Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

1 files changed, 0 insertions, 262 deletions

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
deleted file mode 100644
index 51250363566b..000000000000
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#include "pch_gbe.h"
-#include "pch_gbe_phy.h"
-#include "pch_gbe_api.h"
-
-/* bus type values */
-#define pch_gbe_bus_type_unknown	0
-#define pch_gbe_bus_type_pci		1
-#define pch_gbe_bus_type_pcix		2
-#define pch_gbe_bus_type_pci_express	3
-#define pch_gbe_bus_type_reserved	4
-
-/* bus speed values */
-#define pch_gbe_bus_speed_unknown	0
-#define pch_gbe_bus_speed_33		1
-#define pch_gbe_bus_speed_66		2
-#define pch_gbe_bus_speed_100		3
-#define pch_gbe_bus_speed_120		4
-#define pch_gbe_bus_speed_133		5
-#define pch_gbe_bus_speed_2500		6
-#define pch_gbe_bus_speed_reserved	7
-
-/* bus width values */
-#define pch_gbe_bus_width_unknown	0
-#define pch_gbe_bus_width_pcie_x1	1
-#define pch_gbe_bus_width_pcie_x2	2
-#define pch_gbe_bus_width_pcie_x4	4
-#define pch_gbe_bus_width_32		5
-#define pch_gbe_bus_width_64		6
-#define pch_gbe_bus_width_reserved	7
-
-/**
- * pch_gbe_plat_get_bus_info - Obtain bus information for adapter
- * @hw:	Pointer to the HW structure
- */
-static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
-{
-	hw->bus.type  = pch_gbe_bus_type_pci_express;
-	hw->bus.speed = pch_gbe_bus_speed_2500;
-	hw->bus.width = pch_gbe_bus_width_pcie_x1;
-}
-
-/**
- * pch_gbe_plat_init_hw - Initialize hardware
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:		Successfully
- *	Negative value:	Failed-EBUSY
- */
-static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
-{
-	s32 ret_val;
-
-	ret_val = pch_gbe_phy_get_id(hw);
-	if (ret_val) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
-		return ret_val;
-	}
-	pch_gbe_phy_init_setting(hw);
-	/* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
-	pch_gbe_phy_set_rgmii(hw);
-#endif
-	return ret_val;
-}
-
-static const struct pch_gbe_functions pch_gbe_ops = {
-	.get_bus_info      = pch_gbe_plat_get_bus_info,
-	.init_hw           = pch_gbe_plat_init_hw,
-	.read_phy_reg      = pch_gbe_phy_read_reg_miic,
-	.write_phy_reg     = pch_gbe_phy_write_reg_miic,
-	.reset_phy         = pch_gbe_phy_hw_reset,
-	.sw_reset_phy      = pch_gbe_phy_sw_reset,
-	.power_up_phy      = pch_gbe_phy_power_up,
-	.power_down_phy    = pch_gbe_phy_power_down,
-	.read_mac_addr     = pch_gbe_mac_read_mac_addr
-};
-
-/**
- * pch_gbe_plat_init_function_pointers - Init func ptrs
- * @hw:	Pointer to the HW structure
- */
-static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
-{
-	/* Set PHY parameter */
-	hw->phy.reset_delay_us     = PCH_GBE_PHY_RESET_DELAY_US;
-	/* Set function pointers */
-	hw->func = &pch_gbe_ops;
-}
-
-/**
- * pch_gbe_hal_setup_init_funcs - Initializes function pointers
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
-{
-	if (!hw->reg) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: Registers not mapped\n");
-		return -ENOSYS;
-	}
-	pch_gbe_plat_init_function_pointers(hw);
-	return 0;
-}
-
-/**
- * pch_gbe_hal_get_bus_info - Obtain bus information for adapter
- * @hw:	Pointer to the HW structure
- */
-void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->get_bus_info) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return;
-	}
-	hw->func->get_bus_info(hw);
-}
-
-/**
- * pch_gbe_hal_init_hw - Initialize hardware
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->init_hw) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return -ENOSYS;
-	}
-	return hw->func->init_hw(hw);
-}
-
-/**
- * pch_gbe_hal_read_phy_reg - Reads PHY register
- * @hw:	    Pointer to the HW structure
- * @offset: The register to read
- * @data:   The buffer to store the 16-bit read.
- * Returns:
- *	0:	Successfully
- *	Negative value:	Failed
- */
-s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
-					u16 *data)
-{
-	if (!hw->func->read_phy_reg)
-		return 0;
-	return hw->func->read_phy_reg(hw, offset, data);
-}
-
-/**
- * pch_gbe_hal_write_phy_reg - Writes PHY register
- * @hw:	    Pointer to the HW structure
- * @offset: The register to read
- * @data:   The value to write.
- * Returns:
- *	0:	Successfully
- *	Negative value:	Failed
- */
-s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
-					u16 data)
-{
-	if (!hw->func->write_phy_reg)
-		return 0;
-	return hw->func->write_phy_reg(hw, offset, data);
-}
-
-/**
- * pch_gbe_hal_phy_hw_reset - Hard PHY reset
- * @hw:	    Pointer to the HW structure
- */
-void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->reset_phy) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return;
-	}
-	hw->func->reset_phy(hw);
-}
-
-/**
- * pch_gbe_hal_phy_sw_reset - Soft PHY reset
- * @hw:	    Pointer to the HW structure
- */
-void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->sw_reset_phy) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return;
-	}
-	hw->func->sw_reset_phy(hw);
-}
-
-/**
- * pch_gbe_hal_read_mac_addr - Reads MAC address
- * @hw:	Pointer to the HW structure
- * Returns:
- *	0:	Successfully
- *	ENOSYS:	Function is not registered
- */
-s32 pch_gbe_hal_read_mac_addr(struct pch_gbe_hw *hw)
-{
-	if (!hw->func->read_mac_addr) {
-		struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
-		netdev_err(adapter->netdev, "ERROR: configuration\n");
-		return -ENOSYS;
-	}
-	return hw->func->read_mac_addr(hw);
-}
-
-/**
- * pch_gbe_hal_power_up_phy - Power up PHY
- * @hw:	Pointer to the HW structure
- */
-void pch_gbe_hal_power_up_phy(struct pch_gbe_hw *hw)
-{
-	if (hw->func->power_up_phy)
-		hw->func->power_up_phy(hw);
-}
-
-/**
- * pch_gbe_hal_power_down_phy - Power down PHY
- * @hw:	Pointer to the HW structure
- */
-void pch_gbe_hal_power_down_phy(struct pch_gbe_hw *hw)
-{
-	if (hw->func->power_down_phy)
-		hw->func->power_down_phy(hw);
-}