernel.crashing.org) * * TODO: @@ -73,7 +73,7 @@ static int reset_one_mii_phy(struct mii_phy* phy, int phy_id) { u16 val; int limit = 10000; - + val = __phy_read(phy, phy_id, MII_BMCR); val &= ~(BMCR_ISOLATE | BMCR_PDOWN); val |= BMCR_RESET; @@ -89,7 +89,7 @@ static int reset_one_mii_phy(struct mii_phy* phy, int phy_id) } if ((val & BMCR_ISOLATE) && limit > 0) __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE); - + return (limit <= 0); } @@ -160,16 +160,16 @@ static int bcm5400_init(struct mii_phy* phy) data = phy_read(phy, MII_BCM5400_AUXCONTROL); data |= MII_BCM5400_AUXCONTROL_PWR10BASET; phy_write(phy, MII_BCM5400_AUXCONTROL, data); - + data = phy_read(phy, MII_BCM5400_GB_CONTROL); data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP; phy_write(phy, MII_BCM5400_GB_CONTROL, data); - + udelay(100); /* Reset and configure cascaded 10/100 PHY */ (void)reset_one_mii_phy(phy, 0x1f); - + data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY); data |= MII_BCM5201_MULTIPHY_SERIALMODE; __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data); @@ -199,7 +199,7 @@ static int bcm5401_init(struct mii_phy* phy) /* Some revisions of 5401 appear to need this * initialisation sequence to disable, according * to OF, "tap power management" - * + * * WARNING ! OF and Darwin don't agree on the * register addresses. OF seem to interpret the * register numbers below as decimal @@ -219,7 +219,7 @@ static int bcm5401_init(struct mii_phy* phy) phy_write(phy, 0x17, 0x201f); phy_write(phy, 0x15, 0x0a20); } - + /* Configure for gigabit full duplex */ data = phy_read(phy, MII_BCM5400_GB_CONTROL); data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP; @@ -229,7 +229,7 @@ static int bcm5401_init(struct mii_phy* phy) /* Reset and configure cascaded 10/100 PHY */ (void)reset_one_mii_phy(phy, 0x1f); - + data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY); data |= MII_BCM5201_MULTIPHY_SERIALMODE; __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data); @@ -270,7 +270,7 @@ static int bcm5411_init(struct mii_phy* phy) /* Reset and configure cascaded 10/100 PHY */ (void)reset_one_mii_phy(phy, 0x1f); - + return 0; } @@ -355,7 +355,7 @@ static int bcm5461_enable_fiber(struct mii_phy* phy) static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise) { u16 ctl, adv; - + phy->autoneg = 1; phy->speed = SPEED_10; phy->duplex = DUPLEX_HALF; @@ -395,7 +395,7 @@ static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise) static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd) { u16 ctl; - + phy->autoneg = 0; phy->speed = speed; phy->duplex = fd; @@ -421,7 +421,7 @@ static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd) ctl |= BMCR_FULLDPLX; // XXX Should we set the sungem to GII now on 1000BT ? - + phy_write(phy, MII_BMCR, ctl); return 0; @@ -429,9 +429,9 @@ static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd) static int bcm54xx_read_link(struct mii_phy *phy) { - int link_mode; + int link_mode; u16 val; - + if (phy->autoneg) { val = phy_read(phy, MII_BCM5400_AUXSTATUS); link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >> @@ -453,7 +453,7 @@ static int bcm54xx_read_link(struct mii_phy *phy) static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise) { u16 ctl, adv; - + phy->autoneg = 1; phy->speed = SPEED_10; phy->duplex = DUPLEX_HALF; @@ -500,7 +500,7 @@ static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise) static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd) { u16 ctl, ctl2; - + phy->autoneg = 0; phy->speed = speed; phy->duplex = fd; @@ -541,7 +541,7 @@ static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd) phy_write(phy, MII_1000BASETCONTROL, ctl2); // XXX Should we set the sungem to GII now on 1000BT ? - + phy_write(phy, MII_BMCR, ctl); return 0; @@ -577,7 +577,7 @@ static int marvell_read_link(struct mii_phy *phy) static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) { u16 ctl, adv; - + phy->autoneg = 1; phy->speed = SPEED_10; phy->duplex = DUPLEX_HALF; @@ -608,7 +608,7 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) { u16 ctl; - + phy->autoneg = 0; phy->speed = speed; phy->duplex = fd; @@ -641,7 +641,7 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) static int genmii_poll_link(struct mii_phy *phy) { u16 status; - + (void)phy_read(phy, MII_BMSR); status = phy_read(phy, MII_BMSR); if ((status & BMSR_LSTATUS) == 0) @@ -918,13 +918,13 @@ int mii_phy_probe(struct mii_phy *phy, int mii_id) * may re-probe the PHY regulary */ phy->mii_id = mii_id; - + /* Take PHY out of isloate mode and reset it. */ rc = reset_one_mii_phy(phy, mii_id); if (rc) goto fail; - /* Read ID and find matching entry */ + /* Read ID and find matching entry */ id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2)); printk(KERN_DEBUG "PHY ID: %x, addr: %x\n", id, mii_id); for (i=0; (def = mii_phy_table[i]) != NULL; i++) @@ -935,7 +935,7 @@ int mii_phy_probe(struct mii_phy *phy, int mii_id) goto fail; phy->def = def; - + return 0; fail: phy->speed = 0; |