ice: move reset functionality into ice_vf_lib.c

Now that the reset functions do not rely on Single Root specific
behavior, move the ice_reset_vf, ice_reset_all_vfs, and
ice_vf_rebuild_host_cfg functions and their dependent helper functions
out of ice_sriov.c and into ice_vf_lib.c

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 0 insertions, 475 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_sriov.c b/drivers/net/ethernet/intel/ice/ice_sriov.c
index b2376e3b746e..4a8cf8f646c8 100644
--- a/drivers/net/ethernet/intel/ice/ice_sriov.c
+++ b/drivers/net/ethernet/intel/ice/ice_sriov.c
@@ -467,37 +467,6 @@ void ice_free_vfs(struct ice_pf *pf)
 }
 
 /**
- * ice_trigger_vf_reset - Reset a VF on HW
- * @vf: pointer to the VF structure
- * @is_vflr: true if VFLR was issued, false if not
- * @is_pfr: true if the reset was triggered due to a previous PFR
- *
- * Trigger hardware to start a reset for a particular VF. Expects the caller
- * to wait the proper amount of time to allow hardware to reset the VF before
- * it cleans up and restores VF functionality.
- */
-static void ice_trigger_vf_reset(struct ice_vf *vf, bool is_vflr, bool is_pfr)
-{
-	/* Inform VF that it is no longer active, as a warning */
-	clear_bit(ICE_VF_STATE_ACTIVE, vf->vf_states);
-
-	/* Disable VF's configuration API during reset. The flag is re-enabled
-	 * when it's safe again to access VF's VSI.
-	 */
-	clear_bit(ICE_VF_STATE_INIT, vf->vf_states);
-
-	/* VF_MBX_ARQLEN and VF_MBX_ATQLEN are cleared by PFR, so the driver
-	 * needs to clear them in the case of VFR/VFLR. If this is done for
-	 * PFR, it can mess up VF resets because the VF driver may already
-	 * have started cleanup by the time we get here.
-	 */
-	if (!is_pfr)
-		vf->vf_ops->clear_mbx_register(vf);
-
-	vf->vf_ops->trigger_reset_register(vf, is_vflr);
-}
-
-/**
  * ice_vf_vsi_setup - Set up a VF VSI
  * @vf: VF to setup VSI for
  *
@@ -542,138 +511,6 @@ static int ice_calc_vf_first_vector_idx(struct ice_pf *pf, struct ice_vf *vf)
 }
 
 /**
- * ice_vf_rebuild_host_tx_rate_cfg - re-apply the Tx rate limiting configuration
- * @vf: VF to re-apply the configuration for
- *
- * Called after a VF VSI has been re-added/rebuild during reset. The PF driver
- * needs to re-apply the host configured Tx rate limiting configuration.
- */
-static int ice_vf_rebuild_host_tx_rate_cfg(struct ice_vf *vf)
-{
-	struct device *dev = ice_pf_to_dev(vf->pf);
-	struct ice_vsi *vsi = ice_get_vf_vsi(vf);
-	int err;
-
-	if (vf->min_tx_rate) {
-		err = ice_set_min_bw_limit(vsi, (u64)vf->min_tx_rate * 1000);
-		if (err) {
-			dev_err(dev, "failed to set min Tx rate to %d Mbps for VF %u, error %d\n",
-				vf->min_tx_rate, vf->vf_id, err);
-			return err;
-		}
-	}
-
-	if (vf->max_tx_rate) {
-		err = ice_set_max_bw_limit(vsi, (u64)vf->max_tx_rate * 1000);
-		if (err) {
-			dev_err(dev, "failed to set max Tx rate to %d Mbps for VF %u, error %d\n",
-				vf->max_tx_rate, vf->vf_id, err);
-			return err;
-		}
-	}
-
-	return 0;
-}
-
-/**
- * ice_vf_rebuild_host_vlan_cfg - add VLAN 0 filter or rebuild the Port VLAN
- * @vf: VF to add MAC filters for
- * @vsi: Pointer to VSI
- *
- * Called after a VF VSI has been re-added/rebuilt during reset. The PF driver
- * always re-adds either a VLAN 0 or port VLAN based filter after reset.
- */
-static int ice_vf_rebuild_host_vlan_cfg(struct ice_vf *vf, struct ice_vsi *vsi)
-{
-	struct ice_vsi_vlan_ops *vlan_ops = ice_get_compat_vsi_vlan_ops(vsi);
-	struct device *dev = ice_pf_to_dev(vf->pf);
-	int err;
-
-	if (ice_vf_is_port_vlan_ena(vf)) {
-		err = vlan_ops->set_port_vlan(vsi, &vf->port_vlan_info);
-		if (err) {
-			dev_err(dev, "failed to configure port VLAN via VSI parameters for VF %u, error %d\n",
-				vf->vf_id, err);
-			return err;
-		}
-
-		err = vlan_ops->add_vlan(vsi, &vf->port_vlan_info);
-	} else {
-		err = ice_vsi_add_vlan_zero(vsi);
-	}
-
-	if (err) {
-		dev_err(dev, "failed to add VLAN %u filter for VF %u during VF rebuild, error %d\n",
-			ice_vf_is_port_vlan_ena(vf) ?
-			ice_vf_get_port_vlan_id(vf) : 0, vf->vf_id, err);
-		return err;
-	}
-
-	err = vlan_ops->ena_rx_filtering(vsi);
-	if (err)
-		dev_warn(dev, "failed to enable Rx VLAN filtering for VF %d VSI %d during VF rebuild, error %d\n",
-			 vf->vf_id, vsi->idx, err);
-
-	return 0;
-}
-
-/**
- * ice_vf_rebuild_host_mac_cfg - add broadcast and the VF's perm_addr/LAA
- * @vf: VF to add MAC filters for
- *
- * Called after a VF VSI has been re-added/rebuilt during reset. The PF driver
- * always re-adds a broadcast filter and the VF's perm_addr/LAA after reset.
- */
-static int ice_vf_rebuild_host_mac_cfg(struct ice_vf *vf)
-{
-	struct device *dev = ice_pf_to_dev(vf->pf);
-	struct ice_vsi *vsi = ice_get_vf_vsi(vf);
-	u8 broadcast[ETH_ALEN];
-	int status;
-
-	if (ice_is_eswitch_mode_switchdev(vf->pf))
-		return 0;
-
-	eth_broadcast_addr(broadcast);
-	status = ice_fltr_add_mac(vsi, broadcast, ICE_FWD_TO_VSI);
-	if (status) {
-		dev_err(dev, "failed to add broadcast MAC filter for VF %u, error %d\n",
-			vf->vf_id, status);
-		return status;
-	}
-
-	vf->num_mac++;
-
-	if (is_valid_ether_addr(vf->hw_lan_addr.addr)) {
-		status = ice_fltr_add_mac(vsi, vf->hw_lan_addr.addr,
-					  ICE_FWD_TO_VSI);
-		if (status) {
-			dev_err(dev, "failed to add default unicast MAC filter %pM for VF %u, error %d\n",
-				&vf->hw_lan_addr.addr[0], vf->vf_id,
-				status);
-			return status;
-		}
-		vf->num_mac++;
-
-		ether_addr_copy(vf->dev_lan_addr.addr, vf->hw_lan_addr.addr);
-	}
-
-	return 0;
-}
-
-/**
- * ice_vf_set_host_trust_cfg - set trust setting based on pre-reset value
- * @vf: VF to configure trust setting for
- */
-static void ice_vf_set_host_trust_cfg(struct ice_vf *vf)
-{
-	if (vf->trusted)
-		set_bit(ICE_VIRTCHNL_VF_CAP_PRIVILEGE, &vf->vf_caps);
-	else
-		clear_bit(ICE_VIRTCHNL_VF_CAP_PRIVILEGE, &vf->vf_caps);
-}
-
-/**
  * ice_ena_vf_msix_mappings - enable VF MSIX mappings in hardware
  * @vf: VF to enable MSIX mappings for
  *
@@ -958,318 +795,6 @@ static int ice_set_per_vf_res(struct ice_pf *pf, u16 num_vfs)
 	return 0;
 }
 
-static void ice_vf_clear_counters(struct ice_vf *vf)
-{
-	struct ice_vsi *vsi = ice_get_vf_vsi(vf);
-
-	vf->num_mac = 0;
-	vsi->num_vlan = 0;
-	memset(&vf->mdd_tx_events, 0, sizeof(vf->mdd_tx_events));
-	memset(&vf->mdd_rx_events, 0, sizeof(vf->mdd_rx_events));
-}
-
-/**
- * ice_vf_pre_vsi_rebuild - tasks to be done prior to VSI rebuild
- * @vf: VF to perform pre VSI rebuild tasks
- *
- * These tasks are items that don't need to be amortized since they are most
- * likely called in a for loop with all VF(s) in the reset_all_vfs() case.
- */
-static void ice_vf_pre_vsi_rebuild(struct ice_vf *vf)
-{
-	ice_vf_clear_counters(vf);
-	vf->vf_ops->clear_reset_trigger(vf);
-}
-
-/**
- * ice_vf_rebuild_aggregator_node_cfg - rebuild aggregator node config
- * @vsi: Pointer to VSI
- *
- * This function moves VSI into corresponding scheduler aggregator node
- * based on cached value of "aggregator node info" per VSI
- */
-static void ice_vf_rebuild_aggregator_node_cfg(struct ice_vsi *vsi)
-{
-	struct ice_pf *pf = vsi->back;
-	struct device *dev;
-	int status;
-
-	if (!vsi->agg_node)
-		return;
-
-	dev = ice_pf_to_dev(pf);
-	if (vsi->agg_node->num_vsis == ICE_MAX_VSIS_IN_AGG_NODE) {
-		dev_dbg(dev,
-			"agg_id %u already has reached max_num_vsis %u\n",
-			vsi->agg_node->agg_id, vsi->agg_node->num_vsis);
-		return;
-	}
-
-	status = ice_move_vsi_to_agg(pf->hw.port_info, vsi->agg_node->agg_id,
-				     vsi->idx, vsi->tc_cfg.ena_tc);
-	if (status)
-		dev_dbg(dev, "unable to move VSI idx %u into aggregator %u node",
-			vsi->idx, vsi->agg_node->agg_id);
-	else
-		vsi->agg_node->num_vsis++;
-}
-
-/**
- * ice_vf_rebuild_host_cfg - host admin configuration is persistent across reset
- * @vf: VF to rebuild host configuration on
- */
-static void ice_vf_rebuild_host_cfg(struct ice_vf *vf)
-{
-	struct device *dev = ice_pf_to_dev(vf->pf);
-	struct ice_vsi *vsi = ice_get_vf_vsi(vf);
-
-	ice_vf_set_host_trust_cfg(vf);
-
-	if (ice_vf_rebuild_host_mac_cfg(vf))
-		dev_err(dev, "failed to rebuild default MAC configuration for VF %d\n",
-			vf->vf_id);
-
-	if (ice_vf_rebuild_host_vlan_cfg(vf, vsi))
-		dev_err(dev, "failed to rebuild VLAN configuration for VF %u\n",
-			vf->vf_id);
-
-	if (ice_vf_rebuild_host_tx_rate_cfg(vf))
-		dev_err(dev, "failed to rebuild Tx rate limiting configuration for VF %u\n",
-			vf->vf_id);
-
-	if (ice_vsi_apply_spoofchk(vsi, vf->spoofchk))
-		dev_err(dev, "failed to rebuild spoofchk configuration for VF %d\n",
-			vf->vf_id);
-
-	/* rebuild aggregator node config for main VF VSI */
-	ice_vf_rebuild_aggregator_node_cfg(vsi);
-}
-
-/**
- * ice_vf_rebuild_vsi - rebuild the VF's VSI
- * @vf: VF to rebuild the VSI for
- *
- * This is only called when all VF(s) are being reset (i.e. PCIe Reset on the
- * host, PFR, CORER, etc.).
- */
-static int ice_vf_rebuild_vsi(struct ice_vf *vf)
-{
-	struct ice_vsi *vsi = ice_get_vf_vsi(vf);
-	struct ice_pf *pf = vf->pf;
-
-	if (ice_vsi_rebuild(vsi, true)) {
-		dev_err(ice_pf_to_dev(pf), "failed to rebuild VF %d VSI\n",
-			vf->vf_id);
-		return -EIO;
-	}
-	/* vsi->idx will remain the same in this case so don't update
-	 * vf->lan_vsi_idx
-	 */
-	vsi->vsi_num = ice_get_hw_vsi_num(&pf->hw, vsi->idx);
-	vf->lan_vsi_num = vsi->vsi_num;
-
-	return 0;
-}
-
-/**
- * ice_reset_all_vfs - reset all allocated VFs in one go
- * @pf: pointer to the PF structure
- * @is_vflr: true if VFLR was issued, false if not
- *
- * First, tell the hardware to reset each VF, then do all the waiting in one
- * chunk, and finally finish restoring each VF after the wait. This is useful
- * during PF routines which need to reset all VFs, as otherwise it must perform
- * these resets in a serialized fashion.
- *
- * Returns true if any VFs were reset, and false otherwise.
- */
-bool ice_reset_all_vfs(struct ice_pf *pf, bool is_vflr)
-{
-	struct device *dev = ice_pf_to_dev(pf);
-	struct ice_hw *hw = &pf->hw;
-	struct ice_vf *vf;
-	unsigned int bkt;
-
-	/* If we don't have any VFs, then there is nothing to reset */
-	if (!ice_has_vfs(pf))
-		return false;
-
-	mutex_lock(&pf->vfs.table_lock);
-
-	/* clear all malicious info if the VFs are getting reset */
-	ice_for_each_vf(pf, bkt, vf)
-		if (ice_mbx_clear_malvf(&hw->mbx_snapshot, pf->vfs.malvfs,
-					ICE_MAX_SRIOV_VFS, vf->vf_id))
-			dev_dbg(dev, "failed to clear malicious VF state for VF %u\n",
-				vf->vf_id);
-
-	/* If VFs have been disabled, there is no need to reset */
-	if (test_and_set_bit(ICE_VF_DIS, pf->state)) {
-		mutex_unlock(&pf->vfs.table_lock);
-		return false;
-	}
-
-	/* Begin reset on all VFs at once */
-	ice_for_each_vf(pf, bkt, vf)
-		ice_trigger_vf_reset(vf, is_vflr, true);
-
-	/* HW requires some time to make sure it can flush the FIFO for a VF
-	 * when it resets it. Now that we've triggered all of the VFs, iterate
-	 * the table again and wait for each VF to complete.
-	 */
-	ice_for_each_vf(pf, bkt, vf) {
-		if (!vf->vf_ops->poll_reset_status(vf)) {
-			/* Display a warning if at least one VF didn't manage
-			 * to reset in time, but continue on with the
-			 * operation.
-			 */
-			dev_warn(dev, "VF %u reset check timeout\n", vf->vf_id);
-			break;
-		}
-	}
-
-	/* free VF resources to begin resetting the VSI state */
-	ice_for_each_vf(pf, bkt, vf) {
-		mutex_lock(&vf->cfg_lock);
-
-		vf->driver_caps = 0;
-		ice_vc_set_default_allowlist(vf);
-
-		ice_vf_fdir_exit(vf);
-		ice_vf_fdir_init(vf);
-		/* clean VF control VSI when resetting VFs since it should be
-		 * setup only when VF creates its first FDIR rule.
-		 */
-		if (vf->ctrl_vsi_idx != ICE_NO_VSI)
-			ice_vf_ctrl_invalidate_vsi(vf);
-
-		ice_vf_pre_vsi_rebuild(vf);
-		ice_vf_rebuild_vsi(vf);
-		vf->vf_ops->post_vsi_rebuild(vf);
-
-		mutex_unlock(&vf->cfg_lock);
-	}
-
-	if (ice_is_eswitch_mode_switchdev(pf))
-		if (ice_eswitch_rebuild(pf))
-			dev_warn(dev, "eswitch rebuild failed\n");
-
-	ice_flush(hw);
-	clear_bit(ICE_VF_DIS, pf->state);
-
-	mutex_unlock(&pf->vfs.table_lock);
-
-	return true;
-}
-
-/**
- * ice_reset_vf - Reset a particular VF
- * @vf: pointer to the VF structure
- * @is_vflr: true if VFLR was issued, false if not
- *
- * Returns true if the VF is currently in reset, resets successfully, or resets
- * are disabled and false otherwise.
- */
-bool ice_reset_vf(struct ice_vf *vf, bool is_vflr)
-{
-	struct ice_pf *pf = vf->pf;
-	struct ice_vsi *vsi;
-	struct device *dev;
-	struct ice_hw *hw;
-	u8 promisc_m;
-	bool rsd;
-
-	lockdep_assert_held(&vf->cfg_lock);
-
-	dev = ice_pf_to_dev(pf);
-	hw = &pf->hw;
-
-	if (test_bit(ICE_VF_RESETS_DISABLED, pf->state)) {
-		dev_dbg(dev, "Trying to reset VF %d, but all VF resets are disabled\n",
-			vf->vf_id);
-		return true;
-	}
-
-	if (ice_is_vf_disabled(vf)) {
-		dev_dbg(dev, "VF is already disabled, there is no need for resetting it, telling VM, all is fine %d\n",
-			vf->vf_id);
-		return true;
-	}
-
-	/* Set VF disable bit state here, before triggering reset */
-	set_bit(ICE_VF_STATE_DIS, vf->vf_states);
-	ice_trigger_vf_reset(vf, is_vflr, false);
-
-	vsi = ice_get_vf_vsi(vf);
-
-	ice_dis_vf_qs(vf);
-
-	/* Call Disable LAN Tx queue AQ whether or not queues are
-	 * enabled. This is needed for successful completion of VFR.
-	 */
-	ice_dis_vsi_txq(vsi->port_info, vsi->idx, 0, 0, NULL, NULL,
-			NULL, vf->vf_ops->reset_type, vf->vf_id, NULL);
-
-	/* poll VPGEN_VFRSTAT reg to make sure
-	 * that reset is complete
-	 */
-	rsd = vf->vf_ops->poll_reset_status(vf);
-
-	/* Display a warning if VF didn't manage to reset in time, but need to
-	 * continue on with the operation.
-	 */
-	if (!rsd)
-		dev_warn(dev, "VF reset check timeout on VF %d\n", vf->vf_id);
-
-	vf->driver_caps = 0;
-	ice_vc_set_default_allowlist(vf);
-
-	/* disable promiscuous modes in case they were enabled
-	 * ignore any error if disabling process failed
-	 */
-	if (test_bit(ICE_VF_STATE_UC_PROMISC, vf->vf_states) ||
-	    test_bit(ICE_VF_STATE_MC_PROMISC, vf->vf_states)) {
-		if (ice_vf_is_port_vlan_ena(vf) || vsi->num_vlan)
-			promisc_m = ICE_UCAST_VLAN_PROMISC_BITS;
-		else
-			promisc_m = ICE_UCAST_PROMISC_BITS;
-
-		if (ice_vf_clear_vsi_promisc(vf, vsi, promisc_m))
-			dev_err(dev, "disabling promiscuous mode failed\n");
-	}
-
-	ice_eswitch_del_vf_mac_rule(vf);
-
-	ice_vf_fdir_exit(vf);
-	ice_vf_fdir_init(vf);
-	/* clean VF control VSI when resetting VF since it should be setup
-	 * only when VF creates its first FDIR rule.
-	 */
-	if (vf->ctrl_vsi_idx != ICE_NO_VSI)
-		ice_vf_ctrl_vsi_release(vf);
-
-	ice_vf_pre_vsi_rebuild(vf);
-
-	if (vf->vf_ops->vsi_rebuild(vf)) {
-		dev_err(dev, "Failed to release and setup the VF%u's VSI\n",
-			vf->vf_id);
-		return false;
-	}
-
-	vf->vf_ops->post_vsi_rebuild(vf);
-	vsi = ice_get_vf_vsi(vf);
-	ice_eswitch_update_repr(vsi);
-	ice_eswitch_replay_vf_mac_rule(vf);
-
-	/* if the VF has been reset allow it to come up again */
-	if (ice_mbx_clear_malvf(&hw->mbx_snapshot, pf->vfs.malvfs,
-				ICE_MAX_SRIOV_VFS, vf->vf_id))
-		dev_dbg(dev, "failed to clear malicious VF state for VF %u\n",
-			vf->vf_id);
-
-	return true;
-}
-
 /**
  * ice_vc_notify_link_state - Inform all VFs on a PF of link status
  * @pf: pointer to the PF structure