ixgbe: Add X553 FW ALEF support

This patch add X553 FW ALEF support for B0.  ALEF is the new unified
FW.  This contains updated register defines for ALEF speed
configuration.  Likewise it also removes the AN_CNTL_8 usage from
the native SFI flow as it is no longer supported by FW.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 173 insertions, 66 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 252e52d7c03d..11fb433eb924 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1281,6 +1281,53 @@ static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw)
 	return status;
 }
 
+/**
+ *  ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the
+ *  internal PHY
+ *  @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u32 link_ctrl;
+
+	/* Restart auto-negotiation. */
+	status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl);
+
+	if (status) {
+		hw_dbg(hw, "Auto-negotiation did not complete\n");
+		return status;
+	}
+
+	link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	status = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl);
+
+	if (hw->mac.type == ixgbe_mac_x550em_a) {
+		u32 flx_mask_st20;
+
+		/* Indicate to FW that AN restart has been asserted */
+		status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20);
+
+		if (status) {
+			hw_dbg(hw, "Auto-negotiation did not complete\n");
+			return status;
+		}
+
+		flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART;
+		status = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20);
+	}
+
+	return status;
+}
+
 /** ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
  *  @hw: pointer to hardware structure
  *  @speed: the link speed to force
@@ -1330,16 +1377,7 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
 	}
 
 	/* Toggle port SW reset by AN reset. */
-	status = ixgbe_read_iosf_sb_reg_x550(hw,
-				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
-	if (status)
-		return status;
-
-	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
-	status = ixgbe_write_iosf_sb_reg_x550(hw,
-				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	status = ixgbe_restart_an_internal_phy_x550em(hw);
 
 	return status;
 }
@@ -1423,6 +1461,55 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 }
 
 /**
+ * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode
+ * @hw: pointer to hardware structure
+ * @speed: the link speed to force
+ *
+ * Configures the integrated PHY for native SFI mode. Used to connect the
+ * internal PHY directly to an SFP cage, without autonegotiation.
+ **/
+static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	s32 status;
+	u32 reg_val;
+
+	/* Disable all AN and force speed to 10G Serial. */
+	status = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+	if (status)
+		return status;
+
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+	reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+
+	/* Select forced link speed for internal PHY. */
+	switch (*speed) {
+	case IXGBE_LINK_SPEED_10GB_FULL:
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G;
+		break;
+	case IXGBE_LINK_SPEED_1GB_FULL:
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
+		break;
+	default:
+		/* Other link speeds are not supported by internal PHY. */
+		return IXGBE_ERR_LINK_SETUP;
+	}
+
+	status = mac->ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+
+	/* Toggle port SW reset by AN reset. */
+	status = ixgbe_restart_an_internal_phy_x550em(hw);
+
+	return status;
+}
+
+/**
  * ixgbe_setup_mac_link_sfp_n - Setup internal PHY for native SFP
  * @hw: pointer to hardware structure
  *
@@ -1434,45 +1521,39 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 {
 	bool setup_linear = false;
 	u32 reg_phy_int;
-	s32 rc;
+	s32 ret_val;
 
 	/* Check if SFP module is supported and linear */
-	rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
 
 	/* If no SFP module present, then return success. Return success since
 	 * SFP not present error is not excepted in the setup MAC link flow.
 	 */
-	if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
+	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
 		return 0;
 
-	if (!rc)
-		return rc;
+	if (!ret_val)
+		return ret_val;
 
-	/* Configure internal PHY for native SFI */
-	rc = hw->mac.ops.read_iosf_sb_reg(hw,
-					  IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
-					  IXGBE_SB_IOSF_TARGET_KR_PHY,
-					  &reg_phy_int);
-	if (rc)
-		return rc;
+	/* Configure internal PHY for native SFI based on module type */
+	ret_val = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_phy_int);
+	if (!ret_val)
+		return ret_val;
 
-	if (setup_linear) {
-		reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LIMITING;
-		reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LINEAR;
-	} else {
-		reg_phy_int |= IXGBE_KRM_AN_CNTL_8_LIMITING;
-		reg_phy_int &= ~IXGBE_KRM_AN_CNTL_8_LINEAR;
-	}
+	reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA;
+	if (!setup_linear)
+		reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR;
 
-	rc = hw->mac.ops.write_iosf_sb_reg(hw,
-					   IXGBE_KRM_AN_CNTL_8(hw->bus.lan_id),
-					   IXGBE_SB_IOSF_TARGET_KR_PHY,
-					   reg_phy_int);
-	if (rc)
-		return rc;
+	ret_val = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int);
+	if (!ret_val)
+		return ret_val;
 
-	/* Setup XFI/SFI internal link */
-	return ixgbe_setup_ixfi_x550em(hw, &speed);
+	/* Setup SFI internal link. */
+	return ixgbe_setup_sfi_x550a(hw, &speed);
 }
 
 /**
@@ -1488,19 +1569,19 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 	u32 reg_slice, slice_offset;
 	bool setup_linear = false;
 	u16 reg_phy_ext;
-	s32 rc;
+	s32 ret_val;
 
 	/* Check if SFP module is supported and linear */
-	rc = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
+	ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear);
 
 	/* If no SFP module present, then return success. Return success since
 	 * SFP not present error is not excepted in the setup MAC link flow.
 	 */
-	if (rc == IXGBE_ERR_SFP_NOT_PRESENT)
+	if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
 		return 0;
 
-	if (!rc)
-		return rc;
+	if (!ret_val)
+		return ret_val;
 
 	/* Configure internal PHY for KR/KX. */
 	ixgbe_setup_kr_speed_x550em(hw, speed);
@@ -1509,10 +1590,10 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
 		return IXGBE_ERR_PHY_ADDR_INVALID;
 
 	/* Get external PHY device id */
-	rc = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
+	ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_GLOBAL_ID_MSB,
 				  IXGBE_MDIO_ZERO_DEV_TYPE, &reg_phy_ext);
-	if (rc)
-		return rc;
+	if (ret_val)
+		return ret_val;
 
 	/* When configuring quad port CS4223, the MAC instance is part
 	 * of the slice offset.
@@ -1625,7 +1706,7 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 		  __always_unused bool autoneg_wait_to_complete)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	u32 lval, sval;
+	u32 lval, sval, flx_val;
 	s32 rc;
 
 	rc = mac->ops.read_iosf_sb_reg(hw,
@@ -1659,11 +1740,31 @@ ixgbe_setup_sgmii(struct ixgbe_hw *hw, __always_unused ixgbe_link_speed speed,
 	if (rc)
 		return rc;
 
-	lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
+	if (rc)
+		return rc;
+
+	rc = mac->ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val);
+	if (rc)
+		return rc;
+
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G;
+	flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+	flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+
 	rc = mac->ops.write_iosf_sb_reg(hw,
-					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-					IXGBE_SB_IOSF_TARGET_KR_PHY, lval);
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val);
+	if (rc)
+		return rc;
 
+	rc = ixgbe_restart_an_internal_phy_x550em(hw);
 	return rc;
 }
 
@@ -2020,13 +2121,31 @@ static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw,
 	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 		reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX;
 
-	/* Restart auto-negotiation. */
-	reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
 	status = hw->mac.ops.write_iosf_sb_reg(hw,
 					IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
 					IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
 
-	return status;
+	if (hw->mac.type == ixgbe_mac_x550em_a) {
+		/* Set lane mode  to KR auto negotiation */
+		status = hw->mac.ops.read_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, &reg_val);
+
+		if (status)
+			return status;
+
+		reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK;
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN;
+		reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN;
+		reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN;
+		reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN;
+
+		status = hw->mac.ops.write_iosf_sb_reg(hw,
+				IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id),
+				IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
+	}
+
+	return ixgbe_restart_an_internal_phy_x550em(hw);
 }
 
 /** ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
@@ -2894,7 +3013,6 @@ static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw,
 static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
 {
 	s32 status = 0;
-	u32 link_ctrl = 0;
 	u32 an_cntl = 0;
 
 	/* Validate the requested mode */
@@ -2965,18 +3083,7 @@ static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
 					IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl);
 
 	/* Restart auto-negotiation. */
-	status = hw->mac.ops.read_iosf_sb_reg(hw,
-				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-				IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl);
-	if (status) {
-		hw_dbg(hw, "Auto-Negotiation did not complete\n");
-		return status;
-	}
-
-	link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
-	status = hw->mac.ops.write_iosf_sb_reg(hw,
-				IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
-				IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl);
+	status = ixgbe_restart_an_internal_phy_x550em(hw);
 
 	return status;
 }
@@ -3243,7 +3350,7 @@ static struct ixgbe_mac_operations mac_ops_x550em_a = {
 	.acquire_swfw_sync	= ixgbe_acquire_swfw_sync_x550em_a,
 	.release_swfw_sync	= ixgbe_release_swfw_sync_x550em_a,
 	.setup_fc		= ixgbe_setup_fc_x550em,
-	.fc_autoneg		= NULL, /* defined later */
+	.fc_autoneg		= ixgbe_fc_autoneg,
 	.read_iosf_sb_reg	= ixgbe_read_iosf_sb_reg_x550a,
 	.write_iosf_sb_reg	= ixgbe_write_iosf_sb_reg_x550a,
 };