irda: move drivers/net/irda to drivers/staging/irda/drivers

Move the irda drivers from drivers/net/irda/ to
drivers/staging/irda/drivers as they will be deleted in a future kernel
release.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 245 deletions

diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
deleted file mode 100644
index e224b8b99517..000000000000
--- a/drivers/net/irda/actisys-sir.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      actisys.c
- * Version:       1.1
- * Description:   Implementation for the ACTiSYS IR-220L and IR-220L+ 
- *                dongles
- * Status:        Beta.
- * Authors:       Dag Brattli <dagb@cs.uit.no> (initially)
- *		  Jean Tourrilhes <jt@hpl.hp.com> (new version)
- *		  Martin Diehl <mad@mdiehl.de> (new version for sir_dev)
- * Created at:    Wed Oct 21 20:02:35 1998
- * Modified at:   Sun Oct 27 22:02:13 2002
- * Modified by:   Martin Diehl <mad@mdiehl.de>
- * 
- *     Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- *     Copyright (c) 1999 Jean Tourrilhes
- *     Copyright (c) 2002 Martin Diehl
- *      
- *     This program is free software; you can redistribute it and/or 
- *     modify it under the terms of the GNU General Public License as 
- *     published by the Free Software Foundation; either version 2 of 
- *     the License, or (at your option) any later version.
- *  
- *     Neither Dag Brattli nor University of Tromsø admit liability nor
- *     provide warranty for any of this software. This material is 
- *     provided "AS-IS" and at no charge.
- *     
- ********************************************************************/
-
-/*
- * Changelog
- *
- * 0.8 -> 0.9999 - Jean
- *	o New initialisation procedure : much safer and correct
- *	o New procedure the change speed : much faster and simpler
- *	o Other cleanups & comments
- *	Thanks to Lichen Wang @ Actisys for his excellent help...
- *
- * 1.0 -> 1.1 - Martin Diehl
- *	modified for new sir infrastructure
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-/* 
- * Define the timing of the pulses we send to the dongle (to reset it, and
- * to toggle speeds). Basically, the limit here is the propagation speed of
- * the signals through the serial port, the dongle being much faster.  Any
- * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
- * go through cleanly . If you are on the wild side, you can try to lower
- * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
- */
-#define MIN_DELAY 10	/* 10 us to be on the conservative side */
-
-static int actisys_open(struct sir_dev *);
-static int actisys_close(struct sir_dev *);
-static int actisys_change_speed(struct sir_dev *, unsigned);
-static int actisys_reset(struct sir_dev *);
-
-/* These are the baudrates supported, in the order available */
-/* Note : the 220L doesn't support 38400, but we will fix that below */
-static unsigned baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
-
-#define MAX_SPEEDS ARRAY_SIZE(baud_rates)
-
-static struct dongle_driver act220l = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "Actisys ACT-220L",
-	.type		= IRDA_ACTISYS_DONGLE,
-	.open		= actisys_open,
-	.close		= actisys_close,
-	.reset		= actisys_reset,
-	.set_speed	= actisys_change_speed,
-};
-
-static struct dongle_driver act220l_plus = {
-	.owner		= THIS_MODULE,
-	.driver_name	= "Actisys ACT-220L+",
-	.type		= IRDA_ACTISYS_PLUS_DONGLE,
-	.open		= actisys_open,
-	.close		= actisys_close,
-	.reset		= actisys_reset,
-	.set_speed	= actisys_change_speed,
-};
-
-static int __init actisys_sir_init(void)
-{
-	int ret;
-
-	/* First, register an Actisys 220L dongle */
-	ret = irda_register_dongle(&act220l);
-	if (ret < 0)
-		return ret;
-
-	/* Now, register an Actisys 220L+ dongle */
-	ret = irda_register_dongle(&act220l_plus);
-	if (ret < 0) {
-		irda_unregister_dongle(&act220l);
-		return ret;
-	}
-	return 0;
-}
-
-static void __exit actisys_sir_cleanup(void)
-{
-	/* We have to remove both dongles */
-	irda_unregister_dongle(&act220l_plus);
-	irda_unregister_dongle(&act220l);
-}
-
-static int actisys_open(struct sir_dev *dev)
-{
-	struct qos_info *qos = &dev->qos;
-
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-
-	/* Set the speeds we can accept */
-	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-
-	/* Remove support for 38400 if this is not a 220L+ dongle */
-	if (dev->dongle_drv->type == IRDA_ACTISYS_DONGLE)
-		qos->baud_rate.bits &= ~IR_38400;
-
-	qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-	irda_qos_bits_to_value(qos);
-
-	/* irda thread waits 50 msec for power settling */
-
-	return 0;
-}
-
-static int actisys_close(struct sir_dev *dev)
-{
-	/* Power off the dongle */
-	sirdev_set_dtr_rts(dev, FALSE, FALSE);
-
-	return 0;
-}
-
-/*
- * Function actisys_change_speed (task)
- *
- *    Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
- *    To cycle through the available baud rates, pulse RTS low for a few us.
- *
- *	First, we reset the dongle to always start from a known state.
- *	Then, we cycle through the speeds by pulsing RTS low and then up.
- *	The dongle allow us to pulse quite fast, se we can set speed in one go,
- * which is must faster ( < 100 us) and less complex than what is found
- * in some other dongle drivers...
- *	Note that even if the new speed is the same as the current speed,
- * we reassert the speed. This make sure that things are all right,
- * and it's fast anyway...
- *	By the way, this function will work for both type of dongles,
- * because the additional speed is at the end of the sequence...
- */
-static int actisys_change_speed(struct sir_dev *dev, unsigned speed)
-{
-	int ret = 0;
-	int i = 0;
-
-	pr_debug("%s(), speed=%d (was %d)\n", __func__, speed, dev->speed);
-
-	/* dongle was already resetted from irda_request state machine,
-	 * we are in known state (dongle default)
-	 */
-
-	/* 
-	 * Now, we can set the speed requested. Send RTS pulses until we
-         * reach the target speed 
-	 */
-	for (i = 0; i < MAX_SPEEDS; i++) {
-		if (speed == baud_rates[i]) {
-			dev->speed = speed;
-			break;
-		}
-		/* Set RTS low for 10 us */
-		sirdev_set_dtr_rts(dev, TRUE, FALSE);
-		udelay(MIN_DELAY);
-
-		/* Set RTS high for 10 us */
-		sirdev_set_dtr_rts(dev, TRUE, TRUE);
-		udelay(MIN_DELAY);
-	}
-
-	/* Check if life is sweet... */
-	if (i >= MAX_SPEEDS) {
-		actisys_reset(dev);
-		ret = -EINVAL;  /* This should not happen */
-	}
-
-	/* Basta lavoro, on se casse d'ici... */
-	return ret;
-}
-
-/*
- * Function actisys_reset (task)
- *
- *      Reset the Actisys type dongle. Warning, this function must only be
- *      called with a process context!
- *
- * We need to do two things in this function :
- *	o first make sure that the dongle is in a state where it can operate
- *	o second put the dongle in a know state
- *
- *	The dongle is powered of the RTS and DTR lines. In the dongle, there
- * is a big capacitor to accommodate the current spikes. This capacitor
- * takes a least 50 ms to be charged. In theory, the Bios set those lines
- * up, so by the time we arrive here we should be set. It doesn't hurt
- * to be on the conservative side, so we will wait...
- * <Martin : move above comment to irda_config_fsm>
- *	Then, we set the speed to 9600 b/s to get in a known state (see in
- * change_speed for details). It is needed because the IrDA stack
- * has tried to set the speed immediately after our first return,
- * so before we can be sure the dongle is up and running.
- */
-
-static int actisys_reset(struct sir_dev *dev)
-{
-	/* Reset the dongle : set DTR low for 10 us */
-	sirdev_set_dtr_rts(dev, FALSE, TRUE);
-	udelay(MIN_DELAY);
-
-	/* Go back to normal mode */
-	sirdev_set_dtr_rts(dev, TRUE, TRUE);
-	
-	dev->speed = 9600;	/* That's the default */
-
-	return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");	
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
-MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
-
-module_init(actisys_sir_init);
-module_exit(actisys_sir_cleanup);