igb: Remove GS40G specific defines/functions

The I210 internal PHY can be accessed just as well with the access
functions shared by 82580, I350, and I354 devices. A side effect of
relying on the common functions, is that I210 cable length support
is folded back into the common case which effectively reverts the
following commit:

    commit 59f301046b276f87483b3afa3201a4273def06a9
    Author: Carolyn Wyborny <carolyn.wyborny@intel.com>
    Date:   Wed Oct 10 04:42:59 2012 +0000

    igb: Update get cable length function for i210/i211

Cc: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 1 insertions, 81 deletions

diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index c0df40f2b295..c906826b6c02 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1719,30 +1719,10 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
 	u16 phy_data, phy_data2, index, default_page, is_cm;
 
 	switch (hw->phy.id) {
-	case I210_I_PHY_ID:
-		/* Get cable length from PHY Cable Diagnostics Control Reg */
-		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
-					    (I347AT4_PCDL + phy->addr),
-					    &phy_data);
-		if (ret_val)
-			return ret_val;
-
-		/* Check if the unit of cable length is meters or cm */
-		ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) +
-					    I347AT4_PCDC, &phy_data2);
-		if (ret_val)
-			return ret_val;
-
-		is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT);
-
-		/* Populate the phy structure with cable length in meters */
-		phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
-		phy->cable_length = phy_data / (is_cm ? 100 : 1);
-		break;
 	case M88E1543_E_PHY_ID:
 	case M88E1512_E_PHY_ID:
 	case I347AT4_E_PHY_ID:
+	case I210_I_PHY_ID:
 		/* Remember the original page select and set it to 7 */
 		ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
 					    &default_page);
@@ -2588,66 +2568,6 @@ out:
 }
 
 /**
- *  igb_write_phy_reg_gs40g - Write GS40G PHY register
- *  @hw: pointer to the HW structure
- *  @offset: lower half is register offset to write to
- *     upper half is page to use.
- *  @data: data to write at register offset
- *
- *  Acquires semaphore, if necessary, then writes the data to PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	s32 ret_val;
-	u16 page = offset >> GS40G_PAGE_SHIFT;
-
-	offset = offset & GS40G_OFFSET_MASK;
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-	if (ret_val)
-		goto release;
-	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-
-release:
-	hw->phy.ops.release(hw);
-	return ret_val;
-}
-
-/**
- *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
- *  @hw: pointer to the HW structure
- *  @offset: lower half is register offset to read to
- *     upper half is page to use.
- *  @data: data to read at register offset
- *
- *  Acquires semaphore, if necessary, then reads the data in the PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	s32 ret_val;
-	u16 page = offset >> GS40G_PAGE_SHIFT;
-
-	offset = offset & GS40G_OFFSET_MASK;
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
-	if (ret_val)
-		goto release;
-	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-
-release:
-	hw->phy.ops.release(hw);
-	return ret_val;
-}
-
-/**
  *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
  *  @hw: pointer to the HW structure
  *