diff options
author | Jesse Brandeburg <jesse.brandeburg@intel.com> | 2020-09-25 15:24:39 -0700 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-09-25 16:29:00 -0700 |
commit | 7c8c0291f84027558bd5fca5729cbcf288c510f4 (patch) | |
tree | 8574ba2573ede501177892e0b793352927148781 /drivers/net/ethernet/ti | |
parent | 36ec148657dd97762a861a8d17e25f03208f1b59 (diff) | |
download | linux-7c8c0291f84027558bd5fca5729cbcf288c510f4.tar.bz2 |
drivers/net/ethernet: clean up unused assignments
As part of the W=1 compliation series, these lines all created
warnings about unused variables that were assigned a value. Most
of them are from register reads, but some are just picking up
a return value from a function and never doing anything with it.
Fixed warnings:
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
.../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable]
.../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs '
.../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable]
.../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable]
.../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable]
.../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable]
.../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable]
.../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable]
.../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable]
.../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable]
.../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable]
.../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable]
.../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable]
.../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
The register reads should be OK, because the current
implementation of readl and friends will always execute even
without an lvalue.
When it makes sense, just remove the lvalue assignment and the
local. Other times, just remove the offending code, and
occasionally, just mark the variable as maybe unused since it
could be used in an ifdef or debug scenario.
Only compile tested with W=1.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/ti')
-rw-r--r-- | drivers/net/ethernet/ti/cpsw_new.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/ti/davinci_emac.c | 5 | ||||
-rw-r--r-- | drivers/net/ethernet/ti/tlan.c | 4 |
3 files changed, 3 insertions, 8 deletions
diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c index 26073cd63e33..f779d2e1b5c5 100644 --- a/drivers/net/ethernet/ti/cpsw_new.c +++ b/drivers/net/ethernet/ti/cpsw_new.c @@ -1660,12 +1660,10 @@ static int cpsw_dl_switch_mode_set(struct devlink *dl, u32 id, for (i = 0; i < cpsw->data.slaves; i++) { struct cpsw_slave *slave = &cpsw->slaves[i]; struct net_device *sl_ndev = slave->ndev; - struct cpsw_priv *priv; if (!sl_ndev) continue; - priv = netdev_priv(sl_ndev); if (switch_en) vlan = cpsw->data.default_vlan; else diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index de282531f68b..b36d0e412d23 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1227,7 +1227,7 @@ static int emac_poll(struct napi_struct *napi, int budget) struct net_device *ndev = priv->ndev; struct device *emac_dev = &ndev->dev; u32 status = 0; - u32 num_tx_pkts = 0, num_rx_pkts = 0; + u32 num_rx_pkts = 0; /* Check interrupt vectors and call packet processing */ status = emac_read(EMAC_MACINVECTOR); @@ -1238,8 +1238,7 @@ static int emac_poll(struct napi_struct *napi, int budget) mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; if (status & mask) { - num_tx_pkts = cpdma_chan_process(priv->txchan, - EMAC_DEF_TX_MAX_SERVICE); + cpdma_chan_process(priv->txchan, EMAC_DEF_TX_MAX_SERVICE); } /* TX processing */ mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 1203a3c0febb..317fad787d78 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -653,7 +653,6 @@ module_exit(tlan_exit); static void __init tlan_eisa_probe(void) { long ioaddr; - int rc = -ENODEV; int irq; u16 device_id; @@ -718,8 +717,7 @@ static void __init tlan_eisa_probe(void) /* Setup the newly found eisa adapter */ - rc = tlan_probe1(NULL, ioaddr, irq, - 12, NULL); + tlan_probe1(NULL, ioaddr, irq, 12, NULL); continue; out: |