diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/hp100.c | |
| download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/hp100.c')
| -rw-r--r-- | drivers/net/hp100.c | 3115 |
1 files changed, 3115 insertions, 0 deletions
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c new file mode 100644 index 000000000000..acb170152bbd --- /dev/null +++ b/drivers/net/hp100.c @@ -0,0 +1,3115 @@ +/* +** hp100.c +** HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters +** +** $Id: hp100.c,v 1.58 2001/09/24 18:03:01 perex Exp perex $ +** +** Based on the HP100 driver written by Jaroslav Kysela <perex@jcu.cz> +** Extended for new busmaster capable chipsets by +** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de> +** +** Maintained by: Jaroslav Kysela <perex@suse.cz> +** +** This driver has only been tested with +** -- HP J2585B 10/100 Mbit/s PCI Busmaster +** -- HP J2585A 10/100 Mbit/s PCI +** -- HP J2970 10 Mbit/s PCI Combo 10base-T/BNC +** -- HP J2973 10 Mbit/s PCI 10base-T +** -- HP J2573 10/100 ISA +** -- Compex ReadyLink ENET100-VG4 10/100 Mbit/s PCI / EISA +** -- Compex FreedomLine 100/VG 10/100 Mbit/s ISA / EISA / PCI +** +** but it should also work with the other CASCADE based adapters. +** +** TODO: +** - J2573 seems to hang sometimes when in shared memory mode. +** - Mode for Priority TX +** - Check PCI registers, performance might be improved? +** - To reduce interrupt load in busmaster, one could switch off +** the interrupts that are used to refill the queues whenever the +** queues are filled up to more than a certain threshold. +** - some updates for EISA version of card +** +** +** This code is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** This code is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +** +** You should have received a copy of the GNU General Public License +** along with this program; if not, write to the Free Software +** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** 1.57c -> 1.58 +** - used indent to change coding-style +** - added KTI DP-200 EISA ID +** - ioremap is also used for low (<1MB) memory (multi-architecture support) +** +** 1.57b -> 1.57c - Arnaldo Carvalho de Melo <acme@conectiva.com.br> +** - release resources on failure in init_module +** +** 1.57 -> 1.57b - Jean II +** - fix spinlocks, SMP is now working ! +** +** 1.56 -> 1.57 +** - updates for new PCI interface for 2.1 kernels +** +** 1.55 -> 1.56 +** - removed printk in misc. interrupt and update statistics to allow +** monitoring of card status +** - timing changes in xmit routines, relogin to 100VG hub added when +** driver does reset +** - included fix for Compex FreedomLine PCI adapter +** +** 1.54 -> 1.55 +** - fixed bad initialization in init_module +** - added Compex FreedomLine adapter +** - some fixes in card initialization +** +** 1.53 -> 1.54 +** - added hardware multicast filter support (doesn't work) +** - little changes in hp100_sense_lan routine +** - added support for Coax and AUI (J2970) +** - fix for multiple cards and hp100_mode parameter (insmod) +** - fix for shared IRQ +** +** 1.52 -> 1.53 +** - fixed bug in multicast support +** +*/ + +#define HP100_DEFAULT_PRIORITY_TX 0 + +#undef HP100_DEBUG +#undef HP100_DEBUG_B /* Trace */ +#undef HP100_DEBUG_BM /* Debug busmaster code (PDL stuff) */ + +#undef HP100_DEBUG_TRAINING /* Debug login-to-hub procedure */ +#undef HP100_DEBUG_TX +#undef HP100_DEBUG_IRQ +#undef HP100_DEBUG_RX + +#undef HP100_MULTICAST_FILTER /* Need to be debugged... */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/eisa.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/types.h> +#include <linux/config.h> /* for CONFIG_PCI */ +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/bitops.h> + +#include <asm/io.h> + +#include "hp100.h" + +/* + * defines + */ + +#define HP100_BUS_ISA 0 +#define HP100_BUS_EISA 1 +#define HP100_BUS_PCI 2 + +#define HP100_REGION_SIZE 0x20 /* for ioports */ +#define HP100_SIG_LEN 8 /* same as EISA_SIG_LEN */ + +#define HP100_MAX_PACKET_SIZE (1536+4) +#define HP100_MIN_PACKET_SIZE 60 + +#ifndef HP100_DEFAULT_RX_RATIO +/* default - 75% onboard memory on the card are used for RX packets */ +#define HP100_DEFAULT_RX_RATIO 75 +#endif + +#ifndef HP100_DEFAULT_PRIORITY_TX +/* default - don't enable transmit outgoing packets as priority */ +#define HP100_DEFAULT_PRIORITY_TX 0 +#endif + +/* + * structures + */ + +struct hp100_private { + spinlock_t lock; + char id[HP100_SIG_LEN]; + u_short chip; + u_short soft_model; + u_int memory_size; + u_int virt_memory_size; + u_short rx_ratio; /* 1 - 99 */ + u_short priority_tx; /* != 0 - priority tx */ + u_short mode; /* PIO, Shared Mem or Busmaster */ + u_char bus; + struct pci_dev *pci_dev; + short mem_mapped; /* memory mapped access */ + void __iomem *mem_ptr_virt; /* virtual memory mapped area, maybe NULL */ + unsigned long mem_ptr_phys; /* physical memory mapped area */ + short lan_type; /* 10Mb/s, 100Mb/s or -1 (error) */ + int hub_status; /* was login to hub successful? */ + u_char mac1_mode; + u_char mac2_mode; + u_char hash_bytes[8]; + struct net_device_stats stats; + + /* Rings for busmaster mode: */ + hp100_ring_t *rxrhead; /* Head (oldest) index into rxring */ + hp100_ring_t *rxrtail; /* Tail (newest) index into rxring */ + hp100_ring_t *txrhead; /* Head (oldest) index into txring */ + hp100_ring_t *txrtail; /* Tail (newest) index into txring */ + + hp100_ring_t rxring[MAX_RX_PDL]; + hp100_ring_t txring[MAX_TX_PDL]; + + u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */ + u_long whatever_offset; /* Offset to bus/phys/dma address */ + int rxrcommit; /* # Rx PDLs commited to adapter */ + int txrcommit; /* # Tx PDLs commited to adapter */ +}; + +/* + * variables + */ +static const char *hp100_isa_tbl[] = { + "HWPF150", /* HP J2573 rev A */ + "HWP1950", /* HP J2573 */ +}; + +#ifdef CONFIG_EISA +static struct eisa_device_id hp100_eisa_tbl[] = { + { "HWPF180" }, /* HP J2577 rev A */ + { "HWP1920" }, /* HP 27248B */ + { "HWP1940" }, /* HP J2577 */ + { "HWP1990" }, /* HP J2577 */ + { "CPX0301" }, /* ReadyLink ENET100-VG4 */ + { "CPX0401" }, /* FreedomLine 100/VG */ + { "" } /* Mandatory final entry ! */ +}; +MODULE_DEVICE_TABLE(eisa, hp100_eisa_tbl); +#endif + +#ifdef CONFIG_PCI +static struct pci_device_id hp100_pci_tbl[] = { + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585A, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2585B, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2970A, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_J2973A, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_COMPEX, PCI_DEVICE_ID_COMPEX_ENET100VG4, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_COMPEX2, PCI_DEVICE_ID_COMPEX2_100VG, PCI_ANY_ID, PCI_ANY_ID,}, +/* {PCI_VENDOR_ID_KTI, PCI_DEVICE_ID_KTI_DP200, PCI_ANY_ID, PCI_ANY_ID }, */ + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(pci, hp100_pci_tbl); +#endif + +static int hp100_rx_ratio = HP100_DEFAULT_RX_RATIO; +static int hp100_priority_tx = HP100_DEFAULT_PRIORITY_TX; +static int hp100_mode = 1; + +module_param(hp100_rx_ratio, int, 0); +module_param(hp100_priority_tx, int, 0); +module_param(hp100_mode, int, 0); + +/* + * prototypes + */ + +static int hp100_probe1(struct net_device *dev, int ioaddr, u_char bus, + struct pci_dev *pci_dev); + + +static int hp100_open(struct net_device *dev); +static int hp100_close(struct net_device *dev); +static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev); +static int hp100_start_xmit_bm(struct sk_buff *skb, + struct net_device *dev); +static void hp100_rx(struct net_device *dev); +static struct net_device_stats *hp100_get_stats(struct net_device *dev); +static void hp100_misc_interrupt(struct net_device *dev); +static void hp100_update_stats(struct net_device *dev); +static void hp100_clear_stats(struct hp100_private *lp, int ioaddr); +static void hp100_set_multicast_list(struct net_device *dev); +static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static void hp100_start_interface(struct net_device *dev); +static void hp100_stop_interface(struct net_device *dev); +static void hp100_load_eeprom(struct net_device *dev, u_short ioaddr); +static int hp100_sense_lan(struct net_device *dev); +static int hp100_login_to_vg_hub(struct net_device *dev, + u_short force_relogin); +static int hp100_down_vg_link(struct net_device *dev); +static void hp100_cascade_reset(struct net_device *dev, u_short enable); +static void hp100_BM_shutdown(struct net_device *dev); +static void hp100_mmuinit(struct net_device *dev); +static void hp100_init_pdls(struct net_device *dev); +static int hp100_init_rxpdl(struct net_device *dev, + register hp100_ring_t * ringptr, + register u_int * pdlptr); +static int hp100_init_txpdl(struct net_device *dev, + register hp100_ring_t * ringptr, + register u_int * pdlptr); +static void hp100_rxfill(struct net_device *dev); +static void hp100_hwinit(struct net_device *dev); +static void hp100_clean_txring(struct net_device *dev); +#ifdef HP100_DEBUG +static void hp100_RegisterDump(struct net_device *dev); +#endif + +/* Conversion to new PCI API : + * Convert an address in a kernel buffer to a bus/phys/dma address. + * This work *only* for memory fragments part of lp->page_vaddr, + * because it was properly DMA allocated via pci_alloc_consistent(), + * so we just need to "retreive" the original mapping to bus/phys/dma + * address - Jean II */ +static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr) +{ + struct hp100_private *lp = netdev_priv(dev); + return ((u_long) ptr) + lp->whatever_offset; +} + +static inline u_int pdl_map_data(struct hp100_private *lp, void *data) +{ + return pci_map_single(lp->pci_dev, data, + MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE); +} + +/* TODO: This function should not really be needed in a good design... */ +static void wait(void) +{ + mdelay(1); +} + +/* + * probe functions + * These functions should - if possible - avoid doing write operations + * since this could cause problems when the card is not installed. + */ + +/* + * Read board id and convert to string. + * Effectively same code as decode_eisa_sig + */ +static __devinit const char *hp100_read_id(int ioaddr) +{ + int i; + static char str[HP100_SIG_LEN]; + unsigned char sig[4], sum; + unsigned short rev; + + hp100_page(ID_MAC_ADDR); + sum = 0; + for (i = 0; i < 4; i++) { + sig[i] = hp100_inb(BOARD_ID + i); + sum += sig[i]; + } + + sum += hp100_inb(BOARD_ID + i); + if (sum != 0xff) + return NULL; /* bad checksum */ + + str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1); + str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1); + str[2] = (sig[1] & 0x1f) + ('A' - 1); + rev = (sig[2] << 8) | sig[3]; + sprintf(str + 3, "%04X", rev); + + return str; +} + +static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) +{ + const char *sig; + int i; + + if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100")) + goto err; + + if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE) { + release_region(ioaddr, HP100_REGION_SIZE); + goto err; + } + + sig = hp100_read_id(ioaddr); + release_region(ioaddr, HP100_REGION_SIZE); + + if (sig == NULL) + goto err; + + for (i = 0; i < ARRAY_SIZE(hp100_isa_tbl); i++) { + if (!strcmp(hp100_isa_tbl[i], sig)) + break; + + } + + if (i < ARRAY_SIZE(hp100_isa_tbl)) + return hp100_probe1(dev, ioaddr, HP100_BUS_ISA, NULL); + err: + return -ENODEV; + +} +/* + * Probe for ISA board. + * EISA and PCI are handled by device infrastructure. + */ + +static int __init hp100_isa_probe(struct net_device *dev, int addr) +{ + int err = -ENODEV; + + /* Probe for a specific ISA address */ + if (addr > 0xff && addr < 0x400) + err = hp100_isa_probe1(dev, addr); + + else if (addr != 0) + err = -ENXIO; + + else { + /* Probe all ISA possible port regions */ + for (addr = 0x100; addr < 0x400; addr += 0x20) { + err = hp100_isa_probe1(dev, addr); + if (!err) + break; + } + } + return err; +} + + +#ifndef MODULE +struct net_device * __init hp100_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); + int err; + + if (!dev) + return ERR_PTR(-ENODEV); + + SET_MODULE_OWNER(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4200, TRACE); + printk("hp100: %s: probe\n", dev->name); +#endif + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + + err = hp100_isa_probe(dev, dev->base_addr); + if (err) + goto out; + + err = register_netdev(dev); + if (err) + goto out1; + return dev; + out1: + release_region(dev->base_addr, HP100_REGION_SIZE); + out: + free_netdev(dev); + return ERR_PTR(err); +} +#endif + +static int __devinit hp100_probe1(struct net_device *dev, int ioaddr, + u_char bus, struct pci_dev *pci_dev) +{ + int i; + int err = -ENODEV; + const char *eid; + u_int chip; + u_char uc; + u_int memory_size = 0, virt_memory_size = 0; + u_short local_mode, lsw; + short mem_mapped; + unsigned long mem_ptr_phys; + void __iomem *mem_ptr_virt; + struct hp100_private *lp; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4201, TRACE); + printk("hp100: %s: probe1\n", dev->name); +#endif + + /* memory region for programmed i/o */ + if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100")) + goto out1; + + if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE) + goto out2; + + chip = hp100_inw(PAGING) & HP100_CHIPID_MASK; +#ifdef HP100_DEBUG + if (chip == HP100_CHIPID_SHASTA) + printk("hp100: %s: Shasta Chip detected. (This is a pre 802.12 chip)\n", dev->name); + else if (chip == HP100_CHIPID_RAINIER) + printk("hp100: %s: Rainier Chip detected. (This is a pre 802.12 chip)\n", dev->name); + else if (chip == HP100_CHIPID_LASSEN) + printk("hp100: %s: Lassen Chip detected.\n", dev->name); + else + printk("hp100: %s: Warning: Unknown CASCADE chip (id=0x%.4x).\n", dev->name, chip); +#endif + + dev->base_addr = ioaddr; + + eid = hp100_read_id(ioaddr); + if (eid == NULL) { /* bad checksum? */ + printk(KERN_WARNING "hp100_probe: bad ID checksum at base port 0x%x\n", ioaddr); + goto out2; + } + + hp100_page(ID_MAC_ADDR); + for (i = uc = 0; i < 7; i++) + uc += hp100_inb(LAN_ADDR + i); + if (uc != 0xff) { + printk(KERN_WARNING "hp100_probe: bad lan address checksum at port 0x%x)\n", ioaddr); + err = -EIO; + goto out2; + } + + /* Make sure, that all registers are correctly updated... */ + + hp100_load_eeprom(dev, ioaddr); + wait(); + + /* + * Determine driver operation mode + * + * Use the variable "hp100_mode" upon insmod or as kernel parameter to + * force driver modes: + * hp100_mode=1 -> default, use busmaster mode if configured. + * hp100_mode=2 -> enable shared memory mode + * hp100_mode=3 -> force use of i/o mapped mode. + * hp100_mode=4 -> same as 1, but re-set the enable bit on the card. + */ + + /* + * LSW values: + * 0x2278 -> J2585B, PnP shared memory mode + * 0x2270 -> J2585B, shared memory mode, 0xdc000 + * 0xa23c -> J2585B, I/O mapped mode + * 0x2240 -> EISA COMPEX, BusMaster (Shasta Chip) + * 0x2220 -> EISA HP, I/O (Shasta Chip) + * 0x2260 -> EISA HP, BusMaster (Shasta Chip) + */ + +#if 0 + local_mode = 0x2270; + hp100_outw(0xfefe, OPTION_LSW); + hp100_outw(local_mode | HP100_SET_LB | HP100_SET_HB, OPTION_LSW); +#endif + + /* hp100_mode value maybe used in future by another card */ + local_mode = hp100_mode; + if (local_mode < 1 || local_mode > 4) + local_mode = 1; /* default */ +#ifdef HP100_DEBUG + printk("hp100: %s: original LSW = 0x%x\n", dev->name, + hp100_inw(OPTION_LSW)); +#endif + + if (local_mode == 3) { + hp100_outw(HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW); + hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW); + hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW); + printk("hp100: IO mapped mode forced.\n"); + } else if (local_mode == 2) { + hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW); + hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW); + hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_RESET_HB, OPTION_LSW); + printk("hp100: Shared memory mode requested.\n"); + } else if (local_mode == 4) { + if (chip == HP100_CHIPID_LASSEN) { + hp100_outw(HP100_BM_WRITE | HP100_BM_READ | HP100_SET_HB, OPTION_LSW); + hp100_outw(HP100_IO_EN | HP100_MEM_EN | HP100_RESET_LB, OPTION_LSW); + printk("hp100: Busmaster mode requested.\n"); + } + local_mode = 1; + } + + if (local_mode == 1) { /* default behaviour */ + lsw = hp100_inw(OPTION_LSW); + + if ((lsw & HP100_IO_EN) && (~lsw & HP100_MEM_EN) && + (~lsw & (HP100_BM_WRITE | HP100_BM_READ))) { +#ifdef HP100_DEBUG + printk("hp100: %s: IO_EN bit is set on card.\n", dev->name); +#endif + local_mode = 3; + } else if (chip == HP100_CHIPID_LASSEN && + (lsw & (HP100_BM_WRITE | HP100_BM_READ)) == (HP100_BM_WRITE | HP100_BM_READ)) { + /* Conversion to new PCI API : + * I don't have the doc, but I assume that the card + * can map the full 32bit address space. + * Also, we can have EISA Busmaster cards (not tested), + * so beware !!! - Jean II */ + if((bus == HP100_BUS_PCI) && + (pci_set_dma_mask(pci_dev, 0xffffffff))) { + /* Gracefully fallback to shared memory */ + goto busmasterfail; + } + printk("hp100: Busmaster mode enabled.\n"); + hp100_outw(HP100_MEM_EN | HP100_IO_EN | HP100_RESET_LB, OPTION_LSW); + } else { + busmasterfail: +#ifdef HP100_DEBUG + printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name); + printk("hp100: %s: Trying shared memory mode.\n", dev->name); +#endif + /* In this case, try shared memory mode */ + local_mode = 2; + hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW); + /* hp100_outw(HP100_IO_EN|HP100_RESET_LB, OPTION_LSW); */ + } + } +#ifdef HP100_DEBUG + printk("hp100: %s: new LSW = 0x%x\n", dev->name, hp100_inw(OPTION_LSW)); +#endif + + /* Check for shared memory on the card, eventually remap it */ + hp100_page(HW_MAP); + mem_mapped = ((hp100_inw(OPTION_LSW) & (HP100_MEM_EN)) != 0); + mem_ptr_phys = 0UL; + mem_ptr_virt = NULL; + memory_size = (8192 << ((hp100_inb(SRAM) >> 5) & 0x07)); + virt_memory_size = 0; + + /* For memory mapped or busmaster mode, we want the memory address */ + if (mem_mapped || (local_mode == 1)) { + mem_ptr_phys = (hp100_inw(MEM_MAP_LSW) | (hp100_inw(MEM_MAP_MSW) << 16)); + mem_ptr_phys &= ~0x1fff; /* 8k alignment */ + + if (bus == HP100_BUS_ISA && (mem_ptr_phys & ~0xfffff) != 0) { + printk("hp100: Can only use programmed i/o mode.\n"); + mem_ptr_phys = 0; + mem_mapped = 0; + local_mode = 3; /* Use programmed i/o */ + } + + /* We do not need access to shared memory in busmaster mode */ + /* However in slave mode we need to remap high (>1GB) card memory */ + if (local_mode != 1) { /* = not busmaster */ + /* We try with smaller memory sizes, if ioremap fails */ + for (virt_memory_size = memory_size; virt_memory_size > 16383; virt_memory_size >>= 1) { + if ((mem_ptr_virt = ioremap((u_long) mem_ptr_phys, virt_memory_size)) == NULL) { +#ifdef HP100_DEBUG + printk("hp100: %s: ioremap for 0x%x bytes high PCI memory at 0x%lx failed\n", dev->name, virt_memory_size, mem_ptr_phys); +#endif + } else { +#ifdef HP100_DEBUG + printk("hp100: %s: remapped 0x%x bytes high PCI memory at 0x%lx to %p.\n", dev->name, virt_memory_size, mem_ptr_phys, mem_ptr_virt); +#endif + break; + } + } + + if (mem_ptr_virt == NULL) { /* all ioremap tries failed */ + printk("hp100: Failed to ioremap the PCI card memory. Will have to use i/o mapped mode.\n"); + local_mode = 3; + virt_memory_size = 0; + } + } + } + + if (local_mode == 3) { /* io mapped forced */ + mem_mapped = 0; + mem_ptr_phys = 0; + mem_ptr_virt = NULL; + printk("hp100: Using (slow) programmed i/o mode.\n"); + } + + /* Initialise the "private" data structure for this card. */ + lp = netdev_priv(dev); + + spin_lock_init(&lp->lock); + strlcpy(lp->id, eid, HP100_SIG_LEN); + lp->chip = chip; + lp->mode = local_mode; + lp->bus = bus; + lp->pci_dev = pci_dev; + lp->priority_tx = hp100_priority_tx; + lp->rx_ratio = hp100_rx_ratio; + lp->mem_ptr_phys = mem_ptr_phys; + lp->mem_ptr_virt = mem_ptr_virt; + hp100_page(ID_MAC_ADDR); + lp->soft_model = hp100_inb(SOFT_MODEL); + lp->mac1_mode = HP100_MAC1MODE3; + lp->mac2_mode = HP100_MAC2MODE3; + memset(&lp->hash_bytes, 0x00, 8); + + dev->base_addr = ioaddr; + + lp->memory_size = memory_size; + lp->virt_memory_size = virt_memory_size; + lp->rx_ratio = hp100_rx_ratio; /* can be conf'd with insmod */ + + dev->open = hp100_open; + dev->stop = hp100_close; + + if (lp->mode == 1) /* busmaster */ + dev->hard_start_xmit = hp100_start_xmit_bm; + else + dev->hard_start_xmit = hp100_start_xmit; + + dev->get_stats = hp100_get_stats; + dev->set_multicast_list = &hp100_set_multicast_list; + + /* Ask the card for which IRQ line it is configured */ + if (bus == HP100_BUS_PCI) { + dev->irq = pci_dev->irq; + } else { + hp100_page(HW_MAP); + dev->irq = hp100_inb(IRQ_CHANNEL) & HP100_IRQMASK; + if (dev->irq == 2) + dev->irq = 9; + } + + if (lp->mode == 1) /* busmaster */ + dev->dma = 4; + + /* Ask the card for its MAC address and store it for later use. */ + hp100_page(ID_MAC_ADDR); + for (i = uc = 0; i < 6; i++) + dev->dev_addr[i] = hp100_inb(LAN_ADDR + i); + + /* Reset statistics (counters) */ + hp100_clear_stats(lp, ioaddr); + + /* If busmaster mode is wanted, a dma-capable memory area is needed for + * the rx and tx PDLs + * PCI cards can access the whole PC memory. Therefore GFP_DMA is not + * needed for the allocation of the memory area. + */ + + /* TODO: We do not need this with old cards, where PDLs are stored + * in the cards shared memory area. But currently, busmaster has been + * implemented/tested only with the lassen chip anyway... */ + if (lp->mode == 1) { /* busmaster */ + dma_addr_t page_baddr; + /* Get physically continous memory for TX & RX PDLs */ + /* Conversion to new PCI API : + * Pages are always aligned and zeroed, no need to it ourself. + * Doc says should be OK for EISA bus as well - Jean II */ + if ((lp->page_vaddr_algn = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &page_baddr)) == NULL) { + err = -ENOMEM; + goto out2; + } + lp->whatever_offset = ((u_long) page_baddr) - ((u_long) lp->page_vaddr_algn); + +#ifdef HP100_DEBUG_BM + printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE); +#endif + lp->rxrcommit = lp->txrcommit = 0; + lp->rxrhead = lp->rxrtail = &(lp->rxring[0]); + lp->txrhead = lp->txrtail = &(lp->txring[0]); + } + + /* Initialise the card. */ + /* (I'm not really sure if it's a good idea to do this during probing, but + * like this it's assured that the lan connection type can be sensed + * correctly) + */ + hp100_hwinit(dev); + + /* Try to find out which kind of LAN the card is connected to. */ + lp->lan_type = hp100_sense_lan(dev); + + /* Print out a message what about what we think we have probed. */ + printk("hp100: at 0x%x, IRQ %d, ", ioaddr, dev->irq); + switch (bus) { + case HP100_BUS_EISA: + printk("EISA"); + break; + case HP100_BUS_PCI: + printk("PCI"); + break; + default: + printk("ISA"); + break; + } + printk(" bus, %dk SRAM (rx/tx %d%%).\n", lp->memory_size >> 10, lp->rx_ratio); + + if (lp->mode == 2) { /* memory mapped */ + printk("hp100: Memory area at 0x%lx-0x%lx", mem_ptr_phys, + (mem_ptr_phys + (mem_ptr_phys > 0x100000 ? (u_long) lp->memory_size : 16 * 1024)) - 1); + if (mem_ptr_virt) + printk(" (virtual base %p)", mem_ptr_virt); + printk(".\n"); + + /* Set for info when doing ifconfig */ + dev->mem_start = mem_ptr_phys; + dev->mem_end = mem_ptr_phys + lp->memory_size; + } + + printk("hp100: "); + if (lp->lan_type != HP100_LAN_ERR) + printk("Adapter is attached to "); + switch (lp->lan_type) { + case HP100_LAN_100: + printk("100Mb/s Voice Grade AnyLAN network.\n"); + break; + case HP100_LAN_10: + printk("10Mb/s network (10baseT).\n"); + break; + case HP100_LAN_COAX: + printk("10Mb/s network (coax).\n"); + break; + default: + printk("Warning! Link down.\n"); + } + + return 0; +out2: + release_region(ioaddr, HP100_REGION_SIZE); +out1: + return -ENODEV; +} + +/* This procedure puts the card into a stable init state */ +static void hp100_hwinit(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4202, TRACE); + printk("hp100: %s: hwinit\n", dev->name); +#endif + + /* Initialise the card. -------------------------------------------- */ + + /* Clear all pending Ints and disable Ints */ + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ + hp100_outw(0xffff, IRQ_STATUS); /* clear all pending ints */ + + hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW); + hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW); + + if (lp->mode == 1) { + hp100_BM_shutdown(dev); /* disables BM, puts cascade in reset */ + wait(); + } else { + hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW); + hp100_cascade_reset(dev, 1); + hp100_page(MAC_CTRL); + hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); + } + + /* Initiate EEPROM reload */ + hp100_load_eeprom(dev, 0); + + wait(); + + /* Go into reset again. */ + hp100_cascade_reset(dev, 1); + + /* Set Option Registers to a safe state */ + hp100_outw(HP100_DEBUG_EN | + HP100_RX_HDR | + HP100_EE_EN | + HP100_BM_WRITE | + HP100_BM_READ | HP100_RESET_HB | + HP100_FAKE_INT | + HP100_INT_EN | + HP100_MEM_EN | + HP100_IO_EN | HP100_RESET_LB, OPTION_LSW); + + hp100_outw(HP100_TRI_INT | + HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW); + + hp100_outb(HP100_PRIORITY_TX | + HP100_ADV_NXT_PKT | + HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW); + + /* TODO: Configure MMU for Ram Test. */ + /* TODO: Ram Test. */ + + /* Re-check if adapter is still at same i/o location */ + /* (If the base i/o in eeprom has been changed but the */ + /* registers had not been changed, a reload of the eeprom */ + /* would move the adapter to the address stored in eeprom */ + + /* TODO: Code to implement. */ + + /* Until here it was code from HWdiscover procedure. */ + /* Next comes code from mmuinit procedure of SCO BM driver which is + * called from HWconfigure in the SCO driver. */ + + /* Initialise MMU, eventually switch on Busmaster Mode, initialise + * multicast filter... + */ + hp100_mmuinit(dev); + + /* We don't turn the interrupts on here - this is done by start_interface. */ + wait(); /* TODO: Do we really need this? */ + + /* Enable Hardware (e.g. unreset) */ + hp100_cascade_reset(dev, 0); + + /* ------- initialisation complete ----------- */ + + /* Finally try to log in the Hub if there may be a VG connection. */ + if ((lp->lan_type == HP100_LAN_100) || (lp->lan_type == HP100_LAN_ERR)) + hp100_login_to_vg_hub(dev, 0); /* relogin */ + +} + + +/* + * mmuinit - Reinitialise Cascade MMU and MAC settings. + * Note: Must already be in reset and leaves card in reset. + */ +static void hp100_mmuinit(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + int i; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4203, TRACE); + printk("hp100: %s: mmuinit\n", dev->name); +#endif + +#ifdef HP100_DEBUG + if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) { + printk("hp100: %s: Not in reset when entering mmuinit. Fix me.\n", dev->name); + return; + } +#endif + + /* Make sure IRQs are masked off and ack'ed. */ + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ + hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */ + + /* + * Enable Hardware + * - Clear Debug En, Rx Hdr Pipe, EE En, I/O En, Fake Int and Intr En + * - Set Tri-State Int, Bus Master Rd/Wr, and Mem Map Disable + * - Clear Priority, Advance Pkt and Xmit Cmd + */ + + hp100_outw(HP100_DEBUG_EN | + HP100_RX_HDR | + HP100_EE_EN | HP100_RESET_HB | + HP100_IO_EN | + HP100_FAKE_INT | + HP100_INT_EN | HP100_RESET_LB, OPTION_LSW); + + hp100_outw(HP100_TRI_INT | HP100_SET_HB, OPTION_LSW); + + if (lp->mode == 1) { /* busmaster */ + hp100_outw(HP100_BM_WRITE | + HP100_BM_READ | + HP100_MMAP_DIS | HP100_SET_HB, OPTION_LSW); + } else if (lp->mode == 2) { /* memory mapped */ + hp100_outw(HP100_BM_WRITE | + HP100_BM_READ | HP100_RESET_HB, OPTION_LSW); + hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW); + hp100_outw(HP100_MEM_EN | HP100_SET_LB, OPTION_LSW); + hp100_outw(HP100_IO_EN | HP100_SET_LB, OPTION_LSW); + } else if (lp->mode == 3) { /* i/o mapped mode */ + hp100_outw(HP100_MMAP_DIS | HP100_SET_HB | + HP100_IO_EN | HP100_SET_LB, OPTION_LSW); + } + + hp100_page(HW_MAP); + hp100_outb(0, EARLYRXCFG); + hp100_outw(0, EARLYTXCFG); + + /* + * Enable Bus Master mode + */ + if (lp->mode == 1) { /* busmaster */ + /* Experimental: Set some PCI configuration bits */ + hp100_page(HW_MAP); + hp100_andb(~HP100_PDL_USE3, MODECTRL1); /* BM engine read maximum */ + hp100_andb(~HP100_TX_DUALQ, MODECTRL1); /* No Queue for Priority TX */ + + /* PCI Bus failures should result in a Misc. Interrupt */ + hp100_orb(HP100_EN_BUS_FAIL, MODECTRL2); + + hp100_outw(HP100_BM_READ | HP100_BM_WRITE | HP100_SET_HB, OPTION_LSW); + hp100_page(HW_MAP); + /* Use Burst Mode and switch on PAGE_CK */ + hp100_orb(HP100_BM_BURST_RD | HP100_BM_BURST_WR, BM); + if ((lp->chip == HP100_CHIPID_RAINIER) || (lp->chip == HP100_CHIPID_SHASTA)) + hp100_orb(HP100_BM_PAGE_CK, BM); + hp100_orb(HP100_BM_MASTER, BM); + } else { /* not busmaster */ + + hp100_page(HW_MAP); + hp100_andb(~HP100_BM_MASTER, BM); + } + + /* + * Divide card memory into regions for Rx, Tx and, if non-ETR chip, PDLs + */ + hp100_page(MMU_CFG); + if (lp->mode == 1) { /* only needed for Busmaster */ + int xmit_stop, recv_stop; + + if ((lp->chip == HP100_CHIPID_RAINIER) + || (lp->chip == HP100_CHIPID_SHASTA)) { + int pdl_stop; + + /* + * Each pdl is 508 bytes long. (63 frags * 4 bytes for address and + * 4 bytes for header). We will leave NUM_RXPDLS * 508 (rounded + * to the next higher 1k boundary) bytes for the rx-pdl's + * Note: For non-etr chips the transmit stop register must be + * programmed on a 1k boundary, i.e. bits 9:0 must be zero. + */ + pdl_stop = lp->memory_size; + xmit_stop = (pdl_stop - 508 * (MAX_RX_PDL) - 16) & ~(0x03ff); + recv_stop = (xmit_stop * (lp->rx_ratio) / 100) & ~(0x03ff); + hp100_outw((pdl_stop >> 4) - 1, PDL_MEM_STOP); +#ifdef HP100_DEBUG_BM + printk("hp100: %s: PDL_STOP = 0x%x\n", dev->name, pdl_stop); +#endif + } else { + /* ETR chip (Lassen) in busmaster mode */ + xmit_stop = (lp->memory_size) - 1; + recv_stop = ((lp->memory_size * lp->rx_ratio) / 100) & ~(0x03ff); + } + + hp100_outw(xmit_stop >> 4, TX_MEM_STOP); + hp100_outw(recv_stop >> 4, RX_MEM_STOP); +#ifdef HP100_DEBUG_BM + printk("hp100: %s: TX_STOP = 0x%x\n", dev->name, xmit_stop >> 4); + printk("hp100: %s: RX_STOP = 0x%x\n", dev->name, recv_stop >> 4); +#endif + } else { + /* Slave modes (memory mapped and programmed io) */ + hp100_outw((((lp->memory_size * lp->rx_ratio) / 100) >> 4), RX_MEM_STOP); + hp100_outw(((lp->memory_size - 1) >> 4), TX_MEM_STOP); +#ifdef HP100_DEBUG + printk("hp100: %s: TX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(TX_MEM_STOP)); + printk("hp100: %s: RX_MEM_STOP: 0x%x\n", dev->name, hp100_inw(RX_MEM_STOP)); +#endif + } + + /* Write MAC address into page 1 */ + hp100_page(MAC_ADDRESS); + for (i = 0; i < 6; i++) + hp100_outb(dev->dev_addr[i], MAC_ADDR + i); + + /* Zero the multicast hash registers */ + for (i = 0; i < 8; i++) + hp100_outb(0x0, HASH_BYTE0 + i); + + /* Set up MAC defaults */ + hp100_page(MAC_CTRL); + + /* Go to LAN Page and zero all filter bits */ + /* Zero accept error, accept multicast, accept broadcast and accept */ + /* all directed packet bits */ + hp100_andb(~(HP100_RX_EN | + HP100_TX_EN | + HP100_ACC_ERRORED | + HP100_ACC_MC | + HP100_ACC_BC | HP100_ACC_PHY), MAC_CFG_1); + + hp100_outb(0x00, MAC_CFG_2); + + /* Zero the frame format bit. This works around a training bug in the */ + /* new hubs. */ + hp100_outb(0x00, VG_LAN_CFG_2); /* (use 802.3) */ + + if (lp->priority_tx) + hp100_outb(HP100_PRIORITY_TX | HP100_SET_LB, OPTION_MSW); + else + hp100_outb(HP100_PRIORITY_TX | HP100_RESET_LB, OPTION_MSW); + + hp100_outb(HP100_ADV_NXT_PKT | + HP100_TX_CMD | HP100_RESET_LB, OPTION_MSW); + + /* If busmaster, initialize the PDLs */ + if (lp->mode == 1) + hp100_init_pdls(dev); + + /* Go to performance page and initalize isr and imr registers */ + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ + hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */ +} + +/* + * open/close functions + */ + +static int hp100_open(struct net_device *dev) +{ + struct hp100_private *lp = netdev_priv(dev); +#ifdef HP100_DEBUG_B + int ioaddr = dev->base_addr; +#endif + +#ifdef HP100_DEBUG_B + hp100_outw(0x4204, TRACE); + printk("hp100: %s: open\n", dev->name); +#endif + + /* New: if bus is PCI or EISA, interrupts might be shared interrupts */ + if (request_irq(dev->irq, hp100_interrupt, + lp->bus == HP100_BUS_PCI || lp->bus == + HP100_BUS_EISA ? SA_SHIRQ : SA_INTERRUPT, + "hp100", dev)) { + printk("hp100: %s: unable to get IRQ %d\n", dev->name, dev->irq); + return -EAGAIN; + } + + dev->trans_start = jiffies; + netif_start_queue(dev); + + lp->lan_type = hp100_sense_lan(dev); + lp->mac1_mode = HP100_MAC1MODE3; + lp->mac2_mode = HP100_MAC2MODE3; + memset(&lp->hash_bytes, 0x00, 8); + + hp100_stop_interface(dev); + + hp100_hwinit(dev); + + hp100_start_interface(dev); /* sets mac modes, enables interrupts */ + + return 0; +} + +/* The close function is called when the interface is to be brought down */ +static int hp100_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4205, TRACE); + printk("hp100: %s: close\n", dev->name); +#endif + + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all IRQs */ + + hp100_stop_interface(dev); + + if (lp->lan_type == HP100_LAN_100) + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + + netif_stop_queue(dev); + + free_irq(dev->irq, dev); + +#ifdef HP100_DEBUG + printk("hp100: %s: close LSW = 0x%x\n", dev->name, + hp100_inw(OPTION_LSW)); +#endif + + return 0; +} + + +/* + * Configure the PDL Rx rings and LAN + */ +static void hp100_init_pdls(struct net_device *dev) +{ + struct hp100_private *lp = netdev_priv(dev); + hp100_ring_t *ringptr; + u_int *pageptr; /* Warning : increment by 4 - Jean II */ + int i; + +#ifdef HP100_DEBUG_B + int ioaddr = dev->base_addr; +#endif + +#ifdef HP100_DEBUG_B + hp100_outw(0x4206, TRACE); + printk("hp100: %s: init pdls\n", dev->name); +#endif + + if (0 == lp->page_vaddr_algn) + printk("hp100: %s: Warning: lp->page_vaddr_algn not initialised!\n", dev->name); + else { + /* pageptr shall point into the DMA accessible memory region */ + /* we use this pointer to status the upper limit of allocated */ + /* memory in the allocated page. */ + /* note: align the pointers to the pci cache line size */ + memset(lp->page_vaddr_algn, 0, MAX_RINGSIZE); /* Zero Rx/Tx ring page */ + pageptr = lp->page_vaddr_algn; + + lp->rxrcommit = 0; + ringptr = lp->rxrhead = lp->rxrtail = &(lp->rxring[0]); + + /* Initialise Rx Ring */ + for (i = MAX_RX_PDL - 1; i >= 0; i--) { + lp->rxring[i].next = ringptr; + ringptr = &(lp->rxring[i]); + pageptr += hp100_init_rxpdl(dev, ringptr, pageptr); + } + + /* Initialise Tx Ring */ + lp->txrcommit = 0; + ringptr = lp->txrhead = lp->txrtail = &(lp->txring[0]); + for (i = MAX_TX_PDL - 1; i >= 0; i--) { + lp->txring[i].next = ringptr; + ringptr = &(lp->txring[i]); + pageptr += hp100_init_txpdl(dev, ringptr, pageptr); + } + } +} + + +/* These functions "format" the entries in the pdl structure */ +/* They return how much memory the fragments need. */ +static int hp100_init_rxpdl(struct net_device *dev, + register hp100_ring_t * ringptr, + register u32 * pdlptr) +{ + /* pdlptr is starting address for this pdl */ + + if (0 != (((unsigned long) pdlptr) & 0xf)) + printk("hp100: %s: Init rxpdl: Unaligned pdlptr 0x%lx.\n", + dev->name, (unsigned long) pdlptr); + + ringptr->pdl = pdlptr + 1; + ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1); + ringptr->skb = (void *) NULL; + + /* + * Write address and length of first PDL Fragment (which is used for + * storing the RX-Header + * We use the 4 bytes _before_ the PDH in the pdl memory area to + * store this information. (PDH is at offset 0x04) + */ + /* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */ + + *(pdlptr + 2) = (u_int) virt_to_whatever(dev, pdlptr); /* Address Frag 1 */ + *(pdlptr + 3) = 4; /* Length Frag 1 */ + + return ((((MAX_RX_FRAG * 2 + 2) + 3) / 4) * 4); +} + + +static int hp100_init_txpdl(struct net_device *dev, + register hp100_ring_t * ringptr, + register u32 * pdlptr) +{ + if (0 != (((unsigned long) pdlptr) & 0xf)) + printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%lx.\n", dev->name, (unsigned long) pdlptr); + + ringptr->pdl = pdlptr; /* +1; */ + ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr); /* +1 */ + ringptr->skb = (void *) NULL; + + return ((((MAX_TX_FRAG * 2 + 2) + 3) / 4) * 4); +} + +/* + * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes + * for possible odd word alignment rounding up to next dword and set PDL + * address for fragment#2 + * Returns: 0 if unable to allocate skb_buff + * 1 if successful + */ +static int hp100_build_rx_pdl(hp100_ring_t * ringptr, + struct net_device *dev) +{ +#ifdef HP100_DEBUG_B + int ioaddr = dev->base_addr; +#endif +#ifdef HP100_DEBUG_BM + u_int *p; +#endif + +#ifdef HP100_DEBUG_B + hp100_outw(0x4207, TRACE); + printk("hp100: %s: build rx pdl\n", dev->name); +#endif + + /* Allocate skb buffer of maximum size */ + /* Note: This depends on the alloc_skb functions allocating more + * space than requested, i.e. aligning to 16bytes */ + + ringptr->skb = dev_alloc_skb(((MAX_ETHER_SIZE + 2 + 3) / 4) * 4); + + if (NULL != ringptr->skb) { + /* + * Reserve 2 bytes at the head of the buffer to land the IP header + * on a long word boundary (According to the Network Driver section + * in the Linux KHG, this should help to increase performance.) + */ + skb_reserve(ringptr->skb, 2); + + ringptr->skb->dev = dev; + ringptr->skb->data = (u_char *) skb_put(ringptr->skb, MAX_ETHER_SIZE); + + /* ringptr->pdl points to the beginning of the PDL, i.e. the PDH */ + /* Note: 1st Fragment is used for the 4 byte packet status + * (receive header). Its PDL entries are set up by init_rxpdl. So + * here we only have to set up the PDL fragment entries for the data + * part. Those 4 bytes will be stored in the DMA memory region + * directly before the PDL. + */ +#ifdef HP100_DEBUG_BM + printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n", + dev->name, (u_int) ringptr->pdl, + ((MAX_ETHER_SIZE + 2 + 3) / 4) * 4, + (unsigned int) ringptr->skb->data); +#endif + + /* Conversion to new PCI API : map skbuf data to PCI bus. + * Doc says it's OK for EISA as well - Jean II */ + ringptr->pdl[0] = 0x00020000; /* Write PDH */ + ringptr->pdl[3] = pdl_map_data(netdev_priv(dev), + ringptr->skb->data); + ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */ + +#ifdef HP100_DEBUG_BM + for (p = (ringptr->pdl); p < (ringptr->pdl + 5); p++) + printk("hp100: %s: Adr 0x%.8x = 0x%.8x\n", dev->name, (u_int) p, (u_int) * p); +#endif + return (1); + } + /* else: */ + /* alloc_skb failed (no memory) -> still can receive the header + * fragment into PDL memory. make PDL safe by clearing msgptr and + * making the PDL only 1 fragment (i.e. the 4 byte packet status) + */ +#ifdef HP100_DEBUG_BM + printk("hp100: %s: build_rx_pdl: PDH@0x%x, No space for skb.\n", dev->name, (u_int) ringptr->pdl); +#endif + + ringptr->pdl[0] = 0x00010000; /* PDH: Count=1 Fragment */ + + return (0); +} + +/* + * hp100_rxfill - attempt to fill the Rx Ring will empty skb's + * + * Makes assumption that skb's are always contiguous memory areas and + * therefore PDLs contain only 2 physical fragments. + * - While the number of Rx PDLs with buffers is less than maximum + * a. Get a maximum packet size skb + * b. Put the physical address of the buffer into the PDL. + * c. Output physical address of PDL to adapter. + */ +static void hp100_rxfill(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + struct hp100_private *lp = netdev_priv(dev); + hp100_ring_t *ringptr; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4208, TRACE); + printk("hp100: %s: rxfill\n", dev->name); +#endif + + hp100_page(PERFORMANCE); + + while (lp->rxrcommit < MAX_RX_PDL) { + /* + ** Attempt to get a buffer and build a Rx PDL. + */ + ringptr = lp->rxrtail; + if (0 == hp100_build_rx_pdl(ringptr, dev)) { + return; /* None available, return */ + } + + /* Hand this PDL over to the card */ + /* Note: This needs performance page selected! */ +#ifdef HP100_DEBUG_BM + printk("hp100: %s: rxfill: Hand to card: pdl #%d @0x%x phys:0x%x, buffer: 0x%x\n", + dev->name, lp->rxrcommit, (u_int) ringptr->pdl, + (u_int) ringptr->pdl_paddr, (u_int) ringptr->pdl[3]); +#endif + + hp100_outl((u32) ringptr->pdl_paddr, RX_PDA); + + lp->rxrcommit += 1; + lp->rxrtail = ringptr->next; + } +} + +/* + * BM_shutdown - shutdown bus mastering and leave chip in reset state + */ + +static void hp100_BM_shutdown(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + unsigned long time; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4209, TRACE); + printk("hp100: %s: bm shutdown\n", dev->name); +#endif + + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ + hp100_outw(0xffff, IRQ_STATUS); /* Ack all ints */ + + /* Ensure Interrupts are off */ + hp100_outw(HP100_INT_EN | HP100_RESET_LB, OPTION_LSW); + + /* Disable all MAC activity */ + hp100_page(MAC_CTRL); + hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */ + + /* If cascade MMU is not already in reset */ + if (0 != (hp100_inw(OPTION_LSW) & HP100_HW_RST)) { + /* Wait 1.3ms (10Mb max packet time) to ensure MAC is idle so + * MMU pointers will not be reset out from underneath + */ + hp100_page(MAC_CTRL); + for (time = 0; time < 5000; time++) { + if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE)) + break; + } + + /* Shutdown algorithm depends on the generation of Cascade */ + if (lp->chip == HP100_CHIPID_LASSEN) { /* ETR shutdown/reset */ + /* Disable Busmaster mode and wait for bit to go to zero. */ + hp100_page(HW_MAP); + hp100_andb(~HP100_BM_MASTER, BM); + /* 100 ms timeout */ + for (time = 0; time < 32000; time++) { + if (0 == (hp100_inb(BM) & HP100_BM_MASTER)) + break; + } + } else { /* Shasta or Rainier Shutdown/Reset */ + /* To ensure all bus master inloading activity has ceased, + * wait for no Rx PDAs or no Rx packets on card. + */ + hp100_page(PERFORMANCE); + /* 100 ms timeout */ + for (time = 0; time < 10000; time++) { + /* RX_PDL: PDLs not executed. */ + /* RX_PKT_CNT: RX'd packets on card. */ + if ((hp100_inb(RX_PDL) == 0) && (hp100_inb(RX_PKT_CNT) == 0)) + break; + } + + if (time >= 10000) + printk("hp100: %s: BM shutdown error.\n", dev->name); + + /* To ensure all bus master outloading activity has ceased, + * wait until the Tx PDA count goes to zero or no more Tx space + * available in the Tx region of the card. + */ + /* 100 ms timeout */ + for (time = 0; time < 10000; time++) { + if ((0 == hp100_inb(TX_PKT_CNT)) && + (0 != (hp100_inb(TX_MEM_FREE) & HP100_AUTO_COMPARE))) + break; + } + + /* Disable Busmaster mode */ + hp100_page(HW_MAP); + hp100_andb(~HP100_BM_MASTER, BM); + } /* end of shutdown procedure for non-etr parts */ + + hp100_cascade_reset(dev, 1); + } + hp100_page(PERFORMANCE); + /* hp100_outw( HP100_BM_READ | HP100_BM_WRITE | HP100_RESET_HB, OPTION_LSW ); */ + /* Busmaster mode should be shut down now. */ +} + +static int hp100_check_lan(struct net_device *dev) +{ + struct hp100_private *lp = netdev_priv(dev); + + if (lp->lan_type < 0) { /* no LAN type detected yet? */ + hp100_stop_interface(dev); + if ((lp->lan_type = hp100_sense_lan(dev)) < 0) { + printk("hp100: %s: no connection found - check wire\n", dev->name); + hp100_start_interface(dev); /* 10Mb/s RX packets maybe handled */ + return -EIO; + } + if (lp->lan_type == HP100_LAN_100) + lp->hub_status = hp100_login_to_vg_hub(dev, 0); /* relogin */ + hp100_start_interface(dev); + } + return 0; +} + +/* + * transmit functions + */ + +/* tx function for busmaster mode */ +static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + int i, ok_flag; + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + hp100_ring_t *ringptr; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4210, TRACE); + printk("hp100: %s: start_xmit_bm\n", dev->name); +#endif + + if (skb == NULL) { + return 0; + } + + if (skb->len <= 0) + return 0; + + if (skb->len < ETH_ZLEN && lp->chip == HP100_CHIPID_SHASTA) { + skb = skb_padto(skb, ETH_ZLEN); + if (skb == NULL) + return 0; + } + + /* Get Tx ring tail pointer */ + if (lp->txrtail->next == lp->txrhead) { + /* No memory. */ +#ifdef HP100_DEBUG + printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name); +#endif + /* not waited long enough since last tx? */ + if (jiffies - dev->trans_start < HZ) + return -EAGAIN; + + if (hp100_check_lan(dev)) + return -EIO; + + if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) { + /* we have a 100Mb/s adapter but it isn't connected to hub */ + printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name); + hp100_stop_interface(dev); + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + hp100_start_interface(dev); + } else { + spin_lock_irqsave(&lp->lock, flags); + hp100_ints_off(); /* Useful ? Jean II */ + i = hp100_sense_lan(dev); + hp100_ints_on(); + spin_unlock_irqrestore(&lp->lock, flags); + if (i == HP100_LAN_ERR) + printk("hp100: %s: link down detected\n", dev->name); + else if (lp->lan_type != i) { /* cable change! */ + /* it's very hard - all network settings must be changed!!! */ + printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name); + lp->lan_type = i; + hp100_stop_interface(dev); + if (lp->lan_type == HP100_LAN_100) + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + hp100_start_interface(dev); + } else { + printk("hp100: %s: interface reset\n", dev->name); + hp100_stop_interface(dev); + if (lp->lan_type == HP100_LAN_100) + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + hp100_start_interface(dev); + } + } + + dev->trans_start = jiffies; + return -EAGAIN; + } + + /* + * we have to turn int's off before modifying this, otherwise + * a tx_pdl_cleanup could occur at the same time + */ + spin_lock_irqsave(&lp->lock, flags); + ringptr = lp->txrtail; + lp->txrtail = ringptr->next; + + /* Check whether packet has minimal packet size */ + ok_flag = skb->len >= HP100_MIN_PACKET_SIZE; + i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE; + + ringptr->skb = skb; + ringptr->pdl[0] = ((1 << 16) | i); /* PDH: 1 Fragment & length */ + if (lp->chip == HP100_CHIPID_SHASTA) { + /* TODO:Could someone who has the EISA card please check if this works? */ + ringptr->pdl[2] = i; + } else { /* Lassen */ + /* In the PDL, don't use the padded size but the real packet size: */ + ringptr->pdl[2] = skb->len; /* 1st Frag: Length of frag */ + } + /* Conversion to new PCI API : map skbuf data to PCI bus. + * Doc says it's OK for EISA as well - Jean II */ + ringptr->pdl[1] = ((u32) pci_map_single(lp->pci_dev, skb->data, ringptr->pdl[2], PCI_DMA_TODEVICE)); /* 1st Frag: Adr. of data */ + + /* Hand this PDL to the card. */ + hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */ + + lp->txrcommit++; + spin_unlock_irqrestore(&lp->lock, flags); + + /* Update statistics */ + lp->stats.tx_packets++; + lp->stats.tx_bytes += skb->len; + dev->trans_start = jiffies; + + return 0; +} + + +/* clean_txring checks if packets have been sent by the card by reading + * the TX_PDL register from the performance page and comparing it to the + * number of commited packets. It then frees the skb's of the packets that + * obviously have been sent to the network. + * + * Needs the PERFORMANCE page selected. + */ +static void hp100_clean_txring(struct net_device *dev) +{ + struct hp100_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int donecount; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4211, TRACE); + printk("hp100: %s: clean txring\n", dev->name); +#endif + + /* How many PDLs have been transmitted? */ + donecount = (lp->txrcommit) - hp100_inb(TX_PDL); + +#ifdef HP100_DEBUG + if (donecount > MAX_TX_PDL) + printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name); +#endif + + for (; 0 != donecount; donecount--) { +#ifdef HP100_DEBUG_BM + printk("hp100: %s: Free skb: data @0x%.8x txrcommit=0x%x TXPDL=0x%x, done=0x%x\n", + dev->name, (u_int) lp->txrhead->skb->data, + lp->txrcommit, hp100_inb(TX_PDL), donecount); +#endif + /* Conversion to new PCI API : NOP */ + pci_unmap_single(lp->pci_dev, (dma_addr_t) lp->txrhead->pdl[1], lp->txrhead->pdl[2], PCI_DMA_TODEVICE); + dev_kfree_skb_any(lp->txrhead->skb); + lp->txrhead->skb = (void *) NULL; + lp->txrhead = lp->txrhead->next; + lp->txrcommit--; + } +} + +/* tx function for slave modes */ +static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + int i, ok_flag; + int ioaddr = dev->base_addr; + u_short val; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4212, TRACE); + printk("hp100: %s: start_xmit\n", dev->name); +#endif + + if (skb == NULL) { + return 0; + } + + if (skb->len <= 0) + return 0; + + if (hp100_check_lan(dev)) + return -EIO; + + /* If there is not enough free memory on the card... */ + i = hp100_inl(TX_MEM_FREE) & 0x7fffffff; + if (!(((i / 2) - 539) > (skb->len + 16) && (hp100_inb(TX_PKT_CNT) < 255))) { +#ifdef HP100_DEBUG + printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i); +#endif + /* not waited long enough since last failed tx try? */ + if (jiffies - dev->trans_start < HZ) { +#ifdef HP100_DEBUG + printk("hp100: %s: trans_start timing problem\n", + dev->name); +#endif + return -EAGAIN; + } + if (lp->lan_type == HP100_LAN_100 && lp->hub_status < 0) { + /* we have a 100Mb/s adapter but it isn't connected to hub */ + printk("hp100: %s: login to 100Mb/s hub retry\n", dev->name); + hp100_stop_interface(dev); + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + hp100_start_interface(dev); + } else { + spin_lock_irqsave(&lp->lock, flags); + hp100_ints_off(); /* Useful ? Jean II */ + i = hp100_sense_lan(dev); + hp100_ints_on(); + spin_unlock_irqrestore(&lp->lock, flags); + if (i == HP100_LAN_ERR) + printk("hp100: %s: link down detected\n", dev->name); + else if (lp->lan_type != i) { /* cable change! */ + /* it's very hard - all network setting must be changed!!! */ + printk("hp100: %s: cable change 10Mb/s <-> 100Mb/s detected\n", dev->name); + lp->lan_type = i; + hp100_stop_interface(dev); + if (lp->lan_type == HP100_LAN_100) + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + hp100_start_interface(dev); + } else { + printk("hp100: %s: interface reset\n", dev->name); + hp100_stop_interface(dev); + if (lp->lan_type == HP100_LAN_100) + lp->hub_status = hp100_login_to_vg_hub(dev, 0); + hp100_start_interface(dev); + mdelay(1); + } + } + dev->trans_start = jiffies; + return -EAGAIN; + } + + for (i = 0; i < 6000 && (hp100_inb(OPTION_MSW) & HP100_TX_CMD); i++) { +#ifdef HP100_DEBUG_TX + printk("hp100: %s: start_xmit: busy\n", dev->name); +#endif + } + + spin_lock_irqsave(&lp->lock, flags); + hp100_ints_off(); + val = hp100_inw(IRQ_STATUS); + /* Ack / clear the interrupt TX_COMPLETE interrupt - this interrupt is set + * when the current packet being transmitted on the wire is completed. */ + hp100_outw(HP100_TX_COMPLETE, IRQ_STATUS); +#ifdef HP100_DEBUG_TX + printk("hp100: %s: start_xmit: irq_status=0x%.4x, irqmask=0x%.4x, len=%d\n", + dev->name, val, hp100_inw(IRQ_MASK), (int) skb->len); +#endif + + ok_flag = skb->len >= HP100_MIN_PACKET_SIZE; + i = ok_flag ? skb->len : HP100_MIN_PACKET_SIZE; + + hp100_outw(i, DATA32); /* tell card the total packet length */ + hp100_outw(i, FRAGMENT_LEN); /* and first/only fragment length */ + + if (lp->mode == 2) { /* memory mapped */ + if (lp->mem_ptr_virt) { /* high pci memory was remapped */ + /* Note: The J2585B needs alignment to 32bits here! */ + memcpy_toio(lp->mem_ptr_virt, skb->data, (skb->len + 3) & ~3); + if (!ok_flag) + memset_io(lp->mem_ptr_virt, 0, HP100_MIN_PACKET_SIZE - skb->len); + } else { + /* Note: The J2585B needs alignment to 32bits here! */ + isa_memcpy_toio(lp->mem_ptr_phys, skb->data, (skb->len + 3) & ~3); + if (!ok_flag) + isa_memset_io(lp->mem_ptr_phys, 0, HP100_MIN_PACKET_SIZE - skb->len); + } + } else { /* programmed i/o */ + outsl(ioaddr + HP100_REG_DATA32, skb->data, + (skb->len + 3) >> 2); + if (!ok_flag) + for (i = (skb->len + 3) & ~3; i < HP100_MIN_PACKET_SIZE; i += 4) + hp100_outl(0, DATA32); + } + + hp100_outb(HP100_TX_CMD | HP100_SET_LB, OPTION_MSW); /* send packet */ + + lp->stats.tx_packets++; + lp->stats.tx_bytes += skb->len; + dev->trans_start = jiffies; + hp100_ints_on(); + spin_unlock_irqrestore(&lp->lock, flags); + + dev_kfree_skb_any(skb); + +#ifdef HP100_DEBUG_TX + printk("hp100: %s: start_xmit: end\n", dev->name); +#endif + + return 0; +} + + +/* + * Receive Function (Non-Busmaster mode) + * Called when an "Receive Packet" interrupt occurs, i.e. the receive + * packet counter is non-zero. + * For non-busmaster, this function does the whole work of transfering + * the packet to the host memory and then up to higher layers via skb + * and netif_rx. + */ + +static void hp100_rx(struct net_device *dev) +{ + int packets, pkt_len; + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + u_int header; + struct sk_buff *skb; + +#ifdef DEBUG_B + hp100_outw(0x4213, TRACE); + printk("hp100: %s: rx\n", dev->name); +#endif + + /* First get indication of received lan packet */ + /* RX_PKT_CND indicates the number of packets which have been fully */ + /* received onto the card but have not been fully transferred of the card */ + packets = hp100_inb(RX_PKT_CNT); +#ifdef HP100_DEBUG_RX + if (packets > 1) + printk("hp100: %s: rx: waiting packets = %d\n", dev->name, packets); +#endif + + while (packets-- > 0) { + /* If ADV_NXT_PKT is still set, we have to wait until the card has */ + /* really advanced to the next packet. */ + for (pkt_len = 0; pkt_len < 6000 && (hp100_inb(OPTION_MSW) & HP100_ADV_NXT_PKT); pkt_len++) { +#ifdef HP100_DEBUG_RX + printk ("hp100: %s: rx: busy, remaining packets = %d\n", dev->name, packets); +#endif + } + + /* First we get the header, which contains information about the */ + /* actual length of the received packet. */ + if (lp->mode == 2) { /* memory mapped mode */ + if (lp->mem_ptr_virt) /* if memory was remapped */ + header = readl(lp->mem_ptr_virt); + else + header = isa_readl(lp->mem_ptr_phys); + } else /* programmed i/o */ + header = hp100_inl(DATA32); + + pkt_len = ((header & HP100_PKT_LEN_MASK) + 3) & ~3; + +#ifdef HP100_DEBUG_RX + printk("hp100: %s: rx: new packet - length=%d, errors=0x%x, dest=0x%x\n", + dev->name, header & HP100_PKT_LEN_MASK, + (header >> 16) & 0xfff8, (header >> 16) & 7); +#endif + + /* Now we allocate the skb and transfer the data into it. */ + skb = dev_alloc_skb(pkt_len+2); + if (skb == NULL) { /* Not enough memory->drop packet */ +#ifdef HP100_DEBUG + printk("hp100: %s: rx: couldn't allocate a sk_buff of size %d\n", + dev->name, pkt_len); +#endif + lp->stats.rx_dropped++; + } else { /* skb successfully allocated */ + + u_char *ptr; + + skb_reserve(skb,2); + skb->dev = dev; + + /* ptr to start of the sk_buff data area */ + skb_put(skb, pkt_len); + ptr = skb->data; + + /* Now transfer the data from the card into that area */ + if (lp->mode == 2) { + if (lp->mem_ptr_virt) + memcpy_fromio(ptr, lp->mem_ptr_virt,pkt_len); + /* Note alignment to 32bit transfers */ + else + isa_memcpy_fromio(ptr, lp->mem_ptr_phys, pkt_len); + } else /* io mapped */ + insl(ioaddr + HP100_REG_DATA32, ptr, pkt_len >> 2); + + skb->protocol = eth_type_trans(skb, dev); + +#ifdef HP100_DEBUG_RX + printk("hp100: %s: rx: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + dev->name, ptr[0], ptr[1], ptr[2], ptr[3], + ptr[4], ptr[5], ptr[6], ptr[7], ptr[8], + ptr[9], ptr[10], ptr[11]); +#endif + netif_rx(skb); + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + } + + /* Indicate the card that we have got the packet */ + hp100_outb(HP100_ADV_NXT_PKT | HP100_SET_LB, OPTION_MSW); + + switch (header & 0x00070000) { + case (HP100_MULTI_ADDR_HASH << 16): + case (HP100_MULTI_ADDR_NO_HASH << 16): + lp->stats.multicast++; + break; + } + } /* end of while(there are packets) loop */ +#ifdef HP100_DEBUG_RX + printk("hp100_rx: %s: end\n", dev->name); +#endif +} + +/* + * Receive Function for Busmaster Mode + */ +static void hp100_rx_bm(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + hp100_ring_t *ptr; + u_int header; + int pkt_len; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4214, TRACE); + printk("hp100: %s: rx_bm\n", dev->name); +#endif + +#ifdef HP100_DEBUG + if (0 == lp->rxrcommit) { + printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name); + return; + } else + /* RX_PKT_CNT states how many PDLs are currently formatted and available to + * the cards BM engine */ + if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) { + printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n", + dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff, + lp->rxrcommit); + return; + } +#endif + + while ((lp->rxrcommit > hp100_inb(RX_PDL))) { + /* + * The packet was received into the pdl pointed to by lp->rxrhead ( + * the oldest pdl in the ring + */ + + /* First we get the header, which contains information about the */ + /* actual length of the received packet. */ + + ptr = lp->rxrhead; + + header = *(ptr->pdl - 1); + pkt_len = (header & HP100_PKT_LEN_MASK); + + /* Conversion to new PCI API : NOP */ + pci_unmap_single(lp->pci_dev, (dma_addr_t) ptr->pdl[3], MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE); + +#ifdef HP100_DEBUG_BM + printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n", + dev->name, (u_int) (ptr->pdl - 1), (u_int) header, + pkt_len, (header >> 16) & 0xfff8, (header >> 16) & 7); + printk("hp100: %s: RX_PDL_COUNT:0x%x TX_PDL_COUNT:0x%x, RX_PKT_CNT=0x%x PDH=0x%x, Data@0x%x len=0x%x\n", + dev->name, hp100_inb(RX_PDL), hp100_inb(TX_PDL), + hp100_inb(RX_PKT_CNT), (u_int) * (ptr->pdl), + (u_int) * (ptr->pdl + 3), (u_int) * (ptr->pdl + 4)); +#endif + + if ((pkt_len >= MIN_ETHER_SIZE) && + (pkt_len <= MAX_ETHER_SIZE)) { + if (ptr->skb == NULL) { + printk("hp100: %s: rx_bm: skb null\n", dev->name); + /* can happen if we only allocated room for the pdh due to memory shortage. */ + lp->stats.rx_dropped++; + } else { + skb_trim(ptr->skb, pkt_len); /* Shorten it */ + ptr->skb->protocol = + eth_type_trans(ptr->skb, dev); + + netif_rx(ptr->skb); /* Up and away... */ + + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + } + + switch (header & 0x00070000) { + case (HP100_MULTI_ADDR_HASH << 16): + case (HP100_MULTI_ADDR_NO_HASH << 16): + lp->stats.multicast++; + break; + } + } else { +#ifdef HP100_DEBUG + printk("hp100: %s: rx_bm: Received bad packet (length=%d)\n", dev->name, pkt_len); +#endif + if (ptr->skb != NULL) + dev_kfree_skb_any(ptr->skb); + lp->stats.rx_errors++; + } + + lp->rxrhead = lp->rxrhead->next; + + /* Allocate a new rx PDL (so lp->rxrcommit stays the same) */ + if (0 == hp100_build_rx_pdl(lp->rxrtail, dev)) { + /* No space for skb, header can still be received. */ +#ifdef HP100_DEBUG + printk("hp100: %s: rx_bm: No space for new PDL.\n", dev->name); +#endif + return; + } else { /* successfully allocated new PDL - put it in ringlist at tail. */ + hp100_outl((u32) lp->rxrtail->pdl_paddr, RX_PDA); + lp->rxrtail = lp->rxrtail->next; + } + + } +} + +/* + * statistics + */ +static struct net_device_stats *hp100_get_stats(struct net_device *dev) +{ + unsigned long flags; + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4215, TRACE); +#endif + + spin_lock_irqsave(&lp->lock, flags); + hp100_ints_off(); /* Useful ? Jean II */ + hp100_update_stats(dev); + hp100_ints_on(); + spin_unlock_irqrestore(&lp->lock, flags); + return &(lp->stats); +} + +static void hp100_update_stats(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + u_short val; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4216, TRACE); + printk("hp100: %s: update-stats\n", dev->name); +#endif + + /* Note: Statistics counters clear when read. */ + hp100_page(MAC_CTRL); + val = hp100_inw(DROPPED) & 0x0fff; + lp->stats.rx_errors += val; + lp->stats.rx_over_errors += val; + val = hp100_inb(CRC); + lp->stats.rx_errors += val; + lp->stats.rx_crc_errors += val; + val = hp100_inb(ABORT); + lp->stats.tx_errors += val; + lp->stats.tx_aborted_errors += val; + hp100_page(PERFORMANCE); +} + +static void hp100_misc_interrupt(struct net_device *dev) +{ +#ifdef HP100_DEBUG_B + int ioaddr = dev->base_addr; +#endif + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + int ioaddr = dev->base_addr; + hp100_outw(0x4216, TRACE); + printk("hp100: %s: misc_interrupt\n", dev->name); +#endif + + /* Note: Statistics counters clear when read. */ + lp->stats.rx_errors++; + lp->stats.tx_errors++; +} + +static void hp100_clear_stats(struct hp100_private *lp, int ioaddr) +{ + unsigned long flags; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4217, TRACE); + printk("hp100: %s: clear_stats\n", dev->name); +#endif + + spin_lock_irqsave(&lp->lock, flags); + hp100_page(MAC_CTRL); /* get all statistics bytes */ + hp100_inw(DROPPED); + hp100_inb(CRC); + hp100_inb(ABORT); + hp100_page(PERFORMANCE); + spin_unlock_irqrestore(&lp->lock, flags); +} + + +/* + * multicast setup + */ + +/* + * Set or clear the multicast filter for this adapter. + */ + +static void hp100_set_multicast_list(struct net_device *dev) +{ + unsigned long flags; + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4218, TRACE); + printk("hp100: %s: set_mc_list\n", dev->name); +#endif + + spin_lock_irqsave(&lp->lock, flags); + hp100_ints_off(); + hp100_page(MAC_CTRL); + hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); /* stop rx/tx */ + + if (dev->flags & IFF_PROMISC) { + lp->mac2_mode = HP100_MAC2MODE6; /* promiscuous mode = get all good */ + lp->mac1_mode = HP100_MAC1MODE6; /* packets on the net */ + memset(&lp->hash_bytes, 0xff, 8); + } else if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) { + lp->mac2_mode = HP100_MAC2MODE5; /* multicast mode = get packets for */ + lp->mac1_mode = HP100_MAC1MODE5; /* me, broadcasts and all multicasts */ +#ifdef HP100_MULTICAST_FILTER /* doesn't work!!! */ + if (dev->flags & IFF_ALLMULTI) { + /* set hash filter to receive all multicast packets */ + memset(&lp->hash_bytes, 0xff, 8); + } else { + int i, j, idx; + u_char *addrs; + struct dev_mc_list *dmi; + + memset(&lp->hash_bytes, 0x00, 8); +#ifdef HP100_DEBUG + printk("hp100: %s: computing hash filter - mc_count = %i\n", dev->name, dev->mc_count); +#endif + for (i = 0, dmi = dev->mc_list; i < dev->mc_count; i++, dmi = dmi->next) { + addrs = dmi->dmi_addr; + if ((*addrs & 0x01) == 0x01) { /* multicast address? */ +#ifdef HP100_DEBUG + printk("hp100: %s: multicast = %02x:%02x:%02x:%02x:%02x:%02x, ", + dev->name, addrs[0], addrs[1], addrs[2], + addrs[3], addrs[4], addrs[5]); +#endif + for (j = idx = 0; j < 6; j++) { + idx ^= *addrs++ & 0x3f; + printk(":%02x:", idx); + } +#ifdef HP100_DEBUG + printk("idx = %i\n", idx); +#endif + lp->hash_bytes[idx >> 3] |= (1 << (idx & 7)); + } + } + } +#else + memset(&lp->hash_bytes, 0xff, 8); +#endif + } else { + lp->mac2_mode = HP100_MAC2MODE3; /* normal mode = get packets for me */ + lp->mac1_mode = HP100_MAC1MODE3; /* and broadcasts */ + memset(&lp->hash_bytes, 0x00, 8); + } + + if (((hp100_inb(MAC_CFG_1) & 0x0f) != lp->mac1_mode) || + (hp100_inb(MAC_CFG_2) != lp->mac2_mode)) { + int i; + + hp100_outb(lp->mac2_mode, MAC_CFG_2); + hp100_andb(HP100_MAC1MODEMASK, MAC_CFG_1); /* clear mac1 mode bits */ + hp100_orb(lp->mac1_mode, MAC_CFG_1); /* and set the new mode */ + + hp100_page(MAC_ADDRESS); + for (i = 0; i < 8; i++) + hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i); +#ifdef HP100_DEBUG + printk("hp100: %s: mac1 = 0x%x, mac2 = 0x%x, multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + dev->name, lp->mac1_mode, lp->mac2_mode, + lp->hash_bytes[0], lp->hash_bytes[1], + lp->hash_bytes[2], lp->hash_bytes[3], + lp->hash_bytes[4], lp->hash_bytes[5], + lp->hash_bytes[6], lp->hash_bytes[7]); +#endif + + if (lp->lan_type == HP100_LAN_100) { +#ifdef HP100_DEBUG + printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name); +#endif + lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */ + } + } else { + int i; + u_char old_hash_bytes[8]; + + hp100_page(MAC_ADDRESS); + for (i = 0; i < 8; i++) + old_hash_bytes[i] = hp100_inb(HASH_BYTE0 + i); + if (memcmp(old_hash_bytes, &lp->hash_bytes, 8)) { + for (i = 0; i < 8; i++) + hp100_outb(lp->hash_bytes[i], HASH_BYTE0 + i); +#ifdef HP100_DEBUG + printk("hp100: %s: multicast hash = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", + dev->name, lp->hash_bytes[0], + lp->hash_bytes[1], lp->hash_bytes[2], + lp->hash_bytes[3], lp->hash_bytes[4], + lp->hash_bytes[5], lp->hash_bytes[6], + lp->hash_bytes[7]); +#endif + + if (lp->lan_type == HP100_LAN_100) { +#ifdef HP100_DEBUG + printk("hp100: %s: 100VG MAC settings have changed - relogin.\n", dev->name); +#endif + lp->hub_status = hp100_login_to_vg_hub(dev, 1); /* force a relogin to the hub */ + } + } + } + + hp100_page(MAC_CTRL); + hp100_orb(HP100_RX_EN | HP100_RX_IDLE | /* enable rx */ + HP100_TX_EN | HP100_TX_IDLE, MAC_CFG_1); /* enable tx */ + + hp100_page(PERFORMANCE); + hp100_ints_on(); + spin_unlock_irqrestore(&lp->lock, flags); +} + +/* + * hardware interrupt handling + */ + +static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct hp100_private *lp = netdev_priv(dev); + + int ioaddr; + u_int val; + + if (dev == NULL) + return IRQ_NONE; + ioaddr = dev->base_addr; + + spin_lock(&lp->lock); + + hp100_ints_off(); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4219, TRACE); +#endif + + /* hp100_page( PERFORMANCE ); */ + val = hp100_inw(IRQ_STATUS); +#ifdef HP100_DEBUG_IRQ + printk("hp100: %s: mode=%x,IRQ_STAT=0x%.4x,RXPKTCNT=0x%.2x RXPDL=0x%.2x TXPKTCNT=0x%.2x TXPDL=0x%.2x\n", + dev->name, lp->mode, (u_int) val, hp100_inb(RX_PKT_CNT), + hp100_inb(RX_PDL), hp100_inb(TX_PKT_CNT), hp100_inb(TX_PDL)); +#endif + + if (val == 0) { /* might be a shared interrupt */ + spin_unlock(&lp->lock); + hp100_ints_on(); + return IRQ_NONE; + } + /* We're only interested in those interrupts we really enabled. */ + /* val &= hp100_inw( IRQ_MASK ); */ + + /* + * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL + * is considered executed whenever the RX_PDL data structure is no longer + * needed. + */ + if (val & HP100_RX_PDL_FILL_COMPL) { + if (lp->mode == 1) + hp100_rx_bm(dev); + else { + printk("hp100: %s: rx_pdl_fill_compl interrupt although not busmaster?\n", dev->name); + } + } + + /* + * The RX_PACKET interrupt is set, when the receive packet counter is + * non zero. We use this interrupt for receiving in slave mode. In + * busmaster mode, we use it to make sure we did not miss any rx_pdl_fill + * interrupts. If rx_pdl_fill_compl is not set and rx_packet is set, then + * we somehow have missed a rx_pdl_fill_compl interrupt. + */ + + if (val & HP100_RX_PACKET) { /* Receive Packet Counter is non zero */ + if (lp->mode != 1) /* non busmaster */ + hp100_rx(dev); + else if (!(val & HP100_RX_PDL_FILL_COMPL)) { + /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */ + hp100_rx_bm(dev); + } + } + + /* + * Ack. that we have noticed the interrupt and thereby allow next one. + * Note that this is now done after the slave rx function, since first + * acknowledging and then setting ADV_NXT_PKT caused an extra interrupt + * on the J2573. + */ + hp100_outw(val, IRQ_STATUS); + + /* + * RX_ERROR is set when a packet is dropped due to no memory resources on + * the card or when a RCV_ERR occurs. + * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists + * only in the 802.3 MAC and happens when 16 collisions occur during a TX + */ + if (val & (HP100_TX_ERROR | HP100_RX_ERROR)) { +#ifdef HP100_DEBUG_IRQ + printk("hp100: %s: TX/RX Error IRQ\n", dev->name); +#endif + hp100_update_stats(dev); + if (lp->mode == 1) { + hp100_rxfill(dev); + hp100_clean_txring(dev); + } + } + + /* + * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero. + */ + if ((lp->mode == 1) && (val & (HP100_RX_PDA_ZERO))) + hp100_rxfill(dev); + + /* + * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire + * is completed + */ + if ((lp->mode == 1) && (val & (HP100_TX_COMPLETE))) + hp100_clean_txring(dev); + + /* + * MISC_ERROR is set when either the LAN link goes down or a detected + * bus error occurs. + */ + if (val & HP100_MISC_ERROR) { /* New for J2585B */ +#ifdef HP100_DEBUG_IRQ + printk + ("hp100: %s: Misc. Error Interrupt - Check cabling.\n", + dev->name); +#endif + if (lp->mode == 1) { + hp100_clean_txring(dev); + hp100_rxfill(dev); + } + hp100_misc_interrupt(dev); + } + + spin_unlock(&lp->lock); + hp100_ints_on(); + return IRQ_HANDLED; +} + +/* + * some misc functions + */ + +static void hp100_start_interface(struct net_device *dev) +{ + unsigned long flags; + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4220, TRACE); + printk("hp100: %s: hp100_start_interface\n", dev->name); +#endif + + spin_lock_irqsave(&lp->lock, flags); + + /* Ensure the adapter does not want to request an interrupt when */ + /* enabling the IRQ line to be active on the bus (i.e. not tri-stated) */ + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ + hp100_outw(0xffff, IRQ_STATUS); /* ack all IRQs */ + hp100_outw(HP100_FAKE_INT | HP100_INT_EN | HP100_RESET_LB, + OPTION_LSW); + /* Un Tri-state int. TODO: Check if shared interrupts can be realised? */ + hp100_outw(HP100_TRI_INT | HP100_RESET_HB, OPTION_LSW); + + if (lp->mode == 1) { + /* Make sure BM bit is set... */ + hp100_page(HW_MAP); + hp100_orb(HP100_BM_MASTER, BM); + hp100_rxfill(dev); + } else if (lp->mode == 2) { + /* Enable memory mapping. Note: Don't do this when busmaster. */ + hp100_outw(HP100_MMAP_DIS | HP100_RESET_HB, OPTION_LSW); + } + + hp100_page(PERFORMANCE); + hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ + hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */ + + /* enable a few interrupts: */ + if (lp->mode == 1) { /* busmaster mode */ + hp100_outw(HP100_RX_PDL_FILL_COMPL | + HP100_RX_PDA_ZERO | HP100_RX_ERROR | + /* HP100_RX_PACKET | */ + /* HP100_RX_EARLY_INT | */ HP100_SET_HB | + /* HP100_TX_PDA_ZERO | */ + HP100_TX_COMPLETE | + /* HP100_MISC_ERROR | */ + HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK); + } else { + hp100_outw(HP100_RX_PACKET | + HP100_RX_ERROR | HP100_SET_HB | + HP100_TX_ERROR | HP100_SET_LB, IRQ_MASK); + } + + /* Note : before hp100_set_multicast_list(), because it will play with + * spinlock itself... Jean II */ + spin_unlock_irqrestore(&lp->lock, flags); + + /* Enable MAC Tx and RX, set MAC modes, ... */ + hp100_set_multicast_list(dev); +} + +static void hp100_stop_interface(struct net_device *dev) +{ + struct hp100_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + u_int val; + +#ifdef HP100_DEBUG_B + printk("hp100: %s: hp100_stop_interface\n", dev->name); + hp100_outw(0x4221, TRACE); +#endif + + if (lp->mode == 1) + hp100_BM_shutdown(dev); + else { + /* Note: MMAP_DIS will be reenabled by start_interface */ + hp100_outw(HP100_INT_EN | HP100_RESET_LB | + HP100_TRI_INT | HP100_MMAP_DIS | HP100_SET_HB, + OPTION_LSW); + val = hp100_inw(OPTION_LSW); + + hp100_page(MAC_CTRL); + hp100_andb(~(HP100_RX_EN | HP100_TX_EN), MAC_CFG_1); + + if (!(val & HP100_HW_RST)) + return; /* If reset, imm. return ... */ + /* ... else: busy wait until idle */ + for (val = 0; val < 6000; val++) + if ((hp100_inb(MAC_CFG_1) & (HP100_TX_IDLE | HP100_RX_IDLE)) == (HP100_TX_IDLE | HP100_RX_IDLE)) { + hp100_page(PERFORMANCE); + return; + } + printk("hp100: %s: hp100_stop_interface - timeout\n", dev->name); + hp100_page(PERFORMANCE); + } +} + +static void hp100_load_eeprom(struct net_device *dev, u_short probe_ioaddr) +{ + int i; + int ioaddr = probe_ioaddr > 0 ? probe_ioaddr : dev->base_addr; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4222, TRACE); +#endif + + hp100_page(EEPROM_CTRL); + hp100_andw(~HP100_EEPROM_LOAD, EEPROM_CTRL); + hp100_orw(HP100_EEPROM_LOAD, EEPROM_CTRL); + for (i = 0; i < 10000; i++) + if (!(hp100_inb(OPTION_MSW) & HP100_EE_LOAD)) + return; + printk("hp100: %s: hp100_load_eeprom - timeout\n", dev->name); +} + +/* Sense connection status. + * return values: LAN_10 - Connected to 10Mbit/s network + * LAN_100 - Connected to 100Mbit/s network + * LAN_ERR - not connected or 100Mbit/s Hub down + */ +static int hp100_sense_lan(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + u_short val_VG, val_10; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4223, TRACE); +#endif + + hp100_page(MAC_CTRL); + val_10 = hp100_inb(10_LAN_CFG_1); + val_VG = hp100_inb(VG_LAN_CFG_1); + hp100_page(PERFORMANCE); +#ifdef HP100_DEBUG + printk("hp100: %s: sense_lan: val_VG = 0x%04x, val_10 = 0x%04x\n", + dev->name, val_VG, val_10); +#endif + + if (val_10 & HP100_LINK_BEAT_ST) /* 10Mb connection is active */ + return HP100_LAN_10; + + if (val_10 & HP100_AUI_ST) { /* have we BNC or AUI onboard? */ + /* + * This can be overriden by dos utility, so if this has no effect, + * perhaps you need to download that utility from HP and set card + * back to "auto detect". + */ + val_10 |= HP100_AUI_SEL | HP100_LOW_TH; + hp100_page(MAC_CTRL); + hp100_outb(val_10, 10_LAN_CFG_1); + hp100_page(PERFORMANCE); + return HP100_LAN_COAX; + } + + /* Those cards don't have a 100 Mbit connector */ + if ( !strcmp(lp->id, "HWP1920") || + (lp->pci_dev && + lp->pci_dev->vendor == PCI_VENDOR_ID && + (lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A || + lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A))) + return HP100_LAN_ERR; + + if (val_VG & HP100_LINK_CABLE_ST) /* Can hear the HUBs tone. */ + return HP100_LAN_100; + return HP100_LAN_ERR; +} + +static int hp100_down_vg_link(struct net_device *dev) +{ + struct hp100_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + unsigned long time; + long savelan, newlan; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4224, TRACE); + printk("hp100: %s: down_vg_link\n", dev->name); +#endif + + hp100_page(MAC_CTRL); + time = jiffies + (HZ / 4); + do { + if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) + break; + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + + if (time_after_eq(jiffies, time)) /* no signal->no logout */ + return 0; + + /* Drop the VG Link by clearing the link up cmd and load addr. */ + + hp100_andb(~(HP100_LOAD_ADDR | HP100_LINK_CMD), VG_LAN_CFG_1); + hp100_orb(HP100_VG_SEL, VG_LAN_CFG_1); + + /* Conditionally stall for >250ms on Link-Up Status (to go down) */ + time = jiffies + (HZ / 2); + do { + if (!(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) + break; + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + +#ifdef HP100_DEBUG + if (time_after_eq(jiffies, time)) + printk("hp100: %s: down_vg_link: Link does not go down?\n", dev->name); +#endif + + /* To prevent condition where Rev 1 VG MAC and old hubs do not complete */ + /* logout under traffic (even though all the status bits are cleared), */ + /* do this workaround to get the Rev 1 MAC in its idle state */ + if (lp->chip == HP100_CHIPID_LASSEN) { + /* Reset VG MAC to insure it leaves the logoff state even if */ + /* the Hub is still emitting tones */ + hp100_andb(~HP100_VG_RESET, VG_LAN_CFG_1); + udelay(1500); /* wait for >1ms */ + hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1); /* Release Reset */ + udelay(1500); + } + + /* New: For lassen, switch to 10 Mbps mac briefly to clear training ACK */ + /* to get the VG mac to full reset. This is not req.d with later chips */ + /* Note: It will take the between 1 and 2 seconds for the VG mac to be */ + /* selected again! This will be left to the connect hub function to */ + /* perform if desired. */ + if (lp->chip == HP100_CHIPID_LASSEN) { + /* Have to write to 10 and 100VG control registers simultaneously */ + savelan = newlan = hp100_inl(10_LAN_CFG_1); /* read 10+100 LAN_CFG regs */ + newlan &= ~(HP100_VG_SEL << 16); + newlan |= (HP100_DOT3_MAC) << 8; + hp100_andb(~HP100_AUTO_MODE, MAC_CFG_3); /* Autosel off */ + hp100_outl(newlan, 10_LAN_CFG_1); + + /* Conditionally stall for 5sec on VG selected. */ + time = jiffies + (HZ * 5); + do { + if (!(hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) + break; + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + + hp100_orb(HP100_AUTO_MODE, MAC_CFG_3); /* Autosel back on */ + hp100_outl(savelan, 10_LAN_CFG_1); + } + + time = jiffies + (3 * HZ); /* Timeout 3s */ + do { + if ((hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) == 0) + break; + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + + if (time_before_eq(time, jiffies)) { +#ifdef HP100_DEBUG + printk("hp100: %s: down_vg_link: timeout\n", dev->name); +#endif + return -EIO; + } + + time = jiffies + (2 * HZ); /* This seems to take a while.... */ + do { + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + + return 0; +} + +static int hp100_login_to_vg_hub(struct net_device *dev, u_short force_relogin) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + u_short val = 0; + unsigned long time; + int startst; + +#ifdef HP100_DEBUG_B + hp100_outw(0x4225, TRACE); + printk("hp100: %s: login_to_vg_hub\n", dev->name); +#endif + + /* Initiate a login sequence iff VG MAC is enabled and either Load Address + * bit is zero or the force relogin flag is set (e.g. due to MAC address or + * promiscuous mode change) + */ + hp100_page(MAC_CTRL); + startst = hp100_inb(VG_LAN_CFG_1); + if ((force_relogin == 1) || (hp100_inb(MAC_CFG_4) & HP100_MAC_SEL_ST)) { +#ifdef HP100_DEBUG_TRAINING + printk("hp100: %s: Start training\n", dev->name); +#endif + + /* Ensure VG Reset bit is 1 (i.e., do not reset) */ + hp100_orb(HP100_VG_RESET, VG_LAN_CFG_1); + + /* If Lassen AND auto-select-mode AND VG tones were sensed on */ + /* entry then temporarily put them into force 100Mbit mode */ + if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST)) + hp100_andb(~HP100_DOT3_MAC, 10_LAN_CFG_2); + + /* Drop the VG link by zeroing Link Up Command and Load Address */ + hp100_andb(~(HP100_LINK_CMD /* |HP100_LOAD_ADDR */ ), VG_LAN_CFG_1); + +#ifdef HP100_DEBUG_TRAINING + printk("hp100: %s: Bring down the link\n", dev->name); +#endif + + /* Wait for link to drop */ + time = jiffies + (HZ / 10); + do { + if (~(hp100_inb(VG_LAN_CFG_1) & HP100_LINK_UP_ST)) + break; + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + + /* Start an addressed training and optionally request promiscuous port */ + if ((dev->flags) & IFF_PROMISC) { + hp100_orb(HP100_PROM_MODE, VG_LAN_CFG_2); + if (lp->chip == HP100_CHIPID_LASSEN) + hp100_orw(HP100_MACRQ_PROMSC, TRAIN_REQUEST); + } else { + hp100_andb(~HP100_PROM_MODE, VG_LAN_CFG_2); + /* For ETR parts we need to reset the prom. bit in the training + * register, otherwise promiscious mode won't be disabled. + */ + if (lp->chip == HP100_CHIPID_LASSEN) { + hp100_andw(~HP100_MACRQ_PROMSC, TRAIN_REQUEST); + } + } + + /* With ETR parts, frame format request bits can be set. */ + if (lp->chip == HP100_CHIPID_LASSEN) + hp100_orb(HP100_MACRQ_FRAMEFMT_EITHER, TRAIN_REQUEST); + + hp100_orb(HP100_LINK_CMD | HP100_LOAD_ADDR | HP100_VG_RESET, VG_LAN_CFG_1); + + /* Note: Next wait could be omitted for Hood and earlier chips under */ + /* certain circumstances */ + /* TODO: check if hood/earlier and skip wait. */ + + /* Wait for either short timeout for VG tones or long for login */ + /* Wait for the card hardware to signalise link cable status ok... */ + hp100_page(MAC_CTRL); + time = jiffies + (1 * HZ); /* 1 sec timeout for cable st */ + do { + if (hp100_inb(VG_LAN_CFG_1) & HP100_LINK_CABLE_ST) + break; + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_before(jiffies, time)); + + if (time_after_eq(jiffies, time)) { +#ifdef HP100_DEBUG_TRAINING + printk("hp100: %s: Link cable status not ok? Training aborted.\n", dev->name); +#endif + } else { +#ifdef HP100_DEBUG_TRAINING + printk + ("hp100: %s: HUB tones detected. Trying to train.\n", + dev->name); +#endif + + time = jiffies + (2 * HZ); /* again a timeout */ + do { + val = hp100_inb(VG_LAN_CFG_1); + if ((val & (HP100_LINK_UP_ST))) { +#ifdef HP100_DEBUG_TRAINING + printk("hp100: %s: Passed training.\n", dev->name); +#endif + break; + } + if (!in_interrupt()) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + } + } while (time_after(time, jiffies)); + } + + /* If LINK_UP_ST is set, then we are logged into the hub. */ + if (time_before_eq(jiffies, time) && (val & HP100_LINK_UP_ST)) { +#ifdef HP100_DEBUG_TRAINING + printk("hp100: %s: Successfully logged into the HUB.\n", dev->name); + if (lp->chip == HP100_CHIPID_LASSEN) { + val = hp100_inw(TRAIN_ALLOW); + printk("hp100: %s: Card supports 100VG MAC Version \"%s\" ", + dev->name, (hp100_inw(TRAIN_REQUEST) & HP100_CARD_MACVER) ? "802.12" : "Pre"); + printk("Driver will use MAC Version \"%s\"\n", (val & HP100_HUB_MACVER) ? "802.12" : "Pre"); + printk("hp100: %s: Frame format is %s.\n", dev->name, (val & HP100_MALLOW_FRAMEFMT) ? "802.5" : "802.3"); + } +#endif + } else { + /* If LINK_UP_ST is not set, login was not successful */ + printk("hp100: %s: Problem logging into the HUB.\n", dev->name); + if (lp->chip == HP100_CHIPID_LASSEN) { + /* Check allowed Register to find out why there is a problem. */ + val = hp100_inw(TRAIN_ALLOW); /* won't work on non-ETR card */ +#ifdef HP100_DEBUG_TRAINING + printk("hp100: %s: MAC Configuration requested: 0x%04x, HUB allowed: 0x%04x\n", dev->name, hp100_inw(TRAIN_REQUEST), val); +#endif + if (val & HP100_MALLOW_ACCDENIED) + printk("hp100: %s: HUB access denied.\n", dev->name); + if (val & HP100_MALLOW_CONFIGURE) + printk("hp100: %s: MAC Configuration is incompatible with the Network.\n", dev->name); + if (val & HP100_MALLOW_DUPADDR) + printk("hp100: %s: Duplicate MAC Address on the Network.\n", dev->name); + } + } + + /* If we have put the chip into forced 100 Mbit mode earlier, go back */ + /* to auto-select mode */ + + if ((lp->chip == HP100_CHIPID_LASSEN) && (startst & HP100_LINK_CABLE_ST)) { + hp100_page(MAC_CTRL); + hp100_orb(HP100_DOT3_MAC, 10_LAN_CFG_2); + } + + val = hp100_inb(VG_LAN_CFG_1); + + /* Clear the MISC_ERROR Interrupt, which might be generated when doing the relogin */ + hp100_page(PERFORMANCE); + hp100_outw(HP100_MISC_ERROR, IRQ_STATUS); + + if (val & HP100_LINK_UP_ST) + return (0); /* login was ok */ + else { + printk("hp100: %s: Training failed.\n", dev->name); + hp100_down_vg_link(dev); + return -EIO; + } + } + /* no forced relogin & already link there->no training. */ + return -EIO; +} + +static void hp100_cascade_reset(struct net_device *dev, u_short enable) +{ + int ioaddr = dev->base_addr; + struct hp100_private *lp = netdev_priv(dev); + +#ifdef HP100_DEBUG_B + hp100_outw(0x4226, TRACE); + printk("hp100: %s: cascade_reset\n", dev->name); +#endif + + if (enable) { + hp100_outw(HP100_HW_RST | HP100_RESET_LB, OPTION_LSW); + if (lp->chip == HP100_CHIPID_LASSEN) { + /* Lassen requires a PCI transmit fifo reset */ + hp100_page(HW_MAP); + hp100_andb(~HP100_PCI_RESET, PCICTRL2); + hp100_orb(HP100_PCI_RESET, PCICTRL2); + /* Wait for min. 300 ns */ + /* we can't use jiffies here, because it may be */ + /* that we have disabled the timer... */ + udelay(400); + hp100_andb(~HP100_PCI_RESET, PCICTRL2); + hp100_page(PERFORMANCE); + } + } else { /* bring out of reset */ + hp100_outw(HP100_HW_RST | HP100_SET_LB, OPTION_LSW); + udelay(400); + hp100_page(PERFORMANCE); + } +} + +#ifdef HP100_DEBUG +void hp100_RegisterDump(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + int Page; + int Register; + + /* Dump common registers */ + printk("hp100: %s: Cascade Register Dump\n", dev->name); + printk("hardware id #1: 0x%.2x\n", hp100_inb(HW_ID)); + printk("hardware id #2/paging: 0x%.2x\n", hp100_inb(PAGING)); + printk("option #1: 0x%.4x\n", hp100_inw(OPTION_LSW)); + printk("option #2: 0x%.4x\n", hp100_inw(OPTION_MSW)); + + /* Dump paged registers */ + for (Page = 0; Page < 8; Page++) { + /* Dump registers */ + printk("page: 0x%.2x\n", Page); + outw(Page, ioaddr + 0x02); + for (Register = 0x8; Register < 0x22; Register += 2) { + /* Display Register contents except data port */ + if (((Register != 0x10) && (Register != 0x12)) || (Page > 0)) { + printk("0x%.2x = 0x%.4x\n", Register, inw(ioaddr + Register)); + } + } + } + hp100_page(PERFORMANCE); +} +#endif + + +static void cleanup_dev(struct net_device *d) +{ + struct hp100_private *p = netdev_priv(d); + + unregister_netdev(d); + release_region(d->base_addr, HP100_REGION_SIZE); + + if (p->mode == 1) /* busmaster */ + pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f, + p->page_vaddr_algn, + virt_to_whatever(d, p->page_vaddr_algn)); + if (p->mem_ptr_virt) + iounmap(p->mem_ptr_virt); + + free_netdev(d); +} + +#ifdef CONFIG_EISA +static int __init hp100_eisa_probe (struct device *gendev) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); + struct eisa_device *edev = to_eisa_device(gendev); + int err; + + if (!dev) + return -ENOMEM; + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &edev->dev); + + err = hp100_probe1(dev, edev->base_addr + 0xC38, HP100_BUS_EISA, NULL); + if (err) + goto out1; + + err = register_netdev(dev); + if (err) + goto out2; + +#ifdef HP100_DEBUG + printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name, + dev->base_addr); +#endif + gendev->driver_data = dev; + return 0; + out2: + release_region(dev->base_addr, HP100_REGION_SIZE); + out1: + free_netdev(dev); + return err; +} + +static int __devexit hp100_eisa_remove (struct device *gendev) +{ + struct net_device *dev = gendev->driver_data; + cleanup_dev(dev); + return 0; +} + +static struct eisa_driver hp100_eisa_driver = { + .id_table = hp100_eisa_tbl, + .driver = { + .name = "hp100", + .probe = hp100_eisa_probe, + .remove = __devexit_p (hp100_eisa_remove), + } +}; +#endif + +#ifdef CONFIG_PCI +static int __devinit hp100_pci_probe (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + int ioaddr; + u_short pci_command; + int err; + + if (pci_enable_device(pdev)) + return -ENODEV; + + dev = alloc_etherdev(sizeof(struct hp100_private)); + if (!dev) { + err = -ENOMEM; + goto out0; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + pci_read_config_word(pdev, PCI_COMMAND, &pci_command); + if (!(pci_command & PCI_COMMAND_IO)) { +#ifdef HP100_DEBUG + printk("hp100: %s: PCI I/O Bit has not been set. Setting...\n", dev->name); +#endif + pci_command |= PCI_COMMAND_IO; + pci_write_config_word(pdev, PCI_COMMAND, pci_command); + } + + if (!(pci_command & PCI_COMMAND_MASTER)) { +#ifdef HP100_DEBUG + printk("hp100: %s: PCI Master Bit has not been set. Setting...\n", dev->name); +#endif + pci_command |= PCI_COMMAND_MASTER; + pci_write_config_word(pdev, PCI_COMMAND, pci_command); + } + + ioaddr = pci_resource_start(pdev, 0); + err = hp100_probe1(dev, ioaddr, HP100_BUS_PCI, pdev); + if (err) + goto out1; + err = register_netdev(dev); + if (err) + goto out2; + +#ifdef HP100_DEBUG + printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr); +#endif + pci_set_drvdata(pdev, dev); + return 0; + out2: + release_region(dev->base_addr, HP100_REGION_SIZE); + out1: + free_netdev(dev); + out0: + pci_disable_device(pdev); + return err; +} + +static void __devexit hp100_pci_remove (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + cleanup_dev(dev); + pci_disable_device(pdev); +} + + +static struct pci_driver hp100_pci_driver = { + .name = "hp100", + .id_table = hp100_pci_tbl, + .probe = hp100_pci_probe, + .remove = __devexit_p(hp100_pci_remove), +}; +#endif + +/* + * module section + */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jaroslav Kysela <perex@suse.cz>, " + "Siegfried \"Frieder\" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>"); +MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters"); + +/* + * Note: to register three isa devices, use: + * option hp100 hp100_port=0,0,0 + * to register one card at io 0x280 as eth239, use: + * option hp100 hp100_port=0x280 + */ +#if defined(MODULE) && defined(CONFIG_ISA) +#define HP100_DEVICES 5 +/* Parameters set by insmod */ +static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 }; +module_param_array(hp100_port, int, NULL, 0); + +/* List of devices */ +static struct net_device *hp100_devlist[HP100_DEVICES]; + +static int __init hp100_isa_init(void) +{ + struct net_device *dev; + int i, err, cards = 0; + + /* Don't autoprobe ISA bus */ + if (hp100_port[0] == 0) + return -ENODEV; + + /* Loop on all possible base addresses */ + for (i = 0; i < HP100_DEVICES && hp100_port[i] != -1; ++i) { + dev = alloc_etherdev(sizeof(struct hp100_private)); + if (!dev) { + printk(KERN_WARNING "hp100: no memory for network device\n"); + while (cards > 0) + cleanup_dev(hp100_devlist[--cards]); + + return -ENOMEM; + } + SET_MODULE_OWNER(dev); + + err = hp100_isa_probe(dev, hp100_port[i]); + if (!err) { + err = register_netdev(dev); + if (!err) + hp100_devlist[cards++] = dev; + else + release_region(dev->base_addr, HP100_REGION_SIZE); + } + + if (err) + free_netdev(dev); + } + + return cards > 0 ? 0 : -ENODEV; +} + +static void __exit hp100_isa_cleanup(void) +{ + int i; + + for (i = 0; i < HP100_DEVICES; i++) { + struct net_device *dev = hp100_devlist[i]; + if (dev) + cleanup_dev(dev); + } +} +#else +#define hp100_isa_init() (0) +#define hp100_isa_cleanup() do { } while(0) +#endif + +static int __init hp100_module_init(void) +{ + int err; + + err = hp100_isa_init(); + if (err && err != -ENODEV) + goto out; +#ifdef CONFIG_EISA + err = eisa_driver_register(&hp100_eisa_driver); + if (err && err != -ENODEV) + goto out2; +#endif +#ifdef CONFIG_PCI + err = pci_module_init(&hp100_pci_driver); + if (err && err != -ENODEV) + goto out3; +#endif + out: + return err; + out3: +#ifdef CONFIG_EISA + eisa_driver_unregister (&hp100_eisa_driver); + out2: +#endif + hp100_isa_cleanup(); + goto out; +} + + +static void __exit hp100_module_exit(void) +{ + hp100_isa_cleanup(); +#ifdef CONFIG_EISA + eisa_driver_unregister (&hp100_eisa_driver); +#endif +#ifdef CONFIG_PCI + pci_unregister_driver (&hp100_pci_driver); +#endif +} + +module_init(hp100_module_init) +module_exit(hp100_module_exit) + + +/* + * Local variables: + * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c hp100.c" + * c-indent-level: 2 + * tab-width: 8 + * End: + */ |