diff options
| author | Willem de Bruijn <willemb@google.com> | 2017-08-25 11:06:26 -0400 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2017-10-10 09:00:48 -0700 |
| commit | 48072ae1ec7a1c778771cad8c1b8dd803c4992ab (patch) | |
| tree | 97773ed49cc1ca1969ff620d7dfe95da104dcec7 /drivers/net/ethernet/intel/e1000e/netdev.c | |
| parent | b10effb92e272051dd1ec0d7be56bf9ca85ab927 (diff) | |
| download | linux-48072ae1ec7a1c778771cad8c1b8dd803c4992ab.tar.bz2 | |
e1000e: apply burst mode settings only on default
Devices that support FLAG2_DMA_BURST have different default values
for RDTR and RADV. Apply burst mode default settings only when no
explicit value was passed at module load.
The RDTR default is zero. If the module is loaded for low latency
operation with RxIntDelay=0, do not override this value with a burst
default of 32.
Move the decision to apply burst values earlier, where explicitly
initialized module variables can be distinguished from defaults.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 8 |
1 files changed, 0 insertions, 8 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 14b096f3d1da..00f48d4cabec 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3242,14 +3242,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) */ ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE); ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE); - - /* override the delay timers for enabling bursting, only if - * the value was not set by the user via module options - */ - if (adapter->rx_int_delay == DEFAULT_RDTR) - adapter->rx_int_delay = BURST_RDTR; - if (adapter->rx_abs_int_delay == DEFAULT_RADV) - adapter->rx_abs_int_delay = BURST_RADV; } /* set the Receive Delay Timer Register */ |