Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

1 files changed, 117 insertions, 123 deletions

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
index 445c0595c997..ad32af67e618 100644
--- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c
+++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c
@@ -58,13 +58,6 @@ MODULE_DESCRIPTION("Gelic Network driver");
 MODULE_LICENSE("GPL");
 
 
-static inline void gelic_card_enable_rxdmac(struct gelic_card *card);
-static inline void gelic_card_disable_rxdmac(struct gelic_card *card);
-static inline void gelic_card_disable_txdmac(struct gelic_card *card);
-static inline void gelic_card_reset_chain(struct gelic_card *card,
-					  struct gelic_descr_chain *chain,
-					  struct gelic_descr *start_descr);
-
 /* set irq_mask */
 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
 {
@@ -78,12 +71,12 @@ int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
 	return status;
 }
 
-static inline void gelic_card_rx_irq_on(struct gelic_card *card)
+static void gelic_card_rx_irq_on(struct gelic_card *card)
 {
 	card->irq_mask |= GELIC_CARD_RXINT;
 	gelic_card_set_irq_mask(card, card->irq_mask);
 }
-static inline void gelic_card_rx_irq_off(struct gelic_card *card)
+static void gelic_card_rx_irq_off(struct gelic_card *card)
 {
 	card->irq_mask &= ~GELIC_CARD_RXINT;
 	gelic_card_set_irq_mask(card, card->irq_mask);
@@ -127,6 +120,120 @@ static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
 	return 0;
 }
 
+/**
+ * gelic_card_disable_txdmac - disables the transmit DMA controller
+ * @card: card structure
+ *
+ * gelic_card_disable_txdmac terminates processing on the DMA controller by
+ * turing off DMA and issuing a force end
+ */
+static void gelic_card_disable_txdmac(struct gelic_card *card)
+{
+	int status;
+
+	/* this hvc blocks until the DMA in progress really stopped */
+	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_stop_tx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_card_enable_rxdmac - enables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
+ * in the GDADMACCNTR register
+ */
+static void gelic_card_enable_rxdmac(struct gelic_card *card)
+{
+	int status;
+
+#ifdef DEBUG
+	if (gelic_descr_get_status(card->rx_chain.head) !=
+	    GELIC_DESCR_DMA_CARDOWNED) {
+		printk(KERN_ERR "%s: status=%x\n", __func__,
+		       be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
+		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
+		       be32_to_cpu(card->rx_chain.head->next_descr_addr));
+		printk(KERN_ERR "%s: head=%p\n", __func__,
+		       card->rx_chain.head);
+	}
+#endif
+	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
+				card->rx_chain.head->bus_addr, 0);
+	if (status)
+		dev_info(ctodev(card),
+			 "lv1_net_start_rx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_card_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_card_disable_rxdmac terminates processing on the DMA controller by
+ * turing off DMA and issuing a force end
+ */
+static void gelic_card_disable_rxdmac(struct gelic_card *card)
+{
+	int status;
+
+	/* this hvc blocks until the DMA in progress really stopped */
+	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_stop_rx_dma failed, %d\n", status);
+}
+
+/**
+ * gelic_descr_set_status -- sets the status of a descriptor
+ * @descr: descriptor to change
+ * @status: status to set in the descriptor
+ *
+ * changes the status to the specified value. Doesn't change other bits
+ * in the status
+ */
+static void gelic_descr_set_status(struct gelic_descr *descr,
+				   enum gelic_descr_dma_status status)
+{
+	descr->dmac_cmd_status = cpu_to_be32(status |
+			(be32_to_cpu(descr->dmac_cmd_status) &
+			 ~GELIC_DESCR_DMA_STAT_MASK));
+	/*
+	 * dma_cmd_status field is used to indicate whether the descriptor
+	 * is valid or not.
+	 * Usually caller of this function wants to inform that to the
+	 * hardware, so we assure here the hardware sees the change.
+	 */
+	wmb();
+}
+
+/**
+ * gelic_card_reset_chain - reset status of a descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ * @start_descr: address of descriptor array
+ *
+ * Reset the status of dma descriptors to ready state
+ * and re-initialize the hardware chain for later use
+ */
+static void gelic_card_reset_chain(struct gelic_card *card,
+				   struct gelic_descr_chain *chain,
+				   struct gelic_descr *start_descr)
+{
+	struct gelic_descr *descr;
+
+	for (descr = start_descr; start_descr != descr->next; descr++) {
+		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
+		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
+	}
+
+	chain->head = start_descr;
+	chain->tail = (descr - 1);
+
+	(descr - 1)->next_descr_addr = 0;
+}
+
 void gelic_card_up(struct gelic_card *card)
 {
 	pr_debug("%s: called\n", __func__);
@@ -183,29 +290,6 @@ gelic_descr_get_status(struct gelic_descr *descr)
 }
 
 /**
- * gelic_descr_set_status -- sets the status of a descriptor
- * @descr: descriptor to change
- * @status: status to set in the descriptor
- *
- * changes the status to the specified value. Doesn't change other bits
- * in the status
- */
-static void gelic_descr_set_status(struct gelic_descr *descr,
-				   enum gelic_descr_dma_status status)
-{
-	descr->dmac_cmd_status = cpu_to_be32(status |
-			(be32_to_cpu(descr->dmac_cmd_status) &
-			 ~GELIC_DESCR_DMA_STAT_MASK));
-	/*
-	 * dma_cmd_status field is used to indicate whether the descriptor
-	 * is valid or not.
-	 * Usually caller of this function wants to inform that to the
-	 * hardware, so we assure here the hardware sees the change.
-	 */
-	wmb();
-}
-
-/**
  * gelic_card_free_chain - free descriptor chain
  * @card: card structure
  * @descr_in: address of desc
@@ -286,31 +370,6 @@ iommu_error:
 }
 
 /**
- * gelic_card_reset_chain - reset status of a descriptor chain
- * @card: card structure
- * @chain: address of chain
- * @start_descr: address of descriptor array
- *
- * Reset the status of dma descriptors to ready state
- * and re-initialize the hardware chain for later use
- */
-static void gelic_card_reset_chain(struct gelic_card *card,
-				   struct gelic_descr_chain *chain,
-				   struct gelic_descr *start_descr)
-{
-	struct gelic_descr *descr;
-
-	for (descr = start_descr; start_descr != descr->next; descr++) {
-		gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
-		descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
-	}
-
-	chain->head = start_descr;
-	chain->tail = (descr - 1);
-
-	(descr - 1)->next_descr_addr = 0;
-}
-/**
  * gelic_descr_prepare_rx - reinitializes a rx descriptor
  * @card: card structure
  * @descr: descriptor to re-init
@@ -599,71 +658,6 @@ void gelic_net_set_multi(struct net_device *netdev)
 }
 
 /**
- * gelic_card_enable_rxdmac - enables the receive DMA controller
- * @card: card structure
- *
- * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
- * in the GDADMACCNTR register
- */
-static inline void gelic_card_enable_rxdmac(struct gelic_card *card)
-{
-	int status;
-
-#ifdef DEBUG
-	if (gelic_descr_get_status(card->rx_chain.head) !=
-	    GELIC_DESCR_DMA_CARDOWNED) {
-		printk(KERN_ERR "%s: status=%x\n", __func__,
-		       be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
-		printk(KERN_ERR "%s: nextphy=%x\n", __func__,
-		       be32_to_cpu(card->rx_chain.head->next_descr_addr));
-		printk(KERN_ERR "%s: head=%p\n", __func__,
-		       card->rx_chain.head);
-	}
-#endif
-	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
-				card->rx_chain.head->bus_addr, 0);
-	if (status)
-		dev_info(ctodev(card),
-			 "lv1_net_start_rx_dma failed, status=%d\n", status);
-}
-
-/**
- * gelic_card_disable_rxdmac - disables the receive DMA controller
- * @card: card structure
- *
- * gelic_card_disable_rxdmac terminates processing on the DMA controller by
- * turing off DMA and issuing a force end
- */
-static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
-{
-	int status;
-
-	/* this hvc blocks until the DMA in progress really stopped */
-	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
-	if (status)
-		dev_err(ctodev(card),
-			"lv1_net_stop_rx_dma failed, %d\n", status);
-}
-
-/**
- * gelic_card_disable_txdmac - disables the transmit DMA controller
- * @card: card structure
- *
- * gelic_card_disable_txdmac terminates processing on the DMA controller by
- * turing off DMA and issuing a force end
- */
-static inline void gelic_card_disable_txdmac(struct gelic_card *card)
-{
-	int status;
-
-	/* this hvc blocks until the DMA in progress really stopped */
-	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
-	if (status)
-		dev_err(ctodev(card),
-			"lv1_net_stop_tx_dma failed, status=%d\n", status);
-}
-
-/**
  * gelic_net_stop - called upon ifconfig down
  * @netdev: interface device structure
  *
@@ -746,7 +740,7 @@ static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
 	}
 }
 
-static inline struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
+static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
 						 unsigned short tag)
 {
 	struct vlan_ethhdr *veth;