Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull more networking fixes from David Miller:

 1) Fix mlx4_en_netpoll implementation, it needs to schedule a NAPI
    context, not synchronize it.  From Chris Mason.

 2) Ipv4 flow input interface should never be zero, it should be
    LOOPBACK_IFINDEX instead.  From Cong Wang and Julian Anastasov.

 3) Properly configure MAC to PHY connection in mvneta devices, from
    Thomas Petazzoni.

 4) sys_recv should use SYSCALL_DEFINE.  From Jan Glauber.

 5) Tunnel driver ioctls do not use the correct namespace, fix from
    Nicolas Dichtel.

 6) Fix memory leak on seccomp filter attach, from Kees Cook.

 7) Fix lockdep warning for nested vlans, from Ding Tianhong.

 8) Crashes can happen in SCTP due to how the auth_enable value is
    managed, fix from Vlad Yasevich.

 9) Wireless fixes from John W Linville and co.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
  net: sctp: cache auth_enable per endpoint
  tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled
  vlan: Fix lockdep warning when vlan dev handle notification
  seccomp: fix memory leak on filter attach
  isdn: icn: buffer overflow in icn_command()
  ip6_tunnel: use the right netns in ioctl handler
  sit: use the right netns in ioctl handler
  ip_tunnel: use the right netns in ioctl handler
  net: use SYSCALL_DEFINEx for sys_recv
  net: mdio-gpio: Add support for separate MDI and MDO gpio pins
  net: mdio-gpio: Add support for active low gpio pins
  net: mdio-gpio: Use devm_ functions where possible
  ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source()
  ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif
  mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll
  net: mvneta: properly configure the MAC <-> PHY connection in all situations
  net: phy: add minimal support for QSGMII PHY
  sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)
  mwifiex: fix hung task on command timeout
  mwifiex: process event before command response
  ...

1 files changed, 11 insertions, 1 deletions

diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c
index 21c20ea0dad0..b5ed30a39144 100644
--- a/drivers/net/ethernet/sfc/ef10.c
+++ b/drivers/net/ethernet/sfc/ef10.c
@@ -738,8 +738,11 @@ static int efx_ef10_reset(struct efx_nic *efx, enum reset_type reset_type)
 	/* If it was a port reset, trigger reallocation of MC resources.
 	 * Note that on an MC reset nothing needs to be done now because we'll
 	 * detect the MC reset later and handle it then.
+	 * For an FLR, we never get an MC reset event, but the MC has reset all
+	 * resources assigned to us, so we have to trigger reallocation now.
 	 */
-	if (reset_type == RESET_TYPE_ALL && !rc)
+	if ((reset_type == RESET_TYPE_ALL ||
+	     reset_type == RESET_TYPE_MCDI_TIMEOUT) && !rc)
 		efx_ef10_reset_mc_allocations(efx);
 	return rc;
 }
@@ -2141,6 +2144,11 @@ static int efx_ef10_fini_dmaq(struct efx_nic *efx)
 	return 0;
 }
 
+static void efx_ef10_prepare_flr(struct efx_nic *efx)
+{
+	atomic_set(&efx->active_queues, 0);
+}
+
 static bool efx_ef10_filter_equal(const struct efx_filter_spec *left,
 				  const struct efx_filter_spec *right)
 {
@@ -3603,6 +3611,8 @@ const struct efx_nic_type efx_hunt_a0_nic_type = {
 	.probe_port = efx_mcdi_port_probe,
 	.remove_port = efx_mcdi_port_remove,
 	.fini_dmaq = efx_ef10_fini_dmaq,
+	.prepare_flr = efx_ef10_prepare_flr,
+	.finish_flr = efx_port_dummy_op_void,
 	.describe_stats = efx_ef10_describe_stats,
 	.update_stats = efx_ef10_update_stats,
 	.start_stats = efx_mcdi_mac_start_stats,