summaryrefslogtreecommitdiffstats
path: root/drivers/net/ieee802154
diff options
context:
space:
mode:
authorAlexander Aring <alex.aring@gmail.com>2015-09-21 11:24:35 +0200
committerMarcel Holtmann <marcel@holtmann.org>2015-09-22 11:51:22 +0200
commitc91a301162899ee100c1eab397958cb9aef50d0c (patch)
tree6b4c973b67e11e743b2cfcc16c927fa76500363c /drivers/net/ieee802154
parent6844a0e4debd67c9bcf6a8fed3c7f9c24413c349 (diff)
downloadlinux-c91a301162899ee100c1eab397958cb9aef50d0c.tar.bz2
mrf24j40: rework rx handling to async rx handling
This patch prepares that we can do the receive handling inside interrupt context by using spi_async. This is necessary for introduce a non-threaded irq handling. Also we drop the bit setting for "RXDECINV" at register "BBREG1", we do a driectly full write of register "BBREG1", because it contains the bit RXDECINV only. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'drivers/net/ieee802154')
-rw-r--r--drivers/net/ieee802154/mrf24j40.c282
1 files changed, 118 insertions, 164 deletions
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index 3cf06257b19f..0cb251efdc0e 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -167,6 +167,20 @@ struct mrf24j40 {
u8 tx_post_buf[2];
struct spi_transfer tx_post_trx;
+ /* for protect/unprotect/read length rxfifo */
+ struct spi_message rx_msg;
+ u8 rx_buf[3];
+ struct spi_transfer rx_trx;
+
+ /* receive handling */
+ struct spi_message rx_buf_msg;
+ u8 rx_addr_buf[2];
+ struct spi_transfer rx_addr_trx;
+ u8 rx_lqi_buf[2];
+ struct spi_transfer rx_lqi_trx;
+ u8 rx_fifo_buf[RX_FIFO_SIZE];
+ struct spi_transfer rx_fifo_buf_trx;
+
struct mutex buffer_mutex; /* only used to protect buf */
u8 *buf; /* 3 bytes. Used for SPI single-register transfers. */
};
@@ -472,32 +486,6 @@ static const struct regmap_bus mrf24j40_long_regmap_bus = {
.val_format_endian_default = REGMAP_ENDIAN_BIG,
};
-static int write_short_reg(struct mrf24j40 *devrec, u8 reg, u8 value)
-{
- int ret;
- struct spi_message msg;
- struct spi_transfer xfer = {
- .len = 2,
- .tx_buf = devrec->buf,
- .rx_buf = devrec->buf,
- };
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- mutex_lock(&devrec->buffer_mutex);
- devrec->buf[0] = MRF24J40_WRITESHORT(reg);
- devrec->buf[1] = value;
-
- ret = spi_sync(devrec->spi, &msg);
- if (ret)
- dev_err(printdev(devrec),
- "SPI write Failed for short register 0x%hhx\n", reg);
-
- mutex_unlock(&devrec->buffer_mutex);
- return ret;
-}
-
static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val)
{
int ret = -1;
@@ -526,37 +514,6 @@ static int read_short_reg(struct mrf24j40 *devrec, u8 reg, u8 *val)
return ret;
}
-static int read_long_reg(struct mrf24j40 *devrec, u16 reg, u8 *value)
-{
- int ret;
- u16 cmd;
- struct spi_message msg;
- struct spi_transfer xfer = {
- .len = 3,
- .tx_buf = devrec->buf,
- .rx_buf = devrec->buf,
- };
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- cmd = MRF24J40_READLONG(reg);
- mutex_lock(&devrec->buffer_mutex);
- devrec->buf[0] = cmd >> 8 & 0xff;
- devrec->buf[1] = cmd & 0xff;
- devrec->buf[2] = 0;
-
- ret = spi_sync(devrec->spi, &msg);
- if (ret)
- dev_err(printdev(devrec),
- "SPI read Failed for long register 0x%hx\n", reg);
- else
- *value = devrec->buf[2];
-
- mutex_unlock(&devrec->buffer_mutex);
- return ret;
-}
-
static void write_tx_buf_complete(void *context)
{
struct mrf24j40 *devrec = context;
@@ -616,78 +573,6 @@ static int mrf24j40_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
return write_tx_buf(devrec, 0x000, skb->data, skb->len);
}
-static int mrf24j40_read_rx_buf(struct mrf24j40 *devrec,
- u8 *data, u8 *len, u8 *lqi)
-{
- u8 rx_len;
- u8 addr[2];
- u8 lqi_rssi[2];
- u16 cmd;
- int ret;
- struct spi_message msg;
- struct spi_transfer addr_xfer = {
- .len = 2,
- .tx_buf = &addr,
- };
- struct spi_transfer data_xfer = {
- .len = 0x0, /* set below */
- .rx_buf = data,
- };
- struct spi_transfer status_xfer = {
- .len = 2,
- .rx_buf = &lqi_rssi,
- };
-
- /* Get the length of the data in the RX FIFO. The length in this
- * register exclues the 1-byte length field at the beginning. */
- ret = read_long_reg(devrec, REG_RX_FIFO, &rx_len);
- if (ret)
- goto out;
-
- /* Range check the RX FIFO length, accounting for the one-byte
- * length field at the beginning. */
- if (rx_len > RX_FIFO_SIZE-1) {
- dev_err(printdev(devrec), "Invalid length read from device. Performing short read.\n");
- rx_len = RX_FIFO_SIZE-1;
- }
-
- if (rx_len > *len) {
- /* Passed in buffer wasn't big enough. Should never happen. */
- dev_err(printdev(devrec), "Buffer not big enough. Performing short read\n");
- rx_len = *len;
- }
-
- /* Set up the commands to read the data. */
- cmd = MRF24J40_READLONG(REG_RX_FIFO+1);
- addr[0] = cmd >> 8 & 0xff;
- addr[1] = cmd & 0xff;
- data_xfer.len = rx_len;
-
- spi_message_init(&msg);
- spi_message_add_tail(&addr_xfer, &msg);
- spi_message_add_tail(&data_xfer, &msg);
- spi_message_add_tail(&status_xfer, &msg);
-
- ret = spi_sync(devrec->spi, &msg);
- if (ret) {
- dev_err(printdev(devrec), "SPI RX Buffer Read Failed.\n");
- goto out;
- }
-
- *lqi = lqi_rssi[0];
- *len = rx_len;
-
-#ifdef DEBUG
- print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ",
- DUMP_PREFIX_OFFSET, 16, 1, data, *len, 0);
- pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
- lqi_rssi[0], lqi_rssi[1]);
-#endif
-
-out:
- return ret;
-}
-
static int mrf24j40_ed(struct ieee802154_hw *hw, u8 *level)
{
/* TODO: */
@@ -823,53 +708,98 @@ static int mrf24j40_filter(struct ieee802154_hw *hw,
return 0;
}
-static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+static void mrf24j40_handle_rx_read_buf_unlock(struct mrf24j40 *devrec)
{
- u8 len = RX_FIFO_SIZE;
- u8 lqi = 0;
- u8 val;
- int ret = 0;
- int ret2;
- struct sk_buff *skb;
+ int ret;
- /* Turn off reception of packets off the air. This prevents the
- * device from overwriting the buffer while we're reading it. */
- ret = read_short_reg(devrec, REG_BBREG1, &val);
+ /* Turn back on reception of packets off the air. */
+ devrec->rx_msg.complete = NULL;
+ devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+ devrec->rx_buf[1] = 0x00; /* CLR RXDECINV */
+ ret = spi_async(devrec->spi, &devrec->rx_msg);
if (ret)
- goto out;
- val |= 4; /* SET RXDECINV */
- write_short_reg(devrec, REG_BBREG1, val);
+ dev_err(printdev(devrec), "failed to unlock rx buffer\n");
+}
- skb = dev_alloc_skb(len);
+static void mrf24j40_handle_rx_read_buf_complete(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u8 len = devrec->rx_buf[2];
+ u8 rx_local_buf[RX_FIFO_SIZE];
+ struct sk_buff *skb;
+
+ memcpy(rx_local_buf, devrec->rx_fifo_buf, len);
+ mrf24j40_handle_rx_read_buf_unlock(devrec);
+
+ skb = dev_alloc_skb(IEEE802154_MTU);
if (!skb) {
- ret = -ENOMEM;
- goto out;
+ dev_err(printdev(devrec), "failed to allocate skb\n");
+ return;
}
- ret = mrf24j40_read_rx_buf(devrec, skb_put(skb, len), &len, &lqi);
- if (ret < 0) {
- dev_err(printdev(devrec), "Failure reading RX FIFO\n");
- kfree_skb(skb);
- ret = -EINVAL;
- goto out;
+ memcpy(skb_put(skb, len), rx_local_buf, len);
+ ieee802154_rx_irqsafe(devrec->hw, skb, 0);
+
+#ifdef DEBUG
+ print_hex_dump(KERN_DEBUG, "mrf24j40 rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+ rx_local_buf, len, 0);
+ pr_debug("mrf24j40 rx: lqi: %02hhx rssi: %02hhx\n",
+ devrec->rx_lqi_buf[0], devrec->rx_lqi_buf[1]);
+#endif
+}
+
+static void mrf24j40_handle_rx_read_buf(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u16 cmd;
+ int ret;
+
+ /* if length is invalid read the full MTU */
+ if (!ieee802154_is_valid_psdu_len(devrec->rx_buf[2]))
+ devrec->rx_buf[2] = IEEE802154_MTU;
+
+ cmd = MRF24J40_READLONG(REG_RX_FIFO + 1);
+ devrec->rx_addr_buf[0] = cmd >> 8 & 0xff;
+ devrec->rx_addr_buf[1] = cmd & 0xff;
+ devrec->rx_fifo_buf_trx.len = devrec->rx_buf[2];
+ ret = spi_async(devrec->spi, &devrec->rx_buf_msg);
+ if (ret) {
+ dev_err(printdev(devrec), "failed to read rx buffer\n");
+ mrf24j40_handle_rx_read_buf_unlock(devrec);
}
+}
- /* TODO: Other drivers call ieee20154_rx_irqsafe() here (eg: cc2040,
- * also from a workqueue). I think irqsafe is not necessary here.
- * Can someone confirm? */
- ieee802154_rx_irqsafe(devrec->hw, skb, lqi);
+static void mrf24j40_handle_rx_read_len(void *context)
+{
+ struct mrf24j40 *devrec = context;
+ u16 cmd;
+ int ret;
- dev_dbg(printdev(devrec), "RX Handled\n");
+ /* read the length of received frame */
+ devrec->rx_msg.complete = mrf24j40_handle_rx_read_buf;
+ devrec->rx_trx.len = 3;
+ cmd = MRF24J40_READLONG(REG_RX_FIFO);
+ devrec->rx_buf[0] = cmd >> 8 & 0xff;
+ devrec->rx_buf[1] = cmd & 0xff;
-out:
- /* Turn back on reception of packets off the air. */
- ret2 = read_short_reg(devrec, REG_BBREG1, &val);
- if (ret2)
- return ret2;
- val &= ~0x4; /* Clear RXDECINV */
- write_short_reg(devrec, REG_BBREG1, val);
+ ret = spi_async(devrec->spi, &devrec->rx_msg);
+ if (ret) {
+ dev_err(printdev(devrec), "failed to read rx buffer length\n");
+ mrf24j40_handle_rx_read_buf_unlock(devrec);
+ }
+}
- return ret;
+static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
+{
+ /* Turn off reception of packets off the air. This prevents the
+ * device from overwriting the buffer while we're reading it.
+ */
+ devrec->rx_msg.complete = mrf24j40_handle_rx_read_len;
+ devrec->rx_trx.len = 2;
+ devrec->rx_buf[0] = MRF24J40_WRITESHORT(REG_BBREG1);
+ devrec->rx_buf[1] = 0x04; /* SET RXDECINV */
+
+ return spi_async(devrec->spi, &devrec->rx_msg);
}
static const struct ieee802154_ops mrf24j40_ops = {
@@ -1025,6 +955,29 @@ mrf24j40_setup_tx_spi_messages(struct mrf24j40 *devrec)
spi_message_add_tail(&devrec->tx_post_trx, &devrec->tx_post_msg);
}
+static void
+mrf24j40_setup_rx_spi_messages(struct mrf24j40 *devrec)
+{
+ spi_message_init(&devrec->rx_msg);
+ devrec->rx_msg.context = devrec;
+ devrec->rx_trx.len = 2;
+ devrec->rx_trx.tx_buf = devrec->rx_buf;
+ devrec->rx_trx.rx_buf = devrec->rx_buf;
+ spi_message_add_tail(&devrec->rx_trx, &devrec->rx_msg);
+
+ spi_message_init(&devrec->rx_buf_msg);
+ devrec->rx_buf_msg.context = devrec;
+ devrec->rx_buf_msg.complete = mrf24j40_handle_rx_read_buf_complete;
+ devrec->rx_addr_trx.len = 2;
+ devrec->rx_addr_trx.tx_buf = devrec->rx_addr_buf;
+ spi_message_add_tail(&devrec->rx_addr_trx, &devrec->rx_buf_msg);
+ devrec->rx_fifo_buf_trx.rx_buf = devrec->rx_fifo_buf;
+ spi_message_add_tail(&devrec->rx_fifo_buf_trx, &devrec->rx_buf_msg);
+ devrec->rx_lqi_trx.len = 2;
+ devrec->rx_lqi_trx.rx_buf = devrec->rx_lqi_buf;
+ spi_message_add_tail(&devrec->rx_lqi_trx, &devrec->rx_buf_msg);
+}
+
static void mrf24j40_phy_setup(struct mrf24j40 *devrec)
{
ieee802154_random_extended_addr(&devrec->hw->phy->perm_extended_addr);
@@ -1054,6 +1007,7 @@ static int mrf24j40_probe(struct spi_device *spi)
devrec->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT;
mrf24j40_setup_tx_spi_messages(devrec);
+ mrf24j40_setup_rx_spi_messages(devrec);
devrec->regmap_short = devm_regmap_init_spi(spi,
&mrf24j40_short_regmap);