qed: Add infrastructure for error detection and recovery

This patch adds the detection and handling of a parity error ("process kill
event"), including the update of the protocol drivers, and the prevention
of any HW access that will lead to device access towards the host while
recovery is in progress.
It also provides the means for the protocol drivers to trigger a recovery
process on their decision.

Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 27 insertions, 14 deletions

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index fa5f07e65672..b17003d9066c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -2140,6 +2140,11 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)
 			   "Load request was sent. Load code: 0x%x\n",
 			   load_code);
 
+		/* Only relevant for recovery:
+		 * Clear the indication after LOAD_REQ is responded by the MFW.
+		 */
+		cdev->recov_in_prog = false;
+
 		qed_mcp_set_capabilities(p_hwfn, p_hwfn->p_main_ptt);
 
 		qed_reset_mb_shadow(p_hwfn, p_hwfn->p_main_ptt);
@@ -2291,6 +2296,9 @@ static void qed_hw_timers_stop(struct qed_dev *cdev,
 	qed_wr(p_hwfn, p_ptt, TM_REG_PF_ENABLE_CONN, 0x0);
 	qed_wr(p_hwfn, p_ptt, TM_REG_PF_ENABLE_TASK, 0x0);
 
+	if (cdev->recov_in_prog)
+		return;
+
 	for (i = 0; i < QED_HW_STOP_RETRY_LIMIT; i++) {
 		if ((!qed_rd(p_hwfn, p_ptt,
 			     TM_REG_PF_SCAN_ACTIVE_CONN)) &&
@@ -2353,12 +2361,14 @@ int qed_hw_stop(struct qed_dev *cdev)
 		p_hwfn->hw_init_done = false;
 
 		/* Send unload command to MCP */
-		rc = qed_mcp_unload_req(p_hwfn, p_ptt);
-		if (rc) {
-			DP_NOTICE(p_hwfn,
-				  "Failed sending a UNLOAD_REQ command. rc = %d.\n",
-				  rc);
-			rc2 = -EINVAL;
+		if (!cdev->recov_in_prog) {
+			rc = qed_mcp_unload_req(p_hwfn, p_ptt);
+			if (rc) {
+				DP_NOTICE(p_hwfn,
+					  "Failed sending a UNLOAD_REQ command. rc = %d.\n",
+					  rc);
+				rc2 = -EINVAL;
+			}
 		}
 
 		qed_slowpath_irq_sync(p_hwfn);
@@ -2400,16 +2410,18 @@ int qed_hw_stop(struct qed_dev *cdev)
 		qed_wr(p_hwfn, p_ptt, DORQ_REG_PF_DB_ENABLE, 0);
 		qed_wr(p_hwfn, p_ptt, QM_REG_PF_EN, 0);
 
-		qed_mcp_unload_done(p_hwfn, p_ptt);
-		if (rc) {
-			DP_NOTICE(p_hwfn,
-				  "Failed sending a UNLOAD_DONE command. rc = %d.\n",
-				  rc);
-			rc2 = -EINVAL;
+		if (!cdev->recov_in_prog) {
+			rc = qed_mcp_unload_done(p_hwfn, p_ptt);
+			if (rc) {
+				DP_NOTICE(p_hwfn,
+					  "Failed sending a UNLOAD_DONE command. rc = %d.\n",
+					  rc);
+				rc2 = -EINVAL;
+			}
 		}
 	}
 
-	if (IS_PF(cdev)) {
+	if (IS_PF(cdev) && !cdev->recov_in_prog) {
 		p_hwfn = QED_LEADING_HWFN(cdev);
 		p_ptt = QED_LEADING_HWFN(cdev)->p_main_ptt;
 
@@ -3459,6 +3471,7 @@ static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
 				 void __iomem *p_doorbells,
 				 enum qed_pci_personality personality)
 {
+	struct qed_dev *cdev = p_hwfn->cdev;
 	int rc = 0;
 
 	/* Split PCI bars evenly between hwfns */
@@ -3511,7 +3524,7 @@ static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
 	/* Sending a mailbox to the MFW should be done after qed_get_hw_info()
 	 * is called as it sets the ports number in an engine.
 	 */
-	if (IS_LEAD_HWFN(p_hwfn)) {
+	if (IS_LEAD_HWFN(p_hwfn) && !cdev->recov_in_prog) {
 		rc = qed_mcp_initiate_pf_flr(p_hwfn, p_hwfn->p_main_ptt);
 		if (rc)
 			DP_NOTICE(p_hwfn, "Failed to initiate PF FLR\n");