diff options
| author | Andrew Lunn <andrew@lunn.ch> | 2018-09-12 01:53:14 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2018-09-12 20:24:21 -0700 |
| commit | 41124fa64d4b298b82266b7ddbefc43540b77b44 (patch) | |
| tree | 6674297c9ee35f311f290299bb5d3151fe46d85c /drivers/net/ethernet/stmicro | |
| parent | 04b7d41d8046ded18fa32d9c7cb524ba28947188 (diff) | |
| download | linux-41124fa64d4b298b82266b7ddbefc43540b77b44.tar.bz2 | |
net: ethernet: Add helper to remove a supported link mode
Some MAC hardware cannot support a subset of link modes. e.g. often
1Gbps Full duplex is supported, but Half duplex is not. Add a helper
to remove such a link mode.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/stmicro')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 12 |
1 files changed, 8 insertions, 4 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 3d7aec7a050b..3715a0a4af3c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -993,10 +993,14 @@ static int stmmac_init_phy(struct net_device *dev) * Half-duplex mode not supported with multiqueue * half-duplex can only works with single queue */ - if (tx_cnt > 1) - phydev->supported &= ~(SUPPORTED_1000baseT_Half | - SUPPORTED_100baseT_Half | - SUPPORTED_10baseT_Half); + if (tx_cnt > 1) { + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_10baseT_Half_BIT); + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_100baseT_Half_BIT); + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_1000baseT_Half_BIT); + } /* * Broken HW is sometimes missing the pull-up resistor on the |