diff options
author | Russell King <rmk+kernel@armlinux.org.uk> | 2020-02-26 10:24:17 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2020-02-27 12:02:14 -0800 |
commit | 24cb72df1a823d0cf188d5e81d6dd1cd0d05a99a (patch) | |
tree | a3155288647548d0dcf215b47f3ab0828ef9f4fe /drivers/net/ethernet/marvell/mvpp2 | |
parent | ff03f0b152ef55b9badede83203a2ac56eefb452 (diff) | |
download | linux-24cb72df1a823d0cf188d5e81d6dd1cd0d05a99a.tar.bz2 |
net: mvpp2: use resolved link config in mac_link_up()
Convert the Marvell mvpp2 ethernet driver to use the finalised link
parameters in mac_link_up() rather than the parameters in mac_config().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/marvell/mvpp2')
-rw-r--r-- | drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 83 |
1 files changed, 47 insertions, 36 deletions
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index ed8042d97e29..6b9c7ed2547e 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -4976,15 +4976,13 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, old_ctrl2 = ctrl2 = readl(port->base + MVPP2_GMAC_CTRL_2_REG); old_ctrl4 = ctrl4 = readl(port->base + MVPP22_GMAC_CTRL_4_REG); - an &= ~(MVPP2_GMAC_CONFIG_MII_SPEED | MVPP2_GMAC_CONFIG_GMII_SPEED | - MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_FC_ADV_EN | + an &= ~(MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_FC_ADV_EN | MVPP2_GMAC_FC_ADV_ASM_EN | MVPP2_GMAC_FLOW_CTRL_AUTONEG | - MVPP2_GMAC_CONFIG_FULL_DUPLEX | MVPP2_GMAC_AN_DUPLEX_EN | - MVPP2_GMAC_IN_BAND_AUTONEG | MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS); + MVPP2_GMAC_AN_DUPLEX_EN | MVPP2_GMAC_IN_BAND_AUTONEG | + MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS); ctrl0 &= ~MVPP2_GMAC_PORT_TYPE_MASK; ctrl2 &= ~(MVPP2_GMAC_INBAND_AN_MASK | MVPP2_GMAC_PORT_RESET_MASK | MVPP2_GMAC_PCS_ENABLE_MASK); - ctrl4 &= ~(MVPP22_CTRL4_RX_FC_EN | MVPP22_CTRL4_TX_FC_EN); /* Configure port type */ if (phy_interface_mode_is_8023z(state->interface)) { @@ -5014,31 +5012,20 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, /* Configure negotiation style */ if (!phylink_autoneg_inband(mode)) { - /* Phy or fixed speed - no in-band AN */ - if (state->duplex) - an |= MVPP2_GMAC_CONFIG_FULL_DUPLEX; - - if (state->speed == SPEED_1000 || state->speed == SPEED_2500) - an |= MVPP2_GMAC_CONFIG_GMII_SPEED; - else if (state->speed == SPEED_100) - an |= MVPP2_GMAC_CONFIG_MII_SPEED; - - if (state->pause & MLO_PAUSE_TX) - ctrl4 |= MVPP22_CTRL4_TX_FC_EN; - if (state->pause & MLO_PAUSE_RX) - ctrl4 |= MVPP22_CTRL4_RX_FC_EN; + /* Phy or fixed speed - no in-band AN, nothing to do, leave the + * configured speed, duplex and flow control as-is. + */ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { /* SGMII in-band mode receives the speed and duplex from * the PHY. Flow control information is not received. */ - an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | MVPP2_GMAC_FORCE_LINK_PASS); + an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | + MVPP2_GMAC_FORCE_LINK_PASS | + MVPP2_GMAC_CONFIG_MII_SPEED | + MVPP2_GMAC_CONFIG_GMII_SPEED | + MVPP2_GMAC_CONFIG_FULL_DUPLEX); an |= MVPP2_GMAC_IN_BAND_AUTONEG | MVPP2_GMAC_AN_SPEED_EN | MVPP2_GMAC_AN_DUPLEX_EN; - - if (state->pause & MLO_PAUSE_TX) - ctrl4 |= MVPP22_CTRL4_TX_FC_EN; - if (state->pause & MLO_PAUSE_RX) - ctrl4 |= MVPP22_CTRL4_RX_FC_EN; } else if (phy_interface_mode_is_8023z(state->interface)) { /* 1000BaseX and 2500BaseX ports cannot negotiate speed nor can * they negotiate duplex: they are always operating with a fixed @@ -5046,19 +5033,17 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode, * speed and full duplex here. */ ctrl0 |= MVPP2_GMAC_PORT_TYPE_MASK; - an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | MVPP2_GMAC_FORCE_LINK_PASS); + an &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | + MVPP2_GMAC_FORCE_LINK_PASS | + MVPP2_GMAC_CONFIG_MII_SPEED | + MVPP2_GMAC_CONFIG_GMII_SPEED | + MVPP2_GMAC_CONFIG_FULL_DUPLEX); an |= MVPP2_GMAC_IN_BAND_AUTONEG | MVPP2_GMAC_CONFIG_GMII_SPEED | MVPP2_GMAC_CONFIG_FULL_DUPLEX; - if (state->pause & MLO_PAUSE_AN && state->an_enabled) { + if (state->pause & MLO_PAUSE_AN && state->an_enabled) an |= MVPP2_GMAC_FLOW_CTRL_AUTONEG; - } else { - if (state->pause & MLO_PAUSE_TX) - ctrl4 |= MVPP22_CTRL4_TX_FC_EN; - if (state->pause & MLO_PAUSE_RX) - ctrl4 |= MVPP22_CTRL4_RX_FC_EN; - } } /* Some fields of the auto-negotiation register require the port to be down when @@ -5155,18 +5140,44 @@ static void mvpp2_mac_link_up(struct phylink_config *config, struct mvpp2_port *port = netdev_priv(dev); u32 val; - if (!phylink_autoneg_inband(mode)) { - if (mvpp2_is_xlg(interface)) { + if (mvpp2_is_xlg(interface)) { + if (!phylink_autoneg_inband(mode)) { val = readl(port->base + MVPP22_XLG_CTRL0_REG); val &= ~MVPP22_XLG_CTRL0_FORCE_LINK_DOWN; val |= MVPP22_XLG_CTRL0_FORCE_LINK_PASS; writel(val, port->base + MVPP22_XLG_CTRL0_REG); - } else { + } + } else { + if (!phylink_autoneg_inband(mode)) { val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG); - val &= ~MVPP2_GMAC_FORCE_LINK_DOWN; + val &= ~(MVPP2_GMAC_FORCE_LINK_DOWN | + MVPP2_GMAC_CONFIG_MII_SPEED | + MVPP2_GMAC_CONFIG_GMII_SPEED | + MVPP2_GMAC_CONFIG_FULL_DUPLEX); val |= MVPP2_GMAC_FORCE_LINK_PASS; + + if (speed == SPEED_1000 || speed == SPEED_2500) + val |= MVPP2_GMAC_CONFIG_GMII_SPEED; + else if (speed == SPEED_100) + val |= MVPP2_GMAC_CONFIG_MII_SPEED; + + if (duplex == DUPLEX_FULL) + val |= MVPP2_GMAC_CONFIG_FULL_DUPLEX; + writel(val, port->base + MVPP2_GMAC_AUTONEG_CONFIG); } + + /* We can always update the flow control enable bits; + * these will only be effective if flow control AN + * (MVPP2_GMAC_FLOW_CTRL_AUTONEG) is disabled. + */ + val = readl(port->base + MVPP22_GMAC_CTRL_4_REG); + val &= ~(MVPP22_CTRL4_RX_FC_EN | MVPP22_CTRL4_TX_FC_EN); + if (tx_pause) + val |= MVPP22_CTRL4_TX_FC_EN; + if (rx_pause) + val |= MVPP22_CTRL4_RX_FC_EN; + writel(val, port->base + MVPP22_GMAC_CTRL_4_REG); } mvpp2_port_enable(port); |