summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/realtek/atp.h
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-05-19 23:27:55 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-11 16:29:42 -0700
commita8fe65b8f031c5c0a7414059773eaa962e5243cb (patch)
tree7deefb4ca57299d315cf2e3f97b9919857eaacb4 /drivers/net/ethernet/realtek/atp.h
parentbaf0fbfe7ea34cd676e3362a62033d8ca1c52d99 (diff)
downloadlinux-a8fe65b8f031c5c0a7414059773eaa962e5243cb.tar.bz2
8139*/atp/r8169/sc92031: Move the Realtek drivers
Move the Realtek drivers into drivers/net/ethernet/realtek/ and make the necessary Kconfig and Makefile changes. CC: Realtek linux nic maintainers <nic_swsd@realtek.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Jeff Garzik <jgarzik@pobox.com> CC: Donald Becker <becker@scyld.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/realtek/atp.h')
-rw-r--r--drivers/net/ethernet/realtek/atp.h259
1 files changed, 259 insertions, 0 deletions
diff --git a/drivers/net/ethernet/realtek/atp.h b/drivers/net/ethernet/realtek/atp.h
new file mode 100644
index 000000000000..0edc642c2c2f
--- /dev/null
+++ b/drivers/net/ethernet/realtek/atp.h
@@ -0,0 +1,259 @@
+/* Linux header file for the ATP pocket ethernet adapter. */
+/* v1.09 8/9/2000 becker@scyld.com. */
+
+#include <linux/if_ether.h>
+#include <linux/types.h>
+
+/* The header prepended to received packets. */
+struct rx_header {
+ ushort pad; /* Pad. */
+ ushort rx_count;
+ ushort rx_status; /* Unknown bit assignments :-<. */
+ ushort cur_addr; /* Apparently the current buffer address(?) */
+};
+
+#define PAR_DATA 0
+#define PAR_STATUS 1
+#define PAR_CONTROL 2
+
+enum chip_type { RTL8002, RTL8012 };
+
+#define Ctrl_LNibRead 0x08 /* LP_PSELECP */
+#define Ctrl_HNibRead 0
+#define Ctrl_LNibWrite 0x08 /* LP_PSELECP */
+#define Ctrl_HNibWrite 0
+#define Ctrl_SelData 0x04 /* LP_PINITP */
+#define Ctrl_IRQEN 0x10 /* LP_PINTEN */
+
+#define EOW 0xE0
+#define EOC 0xE0
+#define WrAddr 0x40 /* Set address of EPLC read, write register. */
+#define RdAddr 0xC0
+#define HNib 0x10
+
+enum page0_regs
+{
+ /* The first six registers hold the ethernet physical station address. */
+ PAR0 = 0, PAR1 = 1, PAR2 = 2, PAR3 = 3, PAR4 = 4, PAR5 = 5,
+ TxCNT0 = 6, TxCNT1 = 7, /* The transmit byte count. */
+ TxSTAT = 8, RxSTAT = 9, /* Tx and Rx status. */
+ ISR = 10, IMR = 11, /* Interrupt status and mask. */
+ CMR1 = 12, /* Command register 1. */
+ CMR2 = 13, /* Command register 2. */
+ MODSEL = 14, /* Mode select register. */
+ MAR = 14, /* Memory address register (?). */
+ CMR2_h = 0x1d, };
+
+enum eepage_regs
+{ PROM_CMD = 6, PROM_DATA = 7 }; /* Note that PROM_CMD is in the "high" bits. */
+
+
+#define ISR_TxOK 0x01
+#define ISR_RxOK 0x04
+#define ISR_TxErr 0x02
+#define ISRh_RxErr 0x11 /* ISR, high nibble */
+
+#define CMR1h_MUX 0x08 /* Select printer multiplexor on 8012. */
+#define CMR1h_RESET 0x04 /* Reset. */
+#define CMR1h_RxENABLE 0x02 /* Rx unit enable. */
+#define CMR1h_TxENABLE 0x01 /* Tx unit enable. */
+#define CMR1h_TxRxOFF 0x00
+#define CMR1_ReXmit 0x08 /* Trigger a retransmit. */
+#define CMR1_Xmit 0x04 /* Trigger a transmit. */
+#define CMR1_IRQ 0x02 /* Interrupt active. */
+#define CMR1_BufEnb 0x01 /* Enable the buffer(?). */
+#define CMR1_NextPkt 0x01 /* Enable the buffer(?). */
+
+#define CMR2_NULL 8
+#define CMR2_IRQOUT 9
+#define CMR2_RAMTEST 10
+#define CMR2_EEPROM 12 /* Set to page 1, for reading the EEPROM. */
+
+#define CMR2h_OFF 0 /* No accept mode. */
+#define CMR2h_Physical 1 /* Accept a physical address match only. */
+#define CMR2h_Normal 2 /* Accept physical and broadcast address. */
+#define CMR2h_PROMISC 3 /* Promiscuous mode. */
+
+/* An inline function used below: it differs from inb() by explicitly return an unsigned
+ char, saving a truncation. */
+static inline unsigned char inbyte(unsigned short port)
+{
+ unsigned char _v;
+ __asm__ __volatile__ ("inb %w1,%b0" :"=a" (_v):"d" (port));
+ return _v;
+}
+
+/* Read register OFFSET.
+ This command should always be terminated with read_end(). */
+static inline unsigned char read_nibble(short port, unsigned char offset)
+{
+ unsigned char retval;
+ outb(EOC+offset, port + PAR_DATA);
+ outb(RdAddr+offset, port + PAR_DATA);
+ inbyte(port + PAR_STATUS); /* Settling time delay */
+ retval = inbyte(port + PAR_STATUS);
+ outb(EOC+offset, port + PAR_DATA);
+
+ return retval;
+}
+
+/* Functions for bulk data read. The interrupt line is always disabled. */
+/* Get a byte using read mode 0, reading data from the control lines. */
+static inline unsigned char read_byte_mode0(short ioaddr)
+{
+ unsigned char low_nib;
+
+ outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL);
+ inbyte(ioaddr + PAR_STATUS);
+ low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+ outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL);
+ inbyte(ioaddr + PAR_STATUS); /* Settling time delay -- needed! */
+ inbyte(ioaddr + PAR_STATUS); /* Settling time delay -- needed! */
+ return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+/* The same as read_byte_mode0(), but does multiple inb()s for stability. */
+static inline unsigned char read_byte_mode2(short ioaddr)
+{
+ unsigned char low_nib;
+
+ outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL);
+ inbyte(ioaddr + PAR_STATUS);
+ low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+ outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL);
+ inbyte(ioaddr + PAR_STATUS); /* Settling time delay -- needed! */
+ return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+/* Read a byte through the data register. */
+static inline unsigned char read_byte_mode4(short ioaddr)
+{
+ unsigned char low_nib;
+
+ outb(RdAddr | MAR, ioaddr + PAR_DATA);
+ low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+ outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA);
+ return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+/* Read a byte through the data register, double reading to allow settling. */
+static inline unsigned char read_byte_mode6(short ioaddr)
+{
+ unsigned char low_nib;
+
+ outb(RdAddr | MAR, ioaddr + PAR_DATA);
+ inbyte(ioaddr + PAR_STATUS);
+ low_nib = (inbyte(ioaddr + PAR_STATUS) >> 3) & 0x0f;
+ outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA);
+ inbyte(ioaddr + PAR_STATUS);
+ return low_nib | ((inbyte(ioaddr + PAR_STATUS) << 1) & 0xf0);
+}
+
+static inline void
+write_reg(short port, unsigned char reg, unsigned char value)
+{
+ unsigned char outval;
+ outb(EOC | reg, port + PAR_DATA);
+ outval = WrAddr | reg;
+ outb(outval, port + PAR_DATA);
+ outb(outval, port + PAR_DATA); /* Double write for PS/2. */
+
+ outval &= 0xf0;
+ outval |= value;
+ outb(outval, port + PAR_DATA);
+ outval &= 0x1f;
+ outb(outval, port + PAR_DATA);
+ outb(outval, port + PAR_DATA);
+
+ outb(EOC | outval, port + PAR_DATA);
+}
+
+static inline void
+write_reg_high(short port, unsigned char reg, unsigned char value)
+{
+ unsigned char outval = EOC | HNib | reg;
+
+ outb(outval, port + PAR_DATA);
+ outval &= WrAddr | HNib | 0x0f;
+ outb(outval, port + PAR_DATA);
+ outb(outval, port + PAR_DATA); /* Double write for PS/2. */
+
+ outval = WrAddr | HNib | value;
+ outb(outval, port + PAR_DATA);
+ outval &= HNib | 0x0f; /* HNib | value */
+ outb(outval, port + PAR_DATA);
+ outb(outval, port + PAR_DATA);
+
+ outb(EOC | HNib | outval, port + PAR_DATA);
+}
+
+/* Write a byte out using nibble mode. The low nibble is written first. */
+static inline void
+write_reg_byte(short port, unsigned char reg, unsigned char value)
+{
+ unsigned char outval;
+ outb(EOC | reg, port + PAR_DATA); /* Reset the address register. */
+ outval = WrAddr | reg;
+ outb(outval, port + PAR_DATA);
+ outb(outval, port + PAR_DATA); /* Double write for PS/2. */
+
+ outb((outval & 0xf0) | (value & 0x0f), port + PAR_DATA);
+ outb(value & 0x0f, port + PAR_DATA);
+ value >>= 4;
+ outb(value, port + PAR_DATA);
+ outb(0x10 | value, port + PAR_DATA);
+ outb(0x10 | value, port + PAR_DATA);
+
+ outb(EOC | value, port + PAR_DATA); /* Reset the address register. */
+}
+
+/*
+ * Bulk data writes to the packet buffer. The interrupt line remains enabled.
+ * The first, faster method uses only the dataport (data modes 0, 2 & 4).
+ * The second (backup) method uses data and control regs (modes 1, 3 & 5).
+ * It should only be needed when there is skew between the individual data
+ * lines.
+ */
+static inline void write_byte_mode0(short ioaddr, unsigned char value)
+{
+ outb(value & 0x0f, ioaddr + PAR_DATA);
+ outb((value>>4) | 0x10, ioaddr + PAR_DATA);
+}
+
+static inline void write_byte_mode1(short ioaddr, unsigned char value)
+{
+ outb(value & 0x0f, ioaddr + PAR_DATA);
+ outb(Ctrl_IRQEN | Ctrl_LNibWrite, ioaddr + PAR_CONTROL);
+ outb((value>>4) | 0x10, ioaddr + PAR_DATA);
+ outb(Ctrl_IRQEN | Ctrl_HNibWrite, ioaddr + PAR_CONTROL);
+}
+
+/* Write 16bit VALUE to the packet buffer: the same as above just doubled. */
+static inline void write_word_mode0(short ioaddr, unsigned short value)
+{
+ outb(value & 0x0f, ioaddr + PAR_DATA);
+ value >>= 4;
+ outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA);
+ value >>= 4;
+ outb(value & 0x0f, ioaddr + PAR_DATA);
+ value >>= 4;
+ outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA);
+}
+
+/* EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
+#define EE_CS 0x02 /* EEPROM chip select. */
+#define EE_CLK_HIGH 0x12
+#define EE_CLK_LOW 0x16
+#define EE_DATA_WRITE 0x01 /* EEPROM chip data in. */
+#define EE_DATA_READ 0x08 /* EEPROM chip data out. */
+
+/* Delay between EEPROM clock transitions. */
+#define eeprom_delay(ticks) \
+do { int _i = 40; while (--_i > 0) { __SLOW_DOWN_IO; }} while (0)
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD(offset) (((5 << 6) + (offset)) << 17)
+#define EE_READ(offset) (((6 << 6) + (offset)) << 17)
+#define EE_ERASE(offset) (((7 << 6) + (offset)) << 17)
+#define EE_CMD_SIZE 27 /* The command+address+data size. */