sfc: Update MCDI (firmware interface) definitions

Some commands and constants have been renamed; adjust the code
accordingly.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

1 files changed, 17 insertions, 17 deletions

diff --git a/drivers/net/ethernet/sfc/mcdi_phy.c b/drivers/net/ethernet/sfc/mcdi_phy.c
index 3077bf1e7dfe..7bcad899a936 100644
--- a/drivers/net/ethernet/sfc/mcdi_phy.c
+++ b/drivers/net/ethernet/sfc/mcdi_phy.c
@@ -116,7 +116,7 @@ static int efx_mcdi_loopback_modes(struct efx_nic *efx, u64 *loopback_modes)
 		goto fail;
 	}
 
-	*loopback_modes = MCDI_QWORD(outbuf, GET_LOOPBACK_MODES_SUGGESTED);
+	*loopback_modes = MCDI_QWORD(outbuf, GET_LOOPBACK_MODES_OUT_SUGGESTED);
 
 	return 0;
 
@@ -264,22 +264,22 @@ static u32 efx_get_mcdi_phy_flags(struct efx_nic *efx)
 
 	/* TODO: Advertise the capabilities supported by this PHY */
 	supported = 0;
-	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_TXDIS_LBN))
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_TXDIS_LBN))
 		supported |= PHY_MODE_TX_DISABLED;
-	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_LOWPOWER_LBN))
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_LOWPOWER_LBN))
 		supported |= PHY_MODE_LOW_POWER;
-	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_POWEROFF_LBN))
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_POWEROFF_LBN))
 		supported |= PHY_MODE_OFF;
 
 	mode = efx->phy_mode & supported;
 
 	flags = 0;
 	if (mode & PHY_MODE_TX_DISABLED)
-		flags |= (1 << MC_CMD_SET_LINK_TXDIS_LBN);
+		flags |= (1 << MC_CMD_SET_LINK_IN_TXDIS_LBN);
 	if (mode & PHY_MODE_LOW_POWER)
-		flags |= (1 << MC_CMD_SET_LINK_LOWPOWER_LBN);
+		flags |= (1 << MC_CMD_SET_LINK_IN_LOWPOWER_LBN);
 	if (mode & PHY_MODE_OFF)
-		flags |= (1 << MC_CMD_SET_LINK_POWEROFF_LBN);
+		flags |= (1 << MC_CMD_SET_LINK_IN_POWEROFF_LBN);
 
 	return flags;
 }
@@ -436,8 +436,8 @@ void efx_mcdi_phy_decode_link(struct efx_nic *efx,
 		break;
 	}
 
-	link_state->up = !!(flags & (1 << MC_CMD_GET_LINK_LINK_UP_LBN));
-	link_state->fd = !!(flags & (1 << MC_CMD_GET_LINK_FULL_DUPLEX_LBN));
+	link_state->up = !!(flags & (1 << MC_CMD_GET_LINK_OUT_LINK_UP_LBN));
+	link_state->fd = !!(flags & (1 << MC_CMD_GET_LINK_OUT_FULL_DUPLEX_LBN));
 	link_state->speed = speed;
 }
 
@@ -592,7 +592,7 @@ static int efx_mcdi_phy_test_alive(struct efx_nic *efx)
 
 	if (outlen < MC_CMD_GET_PHY_STATE_OUT_LEN)
 		return -EIO;
-	if (MCDI_DWORD(outbuf, GET_PHY_STATE_STATE) != MC_CMD_PHY_STATE_OK)
+	if (MCDI_DWORD(outbuf, GET_PHY_STATE_OUT_STATE) != MC_CMD_PHY_STATE_OK)
 		return -EINVAL;
 
 	return 0;
@@ -680,7 +680,7 @@ static int efx_mcdi_phy_run_tests(struct efx_nic *efx, int *results,
 	u32 mode;
 	int rc;
 
-	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_BIST_LBN)) {
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_LBN)) {
 		rc = efx_mcdi_bist(efx, MC_CMD_PHY_BIST, results);
 		if (rc < 0)
 			return rc;
@@ -691,15 +691,15 @@ static int efx_mcdi_phy_run_tests(struct efx_nic *efx, int *results,
 	/* If we support both LONG and SHORT, then run each in response to
 	 * break or not. Otherwise, run the one we support */
 	mode = 0;
-	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_LBN)) {
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_SHORT_LBN)) {
 		if ((flags & ETH_TEST_FL_OFFLINE) &&
 		    (phy_cfg->flags &
-		     (1 << MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_LBN)))
+		     (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN)))
 			mode = MC_CMD_PHY_BIST_CABLE_LONG;
 		else
 			mode = MC_CMD_PHY_BIST_CABLE_SHORT;
 	} else if (phy_cfg->flags &
-		   (1 << MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_LBN))
+		   (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN))
 		mode = MC_CMD_PHY_BIST_CABLE_LONG;
 
 	if (mode != 0) {
@@ -717,14 +717,14 @@ static const char *efx_mcdi_phy_test_name(struct efx_nic *efx,
 {
 	struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
 
-	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_BIST_LBN)) {
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_LBN)) {
 		if (index == 0)
 			return "bist";
 		--index;
 	}
 
-	if (phy_cfg->flags & ((1 << MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_LBN) |
-			      (1 << MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_LBN))) {
+	if (phy_cfg->flags & ((1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_SHORT_LBN) |
+			      (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN))) {
 		if (index == 0)
 			return "cable";
 		--index;