summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/faraday
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2017-04-18 08:37:03 +1000
committerDavid S. Miller <davem@davemloft.net>2017-04-18 14:11:09 -0400
commitabcc3eb00e10af3a0c5df90ce515ebde5fc12319 (patch)
tree83900a9e9f9508904c13c3baa83b9a41ad674174 /drivers/net/ethernet/faraday
parent030d9828703ec7ecc09d09d39fb68b72f45b05e7 (diff)
downloadlinux-abcc3eb00e10af3a0c5df90ce515ebde5fc12319.tar.bz2
ftgmac100: Allow configuration of phy interface via device-tree
This uses the standard phy-mode property Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/faraday')
-rw-r--r--drivers/net/ethernet/faraday/ftgmac100.c42
1 files changed, 39 insertions, 3 deletions
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index f76765e0b243..7721c2ab24ef 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -34,6 +34,7 @@
#include <linux/property.h>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
+#include <linux/of_net.h>
#include <net/ip.h>
#include <net/ncsi.h>
@@ -1051,7 +1052,7 @@ static void ftgmac100_adjust_link(struct net_device *netdev)
schedule_work(&priv->reset_task);
}
-static int ftgmac100_mii_probe(struct ftgmac100 *priv)
+static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf)
{
struct net_device *netdev = priv->netdev;
struct phy_device *phydev;
@@ -1063,7 +1064,7 @@ static int ftgmac100_mii_probe(struct ftgmac100 *priv)
}
phydev = phy_connect(netdev, phydev_name(phydev),
- &ftgmac100_adjust_link, PHY_INTERFACE_MODE_GMII);
+ &ftgmac100_adjust_link, intf);
if (IS_ERR(phydev)) {
netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name);
@@ -1618,6 +1619,8 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
{
struct ftgmac100 *priv = netdev_priv(netdev);
struct platform_device *pdev = to_platform_device(priv->dev);
+ int phy_intf = PHY_INTERFACE_MODE_RGMII;
+ struct device_node *np = pdev->dev.of_node;
int i, err = 0;
u32 reg;
@@ -1633,6 +1636,39 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
iowrite32(reg, priv->base + FTGMAC100_OFFSET_REVR);
};
+ /* Get PHY mode from device-tree */
+ if (np) {
+ /* Default to RGMII. It's a gigabit part after all */
+ phy_intf = of_get_phy_mode(np);
+ if (phy_intf < 0)
+ phy_intf = PHY_INTERFACE_MODE_RGMII;
+
+ /* Aspeed only supports these. I don't know about other IP
+ * block vendors so I'm going to just let them through for
+ * now. Note that this is only a warning if for some obscure
+ * reason the DT really means to lie about it or it's a newer
+ * part we don't know about.
+ *
+ * On the Aspeed SoC there are additionally straps and SCU
+ * control bits that could tell us what the interface is
+ * (or allow us to configure it while the IP block is held
+ * in reset). For now I chose to keep this driver away from
+ * those SoC specific bits and assume the device-tree is
+ * right and the SCU has been configured properly by pinmux
+ * or the firmware.
+ */
+ if (priv->is_aspeed &&
+ phy_intf != PHY_INTERFACE_MODE_RMII &&
+ phy_intf != PHY_INTERFACE_MODE_RGMII &&
+ phy_intf != PHY_INTERFACE_MODE_RGMII_ID &&
+ phy_intf != PHY_INTERFACE_MODE_RGMII_RXID &&
+ phy_intf != PHY_INTERFACE_MODE_RGMII_TXID) {
+ netdev_warn(netdev,
+ "Unsupported PHY mode %s !\n",
+ phy_modes(phy_intf));
+ }
+ }
+
priv->mii_bus->name = "ftgmac100_mdio";
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d",
pdev->name, pdev->id);
@@ -1649,7 +1685,7 @@ static int ftgmac100_setup_mdio(struct net_device *netdev)
goto err_register_mdiobus;
}
- err = ftgmac100_mii_probe(priv);
+ err = ftgmac100_mii_probe(priv, phy_intf);
if (err) {
dev_err(priv->dev, "MII Probe failed!\n");
goto err_mii_probe;