summaryrefslogtreecommitdiffstats
path: root/drivers/net/sky2.c
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@vyatta.com>2008-11-19 21:59:54 -0800
committerDavid S. Miller <davem@davemloft.net>2008-11-19 22:42:44 -0800
commit1436b301ec2b184fc01dc29fa22d1fbac619b491 (patch)
tree3f99df66c5d1e273231368e9c55ceac269a6eeac /drivers/net/sky2.c
parent651c24669316b955c3c7797bd535cdaa4533cb16 (diff)
downloadlinux-1436b301ec2b184fc01dc29fa22d1fbac619b491.tar.bz2
sky2: convert to net_device_ops
Convert to new network device ops interface. Slight additional complexity here because the second port does not allow netpoll and therefore has different virtual function table. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r--drivers/net/sky2.c48
1 files changed, 35 insertions, 13 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 4dcd1a62fb49..251505125cb8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3979,7 +3979,7 @@ static int sky2_device_event(struct notifier_block *unused,
struct net_device *dev = ptr;
struct sky2_port *sky2 = netdev_priv(dev);
- if (dev->open != sky2_up || !sky2_debug)
+ if (dev->netdev_ops->ndo_open != sky2_up || !sky2_debug)
return NOTIFY_DONE;
switch(event) {
@@ -4041,6 +4041,39 @@ static __exit void sky2_debug_cleanup(void)
#define sky2_debug_cleanup()
#endif
+/* Two copies of network device operations to handle special case of
+ not allowing netpoll on second port */
+static const struct net_device_ops sky2_netdev_ops[2] = {
+ {
+ .ndo_open = sky2_up,
+ .ndo_stop = sky2_down,
+ .ndo_do_ioctl = sky2_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = sky2_set_mac_address,
+ .ndo_set_multicast_list = sky2_set_multicast,
+ .ndo_change_mtu = sky2_change_mtu,
+ .ndo_tx_timeout = sky2_tx_timeout,
+#ifdef SKY2_VLAN_TAG_USED
+ .ndo_vlan_rx_register = sky2_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = sky2_netpoll,
+#endif
+ },
+ {
+ .ndo_open = sky2_up,
+ .ndo_stop = sky2_down,
+ .ndo_do_ioctl = sky2_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = sky2_set_mac_address,
+ .ndo_set_multicast_list = sky2_set_multicast,
+ .ndo_change_mtu = sky2_change_mtu,
+ .ndo_tx_timeout = sky2_tx_timeout,
+#ifdef SKY2_VLAN_TAG_USED
+ .ndo_vlan_rx_register = sky2_vlan_rx_register,
+#endif
+ },
+};
/* Initialize network device */
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
@@ -4057,20 +4090,10 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
SET_NETDEV_DEV(dev, &hw->pdev->dev);
dev->irq = hw->pdev->irq;
- dev->open = sky2_up;
- dev->stop = sky2_down;
- dev->do_ioctl = sky2_ioctl;
dev->hard_start_xmit = sky2_xmit_frame;
- dev->set_multicast_list = sky2_set_multicast;
- dev->set_mac_address = sky2_set_mac_address;
- dev->change_mtu = sky2_change_mtu;
SET_ETHTOOL_OPS(dev, &sky2_ethtool_ops);
- dev->tx_timeout = sky2_tx_timeout;
dev->watchdog_timeo = TX_WATCHDOG;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (port == 0)
- dev->poll_controller = sky2_netpoll;
-#endif
+ dev->netdev_ops = &sky2_netdev_ops[port];
sky2 = netdev_priv(dev);
sky2->netdev = dev;
@@ -4104,7 +4127,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- dev->vlan_rx_register = sky2_vlan_rx_register;
}
#endif