diff options
| author | raghavendra.koushik@neterion.com <raghavendra.koushik@neterion.com> | 2005-08-03 12:27:09 -0700 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@pobox.com> | 2005-08-11 00:10:44 -0400 |
| commit | 5e25b9ddb6683fe225a2266b53d73c57381a0c18 (patch) | |
| tree | b67e4253ec02e5a38c82cef823f76a815318db4f /drivers/net/s2io.h | |
| parent | 20346722ec474245446bcbf460594a935a5c0512 (diff) | |
| download | linux-5e25b9ddb6683fe225a2266b53d73c57381a0c18.tar.bz2 | |
[PATCH] S2io: Hardware fixes
Hi,
Below patch addresses few h/w specific issues.
1. Check for additional ownership bit on Rx path before
starting Rx processing.
2. Enable only 4 PCCs(Per Context Controller) for Xframe I
revisions less than 4.
3. Program Rx and Tx round robin registers depending on
no. of rings/FIFOs.
4. Tx continous interrupts is now a loadable parameter.
5. Reset the card if we get double-bit ECC errors.
6. A soft reset of XGXS being done to force a link state change has been
eliminated.
7. After a reset, clear "parity error detected" bit,
PCI-X ECC status register, and PCI_STATUS bit in
tx_pic_int register.
8. The error in the disabling allmulticast implementation has been
rectified.
9. Leave the PCI-X parameters MMRBC, OST etc. at their
BIOS/system defaults.
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Diffstat (limited to 'drivers/net/s2io.h')
| -rw-r--r-- | drivers/net/s2io.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 4d2fc7a40434..92db59a0fb11 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -372,6 +372,10 @@ typedef struct _RxD_t { #define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF) u64 Control_2; +#define THE_RXD_MARK 0x3 +#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2) +#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62) + #ifndef CONFIG_2BUFF_MODE #define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14) #define SET_BUFFER0_SIZE(val) vBIT(val,2,14) |