smsc: Move the SMC (SMSC) drivers

Moves the SMC (SMSC) drivers into drivers/net/ethernet/smsc/ and the
necessary Kconfig and Makefile changes.  Also did some cleanup
of NET_VENDOR_SMC Kconfig tag for the 8390 based drivers.

CC: Nicolas Pitre <nico@fluxnic.net>
CC: Donald Becker <becker@scyld.com>
CC: Erik Stahlman <erik@vt.edu>
CC: Dustin McIntire <dustin@sensoria.com>
CC: Steve Glendinning <steve.glendinning@smsc.com>
CC: David Hinds <dahinds@users.sourceforge.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 2431 deletions

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
deleted file mode 100644
index 2b1d254d59af..000000000000
--- a/drivers/net/smc91x.c
+++ /dev/null
@@ -1,2431 +0,0 @@
-/*
- * smc91x.c
- * This is a driver for SMSC's 91C9x/91C1xx single-chip Ethernet devices.
- *
- * Copyright (C) 1996 by Erik Stahlman
- * Copyright (C) 2001 Standard Microsystems Corporation
- *	Developed by Simple Network Magic Corporation
- * Copyright (C) 2003 Monta Vista Software, Inc.
- *	Unified SMC91x driver by Nicolas Pitre
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Arguments:
- * 	io	= for the base address
- *	irq	= for the IRQ
- *	nowait	= 0 for normal wait states, 1 eliminates additional wait states
- *
- * original author:
- * 	Erik Stahlman <erik@vt.edu>
- *
- * hardware multicast code:
- *    Peter Cammaert <pc@denkart.be>
- *
- * contributors:
- * 	Daris A Nevil <dnevil@snmc.com>
- *      Nicolas Pitre <nico@fluxnic.net>
- *	Russell King <rmk@arm.linux.org.uk>
- *
- * History:
- *   08/20/00  Arnaldo Melo       fix kfree(skb) in smc_hardware_send_packet
- *   12/15/00  Christian Jullien  fix "Warning: kfree_skb on hard IRQ"
- *   03/16/01  Daris A Nevil      modified smc9194.c for use with LAN91C111
- *   08/22/01  Scott Anderson     merge changes from smc9194 to smc91111
- *   08/21/01  Pramod B Bhardwaj  added support for RevB of LAN91C111
- *   12/20/01  Jeff Sutherland    initial port to Xscale PXA with DMA support
- *   04/07/03  Nicolas Pitre      unified SMC91x driver, killed irq races,
- *                                more bus abstraction, big cleanup, etc.
- *   29/09/03  Russell King       - add driver model support
- *                                - ethtool support
- *                                - convert to use generic MII interface
- *                                - add link up/down notification
- *                                - don't try to handle full negotiation in
- *                                  smc_phy_configure
- *                                - clean up (and fix stack overrun) in PHY
- *                                  MII read/write functions
- *   22/09/04  Nicolas Pitre      big update (see commit log for details)
- */
-static const char version[] =
-	"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>\n";
-
-/* Debugging level */
-#ifndef SMC_DEBUG
-#define SMC_DEBUG		0
-#endif
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/workqueue.h>
-#include <linux/of.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <asm/io.h>
-
-#include "smc91x.h"
-
-#ifndef SMC_NOWAIT
-# define SMC_NOWAIT		0
-#endif
-static int nowait = SMC_NOWAIT;
-module_param(nowait, int, 0400);
-MODULE_PARM_DESC(nowait, "set to 1 for no wait state");
-
-/*
- * Transmit timeout, default 5 seconds.
- */
-static int watchdog = 1000;
-module_param(watchdog, int, 0400);
-MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:smc91x");
-
-/*
- * The internal workings of the driver.  If you are changing anything
- * here with the SMC stuff, you should have the datasheet and know
- * what you are doing.
- */
-#define CARDNAME "smc91x"
-
-/*
- * Use power-down feature of the chip
- */
-#define POWER_DOWN		1
-
-/*
- * Wait time for memory to be free.  This probably shouldn't be
- * tuned that much, as waiting for this means nothing else happens
- * in the system
- */
-#define MEMORY_WAIT_TIME	16
-
-/*
- * The maximum number of processing loops allowed for each call to the
- * IRQ handler.
- */
-#define MAX_IRQ_LOOPS		8
-
-/*
- * This selects whether TX packets are sent one by one to the SMC91x internal
- * memory and throttled until transmission completes.  This may prevent
- * RX overruns a litle by keeping much of the memory free for RX packets
- * but to the expense of reduced TX throughput and increased IRQ overhead.
- * Note this is not a cure for a too slow data bus or too high IRQ latency.
- */
-#define THROTTLE_TX_PKTS	0
-
-/*
- * The MII clock high/low times.  2x this number gives the MII clock period
- * in microseconds. (was 50, but this gives 6.4ms for each MII transaction!)
- */
-#define MII_DELAY		1
-
-#if SMC_DEBUG > 0
-#define DBG(n, args...)					\
-	do {						\
-		if (SMC_DEBUG >= (n))			\
-			printk(args);	\
-	} while (0)
-
-#define PRINTK(args...)   printk(args)
-#else
-#define DBG(n, args...)   do { } while(0)
-#define PRINTK(args...)   printk(KERN_DEBUG args)
-#endif
-
-#if SMC_DEBUG > 3
-static void PRINT_PKT(u_char *buf, int length)
-{
-	int i;
-	int remainder;
-	int lines;
-
-	lines = length / 16;
-	remainder = length % 16;
-
-	for (i = 0; i < lines ; i ++) {
-		int cur;
-		for (cur = 0; cur < 8; cur++) {
-			u_char a, b;
-			a = *buf++;
-			b = *buf++;
-			printk("%02x%02x ", a, b);
-		}
-		printk("\n");
-	}
-	for (i = 0; i < remainder/2 ; i++) {
-		u_char a, b;
-		a = *buf++;
-		b = *buf++;
-		printk("%02x%02x ", a, b);
-	}
-	printk("\n");
-}
-#else
-#define PRINT_PKT(x...)  do { } while(0)
-#endif
-
-
-/* this enables an interrupt in the interrupt mask register */
-#define SMC_ENABLE_INT(lp, x) do {					\
-	unsigned char mask;						\
-	unsigned long smc_enable_flags;					\
-	spin_lock_irqsave(&lp->lock, smc_enable_flags);			\
-	mask = SMC_GET_INT_MASK(lp);					\
-	mask |= (x);							\
-	SMC_SET_INT_MASK(lp, mask);					\
-	spin_unlock_irqrestore(&lp->lock, smc_enable_flags);		\
-} while (0)
-
-/* this disables an interrupt from the interrupt mask register */
-#define SMC_DISABLE_INT(lp, x) do {					\
-	unsigned char mask;						\
-	unsigned long smc_disable_flags;				\
-	spin_lock_irqsave(&lp->lock, smc_disable_flags);		\
-	mask = SMC_GET_INT_MASK(lp);					\
-	mask &= ~(x);							\
-	SMC_SET_INT_MASK(lp, mask);					\
-	spin_unlock_irqrestore(&lp->lock, smc_disable_flags);		\
-} while (0)
-
-/*
- * Wait while MMU is busy.  This is usually in the order of a few nanosecs
- * if at all, but let's avoid deadlocking the system if the hardware
- * decides to go south.
- */
-#define SMC_WAIT_MMU_BUSY(lp) do {					\
-	if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) {		\
-		unsigned long timeout = jiffies + 2;			\
-		while (SMC_GET_MMU_CMD(lp) & MC_BUSY) {		\
-			if (time_after(jiffies, timeout)) {		\
-				printk("%s: timeout %s line %d\n",	\
-					dev->name, __FILE__, __LINE__);	\
-				break;					\
-			}						\
-			cpu_relax();					\
-		}							\
-	}								\
-} while (0)
-
-
-/*
- * this does a soft reset on the device
- */
-static void smc_reset(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int ctl, cfg;
-	struct sk_buff *pending_skb;
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	/* Disable all interrupts, block TX tasklet */
-	spin_lock_irq(&lp->lock);
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_INT_MASK(lp, 0);
-	pending_skb = lp->pending_tx_skb;
-	lp->pending_tx_skb = NULL;
-	spin_unlock_irq(&lp->lock);
-
-	/* free any pending tx skb */
-	if (pending_skb) {
-		dev_kfree_skb(pending_skb);
-		dev->stats.tx_errors++;
-		dev->stats.tx_aborted_errors++;
-	}
-
-	/*
-	 * This resets the registers mostly to defaults, but doesn't
-	 * affect EEPROM.  That seems unnecessary
-	 */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_RCR(lp, RCR_SOFTRST);
-
-	/*
-	 * Setup the Configuration Register
-	 * This is necessary because the CONFIG_REG is not affected
-	 * by a soft reset
-	 */
-	SMC_SELECT_BANK(lp, 1);
-
-	cfg = CONFIG_DEFAULT;
-
-	/*
-	 * Setup for fast accesses if requested.  If the card/system
-	 * can't handle it then there will be no recovery except for
-	 * a hard reset or power cycle
-	 */
-	if (lp->cfg.flags & SMC91X_NOWAIT)
-		cfg |= CONFIG_NO_WAIT;
-
-	/*
-	 * Release from possible power-down state
-	 * Configuration register is not affected by Soft Reset
-	 */
-	cfg |= CONFIG_EPH_POWER_EN;
-
-	SMC_SET_CONFIG(lp, cfg);
-
-	/* this should pause enough for the chip to be happy */
-	/*
-	 * elaborate?  What does the chip _need_? --jgarzik
-	 *
-	 * This seems to be undocumented, but something the original
-	 * driver(s) have always done.  Suspect undocumented timing
-	 * info/determined empirically. --rmk
-	 */
-	udelay(1);
-
-	/* Disable transmit and receive functionality */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_RCR(lp, RCR_CLEAR);
-	SMC_SET_TCR(lp, TCR_CLEAR);
-
-	SMC_SELECT_BANK(lp, 1);
-	ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE;
-
-	/*
-	 * Set the control register to automatically release successfully
-	 * transmitted packets, to make the best use out of our limited
-	 * memory
-	 */
-	if(!THROTTLE_TX_PKTS)
-		ctl |= CTL_AUTO_RELEASE;
-	else
-		ctl &= ~CTL_AUTO_RELEASE;
-	SMC_SET_CTL(lp, ctl);
-
-	/* Reset the MMU */
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_MMU_CMD(lp, MC_RESET);
-	SMC_WAIT_MMU_BUSY(lp);
-}
-
-/*
- * Enable Interrupts, Receive, and Transmit
- */
-static void smc_enable(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	int mask;
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	/* see the header file for options in TCR/RCR DEFAULT */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_TCR(lp, lp->tcr_cur_mode);
-	SMC_SET_RCR(lp, lp->rcr_cur_mode);
-
-	SMC_SELECT_BANK(lp, 1);
-	SMC_SET_MAC_ADDR(lp, dev->dev_addr);
-
-	/* now, enable interrupts */
-	mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT;
-	if (lp->version >= (CHIP_91100 << 4))
-		mask |= IM_MDINT;
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_INT_MASK(lp, mask);
-
-	/*
-	 * From this point the register bank must _NOT_ be switched away
-	 * to something else than bank 2 without proper locking against
-	 * races with any tasklet or interrupt handlers until smc_shutdown()
-	 * or smc_reset() is called.
-	 */
-}
-
-/*
- * this puts the device in an inactive state
- */
-static void smc_shutdown(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	struct sk_buff *pending_skb;
-
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
-
-	/* no more interrupts for me */
-	spin_lock_irq(&lp->lock);
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_INT_MASK(lp, 0);
-	pending_skb = lp->pending_tx_skb;
-	lp->pending_tx_skb = NULL;
-	spin_unlock_irq(&lp->lock);
-	if (pending_skb)
-		dev_kfree_skb(pending_skb);
-
-	/* and tell the card to stay away from that nasty outside world */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_RCR(lp, RCR_CLEAR);
-	SMC_SET_TCR(lp, TCR_CLEAR);
-
-#ifdef POWER_DOWN
-	/* finally, shut the chip down */
-	SMC_SELECT_BANK(lp, 1);
-	SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN);
-#endif
-}
-
-/*
- * This is the procedure to handle the receipt of a packet.
- */
-static inline void  smc_rcv(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int packet_number, status, packet_len;
-
-	DBG(3, "%s: %s\n", dev->name, __func__);
-
-	packet_number = SMC_GET_RXFIFO(lp);
-	if (unlikely(packet_number & RXFIFO_REMPTY)) {
-		PRINTK("%s: smc_rcv with nothing on FIFO.\n", dev->name);
-		return;
-	}
-
-	/* read from start of packet */
-	SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC);
-
-	/* First two words are status and packet length */
-	SMC_GET_PKT_HDR(lp, status, packet_len);
-	packet_len &= 0x07ff;  /* mask off top bits */
-	DBG(2, "%s: RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
-		dev->name, packet_number, status,
-		packet_len, packet_len);
-
-	back:
-	if (unlikely(packet_len < 6 || status & RS_ERRORS)) {
-		if (status & RS_TOOLONG && packet_len <= (1514 + 4 + 6)) {
-			/* accept VLAN packets */
-			status &= ~RS_TOOLONG;
-			goto back;
-		}
-		if (packet_len < 6) {
-			/* bloody hardware */
-			printk(KERN_ERR "%s: fubar (rxlen %u status %x\n",
-					dev->name, packet_len, status);
-			status |= RS_TOOSHORT;
-		}
-		SMC_WAIT_MMU_BUSY(lp);
-		SMC_SET_MMU_CMD(lp, MC_RELEASE);
-		dev->stats.rx_errors++;
-		if (status & RS_ALGNERR)
-			dev->stats.rx_frame_errors++;
-		if (status & (RS_TOOSHORT | RS_TOOLONG))
-			dev->stats.rx_length_errors++;
-		if (status & RS_BADCRC)
-			dev->stats.rx_crc_errors++;
-	} else {
-		struct sk_buff *skb;
-		unsigned char *data;
-		unsigned int data_len;
-
-		/* set multicast stats */
-		if (status & RS_MULTICAST)
-			dev->stats.multicast++;
-
-		/*
-		 * Actual payload is packet_len - 6 (or 5 if odd byte).
-		 * We want skb_reserve(2) and the final ctrl word
-		 * (2 bytes, possibly containing the payload odd byte).
-		 * Furthermore, we add 2 bytes to allow rounding up to
-		 * multiple of 4 bytes on 32 bit buses.
-		 * Hence packet_len - 6 + 2 + 2 + 2.
-		 */
-		skb = dev_alloc_skb(packet_len);
-		if (unlikely(skb == NULL)) {
-			printk(KERN_NOTICE "%s: Low memory, packet dropped.\n",
-				dev->name);
-			SMC_WAIT_MMU_BUSY(lp);
-			SMC_SET_MMU_CMD(lp, MC_RELEASE);
-			dev->stats.rx_dropped++;
-			return;
-		}
-
-		/* Align IP header to 32 bits */
-		skb_reserve(skb, 2);
-
-		/* BUG: the LAN91C111 rev A never sets this bit. Force it. */
-		if (lp->version == 0x90)
-			status |= RS_ODDFRAME;
-
-		/*
-		 * If odd length: packet_len - 5,
-		 * otherwise packet_len - 6.
-		 * With the trailing ctrl byte it's packet_len - 4.
-		 */
-		data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6);
-		data = skb_put(skb, data_len);
-		SMC_PULL_DATA(lp, data, packet_len - 4);
-
-		SMC_WAIT_MMU_BUSY(lp);
-		SMC_SET_MMU_CMD(lp, MC_RELEASE);
-
-		PRINT_PKT(data, packet_len - 4);
-
-		skb->protocol = eth_type_trans(skb, dev);
-		netif_rx(skb);
-		dev->stats.rx_packets++;
-		dev->stats.rx_bytes += data_len;
-	}
-}
-
-#ifdef CONFIG_SMP
-/*
- * On SMP we have the following problem:
- *
- * 	A = smc_hardware_send_pkt()
- * 	B = smc_hard_start_xmit()
- * 	C = smc_interrupt()
- *
- * A and B can never be executed simultaneously.  However, at least on UP,
- * it is possible (and even desirable) for C to interrupt execution of
- * A or B in order to have better RX reliability and avoid overruns.
- * C, just like A and B, must have exclusive access to the chip and
- * each of them must lock against any other concurrent access.
- * Unfortunately this is not possible to have C suspend execution of A or
- * B taking place on another CPU. On UP this is no an issue since A and B
- * are run from softirq context and C from hard IRQ context, and there is
- * no other CPU where concurrent access can happen.
- * If ever there is a way to force at least B and C to always be executed
- * on the same CPU then we could use read/write locks to protect against
- * any other concurrent access and C would always interrupt B. But life
- * isn't that easy in a SMP world...
- */
-#define smc_special_trylock(lock, flags)				\
-({									\
-	int __ret;							\
-	local_irq_save(flags);						\
-	__ret = spin_trylock(lock);					\
-	if (!__ret)							\
-		local_irq_restore(flags);				\
-	__ret;								\
-})
-#define smc_special_lock(lock, flags)		spin_lock_irqsave(lock, flags)
-#define smc_special_unlock(lock, flags) 	spin_unlock_irqrestore(lock, flags)
-#else
-#define smc_special_trylock(lock, flags)	(flags == flags)
-#define smc_special_lock(lock, flags)   	do { flags = 0; } while (0)
-#define smc_special_unlock(lock, flags)	do { flags = 0; } while (0)
-#endif
-
-/*
- * This is called to actually send a packet to the chip.
- */
-static void smc_hardware_send_pkt(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *)data;
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	struct sk_buff *skb;
-	unsigned int packet_no, len;
-	unsigned char *buf;
-	unsigned long flags;
-
-	DBG(3, "%s: %s\n", dev->name, __func__);
-
-	if (!smc_special_trylock(&lp->lock, flags)) {
-		netif_stop_queue(dev);
-		tasklet_schedule(&lp->tx_task);
-		return;
-	}
-
-	skb = lp->pending_tx_skb;
-	if (unlikely(!skb)) {
-		smc_special_unlock(&lp->lock, flags);
-		return;
-	}
-	lp->pending_tx_skb = NULL;
-
-	packet_no = SMC_GET_AR(lp);
-	if (unlikely(packet_no & AR_FAILED)) {
-		printk("%s: Memory allocation failed.\n", dev->name);
-		dev->stats.tx_errors++;
-		dev->stats.tx_fifo_errors++;
-		smc_special_unlock(&lp->lock, flags);
-		goto done;
-	}
-
-	/* point to the beginning of the packet */
-	SMC_SET_PN(lp, packet_no);
-	SMC_SET_PTR(lp, PTR_AUTOINC);
-
-	buf = skb->data;
-	len = skb->len;
-	DBG(2, "%s: TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
-		dev->name, packet_no, len, len, buf);
-	PRINT_PKT(buf, len);
-
-	/*
-	 * Send the packet length (+6 for status words, length, and ctl.
-	 * The card will pad to 64 bytes with zeroes if packet is too small.
-	 */
-	SMC_PUT_PKT_HDR(lp, 0, len + 6);
-
-	/* send the actual data */
-	SMC_PUSH_DATA(lp, buf, len & ~1);
-
-	/* Send final ctl word with the last byte if there is one */
-	SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
-
-	/*
-	 * If THROTTLE_TX_PKTS is set, we stop the queue here. This will
-	 * have the effect of having at most one packet queued for TX
-	 * in the chip's memory at all time.
-	 *
-	 * If THROTTLE_TX_PKTS is not set then the queue is stopped only
-	 * when memory allocation (MC_ALLOC) does not succeed right away.
-	 */
-	if (THROTTLE_TX_PKTS)
-		netif_stop_queue(dev);
-
-	/* queue the packet for TX */
-	SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
-	smc_special_unlock(&lp->lock, flags);
-
-	dev->trans_start = jiffies;
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += len;
-
-	SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT);
-
-done:	if (!THROTTLE_TX_PKTS)
-		netif_wake_queue(dev);
-
-	dev_kfree_skb(skb);
-}
-
-/*
- * Since I am not sure if I will have enough room in the chip's ram
- * to store the packet, I call this routine which either sends it
- * now, or set the card to generates an interrupt when ready
- * for the packet.
- */
-static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int numPages, poll_count, status;
-	unsigned long flags;
-
-	DBG(3, "%s: %s\n", dev->name, __func__);
-
-	BUG_ON(lp->pending_tx_skb != NULL);
-
-	/*
-	 * The MMU wants the number of pages to be the number of 256 bytes
-	 * 'pages', minus 1 (since a packet can't ever have 0 pages :))
-	 *
-	 * The 91C111 ignores the size bits, but earlier models don't.
-	 *
-	 * Pkt size for allocating is data length +6 (for additional status
-	 * words, length and ctl)
-	 *
-	 * If odd size then last byte is included in ctl word.
-	 */
-	numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
-	if (unlikely(numPages > 7)) {
-		printk("%s: Far too big packet error.\n", dev->name);
-		dev->stats.tx_errors++;
-		dev->stats.tx_dropped++;
-		dev_kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-
-	smc_special_lock(&lp->lock, flags);
-
-	/* now, try to allocate the memory */
-	SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
-
-	/*
-	 * Poll the chip for a short amount of time in case the
-	 * allocation succeeds quickly.
-	 */
-	poll_count = MEMORY_WAIT_TIME;
-	do {
-		status = SMC_GET_INT(lp);
-		if (status & IM_ALLOC_INT) {
-			SMC_ACK_INT(lp, IM_ALLOC_INT);
-  			break;
-		}
-   	} while (--poll_count);
-
-	smc_special_unlock(&lp->lock, flags);
-
-	lp->pending_tx_skb = skb;
-   	if (!poll_count) {
-		/* oh well, wait until the chip finds memory later */
-		netif_stop_queue(dev);
-		DBG(2, "%s: TX memory allocation deferred.\n", dev->name);
-		SMC_ENABLE_INT(lp, IM_ALLOC_INT);
-   	} else {
-		/*
-		 * Allocation succeeded: push packet to the chip's own memory
-		 * immediately.
-		 */
-		smc_hardware_send_pkt((unsigned long)dev);
-	}
-
-	return NETDEV_TX_OK;
-}
-
-/*
- * This handles a TX interrupt, which is only called when:
- * - a TX error occurred, or
- * - CTL_AUTO_RELEASE is not set and TX of a packet completed.
- */
-static void smc_tx(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int saved_packet, packet_no, tx_status, pkt_len;
-
-	DBG(3, "%s: %s\n", dev->name, __func__);
-
-	/* If the TX FIFO is empty then nothing to do */
-	packet_no = SMC_GET_TXFIFO(lp);
-	if (unlikely(packet_no & TXFIFO_TEMPTY)) {
-		PRINTK("%s: smc_tx with nothing on FIFO.\n", dev->name);
-		return;
-	}
-
-	/* select packet to read from */
-	saved_packet = SMC_GET_PN(lp);
-	SMC_SET_PN(lp, packet_no);
-
-	/* read the first word (status word) from this packet */
-	SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
-	SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
-	DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n",
-		dev->name, tx_status, packet_no);
-
-	if (!(tx_status & ES_TX_SUC))
-		dev->stats.tx_errors++;
-
-	if (tx_status & ES_LOSTCARR)
-		dev->stats.tx_carrier_errors++;
-
-	if (tx_status & (ES_LATCOL | ES_16COL)) {
-		PRINTK("%s: %s occurred on last xmit\n", dev->name,
-		       (tx_status & ES_LATCOL) ?
-			"late collision" : "too many collisions");
-		dev->stats.tx_window_errors++;
-		if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) {
-			printk(KERN_INFO "%s: unexpectedly large number of "
-			       "bad collisions. Please check duplex "
-			       "setting.\n", dev->name);
-		}
-	}
-
-	/* kill the packet */
-	SMC_WAIT_MMU_BUSY(lp);
-	SMC_SET_MMU_CMD(lp, MC_FREEPKT);
-
-	/* Don't restore Packet Number Reg until busy bit is cleared */
-	SMC_WAIT_MMU_BUSY(lp);
-	SMC_SET_PN(lp, saved_packet);
-
-	/* re-enable transmit */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_TCR(lp, lp->tcr_cur_mode);
-	SMC_SELECT_BANK(lp, 2);
-}
-
-
-/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
-
-static void smc_mii_out(struct net_device *dev, unsigned int val, int bits)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int mii_reg, mask;
-
-	mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
-	mii_reg |= MII_MDOE;
-
-	for (mask = 1 << (bits - 1); mask; mask >>= 1) {
-		if (val & mask)
-			mii_reg |= MII_MDO;
-		else
-			mii_reg &= ~MII_MDO;
-
-		SMC_SET_MII(lp, mii_reg);
-		udelay(MII_DELAY);
-		SMC_SET_MII(lp, mii_reg | MII_MCLK);
-		udelay(MII_DELAY);
-	}
-}
-
-static unsigned int smc_mii_in(struct net_device *dev, int bits)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int mii_reg, mask, val;
-
-	mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
-	SMC_SET_MII(lp, mii_reg);
-
-	for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) {
-		if (SMC_GET_MII(lp) & MII_MDI)
-			val |= mask;
-
-		SMC_SET_MII(lp, mii_reg);
-		udelay(MII_DELAY);
-		SMC_SET_MII(lp, mii_reg | MII_MCLK);
-		udelay(MII_DELAY);
-	}
-
-	return val;
-}
-
-/*
- * Reads a register from the MII Management serial interface
- */
-static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int phydata;
-
-	SMC_SELECT_BANK(lp, 3);
-
-	/* Idle - 32 ones */
-	smc_mii_out(dev, 0xffffffff, 32);
-
-	/* Start code (01) + read (10) + phyaddr + phyreg */
-	smc_mii_out(dev, 6 << 10 | phyaddr << 5 | phyreg, 14);
-
-	/* Turnaround (2bits) + phydata */
-	phydata = smc_mii_in(dev, 18);
-
-	/* Return to idle state */
-	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
-
-	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
-
-	SMC_SELECT_BANK(lp, 2);
-	return phydata;
-}
-
-/*
- * Writes a register to the MII Management serial interface
- */
-static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
-			  int phydata)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-
-	SMC_SELECT_BANK(lp, 3);
-
-	/* Idle - 32 ones */
-	smc_mii_out(dev, 0xffffffff, 32);
-
-	/* Start code (01) + write (01) + phyaddr + phyreg + turnaround + phydata */
-	smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32);
-
-	/* Return to idle state */
-	SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
-
-	DBG(3, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
-		__func__, phyaddr, phyreg, phydata);
-
-	SMC_SELECT_BANK(lp, 2);
-}
-
-/*
- * Finds and reports the PHY address
- */
-static void smc_phy_detect(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	int phyaddr;
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	lp->phy_type = 0;
-
-	/*
-	 * Scan all 32 PHY addresses if necessary, starting at
-	 * PHY#1 to PHY#31, and then PHY#0 last.
-	 */
-	for (phyaddr = 1; phyaddr < 33; ++phyaddr) {
-		unsigned int id1, id2;
-
-		/* Read the PHY identifiers */
-		id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1);
-		id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2);
-
-		DBG(3, "%s: phy_id1=0x%x, phy_id2=0x%x\n",
-			dev->name, id1, id2);
-
-		/* Make sure it is a valid identifier */
-		if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 &&
-		    id2 != 0x0000 && id2 != 0xffff && id2 != 0x8000) {
-			/* Save the PHY's address */
-			lp->mii.phy_id = phyaddr & 31;
-			lp->phy_type = id1 << 16 | id2;
-			break;
-		}
-	}
-}
-
-/*
- * Sets the PHY to a configuration as determined by the user
- */
-static int smc_phy_fixed(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	int phyaddr = lp->mii.phy_id;
-	int bmcr, cfg1;
-
-	DBG(3, "%s: %s\n", dev->name, __func__);
-
-	/* Enter Link Disable state */
-	cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG);
-	cfg1 |= PHY_CFG1_LNKDIS;
-	smc_phy_write(dev, phyaddr, PHY_CFG1_REG, cfg1);
-
-	/*
-	 * Set our fixed capabilities
-	 * Disable auto-negotiation
-	 */
-	bmcr = 0;
-
-	if (lp->ctl_rfduplx)
-		bmcr |= BMCR_FULLDPLX;
-
-	if (lp->ctl_rspeed == 100)
-		bmcr |= BMCR_SPEED100;
-
-	/* Write our capabilities to the phy control register */
-	smc_phy_write(dev, phyaddr, MII_BMCR, bmcr);
-
-	/* Re-Configure the Receive/Phy Control register */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_RPC(lp, lp->rpc_cur_mode);
-	SMC_SELECT_BANK(lp, 2);
-
-	return 1;
-}
-
-/*
- * smc_phy_reset - reset the phy
- * @dev: net device
- * @phy: phy address
- *
- * Issue a software reset for the specified PHY and
- * wait up to 100ms for the reset to complete.  We should
- * not access the PHY for 50ms after issuing the reset.
- *
- * The time to wait appears to be dependent on the PHY.
- *
- * Must be called with lp->lock locked.
- */
-static int smc_phy_reset(struct net_device *dev, int phy)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	unsigned int bmcr;
-	int timeout;
-
-	smc_phy_write(dev, phy, MII_BMCR, BMCR_RESET);
-
-	for (timeout = 2; timeout; timeout--) {
-		spin_unlock_irq(&lp->lock);
-		msleep(50);
-		spin_lock_irq(&lp->lock);
-
-		bmcr = smc_phy_read(dev, phy, MII_BMCR);
-		if (!(bmcr & BMCR_RESET))
-			break;
-	}
-
-	return bmcr & BMCR_RESET;
-}
-
-/*
- * smc_phy_powerdown - powerdown phy
- * @dev: net device
- *
- * Power down the specified PHY
- */
-static void smc_phy_powerdown(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	unsigned int bmcr;
-	int phy = lp->mii.phy_id;
-
-	if (lp->phy_type == 0)
-		return;
-
-	/* We need to ensure that no calls to smc_phy_configure are
-	   pending.
-	*/
-	cancel_work_sync(&lp->phy_configure);
-
-	bmcr = smc_phy_read(dev, phy, MII_BMCR);
-	smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
-}
-
-/*
- * smc_phy_check_media - check the media status and adjust TCR
- * @dev: net device
- * @init: set true for initialisation
- *
- * Select duplex mode depending on negotiation state.  This
- * also updates our carrier state.
- */
-static void smc_phy_check_media(struct net_device *dev, int init)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-
-	if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
-		/* duplex state has changed */
-		if (lp->mii.full_duplex) {
-			lp->tcr_cur_mode |= TCR_SWFDUP;
-		} else {
-			lp->tcr_cur_mode &= ~TCR_SWFDUP;
-		}
-
-		SMC_SELECT_BANK(lp, 0);
-		SMC_SET_TCR(lp, lp->tcr_cur_mode);
-	}
-}
-
-/*
- * Configures the specified PHY through the MII management interface
- * using Autonegotiation.
- * Calls smc_phy_fixed() if the user has requested a certain config.
- * If RPC ANEG bit is set, the media selection is dependent purely on
- * the selection by the MII (either in the MII BMCR reg or the result
- * of autonegotiation.)  If the RPC ANEG bit is cleared, the selection
- * is controlled by the RPC SPEED and RPC DPLX bits.
- */
-static void smc_phy_configure(struct work_struct *work)
-{
-	struct smc_local *lp =
-		container_of(work, struct smc_local, phy_configure);
-	struct net_device *dev = lp->dev;
-	void __iomem *ioaddr = lp->base;
-	int phyaddr = lp->mii.phy_id;
-	int my_phy_caps; /* My PHY capabilities */
-	int my_ad_caps; /* My Advertised capabilities */
-	int status;
-
-	DBG(3, "%s:smc_program_phy()\n", dev->name);
-
-	spin_lock_irq(&lp->lock);
-
-	/*
-	 * We should not be called if phy_type is zero.
-	 */
-	if (lp->phy_type == 0)
-		goto smc_phy_configure_exit;
-
-	if (smc_phy_reset(dev, phyaddr)) {
-		printk("%s: PHY reset timed out\n", dev->name);
-		goto smc_phy_configure_exit;
-	}
-
-	/*
-	 * Enable PHY Interrupts (for register 18)
-	 * Interrupts listed here are disabled
-	 */
-	smc_phy_write(dev, phyaddr, PHY_MASK_REG,
-		PHY_INT_LOSSSYNC | PHY_INT_CWRD | PHY_INT_SSD |
-		PHY_INT_ESD | PHY_INT_RPOL | PHY_INT_JAB |
-		PHY_INT_SPDDET | PHY_INT_DPLXDET);
-
-	/* Configure the Receive/Phy Control register */
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_RPC(lp, lp->rpc_cur_mode);
-
-	/* If the user requested no auto neg, then go set his request */
-	if (lp->mii.force_media) {
-		smc_phy_fixed(dev);
-		goto smc_phy_configure_exit;
-	}
-
-	/* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
-	my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
-
-	if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
-		printk(KERN_INFO "Auto negotiation NOT supported\n");
-		smc_phy_fixed(dev);
-		goto smc_phy_configure_exit;
-	}
-
-	my_ad_caps = ADVERTISE_CSMA; /* I am CSMA capable */
-
-	if (my_phy_caps & BMSR_100BASE4)
-		my_ad_caps |= ADVERTISE_100BASE4;
-	if (my_phy_caps & BMSR_100FULL)
-		my_ad_caps |= ADVERTISE_100FULL;
-	if (my_phy_caps & BMSR_100HALF)
-		my_ad_caps |= ADVERTISE_100HALF;
-	if (my_phy_caps & BMSR_10FULL)
-		my_ad_caps |= ADVERTISE_10FULL;
-	if (my_phy_caps & BMSR_10HALF)
-		my_ad_caps |= ADVERTISE_10HALF;
-
-	/* Disable capabilities not selected by our user */
-	if (lp->ctl_rspeed != 100)
-		my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
-
-	if (!lp->ctl_rfduplx)
-		my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
-
-	/* Update our Auto-Neg Advertisement Register */
-	smc_phy_write(dev, phyaddr, MII_ADVERTISE, my_ad_caps);
-	lp->mii.advertising = my_ad_caps;
-
-	/*
-	 * Read the register back.  Without this, it appears that when
-	 * auto-negotiation is restarted, sometimes it isn't ready and
-	 * the link does not come up.
-	 */
-	status = smc_phy_read(dev, phyaddr, MII_ADVERTISE);
-
-	DBG(2, "%s: phy caps=%x\n", dev->name, my_phy_caps);
-	DBG(2, "%s: phy advertised caps=%x\n", dev->name, my_ad_caps);
-
-	/* Restart auto-negotiation process in order to advertise my caps */
-	smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
-
-	smc_phy_check_media(dev, 1);
-
-smc_phy_configure_exit:
-	SMC_SELECT_BANK(lp, 2);
-	spin_unlock_irq(&lp->lock);
-}
-
-/*
- * smc_phy_interrupt
- *
- * Purpose:  Handle interrupts relating to PHY register 18. This is
- *  called from the "hard" interrupt handler under our private spinlock.
- */
-static void smc_phy_interrupt(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	int phyaddr = lp->mii.phy_id;
-	int phy18;
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	if (lp->phy_type == 0)
-		return;
-
-	for(;;) {
-		smc_phy_check_media(dev, 0);
-
-		/* Read PHY Register 18, Status Output */
-		phy18 = smc_phy_read(dev, phyaddr, PHY_INT_REG);
-		if ((phy18 & PHY_INT_INT) == 0)
-			break;
-	}
-}
-
-/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
-
-static void smc_10bt_check_media(struct net_device *dev, int init)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int old_carrier, new_carrier;
-
-	old_carrier = netif_carrier_ok(dev) ? 1 : 0;
-
-	SMC_SELECT_BANK(lp, 0);
-	new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0;
-	SMC_SELECT_BANK(lp, 2);
-
-	if (init || (old_carrier != new_carrier)) {
-		if (!new_carrier) {
-			netif_carrier_off(dev);
-		} else {
-			netif_carrier_on(dev);
-		}
-		if (netif_msg_link(lp))
-			printk(KERN_INFO "%s: link %s\n", dev->name,
-			       new_carrier ? "up" : "down");
-	}
-}
-
-static void smc_eph_interrupt(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned int ctl;
-
-	smc_10bt_check_media(dev, 0);
-
-	SMC_SELECT_BANK(lp, 1);
-	ctl = SMC_GET_CTL(lp);
-	SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE);
-	SMC_SET_CTL(lp, ctl);
-	SMC_SELECT_BANK(lp, 2);
-}
-
-/*
- * This is the main routine of the driver, to handle the device when
- * it needs some attention.
- */
-static irqreturn_t smc_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	int status, mask, timeout, card_stats;
-	int saved_pointer;
-
-	DBG(3, "%s: %s\n", dev->name, __func__);
-
-	spin_lock(&lp->lock);
-
-	/* A preamble may be used when there is a potential race
-	 * between the interruptible transmit functions and this
-	 * ISR. */
-	SMC_INTERRUPT_PREAMBLE;
-
-	saved_pointer = SMC_GET_PTR(lp);
-	mask = SMC_GET_INT_MASK(lp);
-	SMC_SET_INT_MASK(lp, 0);
-
-	/* set a timeout value, so I don't stay here forever */
-	timeout = MAX_IRQ_LOOPS;
-
-	do {
-		status = SMC_GET_INT(lp);
-
-		DBG(2, "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
-			dev->name, status, mask,
-			({ int meminfo; SMC_SELECT_BANK(lp, 0);
-			   meminfo = SMC_GET_MIR(lp);
-			   SMC_SELECT_BANK(lp, 2); meminfo; }),
-			SMC_GET_FIFO(lp));
-
-		status &= mask;
-		if (!status)
-			break;
-
-		if (status & IM_TX_INT) {
-			/* do this before RX as it will free memory quickly */
-			DBG(3, "%s: TX int\n", dev->name);
-			smc_tx(dev);
-			SMC_ACK_INT(lp, IM_TX_INT);
-			if (THROTTLE_TX_PKTS)
-				netif_wake_queue(dev);
-		} else if (status & IM_RCV_INT) {
-			DBG(3, "%s: RX irq\n", dev->name);
-			smc_rcv(dev);
-		} else if (status & IM_ALLOC_INT) {
-			DBG(3, "%s: Allocation irq\n", dev->name);
-			tasklet_hi_schedule(&lp->tx_task);
-			mask &= ~IM_ALLOC_INT;
-		} else if (status & IM_TX_EMPTY_INT) {
-			DBG(3, "%s: TX empty\n", dev->name);
-			mask &= ~IM_TX_EMPTY_INT;
-
-			/* update stats */
-			SMC_SELECT_BANK(lp, 0);
-			card_stats = SMC_GET_COUNTER(lp);
-			SMC_SELECT_BANK(lp, 2);
-
-			/* single collisions */
-			dev->stats.collisions += card_stats & 0xF;
-			card_stats >>= 4;
-
-			/* multiple collisions */
-			dev->stats.collisions += card_stats & 0xF;
-		} else if (status & IM_RX_OVRN_INT) {
-			DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name,
-			       ({ int eph_st; SMC_SELECT_BANK(lp, 0);
-				  eph_st = SMC_GET_EPH_STATUS(lp);
-				  SMC_SELECT_BANK(lp, 2); eph_st; }));
-			SMC_ACK_INT(lp, IM_RX_OVRN_INT);
-			dev->stats.rx_errors++;
-			dev->stats.rx_fifo_errors++;
-		} else if (status & IM_EPH_INT) {
-			smc_eph_interrupt(dev);
-		} else if (status & IM_MDINT) {
-			SMC_ACK_INT(lp, IM_MDINT);
-			smc_phy_interrupt(dev);
-		} else if (status & IM_ERCV_INT) {
-			SMC_ACK_INT(lp, IM_ERCV_INT);
-			PRINTK("%s: UNSUPPORTED: ERCV INTERRUPT\n", dev->name);
-		}
-	} while (--timeout);
-
-	/* restore register states */
-	SMC_SET_PTR(lp, saved_pointer);
-	SMC_SET_INT_MASK(lp, mask);
-	spin_unlock(&lp->lock);
-
-#ifndef CONFIG_NET_POLL_CONTROLLER
-	if (timeout == MAX_IRQ_LOOPS)
-		PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
-		       dev->name, mask);
-#endif
-	DBG(3, "%s: Interrupt done (%d loops)\n",
-	       dev->name, MAX_IRQ_LOOPS - timeout);
-
-	/*
-	 * We return IRQ_HANDLED unconditionally here even if there was
-	 * nothing to do.  There is a possibility that a packet might
-	 * get enqueued into the chip right after TX_EMPTY_INT is raised
-	 * but just before the CPU acknowledges the IRQ.
-	 * Better take an unneeded IRQ in some occasions than complexifying
-	 * the code for all cases.
-	 */
-	return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling receive - used by netconsole and other diagnostic tools
- * to allow network i/o with interrupts disabled.
- */
-static void smc_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	smc_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-/* Our watchdog timed out. Called by the networking layer */
-static void smc_timeout(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	int status, mask, eph_st, meminfo, fifo;
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	spin_lock_irq(&lp->lock);
-	status = SMC_GET_INT(lp);
-	mask = SMC_GET_INT_MASK(lp);
-	fifo = SMC_GET_FIFO(lp);
-	SMC_SELECT_BANK(lp, 0);
-	eph_st = SMC_GET_EPH_STATUS(lp);
-	meminfo = SMC_GET_MIR(lp);
-	SMC_SELECT_BANK(lp, 2);
-	spin_unlock_irq(&lp->lock);
-	PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x "
-		"MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
-		dev->name, status, mask, meminfo, fifo, eph_st );
-
-	smc_reset(dev);
-	smc_enable(dev);
-
-	/*
-	 * Reconfiguring the PHY doesn't seem like a bad idea here, but
-	 * smc_phy_configure() calls msleep() which calls schedule_timeout()
-	 * which calls schedule().  Hence we use a work queue.
-	 */
-	if (lp->phy_type != 0)
-		schedule_work(&lp->phy_configure);
-
-	/* We can accept TX packets again */
-	dev->trans_start = jiffies; /* prevent tx timeout */
-	netif_wake_queue(dev);
-}
-
-/*
- * This routine will, depending on the values passed to it,
- * either make it accept multicast packets, go into
- * promiscuous mode (for TCPDUMP and cousins) or accept
- * a select set of multicast packets
- */
-static void smc_set_multicast_list(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-	unsigned char multicast_table[8];
-	int update_multicast = 0;
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	if (dev->flags & IFF_PROMISC) {
-		DBG(2, "%s: RCR_PRMS\n", dev->name);
-		lp->rcr_cur_mode |= RCR_PRMS;
-	}
-
-/* BUG?  I never disable promiscuous mode if multicasting was turned on.
-   Now, I turn off promiscuous mode, but I don't do anything to multicasting
-   when promiscuous mode is turned on.
-*/
-
-	/*
-	 * Here, I am setting this to accept all multicast packets.
-	 * I don't need to zero the multicast table, because the flag is
-	 * checked before the table is
-	 */
-	else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
-		DBG(2, "%s: RCR_ALMUL\n", dev->name);
-		lp->rcr_cur_mode |= RCR_ALMUL;
-	}
-
-	/*
-	 * This sets the internal hardware table to filter out unwanted
-	 * multicast packets before they take up memory.
-	 *
-	 * The SMC chip uses a hash table where the high 6 bits of the CRC of
-	 * address are the offset into the table.  If that bit is 1, then the
-	 * multicast packet is accepted.  Otherwise, it's dropped silently.
-	 *
-	 * To use the 6 bits as an offset into the table, the high 3 bits are
-	 * the number of the 8 bit register, while the low 3 bits are the bit
-	 * within that register.
-	 */
-	else if (!netdev_mc_empty(dev)) {
-		struct netdev_hw_addr *ha;
-
-		/* table for flipping the order of 3 bits */
-		static const unsigned char invert3[] = {0, 4, 2, 6, 1, 5, 3, 7};
-
-		/* start with a table of all zeros: reject all */
-		memset(multicast_table, 0, sizeof(multicast_table));
-
-		netdev_for_each_mc_addr(ha, dev) {
-			int position;
-
-			/* only use the low order bits */
-			position = crc32_le(~0, ha->addr, 6) & 0x3f;
-
-			/* do some messy swapping to put the bit in the right spot */
-			multicast_table[invert3[position&7]] |=
-				(1<<invert3[(position>>3)&7]);
-		}
-
-		/* be sure I get rid of flags I might have set */
-		lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
-
-		/* now, the table can be loaded into the chipset */
-		update_multicast = 1;
-	} else  {
-		DBG(2, "%s: ~(RCR_PRMS|RCR_ALMUL)\n", dev->name);
-		lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
-
-		/*
-		 * since I'm disabling all multicast entirely, I need to
-		 * clear the multicast list
-		 */
-		memset(multicast_table, 0, sizeof(multicast_table));
-		update_multicast = 1;
-	}
-
-	spin_lock_irq(&lp->lock);
-	SMC_SELECT_BANK(lp, 0);
-	SMC_SET_RCR(lp, lp->rcr_cur_mode);
-	if (update_multicast) {
-		SMC_SELECT_BANK(lp, 3);
-		SMC_SET_MCAST(lp, multicast_table);
-	}
-	SMC_SELECT_BANK(lp, 2);
-	spin_unlock_irq(&lp->lock);
-}
-
-
-/*
- * Open and Initialize the board
- *
- * Set up everything, reset the card, etc..
- */
-static int
-smc_open(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	/*
-	 * Check that the address is valid.  If its not, refuse
-	 * to bring the device up.  The user must specify an
-	 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
-	 */
-	if (!is_valid_ether_addr(dev->dev_addr)) {
-		PRINTK("%s: no valid ethernet hw addr\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Setup the default Register Modes */
-	lp->tcr_cur_mode = TCR_DEFAULT;
-	lp->rcr_cur_mode = RCR_DEFAULT;
-	lp->rpc_cur_mode = RPC_DEFAULT |
-				lp->cfg.leda << RPC_LSXA_SHFT |
-				lp->cfg.ledb << RPC_LSXB_SHFT;
-
-	/*
-	 * If we are not using a MII interface, we need to
-	 * monitor our own carrier signal to detect faults.
-	 */
-	if (lp->phy_type == 0)
-		lp->tcr_cur_mode |= TCR_MON_CSN;
-
-	/* reset the hardware */
-	smc_reset(dev);
-	smc_enable(dev);
-
-	/* Configure the PHY, initialize the link state */
-	if (lp->phy_type != 0)
-		smc_phy_configure(&lp->phy_configure);
-	else {
-		spin_lock_irq(&lp->lock);
-		smc_10bt_check_media(dev, 1);
-		spin_unlock_irq(&lp->lock);
-	}
-
-	netif_start_queue(dev);
-	return 0;
-}
-
-/*
- * smc_close
- *
- * this makes the board clean up everything that it can
- * and not talk to the outside world.   Caused by
- * an 'ifconfig ethX down'
- */
-static int smc_close(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-
-	DBG(2, "%s: %s\n", dev->name, __func__);
-
-	netif_stop_queue(dev);
-	netif_carrier_off(dev);
-
-	/* clear everything */
-	smc_shutdown(dev);
-	tasklet_kill(&lp->tx_task);
-	smc_phy_powerdown(dev);
-	return 0;
-}
-
-/*
- * Ethtool support
- */
-static int
-smc_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	int ret;
-
-	cmd->maxtxpkt = 1;
-	cmd->maxrxpkt = 1;
-
-	if (lp->phy_type != 0) {
-		spin_lock_irq(&lp->lock);
-		ret = mii_ethtool_gset(&lp->mii, cmd);
-		spin_unlock_irq(&lp->lock);
-	} else {
-		cmd->supported = SUPPORTED_10baseT_Half |
-				 SUPPORTED_10baseT_Full |
-				 SUPPORTED_TP | SUPPORTED_AUI;
-
-		if (lp->ctl_rspeed == 10)
-			ethtool_cmd_speed_set(cmd, SPEED_10);
-		else if (lp->ctl_rspeed == 100)
-			ethtool_cmd_speed_set(cmd, SPEED_100);
-
-		cmd->autoneg = AUTONEG_DISABLE;
-		cmd->transceiver = XCVR_INTERNAL;
-		cmd->port = 0;
-		cmd->duplex = lp->tcr_cur_mode & TCR_SWFDUP ? DUPLEX_FULL : DUPLEX_HALF;
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-static int
-smc_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	int ret;
-
-	if (lp->phy_type != 0) {
-		spin_lock_irq(&lp->lock);
-		ret = mii_ethtool_sset(&lp->mii, cmd);
-		spin_unlock_irq(&lp->lock);
-	} else {
-		if (cmd->autoneg != AUTONEG_DISABLE ||
-		    cmd->speed != SPEED_10 ||
-		    (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
-		    (cmd->port != PORT_TP && cmd->port != PORT_AUI))
-			return -EINVAL;
-
-//		lp->port = cmd->port;
-		lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
-
-//		if (netif_running(dev))
-//			smc_set_port(dev);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-static void
-smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	strncpy(info->driver, CARDNAME, sizeof(info->driver));
-	strncpy(info->version, version, sizeof(info->version));
-	strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
-}
-
-static int smc_ethtool_nwayreset(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	int ret = -EINVAL;
-
-	if (lp->phy_type != 0) {
-		spin_lock_irq(&lp->lock);
-		ret = mii_nway_restart(&lp->mii);
-		spin_unlock_irq(&lp->lock);
-	}
-
-	return ret;
-}
-
-static u32 smc_ethtool_getmsglevel(struct net_device *dev)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	return lp->msg_enable;
-}
-
-static void smc_ethtool_setmsglevel(struct net_device *dev, u32 level)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	lp->msg_enable = level;
-}
-
-static int smc_write_eeprom_word(struct net_device *dev, u16 addr, u16 word)
-{
-	u16 ctl;
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-
-	spin_lock_irq(&lp->lock);
-	/* load word into GP register */
-	SMC_SELECT_BANK(lp, 1);
-	SMC_SET_GP(lp, word);
-	/* set the address to put the data in EEPROM */
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_PTR(lp, addr);
-	/* tell it to write */
-	SMC_SELECT_BANK(lp, 1);
-	ctl = SMC_GET_CTL(lp);
-	SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_STORE));
-	/* wait for it to finish */
-	do {
-		udelay(1);
-	} while (SMC_GET_CTL(lp) & CTL_STORE);
-	/* clean up */
-	SMC_SET_CTL(lp, ctl);
-	SMC_SELECT_BANK(lp, 2);
-	spin_unlock_irq(&lp->lock);
-	return 0;
-}
-
-static int smc_read_eeprom_word(struct net_device *dev, u16 addr, u16 *word)
-{
-	u16 ctl;
-	struct smc_local *lp = netdev_priv(dev);
-	void __iomem *ioaddr = lp->base;
-
-	spin_lock_irq(&lp->lock);
-	/* set the EEPROM address to get the data from */
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_PTR(lp, addr | PTR_READ);
-	/* tell it to load */
-	SMC_SELECT_BANK(lp, 1);
-	SMC_SET_GP(lp, 0xffff);	/* init to known */
-	ctl = SMC_GET_CTL(lp);
-	SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_RELOAD));
-	/* wait for it to finish */
-	do {
-		udelay(1);
-	} while (SMC_GET_CTL(lp) & CTL_RELOAD);
-	/* read word from GP register */
-	*word = SMC_GET_GP(lp);
-	/* clean up */
-	SMC_SET_CTL(lp, ctl);
-	SMC_SELECT_BANK(lp, 2);
-	spin_unlock_irq(&lp->lock);
-	return 0;
-}
-
-static int smc_ethtool_geteeprom_len(struct net_device *dev)
-{
-	return 0x23 * 2;
-}
-
-static int smc_ethtool_geteeprom(struct net_device *dev,
-		struct ethtool_eeprom *eeprom, u8 *data)
-{
-	int i;
-	int imax;
-
-	DBG(1, "Reading %d bytes at %d(0x%x)\n",
-		eeprom->len, eeprom->offset, eeprom->offset);
-	imax = smc_ethtool_geteeprom_len(dev);
-	for (i = 0; i < eeprom->len; i += 2) {
-		int ret;
-		u16 wbuf;
-		int offset = i + eeprom->offset;
-		if (offset > imax)
-			break;
-		ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf);
-		if (ret != 0)
-			return ret;
-		DBG(2, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
-		data[i] = (wbuf >> 8) & 0xff;
-		data[i+1] = wbuf & 0xff;
-	}
-	return 0;
-}
-
-static int smc_ethtool_seteeprom(struct net_device *dev,
-		struct ethtool_eeprom *eeprom, u8 *data)
-{
-	int i;
-	int imax;
-
-	DBG(1, "Writing %d bytes to %d(0x%x)\n",
-			eeprom->len, eeprom->offset, eeprom->offset);
-	imax = smc_ethtool_geteeprom_len(dev);
-	for (i = 0; i < eeprom->len; i += 2) {
-		int ret;
-		u16 wbuf;
-		int offset = i + eeprom->offset;
-		if (offset > imax)
-			break;
-		wbuf = (data[i] << 8) | data[i + 1];
-		DBG(2, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
-		ret = smc_write_eeprom_word(dev, offset >> 1, wbuf);
-		if (ret != 0)
-			return ret;
-	}
-	return 0;
-}
-
-
-static const struct ethtool_ops smc_ethtool_ops = {
-	.get_settings	= smc_ethtool_getsettings,
-	.set_settings	= smc_ethtool_setsettings,
-	.get_drvinfo	= smc_ethtool_getdrvinfo,
-
-	.get_msglevel	= smc_ethtool_getmsglevel,
-	.set_msglevel	= smc_ethtool_setmsglevel,
-	.nway_reset	= smc_ethtool_nwayreset,
-	.get_link	= ethtool_op_get_link,
-	.get_eeprom_len = smc_ethtool_geteeprom_len,
-	.get_eeprom	= smc_ethtool_geteeprom,
-	.set_eeprom	= smc_ethtool_seteeprom,
-};
-
-static const struct net_device_ops smc_netdev_ops = {
-	.ndo_open		= smc_open,
-	.ndo_stop		= smc_close,
-	.ndo_start_xmit		= smc_hard_start_xmit,
-	.ndo_tx_timeout		= smc_timeout,
-	.ndo_set_multicast_list	= smc_set_multicast_list,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address 	= eth_mac_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	.ndo_poll_controller	= smc_poll_controller,
-#endif
-};
-
-/*
- * smc_findirq
- *
- * This routine has a simple purpose -- make the SMC chip generate an
- * interrupt, so an auto-detect routine can detect it, and find the IRQ,
- */
-/*
- * does this still work?
- *
- * I just deleted auto_irq.c, since it was never built...
- *   --jgarzik
- */
-static int __devinit smc_findirq(struct smc_local *lp)
-{
-	void __iomem *ioaddr = lp->base;
-	int timeout = 20;
-	unsigned long cookie;
-
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
-
-	cookie = probe_irq_on();
-
-	/*
-	 * What I try to do here is trigger an ALLOC_INT. This is done
-	 * by allocating a small chunk of memory, which will give an interrupt
-	 * when done.
-	 */
-	/* enable ALLOCation interrupts ONLY */
-	SMC_SELECT_BANK(lp, 2);
-	SMC_SET_INT_MASK(lp, IM_ALLOC_INT);
-
-	/*
- 	 * Allocate 512 bytes of memory.  Note that the chip was just
-	 * reset so all the memory is available
-	 */
-	SMC_SET_MMU_CMD(lp, MC_ALLOC | 1);
-
-	/*
-	 * Wait until positive that the interrupt has been generated
-	 */
-	do {
-		int int_status;
-		udelay(10);
-		int_status = SMC_GET_INT(lp);
-		if (int_status & IM_ALLOC_INT)
-			break;		/* got the interrupt */
-	} while (--timeout);
-
-	/*
-	 * there is really nothing that I can do here if timeout fails,
-	 * as autoirq_report will return a 0 anyway, which is what I
-	 * want in this case.   Plus, the clean up is needed in both
-	 * cases.
-	 */
-
-	/* and disable all interrupts again */
-	SMC_SET_INT_MASK(lp, 0);
-
-	/* and return what I found */
-	return probe_irq_off(cookie);
-}
-
-/*
- * Function: smc_probe(unsigned long ioaddr)
- *
- * Purpose:
- *	Tests to see if a given ioaddr points to an SMC91x chip.
- *	Returns a 0 on success
- *
- * Algorithm:
- *	(1) see if the high byte of BANK_SELECT is 0x33
- * 	(2) compare the ioaddr with the base register's address
- *	(3) see if I recognize the chip ID in the appropriate register
- *
- * Here I do typical initialization tasks.
- *
- * o  Initialize the structure if needed
- * o  print out my vanity message if not done so already
- * o  print out what type of hardware is detected
- * o  print out the ethernet address
- * o  find the IRQ
- * o  set up my private data
- * o  configure the dev structure with my subroutines
- * o  actually GRAB the irq.
- * o  GRAB the region
- */
-static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
-			    unsigned long irq_flags)
-{
-	struct smc_local *lp = netdev_priv(dev);
-	static int version_printed = 0;
-	int retval;
-	unsigned int val, revision_register;
-	const char *version_string;
-
-	DBG(2, "%s: %s\n", CARDNAME, __func__);
-
-	/* First, see if the high byte is 0x33 */
-	val = SMC_CURRENT_BANK(lp);
-	DBG(2, "%s: bank signature probe returned 0x%04x\n", CARDNAME, val);
-	if ((val & 0xFF00) != 0x3300) {
-		if ((val & 0xFF) == 0x33) {
-			printk(KERN_WARNING
-				"%s: Detected possible byte-swapped interface"
-				" at IOADDR %p\n", CARDNAME, ioaddr);
-		}
-		retval = -ENODEV;
-		goto err_out;
-	}
-
-	/*
-	 * The above MIGHT indicate a device, but I need to write to
-	 * further test this.
-	 */
-	SMC_SELECT_BANK(lp, 0);
-	val = SMC_CURRENT_BANK(lp);
-	if ((val & 0xFF00) != 0x3300) {
-		retval = -ENODEV;
-		goto err_out;
-	}
-
-	/*
-	 * well, we've already written once, so hopefully another
-	 * time won't hurt.  This time, I need to switch the bank
-	 * register to bank 1, so I can access the base address
-	 * register
-	 */
-	SMC_SELECT_BANK(lp, 1);
-	val = SMC_GET_BASE(lp);
-	val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
-	if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
-		printk("%s: IOADDR %p doesn't match configuration (%x).\n",
-			CARDNAME, ioaddr, val);
-	}
-
-	/*
-	 * check if the revision register is something that I
-	 * recognize.  These might need to be added to later,
-	 * as future revisions could be added.
-	 */
-	SMC_SELECT_BANK(lp, 3);
-	revision_register = SMC_GET_REV(lp);
-	DBG(2, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
-	version_string = chip_ids[ (revision_register >> 4) & 0xF];
-	if (!version_string || (revision_register & 0xff00) != 0x3300) {
-		/* I don't recognize this chip, so... */
-		printk("%s: IO %p: Unrecognized revision register 0x%04x"
-			", Contact author.\n", CARDNAME,
-			ioaddr, revision_register);
-
-		retval = -ENODEV;
-		goto err_out;
-	}
-
-	/* At this point I'll assume that the chip is an SMC91x. */
-	if (version_printed++ == 0)
-		printk("%s", version);
-
-	/* fill in some of the fields */
-	dev->base_addr = (unsigned long)ioaddr;
-	lp->base = ioaddr;
-	lp->version = revision_register & 0xff;
-	spin_lock_init(&lp->lock);
-
-	/* Get the MAC address */
-	SMC_SELECT_BANK(lp, 1);
-	SMC_GET_MAC_ADDR(lp, dev->dev_addr);
-
-	/* now, reset the chip, and put it into a known state */
-	smc_reset(dev);
-
-	/*
-	 * If dev->irq is 0, then the device has to be banged on to see
-	 * what the IRQ is.
- 	 *
-	 * This banging doesn't always detect the IRQ, for unknown reasons.
-	 * a workaround is to reset the chip and try again.
-	 *
-	 * Interestingly, the DOS packet driver *SETS* the IRQ on the card to
-	 * be what is requested on the command line.   I don't do that, mostly
-	 * because the card that I have uses a non-standard method of accessing
-	 * the IRQs, and because this _should_ work in most configurations.
-	 *
-	 * Specifying an IRQ is done with the assumption that the user knows
-	 * what (s)he is doing.  No checking is done!!!!
-	 */
-	if (dev->irq < 1) {
-		int trials;
-
-		trials = 3;
-		while (trials--) {
-			dev->irq = smc_findirq(lp);
-			if (dev->irq)
-				break;
-			/* kick the card and try again */
-			smc_reset(dev);
-		}
-	}
-	if (dev->irq == 0) {
-		printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n",
-			dev->name);
-		retval = -ENODEV;
-		goto err_out;
-	}
-	dev->irq = irq_canonicalize(dev->irq);
-
-	/* Fill in the fields of the device structure with ethernet values. */
-	ether_setup(dev);
-
-	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
-	dev->netdev_ops = &smc_netdev_ops;
-	dev->ethtool_ops = &smc_ethtool_ops;
-
-	tasklet_init(&lp->tx_task, smc_hardware_send_pkt, (unsigned long)dev);
-	INIT_WORK(&lp->phy_configure, smc_phy_configure);
-	lp->dev = dev;
-	lp->mii.phy_id_mask = 0x1f;
-	lp->mii.reg_num_mask = 0x1f;
-	lp->mii.force_media = 0;
-	lp->mii.full_duplex = 0;
-	lp->mii.dev = dev;
-	lp->mii.mdio_read = smc_phy_read;
-	lp->mii.mdio_write = smc_phy_write;
-
-	/*
-	 * Locate the phy, if any.
-	 */
-	if (lp->version >= (CHIP_91100 << 4))
-		smc_phy_detect(dev);
-
-	/* then shut everything down to save power */
-	smc_shutdown(dev);
-	smc_phy_powerdown(dev);
-
-	/* Set default parameters */
-	lp->msg_enable = NETIF_MSG_LINK;
-	lp->ctl_rfduplx = 0;
-	lp->ctl_rspeed = 10;
-
-	if (lp->version >= (CHIP_91100 << 4)) {
-		lp->ctl_rfduplx = 1;
-		lp->ctl_rspeed = 100;
-	}
-
-	/* Grab the IRQ */
-	retval = request_irq(dev->irq, smc_interrupt, irq_flags, dev->name, dev);
-      	if (retval)
-      		goto err_out;
-
-#ifdef CONFIG_ARCH_PXA
-#  ifdef SMC_USE_PXA_DMA
-	lp->cfg.flags |= SMC91X_USE_DMA;
-#  endif
-	if (lp->cfg.flags & SMC91X_USE_DMA) {
-		int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
-					  smc_pxa_dma_irq, NULL);
-		if (dma >= 0)
-			dev->dma = dma;
-	}
-#endif
-
-	retval = register_netdev(dev);
-	if (retval == 0) {
-		/* now, print out the card info, in a short format.. */
-		printk("%s: %s (rev %d) at %p IRQ %d",
-			dev->name, version_string, revision_register & 0x0f,
-			lp->base, dev->irq);
-
-		if (dev->dma != (unsigned char)-1)
-			printk(" DMA %d", dev->dma);
-
-		printk("%s%s\n",
-			lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "",
-			THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
-
-		if (!is_valid_ether_addr(dev->dev_addr)) {
-			printk("%s: Invalid ethernet MAC address.  Please "
-			       "set using ifconfig\n", dev->name);
-		} else {
-			/* Print the Ethernet address */
-			printk("%s: Ethernet addr: %pM\n",
-			       dev->name, dev->dev_addr);
-		}
-
-		if (lp->phy_type == 0) {
-			PRINTK("%s: No PHY found\n", dev->name);
-		} else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) {
-			PRINTK("%s: PHY LAN83C183 (LAN91C111 Internal)\n", dev->name);
-		} else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) {
-			PRINTK("%s: PHY LAN83C180\n", dev->name);
-		}
-	}
-
-err_out:
-#ifdef CONFIG_ARCH_PXA
-	if (retval && dev->dma != (unsigned char)-1)
-		pxa_free_dma(dev->dma);
-#endif
-	return retval;
-}
-
-static int smc_enable_device(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct smc_local *lp = netdev_priv(ndev);
-	unsigned long flags;
-	unsigned char ecor, ecsr;
-	void __iomem *addr;
-	struct resource * res;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
-	if (!res)
-		return 0;
-
-	/*
-	 * Map the attribute space.  This is overkill, but clean.
-	 */
-	addr = ioremap(res->start, ATTRIB_SIZE);
-	if (!addr)
-		return -ENOMEM;
-
-	/*
-	 * Reset the device.  We must disable IRQs around this
-	 * since a reset causes the IRQ line become active.
-	 */
-	local_irq_save(flags);
-	ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
-	writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
-	readb(addr + (ECOR << SMC_IO_SHIFT));
-
-	/*
-	 * Wait 100us for the chip to reset.
-	 */
-	udelay(100);
-
-	/*
-	 * The device will ignore all writes to the enable bit while
-	 * reset is asserted, even if the reset bit is cleared in the
-	 * same write.  Must clear reset first, then enable the device.
-	 */
-	writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
-	writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
-
-	/*
-	 * Set the appropriate byte/word mode.
-	 */
-	ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
-	if (!SMC_16BIT(lp))
-		ecsr |= ECSR_IOIS8;
-	writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
-	local_irq_restore(flags);
-
-	iounmap(addr);
-
-	/*
-	 * Wait for the chip to wake up.  We could poll the control
-	 * register in the main register space, but that isn't mapped
-	 * yet.  We know this is going to take 750us.
-	 */
-	msleep(1);
-
-	return 0;
-}
-
-static int smc_request_attrib(struct platform_device *pdev,
-			      struct net_device *ndev)
-{
-	struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
-	struct smc_local *lp __maybe_unused = netdev_priv(ndev);
-
-	if (!res)
-		return 0;
-
-	if (!request_mem_region(res->start, ATTRIB_SIZE, CARDNAME))
-		return -EBUSY;
-
-	return 0;
-}
-
-static void smc_release_attrib(struct platform_device *pdev,
-			       struct net_device *ndev)
-{
-	struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
-	struct smc_local *lp __maybe_unused = netdev_priv(ndev);
-
-	if (res)
-		release_mem_region(res->start, ATTRIB_SIZE);
-}
-
-static inline void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev)
-{
-	if (SMC_CAN_USE_DATACS) {
-		struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32");
-		struct smc_local *lp = netdev_priv(ndev);
-
-		if (!res)
-			return;
-
-		if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) {
-			printk(KERN_INFO "%s: failed to request datacs memory region.\n", CARDNAME);
-			return;
-		}
-
-		lp->datacs = ioremap(res->start, SMC_DATA_EXTENT);
-	}
-}
-
-static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev)
-{
-	if (SMC_CAN_USE_DATACS) {
-		struct smc_local *lp = netdev_priv(ndev);
-		struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32");
-
-		if (lp->datacs)
-			iounmap(lp->datacs);
-
-		lp->datacs = NULL;
-
-		if (res)
-			release_mem_region(res->start, SMC_DATA_EXTENT);
-	}
-}
-
-/*
- * smc_init(void)
- *   Input parameters:
- *	dev->base_addr == 0, try to find all possible locations
- *	dev->base_addr > 0x1ff, this is the address to check
- *	dev->base_addr == <anything else>, return failure code
- *
- *   Output:
- *	0 --> there is a device
- *	anything else, error
- */
-static int __devinit smc_drv_probe(struct platform_device *pdev)
-{
-	struct smc91x_platdata *pd = pdev->dev.platform_data;
-	struct smc_local *lp;
-	struct net_device *ndev;
-	struct resource *res, *ires;
-	unsigned int __iomem *addr;
-	unsigned long irq_flags = SMC_IRQ_FLAGS;
-	int ret;
-
-	ndev = alloc_etherdev(sizeof(struct smc_local));
-	if (!ndev) {
-		printk("%s: could not allocate device.\n", CARDNAME);
-		ret = -ENOMEM;
-		goto out;
-	}
-	SET_NETDEV_DEV(ndev, &pdev->dev);
-
-	/* get configuration from platform data, only allow use of
-	 * bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set.
-	 */
-
-	lp = netdev_priv(ndev);
-
-	if (pd) {
-		memcpy(&lp->cfg, pd, sizeof(lp->cfg));
-		lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags);
-	} else {
-		lp->cfg.flags |= (SMC_CAN_USE_8BIT)  ? SMC91X_USE_8BIT  : 0;
-		lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
-		lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
-		lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
-	}
-
-	if (!lp->cfg.leda && !lp->cfg.ledb) {
-		lp->cfg.leda = RPC_LSA_DEFAULT;
-		lp->cfg.ledb = RPC_LSB_DEFAULT;
-	}
-
-	ndev->dma = (unsigned char)-1;
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
-	if (!res)
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto out_free_netdev;
-	}
-
-
-	if (!request_mem_region(res->start, SMC_IO_EXTENT, CARDNAME)) {
-		ret = -EBUSY;
-		goto out_free_netdev;
-	}
-
-	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!ires) {
-		ret = -ENODEV;
-		goto out_release_io;
-	}
-
-	ndev->irq = ires->start;
-
-	if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK)
-		irq_flags = ires->flags & IRQF_TRIGGER_MASK;
-
-	ret = smc_request_attrib(pdev, ndev);
-	if (ret)
-		goto out_release_io;
-#if defined(CONFIG_SA1100_ASSABET)
-	NCR_0 |= NCR_ENET_OSC_EN;
-#endif
-	platform_set_drvdata(pdev, ndev);
-	ret = smc_enable_device(pdev);
-	if (ret)
-		goto out_release_attrib;
-
-	addr = ioremap(res->start, SMC_IO_EXTENT);
-	if (!addr) {
-		ret = -ENOMEM;
-		goto out_release_attrib;
-	}
-
-#ifdef CONFIG_ARCH_PXA
-	{
-		struct smc_local *lp = netdev_priv(ndev);
-		lp->device = &pdev->dev;
-		lp->physaddr = res->start;
-	}
-#endif
-
-	ret = smc_probe(ndev, addr, irq_flags);
-	if (ret != 0)
-		goto out_iounmap;
-
-	smc_request_datacs(pdev, ndev);
-
-	return 0;
-
- out_iounmap:
-	platform_set_drvdata(pdev, NULL);
-	iounmap(addr);
- out_release_attrib:
-	smc_release_attrib(pdev, ndev);
- out_release_io:
-	release_mem_region(res->start, SMC_IO_EXTENT);
- out_free_netdev:
-	free_netdev(ndev);
- out:
-	printk("%s: not found (%d).\n", CARDNAME, ret);
-
-	return ret;
-}
-
-static int __devexit smc_drv_remove(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct smc_local *lp = netdev_priv(ndev);
-	struct resource *res;
-
-	platform_set_drvdata(pdev, NULL);
-
-	unregister_netdev(ndev);
-
-	free_irq(ndev->irq, ndev);
-
-#ifdef CONFIG_ARCH_PXA
-	if (ndev->dma != (unsigned char)-1)
-		pxa_free_dma(ndev->dma);
-#endif
-	iounmap(lp->base);
-
-	smc_release_datacs(pdev,ndev);
-	smc_release_attrib(pdev,ndev);
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
-	if (!res)
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, SMC_IO_EXTENT);
-
-	free_netdev(ndev);
-
-	return 0;
-}
-
-static int smc_drv_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct net_device *ndev = platform_get_drvdata(pdev);
-
-	if (ndev) {
-		if (netif_running(ndev)) {
-			netif_device_detach(ndev);
-			smc_shutdown(ndev);
-			smc_phy_powerdown(ndev);
-		}
-	}
-	return 0;
-}
-
-static int smc_drv_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct net_device *ndev = platform_get_drvdata(pdev);
-
-	if (ndev) {
-		struct smc_local *lp = netdev_priv(ndev);
-		smc_enable_device(pdev);
-		if (netif_running(ndev)) {
-			smc_reset(ndev);
-			smc_enable(ndev);
-			if (lp->phy_type != 0)
-				smc_phy_configure(&lp->phy_configure);
-			netif_device_attach(ndev);
-		}
-	}
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id smc91x_match[] = {
-	{ .compatible = "smsc,lan91c94", },
-	{ .compatible = "smsc,lan91c111", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, smc91x_match);
-#else
-#define smc91x_match NULL
-#endif
-
-static struct dev_pm_ops smc_drv_pm_ops = {
-	.suspend	= smc_drv_suspend,
-	.resume		= smc_drv_resume,
-};
-
-static struct platform_driver smc_driver = {
-	.probe		= smc_drv_probe,
-	.remove		= __devexit_p(smc_drv_remove),
-	.driver		= {
-		.name	= CARDNAME,
-		.owner	= THIS_MODULE,
-		.pm	= &smc_drv_pm_ops,
-		.of_match_table = smc91x_match,
-	},
-};
-
-static int __init smc_init(void)
-{
-	return platform_driver_register(&smc_driver);
-}
-
-static void __exit smc_cleanup(void)
-{
-	platform_driver_unregister(&smc_driver);
-}
-
-module_init(smc_init);
-module_exit(smc_cleanup);