summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/at803x.c
diff options
context:
space:
mode:
authorMartin Blumenstingl <martin.blumenstingl@googlemail.com>2016-01-15 01:55:23 +0100
committerDavid S. Miller <davem@davemloft.net>2016-01-17 19:16:46 -0500
commita46bd63bc13b2190b343706d78deab220d5c4d45 (patch)
tree99f2f94e20b91ea3756860e596b9a556d60d7340 /drivers/net/phy/at803x.c
parent2e5f9f281ee8369f56d403b4a52942f19b6978f8 (diff)
downloadlinux-a46bd63bc13b2190b343706d78deab220d5c4d45.tar.bz2
net: phy: at803x: Clean up duplicate register definitions
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/phy/at803x.c')
-rw-r--r--drivers/net/phy/at803x.c19
1 files changed, 11 insertions, 8 deletions
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 333c1bc79929..f2c4e8df833c 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -20,9 +20,12 @@
#include <linux/gpio/consumer.h>
#define AT803X_INTR_ENABLE 0x12
+#define AT803X_INTR_ENABLE_INIT 0xec00
#define AT803X_INTR_STATUS 0x13
+
#define AT803X_SMART_SPEED 0x14
#define AT803X_LED_CONTROL 0x18
+
#define AT803X_WOL_ENABLE 0x01
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
@@ -31,13 +34,13 @@
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
-#define AT803X_INER 0x0012
-#define AT803X_INER_INIT 0xec00
-#define AT803X_INSR 0x0013
+
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
+
#define AT803X_DEBUG_REG_0 0x00
#define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15)
+
#define AT803X_DEBUG_REG_5 0x05
#define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8)
@@ -280,7 +283,7 @@ static int at803x_ack_interrupt(struct phy_device *phydev)
{
int err;
- err = phy_read(phydev, AT803X_INSR);
+ err = phy_read(phydev, AT803X_INTR_STATUS);
return (err < 0) ? err : 0;
}
@@ -290,13 +293,13 @@ static int at803x_config_intr(struct phy_device *phydev)
int err;
int value;
- value = phy_read(phydev, AT803X_INER);
+ value = phy_read(phydev, AT803X_INTR_ENABLE);
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
- err = phy_write(phydev, AT803X_INER,
- value | AT803X_INER_INIT);
+ err = phy_write(phydev, AT803X_INTR_ENABLE,
+ value | AT803X_INTR_ENABLE_INIT);
else
- err = phy_write(phydev, AT803X_INER, 0);
+ err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
return err;
}